SPECIAL REPAIR TO BLDG NO P-2 AT 28 R AND O FLT OTM ACCN UNDER GE MISAMARI

Amount

Demolition Cement Concrete (un-reinforced) of any description (Roof Padding. etc) and in any position not otherwise specifically provided for, complete all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off shutter from the frame) not exc. 1.50 Sqm Each, complete all as specified and as directed.

Taking down Chowkat or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but not exc 4.00 Sqm Each, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab/Blankets of any thickness, etc. including cover fillets of any descrip-tion, complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed.

Dismentling AC/CGI/PGI (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Taking down Cement Plaster of any description on brick walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc., complete all as specified and as directed.

M&l Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M & L for joint free non-skid ceramic colour tiles 300 x 300, 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for joint free glazed ceramic colour tiles 300 x 600mm, 7 to 8mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match with tiles over and incld. 10mm thick screed plaster in CM 1:4, complete all as specified and directed.

M & L for joint free non-skid ceramic colour tiles 600x600, 10mm thick, in floors & skirting etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including screed bed or bedding layer 15 mm thick in CM (1:6) complete all as specified and directed.

M & L for joint free non-skid ceramic colour tiles 600x150, 7-8mm thick, in floors & skirting etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including screed bed or bedding layer 10 mm thick in CM (1:4) complete all as specified and directed.

M&L for Rendering 15mm thick in cement mortar 1:6 on INTERNAL fair faces of Brick walls or on concrete surfaces, finished fair and even, complete all as specified and as directed.

M&L for 15mm thick rendering in Cement Mortar 1:4 on External Fair Faces of Brick Walls or on Concrete Surfaces plastered Surfaces Finished fair and even, complete all as specified and as directed

M&L for Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, etc., plastered surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying two coats of exterior weather proof paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coats of exterior weather proof paint over a coat of primer, complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed.

M&L for complete removal of existing treatment of old plastered surface of wall and applying two coat of oil bound distemper over a coat of 1mm average thick wall putty, all as specified & directed..

M & L for preparation of old plastered Surfaces of ceiling and applying one Coats of White Wash complete all as specified and directed.

M&L preparing newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

S&F factory made flush shutters, 30mm thick, solid core construction with block board core & ply wood face panels, commercial type on both side incl 30X 6mm thick 2nd class HW lipping on edge,complete all as spd & directed.

S & F factory made IInd Class HW 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

M&L for powder coated (Min thickness of powder coating 50 micron) anodised aluminium frame for door/windows/ ventilators with one or more rebates incl jointing cleats etc complete

M&L for powder coated (Min thickness of powder coating 50 micron) aluminium 2 track sliding window of aluminium sections weighing n. less than 0.55 kg/m incl jointing cleats glazing clips, rubber packing, locking attangement, PVC beading, screws etc

S&F powder coated 8 mm thick aluminum grill fixed over aluminium frame with screws incl aluminium U-channel complete

S&F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 sqm in each pane complete all as specified and directed.

S & F figured glass pin headed type, 3 mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F for 100mm size stainless steel butt hinges all as specified and directed.

S&F for 300mm mild steel ordinary rat tail pattern springs incl roller plate complete as specified.

Mild steel sliding door bolts 300mm,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed.

M & L prepration of new wooden surfaces and applying two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth complete.

M&L for prepration of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

S&F 600x600mmx4mm thick designer 'E' board classic as in false ceiling including S & F 'Tee" grid frame work made of special section of MS galvanized sheet , consisting angle cleats of size 25mm wide 1.6mm thick fixed to RCC/CGI roofing with dash fastener or wrapping the suspending wire around the existing wooden/steel purlin/rafter for suspending grid frame work suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid with the help of level clip. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including taking down existing unserviceable false ceiling.

M&L Cement Concrete 1:2:4 (12.5 mm graded aggre-gate) 25mm thick in Roof Padding after brushing with Cement Slurry @ 3.0 Kg Cement per Sqm, complete all as specified and as directed.

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications, complete all as specified and as directed (a). Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade 2 (except felt) (b). APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. (c) Applying two coats of Aluminium Paint over APP based Polymeric Membrane.

Taking up or down Steel Tubing 15mm bore complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore complete all as specified and as directed.

M&L 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed

M&L 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors

S&F Bib Tap 15mm bore (dia), Cast Copper Alloy, Fancy type Chromium Plated with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.

S&F Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.

S&F in repair Angle cock 15mm bore fancy type Chromium Plated , concealed type screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions and fixed complete all as specified and as directed

S&F Vitreous China White Squatting Pan, ‘ORISSA’ Pattern of size 580x440 mm with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan incluiding provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces and fixed-in-repairs, complete all as specified and as directed.

M&L PVC Flushing Cistern 10 Litre capacity White, Low Level, valve less, syphonic action type with Inlet, Ball Valve, Float and handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in ends, Making Good disturbed surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3 and fixed-in-repairs, complete all as specified and as directed.

S & F vitreous China urinal, flat back, half stall type whitewhite/ivory colour, with grating and union for discharge including connection to flushing pipe and outgoing waste pipe, complete all as specified and directed.

S&F PVC Connection 15mm size with PTMT Nuts of length 450mm and fixed-in-repairs, complete all as specified and as directed.

S & F PVC waste pipe of 32mm dia complete

S&F Brass Chromium plated Shower Rose 125mm size, with or without Swivel Joints, and fixing to Steel Pipe or Union and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs Brass Chromium plated Tubular Towel Rail, 20mm dia, D-type, 60 Cm long, complete all as specified and as directed.

S&F PTMT Grating Doom 125mm dia (minimum weight 40 Grams) and fixed-in-repairs, complete all as specified and as directed.

S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Singe Socketed, in any length with Rubber Ring Joints fixed to Walls including taking up/down unserviceable Pipe, Fittings, etc., complete all as specified and as directed.

S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Singe Socketed, in any length with Rubber Ring Joints fixed to Walls including taking up/down unserviceable Pipe, Fittings, etc., complete all as specified and as directed.

S&F in repair for PVC (SWR) Gully Trap 125/110mm,setting and jointed with Solvent Cement, complete all as specified and as directed.

Demolition of re-inforcment cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M&L for RCC (Nominal Mix) Type B1 1:2:4 (20 mm graded aggregate) as Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified

S&F TMT bars 10 mm dia and over cut to length, bent to shape as required incl cranking bending hooking ends and binding with mild steel wire (annealed ) not less than 0.9 mm dia complete all as specified and as directed.

S&F TMT bar 5 mm dia and over upto and incl 10 mm dia in Nibs, stirrups spacers etc cut to length bent to shape requred incl cranking, bending hooking ends binding with mild steel wire (annealed) not less than 0.9 mm dia confirming to grade I IS-432 (part I) complete all as specified and as directed

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick Flat,rough finished surface of concrete,complete all as specified and as directed.

M & L 75mm thick PCC 1:3:6 Type C2 using 40mm graded aggregate as in plinth protection/path complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface complete all as directed by Engr-in-Charge.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge.

Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge.

Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed.

M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for One light point controlled by one, one way switch 5 Amps

-Ditto- all as per item No. 75 but specified for One ceiling fan / exhaust fan point controlled by one , one way switch and regulator

-Ditto- all as per item No. 75 but specified for One 3 point 5 Amps socket outlets point controlled by one switch on the same board

-Ditto- all as per item No. 75 but specified for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board

Description all as per item No 75 here in before but for one light point controlled by one, two way switch 5 Amps

All as per item No 75 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.

S & F Switch piano flush type single pole one way 5 Amp, 230 Volts complete all as specified.

S & F Modular switch piano single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed.

S & F Socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and directed.

S & F Switch socket combination flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts complete all as specified

S&F Switch socket combination 2 in 1 3 pin, 15 Amp flush type universal.

S&F ceilling rose three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified

S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified.

S & F Lamp holder with insulated body, with back plate suitable for batten fittings complete all as directed.

S&F Decorative wall light fixture made up of polycarbonate suitable for 10W LED Lamp complete all as specified.Make- Philips , Model - Comet Wall Light 30575 and equivalent in Havells and Surya.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Surya.

S & F sheet metal enclosure MCB VTPN 8 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 125 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed.Make- L&T, Cat No: DBVTH008DD and equivalent in Legrand and Indo Asian.

S & F MCCB 4 Pole 415 volts 125 Amps with thermal - magnetic release with breaking capacity 36 KA and with adjustable overload setting complete all as specified. Type- DN2-250D Model:-CM92108OOL1OG, Make:- L&T and equivalent in Legrand and Indo Asian.

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified. Make:- L&T, Model -DBSPN006D and equivalent in Legrand and Indo Asian.

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.Make- L&T, Cat No: BB20320C or equivalent in Schinder/ Legrand.

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060C,BB10100C,BB10160C and equivalent in Schinder/ Legrand.

S & F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed by Engineer-in-Charge.Model -REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Surya, all as specifed and directed.

S & F wall mounted LED 10 watts ,Batten type T 5 Mirror light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting ,Make Havells, or equivalent in CG, Surya, all as specifed and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - ENDURAPEARLSL15WLED757SASYTOPCMP Or Equivalent in CG and Surya all as specified and directed.

Excavation in trenches n exc 1.50 m wide and n exc 1.50 m depth in soft /loose soil and getting out for lying of cable and errection pipe etc complete all as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed.

M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.

Supply & Laying LT heavy duty UG Cable of size 50 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab and equivalent in Havells and KEI

S & F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.

S&F Bulk head in die cast aluminium housing & frosted glass suitable for 1 x 8W LED complete all as specified. Model - RUGBY, LHKL01160099 , Make:- Havells and equivalent in Surya and CG.

Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed.

M&L for replacement Sub main wiring 2 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

BEE KAAY TRADERS

bkgeneralstores

M/S Mahabir Traders

Sunrise Enterprise

M/S Himalayan Trading Co

Markson