Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | H1₹4.6 LAccepted-Finance BASSI UNDER BASSI POWER HOUSE DIVISION HPSEBL JOGINDER NAGAR | UNA | HIMACHAL PRADESH | 174301 | H1 | Accepted-Finance Qualified. | |
| 2 | H2₹4.2 L−₹47,466.80 (10.2%)Accepted-Finance BELOW SLAUGHTER HOUSE KRISHNA NAGER SHIMLA | SHIMLA | SHIMLA | HIMACHAL PRADESH | H2 | Accepted-Finance Qualified. | |
| 3 | H3₹3.8 L−₹85,615.20 (18.4%)Accepted-Finance NOT AVAILABLE | H3 | Accepted-Finance Qualified. |
| Sl No | Description | Qty | Unit | Ramesh Kumar H3 | SUNIL KUMAR H2 | Ankit Thakur Contractor H1 |
|---|---|---|---|---|---|---|
| 1.00Construction of 1 No. Type-I Quarter over existing Type-I Quarter at Trout Hachery Batahar , District Kullu (H.P.) | ||||||
| 1.01 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to floor level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 0.31 | Cubic Metre | 5,200 ₹1,612 Lowest | 7,000 ₹2,170 | 7,000 ₹2,170 |
| 1.02 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Suspended floors, roofs, landings, balconies and access platform as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 2.67 | Square metre | 150 ₹400.5 Lowest | 450 ₹1,201.5 | 475 ₹1,268.25 |
| 1.03 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls Under 20 cm wide as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 6.45 | Running metre | 40 ₹258 Lowest | 130 ₹838.5 | 120 ₹774 |
| 1.04 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor level Mild steel and Medium Tensile steel bars as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 34.1 | Kilogram | 85 ₹2,898.5 Lowest | 90 ₹3,069 | 100 ₹3,410 |
| 1.05 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 35 mm thick as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 13.5 | Square metre | 2,000 ₹27,000 Lowest | 2,600 ₹35,100 | 2,900 ₹39,150 |
| 1.06 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shuttersKiln seasoned and chemically treated hollock wood as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 8.27 | Square metre | 1,800 ₹14,886 Lowest | 2,650 ₹21,915.5 | 3,000 ₹24,810 |
| 1.07 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 5 | Each | 30 ₹150 Lowest | 350 ₹1,750 | 300 ₹1,500 |
| 1.08 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 10 | Each | 50 ₹500 Lowest | 90 ₹900 | 90 ₹900 |
| 1.09 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 44 | Each | 45 ₹1,980 Lowest | 50 ₹2,200 | 50 ₹2,200 |
Tender Value
₹4.8 L
EMD Value
₹9,500
Closing Date
25 Sept 2026, 10:30 amClosed
Chief Executive Officer HPAFMS
Directorate of Fisheries HP Matsya Bhawan Bilaspur
Construction of 1 No. Type-I Quarter over existing Type-I Quarter at Trout Hatchery Batahar, District Kullu (H.P.)
2026_HAFMS_143651_1
2026_HPAFMS_1963_1
Open Tender
Civil Works
Item Rate
90 days
Batahar Distt. Kullu (HP)
Please refer Tender documents.
5 documents required · 5 mandatory
₹350
Chief Executive Officer HPAFMS
₹9,500
29 Sept 2026
17 Sept 2026
25 Sept 2026
17 Sept 2026
25 Sept 2026
17 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Construction of 1 No. Type-I Quarter over existing Type-I Quarter at Trout Hachery Batahar , District Kullu (H.P.) | |||||
| 1.01 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to floor level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 0.31 | Cubic Metre | - | - |
| 1.02 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Suspended floors, roofs, landings, balconies and access platform as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 2.67 | Square metre | - | - |
| 1.03 | Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls Under 20 cm wide as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 6.45 | Running metre | - | - |
| 1.04 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor level Mild steel and Medium Tensile steel bars as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 34.1 | Kilogram | - | - |
| 1.05 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Kiln seasoned and chemically treated hollock wood 35 mm thick as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 13.5 | Square metre | - | - |
| 1.06 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shuttersKiln seasoned and chemically treated hollock wood as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 8.27 | Square metre | - | - |
| 1.07 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250x16 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 5 | Each | - | - |
| 1.08 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 250x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 10 | Each | - | - |
| 1.09 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 100x10 mm as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. | 44 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.30 MB
Tendernotice_2.pdf
PDF • 2.13 MB
Tendernotice_3.pdf
PDF • 36.80 MB
BOQ_213477.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .