8352 WELCOME MAINT TO OFFRS MD ACCN IN BWL UNDER GE (EAST) BAREILLY

Amount

Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.

Taking down shutter and refixing with easing in same opening of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggeregate) finished the surface even and smooth using extra cement as in floor complete all as specified and as directed.

M&L 15-18 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed

M & L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.

M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.

Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removing all foreign materials / Bitumenous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed by Engineer-in-charge.

M&L for providing ement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etec all as specified and directed by Engr in Charge

M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed including water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge.

M&L for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as given here in after (a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FP with minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method. (c ) Applying two coat of bituminous based aluminium paint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed by Engineer-in-charge. (d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminious paint applied by brushes only.

M&L for repairs to sunken floor slab with the following specifications:- (a) Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement. (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivelent for water proofing compound. (e) Graded Brick bats filling under sunken floor of required thickness as per site, (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment.

S & F in repair 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified as directed

S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick WPC factory made moulded door shutter consisting of solid core single leaf flush door of 25mm thickness, lipped with 15mm (5mmx3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails, The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and / or prelam colour on one side after routing the moulded design on flush door & 2mm plain and / prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc.completed as per specified and directed.

S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers the size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note :- S & F wire mess shall be measured and paid for separately)

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

M&L in repairs for machine pressesd coloured glazed chequered cement concrete tiles 25mm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed.

S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium specified and directed as appended below:- (i) Window frame :95x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing. (iv) Aluminium neccessary fittings complete as required. (v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F for 18 mm, prelaminated PVC board exterior grade with one side decorative lamination glossy finish & other side plain white as in shelves, sides, back and doors including PVC lipping on all exposed edges of same texture & shade to match that of laminate, fitted with piano hinges, wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified. Make- Rajshri/greenply/ centuryply Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Frame to be fixed to walls, soffits & base of cupboard with fasterners

S&F for 12 mm thick prelaminated PVC board exterior grade with one side decorative lamination glossy finish & other side plain as in cupboard shelves & partitions including fixing to wall, soffits & base of cupboard by powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified Make- Rajshri/greenply/ centuryply Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE.

S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complte all as specified.

M& L for repairing to existing rolling shutters of any size , replacing the bottom lock plate/bracket plates/crank handles/curtain / guide channel/hood cover/ lath section /pulling hooks/rollers/ of any other part of rolling shutters with new and including taking down and wellding of any part o rolling shutter (if required) at same place after making the shutter smooth functional with neccessary fittings required all as specified and directed..

S&F in repair 40mm dia cupboard Knobs fixed with necessary screws, nuts etc all as specified and directed

S & F in repair 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed

S & F in repair 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F in repair 150mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F in repair fancy type 200 mm size stainless steel handles, completed all as specified and directed.

S&F in repar 100 mm in size butt hinges medium weight stailess steel colled rolled complete all as specified and directed.

S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.

S&F in repair 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed

S&F in repair 300 mm long Stainless steel sliding door bolts( without locking arrangements) not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix with as welding complete all as specified and directed

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.

S&F for steel windows/ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Wire cloth shall be measured and paid for separately).

S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed. (Note :- Glass shall be measured and paid for separately).

M&L in repair for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including Hacking out old, broken glass (any thickness, size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all specified and as directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in M S window / wooden shutter complete all as specified and directed

S&F rotational moulded polethylene water tank of 1000 ltrs capacity, white coloured, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, white coloured, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.

Disconnecting existing tanks exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hositing if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).

S&F in repair service tank lid / cover of size 0.45 m dia and 0.20 m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity incl necessary nut, bolts washers and locking arrangement complete all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including CP 15mm dia swan neck pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all s directed. "Model :of Hindware or equivalent of Parryware, Cera .

S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified.

S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.

S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink & WHB fixing and connection to pipes complete all as directed.

S&F in repairs Brass chromium plated wall mixer 2 in 1 , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.

S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.

S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified.

S & F in repair fancy type 150mm size square brass CP shower rose all as specified.

S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.

S&F in repairs 15 mm dia bib tap cast copper alloy with butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all as specified as directed.

S&F in repair fancy type chromium plated brass two way Angle valve suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm, complete all as specified.

S & F in repairs fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed

S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.

S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed.

S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified.

S & F matt finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as spd and directed

S&F for stainless steel matt finish Hat peg set of five tier with necessary fitting completed all as specified and directed

S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified.

S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed.

S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Model: cat no 20076of Hindware, or equivalent Parryware, Cera.

S&F in repair vitreous China coloured European type WC with "P" or "S" trap 1st quality including connection to drain and fixing bolts and PVC sheet cover white complete all as specified. Make Hindware / parryware or equivalent Model: ACN 20011 (P/S) Jaquar or equivalent in Hindware, Parryware, Cera

S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. Model: Sleek fresh dual flush of Hindware or equivalent of Parryware, Cera or Jaquar"

S & F 15 mm dia CP health faucet with 1.0 Meter Long Flexible pipe and holder complete all as specified and directed Model :ALD 573 of Jaquar or equivalent in Hindware, Parryware, Cera

S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) cement complete all as specified and directed

S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) cement complete all as specified and directed

S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S & F in repairs of ISI marked waste fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed

S & F in repair 32mm dia PVC waste pipe for sinks/ basin and complete, all as specified.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.

S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. (Cat Part No. 551 of Make Prayag or equivalent model)

S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.

S & F for 1 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm), incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. Model : Cat No BA 711501- satin finish series Alma of Cera or equivalent of Parryware , Nirali , Pearls .

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed

S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed.

M & L for Post construction anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same as specified and directed.

M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete as specified and directed.

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.

S&Fin repairs Rubber strip 15mm, 75mm wide and 1200mm long

S&F Hafele Stainless Steel Security Door chain Antique finish 150mm Your security partner for home

S&F Adjustable 200 Degrees Wide Angle Peephole Door Viewer Peep Sight Hole Home Security (Cooper)

S&F in repair floor door stopper brass body and tongue with hard drawn steel spring complete all as specified and directed.

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as spd as directed

S & F in repairs for plastic seat cover (plastic water closet seat and cover) closed pattern with flat bottom and Mild Steel chromium plated or aluminized hinging device complete. all as specified.

M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying Two coat of oil bound distemper over a coat of putty complete all as specified and directed

M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper complete all as specified and directed

M & L for preparation of old plastered surfaces of ceiling including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper over a coat of putty complete all as specified and directed

M & L for preparation of old plastered surfaces of ceiling including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying two coat of oil bound distemper complete all as specified and directed

M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

M & L for preparing old plastered surfaces of wall incl removal of existing treatment and applying Two coat of white wash complete at any place /height such as room /stair case /common area etc all as specified and as directed

M & L for preparation of old painted wood or wood based surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M & L for preparation of old painted steel and iron surfaces of any description, not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

M & L for preparing new plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and as directed

M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty 1mm thick complete all as specified and as directed

S&F in repair for Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) Plain basket of size 510x470x100 or 520x485x100 mm OR 486X500X100 - 1 No

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) multi size plate basket of size 510x470x150 or 520x485x150 mm or 436 x 500 x200 mm ( clear depth 500 mm -01 Nos

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) cutlery basket,with perforated bottom & side of compacted /slots for holding cutlery of size 510x470x100 or 520 x485x100 mm or 144x 468 x50mm ( clear depth 500 mm of ) -01 Nos

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) Plain basket of size 510x470x200 or 520x485x200 mm or 486x500x200 mm -02 Nos

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) Pull out with 02 baskets each of size 150x485x80 or 100x485x80 mm -01 Nos ,

S&F in repair Stainless Steel (AISI 304 grade ) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) SS Dust bin ring -01 Nos,

S&F in repair Stainless Steel (AISI 304 grade) non magnetic multilayer nickel chrome plated for multipurpose utensils container of following size in each kitchen :- (a) Telescopic channels as required & including frame work ,handles etc as reqd & all as specified sample & design to be approved by GE.

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.

M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socke out let t point on same board board

One light point controlled by two Nos of 2 way switches

One 5A flush type switch socket point on independent board

All as per Srl item No 146 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified & as directed.

S&F switch piano flush type single pole, two way 5/6 Amps complete all as specified & as directed.

S&F switch piano flush type single pole, one way 15/16 Amps complete all as specified & as directed.

S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings complete all as specified & as directed.

Supply and Fixing in repairs buzzer, capton ding dong, AC, 230V, sigle pole complete all as specified & as directed.

Supply and fixing bell push switch flush type, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs socket outlet, 3/5 pin 5 amp flush type, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs socket outlet 2 in one, 3/5 pin 5 and 15 Amp flush type, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular switches 1 way, 6 A, 1 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular switches 1 way, 16 A, 1 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular sockets 6 A,-2/3 pin combined 2 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Modular switches 1 way, 6 A, 1 module, 240 Volts, complete all as specified & as directed.

Supply and Fixing in repairs Hylem sheet 3mm thick of size 8'' X 11'' including cutting of sheet for fixing switch / socket.

Supply and Fixing in repairs Hylem sheet 3mm thick of size 8'' x 5'' including cutting of sheet for fixing switch / socket, complete all as specified & as directed.

Supply and Fixing in repairs Hylem sheet 3mm thick of size 5'' x 5'' including cutting of sheet for fixing switch / socket, complete all as specified & as directed.

Supply and Fixing in repairs MCB SPN 20 to 32 Amps 240 volts.10kA , complete all as specified & as directed.

Supply and Fixing in repairs MCB SP 6 to 32 Amps 240 volts, 10 kA, complete all as specified & as directed.

Supply and Fixing in repairs MCB TPN 63 Amps,415V, 10kA, complete all as specified & as directed.

S &F in repair MCCB 16 kA,125 Amp thermal magnetic and electronic earth leakage module complete all as specified and directed.

M & L Sub main wiring concealed type with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 2.5 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

M & L Sub main wiring concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit).

S&F in replacement sheet metal enclosure DB's 415 Volts, IP-42, vertical suitable for mounting MCCB's, TPN, 4 way with 200 Amps rated copper bus bar complete all as directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 4 ways complete all as specified and directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways complete all as specified and directed.

Supply and Fixing in repairs double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.

S&F in replacement LED fitting with PVC extruded battern 20watt 4 feet White colour including dismentiling and taking down any type of FTL/LED complete all as specified and directed.

S&F in repairs building security light led type 20 W including GI angle of 20/25mm size of suitable size complete all as specified and directed.

S&F in replacement of PVC non metallic casing caping of 25 mm size with accessories including dismentaling/takingdown of old unserviceable/broken PVC conduit/cashing caping fixed on surface/concealed inclduing making good the disturbed surface complete all as specified and directed.

S&F LED mirror light fixture 9W LED 6000K complete all as specified and directed.

Supply and Fixing in repairs in replacement PVC insulated Flexible twin core,copper cable multistranded 24/.0020sqmm, 1100 V grade, complete all as specified & as directed.

Taking down and refixing ceiling fans 1200/1400 mm sweep & removing/cleaning of dust properly, oiling and greasing of bearing including re-fixing and connecting up with all requisite accessories complete all as specified and directed.

Taking down and rifixing exhaust fan of 450/300 mm sweep and removing/cleaning the dust properly including oiling and greasing complete all as directed.

Re-winding of ceiling fan burnt motor of 1200/1400 mm sweep including internally and externally cleaning of fans and removing the burnt coil and re-winding of fans by super enameled copper wire of appropriate size, make (ATLAS) or equivalent and re-assembling the fans and connecting with flexible copper wire of one mtr length and testing after repair complete all as specified and directed.

Re-winding of exhaust fan burnt motor of 450/300 mm sweep with appropriate size of super enameled copper wire, Make: ATLAS or equivalent including re-assembling the fans and connecting with flexible copper wire of one mtr length complete all as directed.

Supply and Fixing in repairs fan regulator resistance/electronic step piano type single phase 230 volt, complete all as specified & as directed.

Supply and Fixing in repairs Condenser 2.5 Mfd make universal/Usha /Bajaj/Epcos.

Supply and fixing name plate light smart decorative light of min. 6W of make C&S, Surya, Crompton or equivalent complete all as specified all as directed.

M&L for earthling complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directrly in ground (earth pit not less than 2.25 mtr deep blow GL with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of vharcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 32 x 6 connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GL earth strip and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type B1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 Mtr, Provision of charcoal and slat complete all as shown in electrical plate No 3 of schedule SSR Part-I. Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning filling, removing, PCC chamber pit RCC cover, test point etc.

Supply and fixing LED post top lantern with die cast aluminium spigot, spun aluminium powder coated top cover, Alumnium PDC heat sink, opal PC diffuser and clear acrylic Jupiter type of 40 watt, complete all as specified & as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVCinsulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. mm nominal cross section in service connections, complete all as specified & as directed.

Suply and fixing in repairs 1.5 sqmm FRLS multi-stranded copper wire as specified and directed.

Suply and fixing in repairs 2.5 sqmm FRLS multi-stranded copper wire as specified and directed.

Taking down of unserviceable bolt of existing geyser, M&L grouting of new bolt (tee type) at new place and refixing of geyser of any type and any capacity all as speified and directed.

M&L for replacement and re-filling of glass wool as per norms of different type of geysers complete all as specified and directed.

S&F in repairs heating element 2.0 KW as triangular type/ circular type as per sample all as directed.

S&F only new inner shell of geyser capacity 25/35 liters of suitable size made of copper sheet of 22 SWG complete with all suitable accessories complete all as specified and directed.

M&L for replacement of bottom cover in two parts of MS sheets not less than 22 gauge and pre treated in finished in white stove enameled paint as per existing size gauge in the geyser of any capacity/size complete all as specified and directed.

Supply only new safety pressure valve with vent to geysers as per latest ISI specification and directed.

M&L for Painting the outer surface of geyser capacity 25/35 ltrs as per original shade with two coats of synthetic enamel paint over a coat of primer by spray gun after scrapping the existing paint, denting etc. filling depression with putty and refixing the geyser in position including water/electric connection and testing complete all as specified and directed.

M&L for Brazing/ welding to inner copper tank at leaking spots up to five leakage of geyser of capacity 25/35/50 liters of any type and make of tank after checking up worn out nuts bolts and washers complete all as specified and directed.

S&F assemblly of geyser 25/35/50 ltr.capacity all as specified and directed.

Supply and Fixing in repairs Indicator lamp with new indicating lamp round/square, rectangular type as required at site, SP 230Volt all as specified and directed.

Supply and Fixing in repairs PVC connection flexible heavy grade 45 cm long complete with chromium plated flair nuts with washers at both ends suitable for GI tubing 15 mm bore complete all as specified and directed.

Supply and Fixing in repairs thermostat 0 to 90 degree, ISI marked, 15 Amps capacity automatic cut off at desired temp of suitable size for Geyser all as specified and directed.

Supply and Fixing in repairs Plug top 15 Amps all as specified and directed.

M/S ABHISHEK ENTERPRISES

shiv shakti contractor

NETRAPAL SINGH

ASIAN FOODS

M/S Gupta Builders

Quality Builders