TENDERS FOR PROVIDING PROJECT MANAGEMENT CONSULTANCY SERVICES AS 3RD PARTY PMC & INSPECTION FOR ALL CIVIL CONSTRUCTION WORKS, TO BE TAKEN UP IN KALABURAGI, YADGIR, ALAND, CHITTAPUR AND SEDAM CITIES OF KALABURAGI AND YADGIR DISTRICTS

NAME OF WORK:-PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, SEDAM TOWN SITUATED AT SEDAM. TQ; SEDAM & DIST; KALABURAGI

(As per para 133 of K.P.W.D)

Cerified that I shri Assistant Executive Engineer, Sub Division Sedam has personally, visited the site and prepared the estimate using the sanctioned PWD schedule of rates of relevant Circle and providing for the most economical and safe way of executing the work.

Section Officer Assistant Executive Engineer

PWD Sub- Division, Sedam

CERTIFICATE PDFGYM

(As certified vide G.O No. PWD SL CMS 96 Dt. 27-06-1991)

Certified that suffficient care has been taken while preparing the estimates in respect

of the above mentioned work to see that necessary items which are technically required for the work

in sufficient quantity as per site condition are included while preparing the estimate, and

specification of items included are required and correct.

Certified that the work proposed in this estimate has not been taken up under any other

head/ programme by any agency. The said work are not been included/proposed/over lapped

in any other proposed programme.

Assistant Executive Engineer Executive Engineer

PWD Sub- Division, Sedam PWD Division, Sedam

(PARAGRAPH 130 (a) OF THE KARNATAKA PUBLIC WORKS DEPARTMENTAL CODE)

ESTIMATE FACE SHEET

DIVISION :- PWD DIVISION, Kalaburagi

Sub-Division :- PWD SUB DIVISION, Chittapur

Sanctioned Estimate No:

Service Head :-

Departmental Head :-

The estimate is prepared with the Office of the Assistant Executive Engineeer , PWD Sub-Division, Chittapur and for the office of the Executive Engineer, PWD Division, Kalaburagi.

NAME OF WORK:-PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, CHITTAPUR TOWN SITUATED AT CHITTAPUR. TQ; CHITTAPUR & DIST; KALABURAGI

Administrative Approved under :-

Technically Sanctioned under :-

Estimate prepared by :-

& checked by :- Section Officer

Assistant Executive Engineer Executive Engineer

PWD Sub- Division, Chittapur PWD Division, Kalaburagi

DETAILED AND ABSTRACT ESTIMATE

NAME OF WORK:- PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, YADGIR TOWN SITUATED AT APMC PLOT NO. 231 OF YADGIR, TQ: YADGIR & DIST YADGIR.

KYDCCBL/2025-26/BD/WORK_INDENT1

SL NO DESCRIPTION NOS L B D QTY UNIT RATE AMOUNT

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth. (PWD Common SR 2023-2024,Vol-1, It No.1.12 Page No. 8)

Basic Rate Rs. 95.00

5% Area Specific Loading Rs. 4.75

Final Rate Rs. 99.75

2 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth.(PWD Common SR 2023-2024,Vol-1, It No.1.4.1 Page No. 5)

EXACAVATION FOR FOOTINGS FOUNDATION 0.15M EXTRA @ BOTH SIDE

Basic Rate Rs. 242.00

5% Area Specific Loading Rs. 12.10

Final Rate Rs. 254.10

3 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (PWD Common SR 2023-2024,Vol-1, It No. 1.16.2 Page No. 9) In Hard Rock ( requiring blasting) Depth upto 1.50m

EXACAVATION FOR FOOTINGS FOUNDATION (0.15m EXTRA ON BOTH SIDE) Avg, Depth

Basic Rate Rs. 623.00

5% Area Specific Loading Rs. 31.15

Final Rate Rs. 654.15

4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.(PWD Common SR 2023-2024,Vol-1, It No.2.1.4 Page No. 15)

PCC BED CONCRETE

FOR FOOTING PCC BED (0'-6'' EXTRA ON BOTH SIDE)

PCC FOR INNER PLINTH BEAM

HORIZONTAL WALLS

FLOORING PCC 4.27 B

STRONG ROOM 1 2.45 3.05 0.10 0.74

MEETING HALL 1 3.65 3.05 0.10 1.11

BRANCH MANAGER 1 3.05 3.05 0.10 0.93

WORKING AREA 1 5.10 2.15 0.10 1.09

WAITING HALL 1 6.00 3.90 0.10 2.34

PARKING AREA 1 11.40 4.25 0.10 4.84

PARAPET WALL TOP COOPING 1 42.70 0.23 0.10 0.98

Basic Rate Rs. 6217.00

5% Area Specific Loading Rs. 310.85

Final Rate Rs. 6527.85

5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.2.3 Page No. 15)

FOOTING CONCRETE

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (8%) Rs. 506.88

Total Rs. 6842.88

5% Area Specific Loading Rs. 342.14

Final Rate Rs. 7185.02

6 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (70%) 4536.00

Total Rs. 11016.00

5% Area Specific Loading Rs. 550.80

Final Rate Rs. 11566.80

7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

FOR RCC WALL FOR STRONG ROOM

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (10%) 648.00

Total Rs. 7128.00

5% Area Specific Loading Rs. 356.40

Final Rate Rs. 7484.40

8 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD Common SR 2023-2024,Vol-1, It No.1.9 Page No. 7)

EXACAVATION FOR FOOTINGS FOUNDATION

EXCAVATION IN HARD ROCK

PCC BED CONCRETE

FOR FOOTING PCC BED (0.15m EXTRA ON BOTH SIDE)

FOOTING CONCRETE

RUBBLE STONE MASONRY

NECK COLUMNS UPTO G.L

Required Filling Total 63.09 Cum 279.30 17621.00

Basic Rate Rs. 266.00

5% Area Specific Loading Rs. 13.30

Final Rate Rs. 279.30

9 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-1, It No.1.8 Page No. 7)

Basic Rate Rs. 474.00

5% Area Specific Loading Rs. 23.70

Final Rate Rs. 497.70

10 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-2, It No.4.1 Page No. 5)

BUILT UP AREA 1 15.00 11.60 174.00

Basic Rate Rs. 118.00

5% Area Specific Loading Rs. 5.90

Final Rate Rs. 123.90

11 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.4.3 Page No. 16)

FOR PLINTH BEAMS

HORIZONTAL WALLS

STAIRCASE AREA 1 & 2

1st FLIGHT & 2nd FLIGHT

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (50%) 3168.00

Total Rs. 9504.00

5% Area Specific Loading Rs. 475.20

Final Rate Rs. 9979.20

12 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

COLUMNS PLINTH BEAM TOP TO ROOF BEAM BOTTOM

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (70%) 4790.10

Total Rs. 11633.10

5% Area Specific Loading Rs. 581.66

Final Rate Rs. 12214.76

13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

FOR LINTEL BEAMS

LINTEL BEAM ON 0.23 WALL

PARTITION WALLS

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

STAIRCASE AREA -1 5.00 1.80 0.15 -1.35

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (50%) 3421.50

Total Rs. 10264.50

5% Area Specific Loading Rs. 513.23

Final Rate Rs. 10777.73

16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (45%) 3079.35

Total Rs. 9922.35

5% Area Specific Loading Rs. 496.12

Final Rate Rs. 10418.47

17 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Buildings) (PWD Common SR 2023-2024,Vol-1, It No.2.11 (a) Page No. 18)

GROUND FLOOR Concrete kg/Cum

PLINTH BEAMS & STAIRCASE 12.16 90.00 1094.40

ROOF BEAMS 8.63 140.00 1208.20

RCC WALL STRONG ROOM 9.13 100.00 913.00

Basic Rate Rs. 89457.00

5% Area Specific Loading Rs. 4472.85

Final Rate Rs. 93929.85

18 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.7 Page No. 13)

BASEMENT WALL 1 43.20 0.23 0.60 5.96

STAIRCASE SIDE WALL 2 5.00 0.23 2.15 4.94

STAIRCASE SIDE WALL 2 1.80 0.23 2.15 1.78

PARAPET WALL 1 43.20 0.23 0.90 8.94

RAMP & MAIN ENTRANCE 1 3.00 3.00 0.45 4.05

Basic Rate Rs. 8211.00

5% Area Specific Loading Rs. 410.55

Final Rate Rs. 8621.55

19 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.14 Page No. 14)

PARTITION WALLS

STORE ROOM & RDO 1 12.80 3.35 42.88

Basic Rate Rs. 1060.00

5% Area Specific Loading Rs. 53.00

Final Rate Rs. 1113.00

20 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD Common SR 2023-2024,Vol-2, It No.12.11 Page No. 99)

Basic Rate Rs. 138074.00

5% Area Specific Loading Rs. 6903.70

Final Rate Rs. 144977.70

21 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common SR 2023-2024,Vol-2, It No.11.34(b) Page No. 86)

MS HAND RAILING 1 9.75 0.90 8.77

21.00 Kgs/Sqm 21.14 Sqm

Basic Rate Rs. 183.00

5% Area Specific Loading Rs. 9.15

Final Rate Rs. 192.15

22 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.12.51 Page No. 104)

Basic Rate Rs. 1016.00

5% Area Specific Loading Rs. 50.80

Final Rate Rs. 1066.80

23 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide (PWD Common SR 2023-2024,Vol-2, It No.8.16.3 Page No. 44)

PLASTER MESH 1 300.00 300.00

Basic Rate Rs. 44.00

5% Area Specific Loading Rs. 2.20

Final Rate Rs. 46.20

24 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.10 Page No. 43)

PLASTER TO CEILING

STRONG ROOM 1 2.45 3.05 7.47

STORE ROOM 1 3.00 2.05 6.15

MEETING HALL 1 3.65 3.05 11.13

BRANCH MANAGER 1 3.05 3.05 9.30

WORKING AREA & WAITING HALL 1 6.00 6.00 36.00

BEAMS SIDE 2 6.00 0.23 0.00

BEAMS SIDE 2 6.00 0.23 0.00

FRONT PORCH 1 9.75 1.80 17.55

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 211.00

5% Area Specific Loading Rs. 10.55

Final Rate Rs. 221.55

25 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD Common SR 2023-2024,Vol-2, It No.8.2.1 Page No. 41)

PLASTER TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 2.05 3.20 13.12

LONG WALL 2 0.90 2.15 3.87

SHORT WALL 2 2.05 2.15 8.81

TOILET LOFT TOP

LONG WALL 2 0.90 0.90 1.62

SHORT WALL 2 2.05 0.90 3.69

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 6.00 3.20 38.40

SHORT WALL 2 3.05 3.20 19.52

Basic Rate Rs. 295.00

5% Area Specific Loading Rs. 14.75

Final Rate Rs. 309.75

26 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.3.1 Page No. 41)

PLASTER TO EXTERNAL WALLS

SHORT WALL 2 9.75 6.58 128.31

SLAB PROJECTIONS

SHORT WALL 1 9.75 0.15 1.46

Basic Rate Rs. 354.00

5% Area Specific Loading Rs. 17.70

Final Rate Rs. 371.70

27 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (PWD Common SR 2023-2024,Vol-2, It No.9.22.2 Page No. 62) Size of the Tiles 600 x 600mm

VITRIFIED TILES IN ROOMS

STRONG ROOM 1 2.45 3.05 7.47

SKIRTING 1 10.10 0.10 1.01

STORE ROOM 1 3.00 2.05 6.15

SKIRTING 1 9.20 0.10 0.92

MEETING HALL 1 3.65 3.05 11.13

SKIRTING 1 12.50 0.10 1.25

SKIRTING 1 3.85 0.10 0.38

BRANCH MANAGER 1 3.05 3.05 9.30

SKIRTING 1 11.30 0.10 1.13

SKIRTING 1 11.00 0.10 1.10

D/OPENINGS 3 0.90 0.23 0.62

Basic Rate Rs. 1326.00

5% Area Specific Loading Rs. 66.30

Final Rate Rs. 1392.30

28 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD Common SR 2023-2024,Vol-2, It No.9.24 Page No. 63)

GRANITE FLOORING @ LOBBY & PASSAGE AREA

WORKING AREA & WAITING HALL 1 6.00 6.00 36.00

SKIRTING 1 19.80 0.10 1.98

GRANITE FOR STAIRCASE

SKIRTING 2 3.60 0.15 1.08

MAIN ENTRANCE STEPS

TOP LANDING 1 5.50 1.80 9.90

Basic Rate Rs. 2852.00

5% Area Specific Loading Rs. 142.60

Final Rate Rs. 2994.60

29 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.10.2 Page No. 69)

WINDOWS CLADDING

GRANITE FOR STAIRCASE

TREADS 20 0.90 18.00

MAIN ENTRANCE STEPS

TREADS 3 1.80 5.40

Basic Rate Rs. 328.00

5% Area Specific Loading Rs. 16.40

Final Rate Rs. 344.40

30 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (PWD Common SR 2023-2024,Vol-2, It No.9.10 Page No. 60)

CERAMIC TILES IN TOILET

DOOR CILL 1 0.90 0.15 0.13

Basic Rate Rs. 1106.00

5% Area Specific Loading Rs. 55.30

Final Rate Rs. 1161.30

31 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.9.39 Page No. 65)

WALL TILES TO TOILET

LONG WALL 2 0.90 2.10 3.78

SHORT WALL 2 2.05 2.10 8.61

DOOR SIDE 2 0.15 2.10 0.63

Basic Rate Rs. 1449.00

5% Area Specific Loading Rs. 72.45

Final Rate Rs. 1521.45

32 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main ""T"" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ""T"" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ""T"" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ""T"" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ""T"" runners to be suspended from ceiling using GI slotted cleats of size 27 x37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/m2 (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.(PWD Common SR 2023-2024,Vol-2, It No.7.40.2 Page No. 27)

PLASTER TO CEILING

STRONG ROOM 1 2.45 3.05 7.47

MEETING HALL 1 3.65 3.05 11.13

BRANCH MANAGER 1 3.05 3.05 9.30

WORKING AREA & WAITING HALL 1 6.00 6.00 36.00

FRONT PORCH 1 9.75 1.80 17.55

Basic Rate Rs. 1710.00

5% Area Specific Loading Rs. 85.50

Final Rate Rs. 1795.50

33 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD Common SR 2023-2024,Vol-2, It No.12.17 Page No. 100)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 7085.00

5% Area Specific Loading Rs. 354.25

Final Rate Rs. 7439.25

34 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. (PWD Common SR 2023-2024,Vol-2, It No.12.57.2 Page No. 105) do- 30 mm thick one side teak and one side commercial

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 3493.00

5% Area Specific Loading Rs. 174.65

Final Rate Rs. 3667.65

35 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.90 Page No. 110)

Basic Rate Rs. 6734.00

5% Area Specific Loading Rs. 336.70

Final Rate Rs. 7070.70

36 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.85 Page No. 109)

Basic Rate Rs. 5719.00

5% Area Specific Loading Rs. 285.95

Final Rate Rs. 6004.95

37 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD Common SR 2023-2024,Vol-2, It No.11.11.1 Page No. 79)

Z TYPE VENTILATORS

26.00 Kgs/Sqm 5.13 Sqm

Basic Rate Rs. 148.00

5% Area Specific Loading Rs. 7.40

Final Rate Rs. 155.40

38 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) (PWD Common SR 2023-2024,Vol-2, It No.12.93 Page No. 111)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 702.00

5% Area Specific Loading Rs. 35.10

Final Rate Rs. 737.10

39 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/ mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately).(PWD Common SR 2023-2024,Vol-2, It No.12.95 Page No. 112)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 4411.00

5% Area Specific Loading Rs. 220.55

Final Rate Rs. 4631.55

40 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD Common SR 2023-2024,Vol-2, It No.8.5.1 Page No. 50)

WALL PUTTY TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 2.05 3.20 13.12

LONG WALL 2 0.90 2.15 3.87

SHORT WALL 2 2.05 2.15 8.81

TOILET LOFT TOP

LONG WALL 2 0.90 0.90 1.62

SHORT WALL 2 2.05 0.90 3.69

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 6.00 3.20 38.40

SHORT WALL 2 3.05 3.20 19.52

FRONT PORCH 1 9.75 1.80 17.55

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 100.00

5% Area Specific Loading Rs. 5.00

Final Rate Rs. 105.00

41 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.27 Page No. 45)

PRIMER TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 2.05 3.20 13.12

LONG WALL 2 0.90 2.15 3.87

SHORT WALL 2 2.05 2.15 8.81

TOILET LOFT TOP

LONG WALL 2 0.90 0.90 1.62

SHORT WALL 2 2.05 0.90 3.69

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 6.00 3.20 38.40

SHORT WALL 2 3.05 3.20 19.52

FRONT PORCH 1 9.75 1.80 17.55

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 53.00

5% Area Specific Loading Rs. 2.65

Final Rate Rs. 55.65

42 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-char (PWD Common SR 2023-2024,Vol-2, It No.8.39 Page No. 46)

EMULSION PAINT TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 2.05 3.20 13.12

LONG WALL 2 0.90 2.15 3.87

SHORT WALL 2 2.05 2.15 8.81

TOILET LOFT TOP

LONG WALL 2 0.90 0.90 1.62

SHORT WALL 2 2.05 0.90 3.69

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 6.00 3.20 38.40

SHORT WALL 2 3.05 3.20 19.52

FRONT PORCH 1 9.75 1.80 17.55

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 127.00

5% Area Specific Loading Rs. 6.35

Final Rate Rs. 133.35

43 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.31 Page No. 46)

PAINT TO EXTERNAL WALLS

SHORT WALL 2 9.75 6.58 128.31

SLAB PROJECTIONS

SHORT WALL 1 9.75 0.15 1.46

Basic Rate Rs. 178.00

5% Area Specific Loading Rs. 8.90

Final Rate Rs. 186.90

44 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common SR 2023-2024,Vol-2, It No.11.28 Page No. 85)

5.00 Kgs/Ft 20.00 Mtr

Basic Rate Rs. 565.00

5% Area Specific Loading Rs. 28.25

Final Rate Rs. 593.25

45 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.41 Page No. 48)

ROLLING SHUTTER 1 1.50 2.15 3.22

Basic Rate Rs. 167.00

5% Area Specific Loading Rs. 8.35

Final Rate Rs. 175.35

46 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.33.2 Page No. 46)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 138.00

5% Area Specific Loading Rs. 6.90

Final Rate Rs. 144.90

47 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete .(PWD Common SR 2023-2024,Vol-2, It No.11.6.1 Page No. 78)

ROLLING SHUTTERS 1 1.70 2.10 3.57

Basic Rate Rs. 2633.00

5% Area Specific Loading Rs. 131.65

Final Rate Rs. 2764.65

48 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..(PWD Common SR 2023-2024,Vol-2, It No.12.60 Page No. 105)

FOR DOORS 4 4.00

Basic Rate Rs. 1052.00

5% Area Specific Loading Rs. 52.60

Final Rate Rs. 1104.60

49 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.61 Page No. 105)

FOR DOORS 4 4.00

Basic Rate Rs. 990.00

5% Area Specific Loading Rs. 49.50

Final Rate Rs. 1039.50

50 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.62 Page No. 105)

FOR DOORS 4 4.00

Total 4.00 Each 248.85 995.00

Basic Rate Rs. 237.00

5% Area Specific Loading Rs. 11.85

Final Rate Rs. 248.85

51 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.(PWD Common SR 2023-2024,Vol-2, It No.22.9.a Page No. 218)

FOR DOORS 4 4.00

Basic Rate Rs. 1500.00

5% Area Specific Loading Rs. 75.00

Final Rate Rs. 1575.00

52 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.(PWD Common SR 2023-2024,Vol-2, It No.22.15.7 Page No. 219)

FOR DOORS 8 8.00

Total 8.00 Each 210.00 1680.00

Basic Rate Rs. 200.00

5% Area Specific Loading Rs. 10.00

Final Rate Rs. 210.00

53 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.65 Page No. 59)

FOR DOORS 4 4.00

Total 4.00 Each 61.95 248.00

Basic Rate Rs. 59.00

5% Area Specific Loading Rs. 2.95

Final Rate Rs. 61.95

54 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc.complete.125mm.(PWD Common SR 2023-2024,Vol-2, It No.12.70.2 Page No. 106)

FOR DOORS 16 16.00

Basic Rate Rs. 280.00

5% Area Specific Loading Rs. 14.00

Final Rate Rs. 294.00

55 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD Common SR 2023-2024,Vol-1, It No.15.1 Page No. 149)

STAIRCASE AREA -1 5.00 1.80 -9.00

Basic Rate Rs. 817.00

5% Area Specific Loading Rs. 40.85

Final Rate Rs. 857.85

56 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth.(PWD Common SR 2023-2024,Vol-1, It No.1.4.1 Page No. 5)

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 53.00 0.75 0.75 29.81

Basic Rate Rs. 242.00

5% Area Specific Loading Rs. 12.10

Final Rate Rs. 254.10

57 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.(PWD Common SR 2023-2024,Vol-1, It No.2.1.4 Page No. 15)

PCC BED CONCRETE

AROUND RSM WALL 1 53.00 0.75 0.15 5.96

SSM WALL TOP COOPING 1 53.00 0.45 0.10 2.38

Basic Rate Rs. 6217.00

5% Area Specific Loading Rs. 310.85

Final Rate Rs. 6527.85

58 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR 2023-2024,Vol-2, It No.5.1.1 Page No. 9)

RUBBLE STONE MASONRY

AROUND RSM WALL 1 53.00 0.60 0.60 19.08

Basic Rate Rs. 5611.00

5% Area Specific Loading Rs. 280.55

Final Rate Rs. 5891.55

59 Providing Size Stone masonry with hard stone in foundation and plinth Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR 2023-2024,Vol-2, It No.5.4 Page No. 9)

RUBBLE STONE MASONRY

AROUND RSM WALL 1 53.00 0.45 0.45 10.73

Basic Rate Rs. 6389.00

5% Area Specific Loading Rs. 319.45

Final Rate Rs. 6708.45

60 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.7 Page No. 13)

GRILL OPENINGS -21 2.50 0.23 0.90 -10.86

Basic Rate Rs. 8211.00

5% Area Specific Loading Rs. 410.55

Final Rate Rs. 8621.55

61 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common SR 2023-2024,Vol-2, It No.11.34(b) Page No. 86)

26.00 Kgs/Sqm 50.25 Sqm

Basic Rate Rs. 183.00

5% Area Specific Loading Rs. 9.15

Final Rate Rs. 192.15

62 Providing Raised and cut pointing: Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.17.2 Page No. 44)

PLASTER TO EXTERNAL WALLS

AROUND WALL 2 53.00 0.55 58.30

Basic Rate Rs. 280.00

5% Area Specific Loading Rs. 14.00

Final Rate Rs. 294.00

63 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.3.1 Page No. 41)

PLASTER TO EXTERNAL WALLS

AROUND WALL 2 53.00 4.43 469.58

GRILL OPENINGS -20 2.50 0.90 -45.00

Basic Rate Rs. 354.00

5% Area Specific Loading Rs. 17.70

Final Rate Rs. 371.70

64 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.31 Page No. 46)

PAINT TO EXTERNAL WALLS

AROUND WALL 2 53.00 5.00 530.00

GRILL OPENINGS -20 2.50 0.90 -45.00

Basic Rate Rs. 178.00

5% Area Specific Loading Rs. 8.90

Final Rate Rs. 186.90

65 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.41 Page No. 48)

Basic Rate Rs. 167.00

5% Area Specific Loading Rs. 8.35

Final Rate Rs. 175.35

66 Precast Cement Concrete Interlocking Blocks Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid in required pattern and including over 30mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-incharge. (WMM/WBM Base to be paid separately if necessary as .(PWD Common SR 2023-2024,Vol-3, It No.6.8.1 Page No. 51)

INTERLOCKING PAVERS

FRONT PARKING 1 9.75 2.45 23.88

FRONT PARKING 1 3.50 1.80 6.30

Basic Rate Rs. 1068.00

5% Area Specific Loading Rs. 53.40

Final Rate Rs. 1121.40

TOTAL AMOUNT TOTAL Rs. 4640671.00

67 Add 3% For Electrification TOTAL Rs. 139220.00

68 Add 2% For Water Supply & Sanitary Work TOTAL Rs. 92813.00

69 Add 1% For Architectural & Consultant 1% Charges TOTAL Rs. 46407.00

70 Add 1% for 3rd Party Charges TOTAL Rs. 46407.00

SUB TOTAL AMOUNT TOTAL Rs. 4965518.00

71 Add 18% GST TOTAL Rs. 893793.00

GRAND TOTAL AMOUNT TOTAL Rs. 5859311.00

72 Add L.S TOTAL Rs. 40689.00

GRAND TOTAL AMOUNT TOTAL Rs. 5900000.00

Section Officer Asst. Executive Engineer

PWD,Sub Division,

DETAILED AND ABSTRACT ESTIMATE

NAME OF WORK:- PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, ALAND TOWN SITUATED AT APMC PLOT NO. 405 OF ALAND.TQ; ALAND & DIST; KALABURAGI

KYDCCBL/2025-26/BD/WORK_INDENT2

SL NO DESCRIPTION NOS L B D QTY UNIT RATE AMOUNT

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth. (PWD Common SR 2023-2024,Vol-1, It No.1.12 Page No. 8)

Basic Rate Rs. 95.00

5% Area Specific Loading Rs. 4.75

Final Rate Rs. 99.75

2 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth.(PWD Common SR 2023-2024,Vol-1, It No.1.4.1 Page No. 5)

EXACAVATION FOR FOOTINGS FOUNDATION 0.15M EXTRA @ BOTH SIDE

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 72.20 0.75 0.75 40.61

Basic Rate Rs. 242.00

5% Area Specific Loading Rs. 12.10

Final Rate Rs. 254.10

3 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (PWD Common SR 2023-2024,Vol-1, It No. 1.16.2 Page No. 9) In Hard Rock ( requiring blasting) Depth upto 1.50m

EXACAVATION FOR FOOTINGS FOUNDATION (0.15m EXTRA ON BOTH SIDE) Avg, Depth

Basic Rate Rs. 623.00

5% Area Specific Loading Rs. 31.15

Final Rate Rs. 654.15

4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.(PWD Common SR 2023-2024,Vol-1, It No.2.1.4 Page No. 15)

PCC BED CONCRETE

FOR FOOTING PCC BED (0'-6'' EXTRA ON BOTH SIDE)

PCC FOR INNER PLINTH BEAM

HORIZONTAL WALLS

FLOORING PCC 5.95 B

STRONG ROOM 1 2.75 3.05 0.10 0.83

MEETING HALL 1 4.72 3.05 0.10 1.43

BRANCH MANAGER 1 2.75 3.05 0.10 0.83

SERVER ROOM 1 1.75 3.05 0.10 0.53

WORKING AREA & WAITING HALL 1 8.85 5.70 0.10 5.04

STAIRCASE AREA 1 4.40 1.80 0.10 0.79

PARAPET WALL TOP COOPING 1 48.00 0.23 0.10 1.10

AROUND RSM WALL 1 72.20 0.75 0.15 8.12

Basic Rate Rs. 6217.00

5% Area Specific Loading Rs. 310.85

Final Rate Rs. 6527.85

5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.2.3 Page No. 15)

FOOTING CONCRETE

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (8%) Rs. 506.88

Total Rs. 6842.88

5% Area Specific Loading Rs. 342.14

Final Rate Rs. 7185.02

6 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR 2023-2024,Vol-2, It No.5.1.1 Page No. 9)

RUBBLE STONE MASONRY

AROUND RSM WALL 1 72.20 0.50 0.60 21.66

Basic Rate Rs. 5611.00

5% Area Specific Loading Rs. 280.55

Final Rate Rs. 5891.55

7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (70%) 4536.00

Total Rs. 11016.00

5% Area Specific Loading Rs. 550.80

Final Rate Rs. 11566.80

8 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

FOR RCC WALL FOR STRONG ROOM

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (10%) 648.00

Total Rs. 7128.00

5% Area Specific Loading Rs. 356.40

Final Rate Rs. 7484.40

9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD Common SR 2023-2024,Vol-1, It No.1.9 Page No. 7)

EXACAVATION FOR FOOTINGS FOUNDATION

EXCAVATION IN HARD ROCK

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 72.20 0.75 0.75 40.61

PCC BED CONCRETE

FOR FOOTING PCC BED (0.15m EXTRA ON BOTH SIDE)

AROUND RSM WALL -1 72.20 0.75 0.15 -8.12

FOOTING CONCRETE

RUBBLE STONE MASONRY

AROUND RSM WALL -1 72.20 0.60 0.60 -25.99

NECK COLUMNS UPTO G.L

Required Filling Total 76.06 Cum 279.30 21244.00

Basic Rate Rs. 266.00

5% Area Specific Loading Rs. 13.30

Final Rate Rs. 279.30

10 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-1, It No.1.8 Page No. 7)

Basic Rate Rs. 474.00

5% Area Specific Loading Rs. 23.70

Final Rate Rs. 497.70

11 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-2, It No.4.1 Page No. 5)

BUILT UP AREA 1 10.80 12.25 132.30

Basic Rate Rs. 118.00

5% Area Specific Loading Rs. 5.90

Final Rate Rs. 123.90

12 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.4.3 Page No. 16)

FOR PLINTH BEAMS

HORIZONTAL WALLS

STAIRCASE AREA 1 & 2

1st FLIGHT & 2nd FLIGHT

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (50%) 3168.00

Total Rs. 9504.00

5% Area Specific Loading Rs. 475.20

Final Rate Rs. 9979.20

13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

COLUMNS PLINTH BEAM TOP TO ROOF BEAM BOTTOM

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (70%) 4790.10

Total Rs. 11633.10

5% Area Specific Loading Rs. 581.66

Final Rate Rs. 12214.76

14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

FOR LINTEL BEAMS

LINTEL BEAM ON 0.23 WALL

PARTITION WALLS

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

STAIRCASE AREA -1 4.40 1.80 0.15 -1.18

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (50%) 3421.50

Total Rs. 10264.50

5% Area Specific Loading Rs. 513.23

Final Rate Rs. 10777.73

17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (45%) 3079.35

Total Rs. 9922.35

5% Area Specific Loading Rs. 496.12

Final Rate Rs. 10418.47

18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Buildings) (PWD Common SR 2023-2024,Vol-1, It No.2.11 (a) Page No. 18)

GROUND FLOOR Concrete kg/Cum

PLINTH BEAMS & STAIRCASE 15.14 90.00 1362.60

RCC WALL STRONG ROOM 9.78 100.00 978.00

Basic Rate Rs. 89457.00

5% Area Specific Loading Rs. 4472.85

Final Rate Rs. 93929.85

19 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.7 Page No. 13)

BASEMENT WALL 1 48.00 0.23 0.60 6.62

STAIRCASE SIDE WALL 2 5.00 0.23 2.15 4.94

STAIRCASE SIDE WALL 2 1.80 0.23 2.15 1.78

PARAPET WALL 1 48.00 0.23 0.90 9.93

RAMP & MAIN ENTRANCE 1 3.00 3.00 0.45 4.05

Basic Rate Rs. 8211.00

5% Area Specific Loading Rs. 410.55

Final Rate Rs. 8621.55

20 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.14 Page No. 14)

PARTITION WALLS

Basic Rate Rs. 1060.00

5% Area Specific Loading Rs. 53.00

Final Rate Rs. 1113.00

21 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD Common SR 2023-2024,Vol-2, It No.12.11 Page No. 99)

Basic Rate Rs. 138074.00

5% Area Specific Loading Rs. 6903.70

Final Rate Rs. 144977.70

22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common SR 2023-2024,Vol-2, It No.11.34(b) Page No. 86)

21.00 Kgs/Sqm 11.65 Sqm

Basic Rate Rs. 183.00

5% Area Specific Loading Rs. 9.15

Final Rate Rs. 192.15

23 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.12.51 Page No. 104)

Basic Rate Rs. 1016.00

5% Area Specific Loading Rs. 50.80

Final Rate Rs. 1066.80

24 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide (PWD Common SR 2023-2024,Vol-2, It No.8.16.3 Page No. 44)

PLASTER MESH 1 450.00 450.00

Basic Rate Rs. 44.00

5% Area Specific Loading Rs. 2.20

Final Rate Rs. 46.20

25 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.10 Page No. 43)

PLASTER TO CEILING

STRONG ROOM 1 2.75 3.05 8.38

MEETING HALL 1 4.72 3.05 14.39

STORE ROOM 1 2.90 3.05 8.84

BRANCH MANAGER 1 2.75 3.05 8.38

SERVER ROOM 1 1.75 3.05 5.33

WORKING AREA & WAITING HALL 1 8.85 5.70 50.44

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 211.00

5% Area Specific Loading Rs. 10.55

Final Rate Rs. 221.55

26 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD Common SR 2023-2024,Vol-2, It No.8.2.1 Page No. 41)

PLASTER TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 1.45 3.20 9.28

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 5.70 3.20 36.48

LONG WALL 2 1.90 2.15 8.17

SHORT WALL 2 1.20 2.15 5.16

TOILET LOFT TOP

LONG WALL 2 1.90 0.90 3.42

SHORT WALL 2 1.20 0.90 2.16

SHORT WALL 2 1.80 3.20 11.52

Basic Rate Rs. 295.00

5% Area Specific Loading Rs. 14.75

Final Rate Rs. 309.75

27 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.3.1 Page No. 41)

PLASTER TO EXTERNAL WALLS

SHORT WALL 2 11.30 6.58 148.70

SLAB PROJECTIONS

SHORT WALL 2 11.30 0.15 3.39

Basic Rate Rs. 354.00

5% Area Specific Loading Rs. 17.70

Final Rate Rs. 371.70

28 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (PWD Common SR 2023-2024,Vol-2, It No.9.22.2 Page No. 62) Size of the Tiles 600 x 600mm

VITRIFIED TILES IN ROOMS

STRONG ROOM 1 2.75 3.05 8.38

SKIRTING 1 10.85 0.10 1.08

MEETING HALL 1 4.72 3.05 14.39

SKIRTING 1 14.50 0.10 1.45

STORE ROOM 1 2.90 3.05 8.84

SKIRTING 1 11.15 0.10 1.11

BRANCH MANAGER 1 2.75 3.05 8.38

SKIRTING 1 10.85 0.10 1.08

SKIRTING 1 6.56 0.10 0.65

SKIRTING 1 11.45 0.10 1.14

SERVER ROOM 1 1.75 3.05 5.33

SKIRTING 1 8.85 0.10 0.88

STAIRCASE AREA 1 4.65 1.80 8.37

SKIRTING 1 11.62 0.10 1.16

D/OPENINGS 6 0.90 0.23 1.24

OPENINGS CILL 2 1.45 0.23 0.66

Basic Rate Rs. 1326.00

5% Area Specific Loading Rs. 66.30

Final Rate Rs. 1392.30

29 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD Common SR 2023-2024,Vol-2, It No.9.24 Page No. 63)

GRANITE FLOORING @ LOBBY & PASSAGE AREA

WORKING AREA & WAITING HALL 1 8.85 5.70 50.44

SKIRTING 1 23.46 0.10 2.34

GRANITE FOR STAIRCASE

SKIRTING 2 3.60 0.15 1.08

MAIN ENTRANCE STEPS

TOP LANDING 1 3.00 1.80 5.40

Basic Rate Rs. 2852.00

5% Area Specific Loading Rs. 142.60

Final Rate Rs. 2994.60

30 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.10.2 Page No. 69)

WINDOWS CLADDING

GRANITE FOR STAIRCASE

TREADS 20 0.90 18.00

MAIN ENTRANCE STEPS

TREADS 2 1.80 3.60

Basic Rate Rs. 328.00

5% Area Specific Loading Rs. 16.40

Final Rate Rs. 344.40

31 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (PWD Common SR 2023-2024,Vol-2, It No.9.10 Page No. 60)

CERAMIC TILES IN TOILET

DOOR CILL 1 0.75 0.15 0.11

Basic Rate Rs. 1106.00

5% Area Specific Loading Rs. 55.30

Final Rate Rs. 1161.30

32 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.9.39 Page No. 65)

WALL TILES TO TOILET

LONG WALL 2 1.90 2.10 7.98

SHORT WALL 2 1.20 2.10 5.04

DOOR SIDE 2 0.15 2.10 0.63

Basic Rate Rs. 1449.00

5% Area Specific Loading Rs. 72.45

Final Rate Rs. 1521.45

33 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main ""T"" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ""T"" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ""T"" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ""T"" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ""T"" runners to be suspended from ceiling using GI slotted cleats of size 27 x37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/m2 (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.(PWD Common SR 2023-2024,Vol-2, It No.7.40.2 Page No. 27)

PLASTER TO CEILING

STRONG ROOM 1 2.75 3.05 8.38

MEETING HALL 1 4.72 3.05 14.39

BRANCH MANAGER 1 2.75 3.05 8.38

WORKING AREA & WAITING HALL 1 8.85 5.70 50.44

FRONT PORCH 1 3.00 2.00 6.00

Basic Rate Rs. 1710.00

5% Area Specific Loading Rs. 85.50

Final Rate Rs. 1795.50

34 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD Common SR 2023-2024,Vol-2, It No.12.17 Page No. 100)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 7085.00

5% Area Specific Loading Rs. 354.25

Final Rate Rs. 7439.25

35 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. (PWD Common SR 2023-2024,Vol-2, It No.12.57.2 Page No. 105) do- 30 mm thick one side teak and one side commercial

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 3493.00

5% Area Specific Loading Rs. 174.65

Final Rate Rs. 3667.65

36 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.90 Page No. 110)

Basic Rate Rs. 6734.00

5% Area Specific Loading Rs. 336.70

Final Rate Rs. 7070.70

37 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.85 Page No. 109)

Basic Rate Rs. 5719.00

5% Area Specific Loading Rs. 285.95

Final Rate Rs. 6004.95

38 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD Common SR 2023-2024,Vol-2, It No.11.11.1 Page No. 79)

Z TYPE VENTILATORS

26.00 Kgs/Sqm 4.86 Sqm

Basic Rate Rs. 148.00

5% Area Specific Loading Rs. 7.40

Final Rate Rs. 155.40

39 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) (PWD Common SR 2023-2024,Vol-2, It No.12.93 Page No. 111)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 702.00

5% Area Specific Loading Rs. 35.10

Final Rate Rs. 737.10

40 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/ mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately).(PWD Common SR 2023-2024,Vol-2, It No.12.95 Page No. 112)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 4411.00

5% Area Specific Loading Rs. 220.55

Final Rate Rs. 4631.55

41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD Common SR 2023-2024,Vol-2, It No.8.5.1 Page No. 50)

WALL PUTTY TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 1.45 3.20 9.28

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 5.70 3.20 36.48

LONG WALL 2 1.90 2.15 8.17

SHORT WALL 2 1.20 2.15 5.16

TOILET LOFT TOP

LONG WALL 2 1.90 0.90 3.42

SHORT WALL 2 1.20 0.90 2.16

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 2.90 3.05 8.84

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 100.00

5% Area Specific Loading Rs. 5.00

Final Rate Rs. 105.00

42 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.27 Page No. 45)

PRIMER TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 1.45 3.20 9.28

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 5.70 3.20 36.48

LONG WALL 2 1.90 2.15 8.17

SHORT WALL 2 1.20 2.15 5.16

TOILET LOFT TOP

LONG WALL 2 1.90 0.90 3.42

SHORT WALL 2 1.20 0.90 2.16

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 2.90 3.05 8.84

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 53.00

5% Area Specific Loading Rs. 2.65

Final Rate Rs. 55.65

43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-char (PWD Common SR 2023-2024,Vol-2, It No.8.39 Page No. 46)

EMULSION PAINT TO INTERNAL WALLS

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 1.45 3.20 9.28

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

SHORT WALL 2 3.05 3.20 19.52

LONG WALL 2 0.90 3.20 5.76

SHORT WALL 2 3.05 3.20 19.52

WORKING & WAITING AREA

SHORT WALL 2 5.70 3.20 36.48

LONG WALL 2 1.90 2.15 8.17

SHORT WALL 2 1.20 2.15 5.16

TOILET LOFT TOP

LONG WALL 2 1.90 0.90 3.42

SHORT WALL 2 1.20 0.90 2.16

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 2.90 3.05 8.84

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 127.00

5% Area Specific Loading Rs. 6.35

Final Rate Rs. 133.35

44 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.31 Page No. 46)

PAINT TO EXTERNAL WALLS

SHORT WALL 2 11.30 6.58 148.70

SLAB PROJECTIONS

SHORT WALL 2 11.30 0.15 3.39

Basic Rate Rs. 178.00

5% Area Specific Loading Rs. 8.90

Final Rate Rs. 186.90

45 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common SR 2023-2024,Vol-2, It No.11.28 Page No. 85)

5.00 Kgs/Ft 20.00 Mtr

Basic Rate Rs. 565.00

5% Area Specific Loading Rs. 28.25

Final Rate Rs. 593.25

46 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.41 Page No. 48)

ROLLING SHUTTER 1 1.50 2.15 3.22

Basic Rate Rs. 167.00

5% Area Specific Loading Rs. 8.35

Final Rate Rs. 175.35

47 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.33.2 Page No. 46)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 138.00

5% Area Specific Loading Rs. 6.90

Final Rate Rs. 144.90

48 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete .(PWD Common SR 2023-2024,Vol-2, It No.11.6.1 Page No. 78)

ROLLING SHUTTERS 1 1.70 2.10 3.57

Basic Rate Rs. 2633.00

5% Area Specific Loading Rs. 131.65

Final Rate Rs. 2764.65

49 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..(PWD Common SR 2023-2024,Vol-2, It No.12.60 Page No. 105)

FOR DOORS 6 6.00

Basic Rate Rs. 1052.00

5% Area Specific Loading Rs. 52.60

Final Rate Rs. 1104.60

50 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.61 Page No. 105)

FOR DOORS 6 6.00

Basic Rate Rs. 990.00

5% Area Specific Loading Rs. 49.50

Final Rate Rs. 1039.50

51 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.62 Page No. 105)

FOR DOORS 6 6.00

Total 6.00 Each 248.85 1493.00

Basic Rate Rs. 237.00

5% Area Specific Loading Rs. 11.85

Final Rate Rs. 248.85

52 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.(PWD Common SR 2023-2024,Vol-2, It No.22.9.a Page No. 218)

FOR DOORS 6 6.00

Basic Rate Rs. 1500.00

5% Area Specific Loading Rs. 75.00

Final Rate Rs. 1575.00

53 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.(PWD Common SR 2023-2024,Vol-2, It No.22.15.7 Page No. 219)

FOR DOORS 12 12.00

Basic Rate Rs. 200.00

5% Area Specific Loading Rs. 10.00

Final Rate Rs. 210.00

54 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.65 Page No. 59)

FOR DOORS 6 6.00

Total 6.00 Each 61.95 372.00

Basic Rate Rs. 59.00

5% Area Specific Loading Rs. 2.95

Final Rate Rs. 61.95

55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc.complete.125mm.(PWD Common SR 2023-2024,Vol-2, It No.12.70.2 Page No. 106)

FOR DOORS 24 24.00

Basic Rate Rs. 280.00

5% Area Specific Loading Rs. 14.00

Final Rate Rs. 294.00

56 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD Common SR 2023-2024,Vol-1, It No.15.1 Page No. 149)

STAIRCASE AREA -1 4.40 1.80 -7.92

Basic Rate Rs. 817.00

5% Area Specific Loading Rs. 40.85

Final Rate Rs. 857.85

TOTAL AMOUNT TOTAL Rs. 4564826.00

57 Add 3% For Electrification TOTAL Rs. 136945.00

58 Add 2% For Water Supply & Sanitary Work TOTAL Rs. 91297.00

59 Add 1% For Architectural & Consultant 1% Charges TOTAL Rs. 45648.00

60 Add 1% for 3rd Party Charges TOTAL Rs. 45648.00

SUB TOTAL AMOUNT TOTAL Rs. 4884364.00

61 Add 18% GST TOTAL Rs. 879186.00

GRAND TOTAL AMOUNT TOTAL Rs. 5763550.00

62 Add L.S TOTAL Rs. 36450.00

GRAND TOTAL AMOUNT TOTAL Rs. 5800000.00

Section Officer Asst. Executive Engineer

PWD,Sub Division,

DETAILED AND ABSTRACT ESTIMATE

NAME OF WORK:- PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, SITUATED AT APMC PLOT NO. 23(A) GUNJ, KALABURAGI TQ & DIST KALABURAGI

KYDCCBL/2025-26/BD/WORK_INDENT3

SL NO DESCRIPTION NOS L B D QTY UNIT RATE AMOUNT

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth. (PWD Common SR 2023-2024,Vol-1, It No.1.12 Page No. 8)

Basic Rate Rs. 95.00

5% Area Specific Loading Rs. 4.75

Final Rate Rs. 99.75

2 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth.(PWD Common SR 2023-2024,Vol-1, It No.1.4.1 Page No. 5)

EXACAVATION FOR FOOTINGS FOUNDATION 0.15M EXTRA @ BOTH SIDE

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.75 46.40

Basic Rate Rs. 242.00

5% Area Specific Loading Rs. 12.10

Final Rate Rs. 254.10

3 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (PWD Common SR 2023-2024,Vol-1, It No. 1.16.2 Page No. 9) In Hard Rock ( requiring blasting) Depth upto 1.50m

EXACAVATION FOR FOOTINGS FOUNDATION (0.15m EXTRA ON BOTH SIDE) Avg, Depth

Basic Rate Rs. 623.00

5% Area Specific Loading Rs. 31.15

Final Rate Rs. 654.15

4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.(PWD Common SR 2023-2024,Vol-1, It No.2.1.4 Page No. 15)

PCC BED CONCRETE

FOR FOOTING PCC BED (0'-6'' EXTRA ON BOTH SIDE)

PCC FOR INNER PLINTH BEAM

HORIZONTAL WALLS

FLOORING PCC 5.63 B

MEETING HALL 1 3.05 4.50 0.10 1.37

SERVER ROOM 1 2.05 2.45 0.10 0.50

BRANCH MANAGER 1 3.05 2.75 0.10 0.83

STRONG ROOM 1 2.45 3.05 0.10 0.74

WORKING AREA & WAITING HALL 1 8.85 5.50 0.10 4.86

STAIRCASE AREA 1 4.40 1.80 0.10 0.79

PARAPET WALL TOP COOPING 1 45.25 0.23 0.10 1.04

PCC BED CONCRETE

AROUND RSM WALL 1 82.50 0.75 0.15 9.28

Basic Rate Rs. 6217.00

5% Area Specific Loading Rs. 310.85

Final Rate Rs. 6527.85

5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.2.3 Page No. 15)

FOOTING CONCRETE

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (8%) Rs. 506.88

Total Rs. 6842.88

5% Area Specific Loading Rs. 342.14

Final Rate Rs. 7185.02

6 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR 2023-2024,Vol-2, It No.5.1.1 Page No. 9)

RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.60 0.60 29.70

Basic Rate Rs. 5611.00

5% Area Specific Loading Rs. 280.55

Final Rate Rs. 5891.55

7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (70%) 4536.00

Total Rs. 11016.00

5% Area Specific Loading Rs. 550.80

Final Rate Rs. 11566.80

8 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

FOR RCC WALL FOR STRONG ROOM

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (10%) 648.00

Total Rs. 7128.00

5% Area Specific Loading Rs. 356.40

Final Rate Rs. 7484.40

9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD Common SR 2023-2024,Vol-1, It No.1.9 Page No. 7)

EXACAVATION FOR FOOTINGS FOUNDATION

EXCAVATION IN HARD ROCK

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.75 46.40

PCC BED CONCRETE

FOR FOOTING PCC BED (0.15m EXTRA ON BOTH SIDE)

PCC BED CONCRETE

AROUND RSM WALL -1 82.50 0.75 0.15 -9.28

FOOTING CONCRETE

RUBBLE STONE MASONRY

AROUND RSM WALL -1 82.50 0.60 0.60 -29.70

NECK COLUMNS UPTO G.L

Required Filling Total 65.97 Cum 279.30 18425.00

Basic Rate Rs. 266.00

5% Area Specific Loading Rs. 13.30

Final Rate Rs. 279.30

10 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-1, It No.1.8 Page No. 7)

Basic Rate Rs. 474.00

5% Area Specific Loading Rs. 23.70

Final Rate Rs. 497.70

11 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-2, It No.4.1 Page No. 5)

BUILT UP AREA 1 18.20 11.75 213.85

Basic Rate Rs. 118.00

5% Area Specific Loading Rs. 5.90

Final Rate Rs. 123.90

12 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.4.3 Page No. 16)

FOR PLINTH BEAMS

HORIZONTAL WALLS

STAIRCASE AREA 1 & 2

1st FLIGHT & 2nd FLIGHT

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (50%) 3168.00

Total Rs. 9504.00

5% Area Specific Loading Rs. 475.20

Final Rate Rs. 9979.20

13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

COLUMNS PLINTH BEAM TOP TO ROOF BEAM BOTTOM

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (70%) 4790.10

Total Rs. 11633.10

5% Area Specific Loading Rs. 581.66

Final Rate Rs. 12214.76

14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

FOR LINTEL BEAMS

LINTEL BEAM ON 0.23 WALL

PARTITION WALLS

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

STAIRCASE AREA -1 4.40 1.80 0.15 -1.18

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (50%) 3421.50

Total Rs. 10264.50

5% Area Specific Loading Rs. 513.23

Final Rate Rs. 10777.73

17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (45%) 3079.35

Total Rs. 9922.35

5% Area Specific Loading Rs. 496.12

Final Rate Rs. 10418.47

18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Buildings) (PWD Common SR 2023-2024,Vol-1, It No.2.11 (a) Page No. 18)

GROUND FLOOR Concrete kg/Cum

PLINTH BEAMS & STAIRCASE 13.62 90.00 1225.80

RCC WALL STRONG ROOM 9.98 100.00 998.00

Basic Rate Rs. 89457.00

5% Area Specific Loading Rs. 4472.85

Final Rate Rs. 93929.85

19 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.7 Page No. 13)

BASEMENT WALL 1 48.00 0.23 0.60 6.62

STAIRCASE SIDE WALL 2 5.00 0.23 2.15 4.94

STAIRCASE SIDE WALL 2 1.80 0.23 2.15 1.78

PARAPET WALL 1 48.00 0.23 0.90 9.93

RAMP & MAIN ENTRANCE 1 3.00 3.00 0.45 4.05

Basic Rate Rs. 8211.00

5% Area Specific Loading Rs. 410.55

Final Rate Rs. 8621.55

20 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.14 Page No. 14)

PARTITION WALLS

Basic Rate Rs. 1060.00

5% Area Specific Loading Rs. 53.00

Final Rate Rs. 1113.00

21 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD Common SR 2023-2024,Vol-2, It No.12.11 Page No. 99)

Basic Rate Rs. 138074.00

5% Area Specific Loading Rs. 6903.70

Final Rate Rs. 144977.70

22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common SR 2023-2024,Vol-2, It No.11.34(b) Page No. 86)

21.00 Kgs/Sqm 14.53 Sqm

Basic Rate Rs. 183.00

5% Area Specific Loading Rs. 9.15

Final Rate Rs. 192.15

23 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.12.51 Page No. 104)

Basic Rate Rs. 1016.00

5% Area Specific Loading Rs. 50.80

Final Rate Rs. 1066.80

24 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide (PWD Common SR 2023-2024,Vol-2, It No.8.16.3 Page No. 44)

PLASTER MESH 1 450.00 450.00

Basic Rate Rs. 44.00

5% Area Specific Loading Rs. 2.20

Final Rate Rs. 46.20

25 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.10 Page No. 43)

PLASTER TO CEILING

MEETING HALL 1 3.05 4.50 13.72

SERVER ROOM 1 2.05 2.45 5.02

STORE ROOM 1 3.05 2.66 8.11

BRANCH MANAGER 1 3.05 2.75 8.38

STRONG ROOM 1 2.45 3.05 7.47

WORKING AREA & WAITING HALL 1 8.85 5.50 48.67

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 211.00

5% Area Specific Loading Rs. 10.55

Final Rate Rs. 221.55

26 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD Common SR 2023-2024,Vol-2, It No.8.2.1 Page No. 41)

PLASTER TO INTERNAL WALLS

SHORT WALL 2 4.50 3.20 28.80

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.66 3.20 17.02

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.65 3.20 16.96

WORKING & WAITING AREA

SHORT WALL 2 5.50 3.20 35.20

LONG WALL 2 2.30 2.15 9.89

SHORT WALL 2 1.60 2.15 6.88

TOILET LOFT TOP

LONG WALL 2 2.30 0.90 4.14

SHORT WALL 2 1.60 0.90 2.88

SHORT WALL 2 1.80 3.20 11.52

Basic Rate Rs. 295.00

5% Area Specific Loading Rs. 14.75

Final Rate Rs. 309.75

27 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.3.1 Page No. 41)

PLASTER TO EXTERNAL WALLS

SHORT WALL 2 12.25 6.58 161.21

SLAB PROJECTIONS

SHORT WALL 2 12.55 0.15 3.76

Basic Rate Rs. 354.00

5% Area Specific Loading Rs. 17.70

Final Rate Rs. 371.70

28 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (PWD Common SR 2023-2024,Vol-2, It No.9.22.2 Page No. 62) Size of the Tiles 600 x 600mm

VITRIFIED TILES IN ROOMS

MEETING HALL 1 3.05 4.50 13.72

SKIRTING 1 14.35 0.10 1.43

SERVER ROOM 1 2.05 2.45 5.02

SKIRTING 1 8.25 0.10 0.82

STORE ROOM 1 3.05 2.66 8.11

SKIRTING 1 10.67 0.10 1.06

SKIRTING 1 2.75 0.10 0.27

BRANCH MANAGER 1 3.05 2.75 8.38

SKIRTING 1 10.85 0.10 1.08

STRONG ROOM 1 3.05 2.45 7.47

SKIRTING 1 10.25 0.10 1.02

SKIRTING 1 7.17 0.10 0.71

SKIRTING 1 8.25 0.10 0.82

STAIRCASE AREA 1 4.65 1.80 8.37

SKIRTING 1 11.62 0.10 1.16

D/OPENINGS 6 0.90 0.23 1.24

OPENINGS CILL 2 1.45 0.23 0.66

Basic Rate Rs. 1326.00

5% Area Specific Loading Rs. 66.30

Final Rate Rs. 1392.30

29 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD Common SR 2023-2024,Vol-2, It No.9.24 Page No. 63)

GRANITE FLOORING @ LOBBY & PASSAGE AREA

WORKING AREA & WAITING HALL 1 8.15 5.50 44.82

SKIRTING 1 22.65 0.10 2.26

GRANITE FOR STAIRCASE

SKIRTING 2 3.60 0.15 1.08

MAIN ENTRANCE STEPS

TOP LANDING 1 5.75 2.50 14.37

Basic Rate Rs. 2852.00

5% Area Specific Loading Rs. 142.60

Final Rate Rs. 2994.60

30 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.10.2 Page No. 69)

WINDOWS CLADDING

GRANITE FOR STAIRCASE

TREADS 20 0.90 18.00

MAIN ENTRANCE STEPS

TREADS 2 2.00 4.00

Basic Rate Rs. 328.00

5% Area Specific Loading Rs. 16.40

Final Rate Rs. 344.40

31 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (PWD Common SR 2023-2024,Vol-2, It No.9.10 Page No. 60)

CERAMIC TILES IN TOILET

DOOR CILL 1 0.75 0.15 0.11

Basic Rate Rs. 1106.00

5% Area Specific Loading Rs. 55.30

Final Rate Rs. 1161.30

32 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.9.39 Page No. 65)

WALL TILES TO TOILET

LONG WALL 2 2.30 2.10 9.66

SHORT WALL 2 1.60 2.10 6.72

DOOR SIDE 2 0.15 2.10 0.63

Basic Rate Rs. 1449.00

5% Area Specific Loading Rs. 72.45

Final Rate Rs. 1521.45

33 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main ""T"" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ""T"" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ""T"" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ""T"" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ""T"" runners to be suspended from ceiling using GI slotted cleats of size 27 x37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/m2 (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.(PWD Common SR 2023-2024,Vol-2, It No.7.40.2 Page No. 27)

PLASTER TO CEILING

STRONG ROOM 1 2.66 3.05 8.11

MEETING HALL 1 4.50 3.05 13.72

BRANCH MANAGER 1 2.75 3.05 8.38

WORKING AREA & WAITING HALL 1 8.15 5.50 44.82

FRONT PORCH 1 5.75 2.27 13.05

Basic Rate Rs. 1710.00

5% Area Specific Loading Rs. 85.50

Final Rate Rs. 1795.50

34 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD Common SR 2023-2024,Vol-2, It No.12.17 Page No. 100)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 7085.00

5% Area Specific Loading Rs. 354.25

Final Rate Rs. 7439.25

35 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. (PWD Common SR 2023-2024,Vol-2, It No.12.57.2 Page No. 105) do- 30 mm thick one side teak and one side commercial

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 3493.00

5% Area Specific Loading Rs. 174.65

Final Rate Rs. 3667.65

36 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.90 Page No. 110)

Basic Rate Rs. 6734.00

5% Area Specific Loading Rs. 336.70

Final Rate Rs. 7070.70

37 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.85 Page No. 109)

Basic Rate Rs. 5719.00

5% Area Specific Loading Rs. 285.95

Final Rate Rs. 6004.95

38 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD Common SR 2023-2024,Vol-2, It No.11.11.1 Page No. 79)

Z TYPE VENTILATORS

26.00 Kgs/Sqm 5.94 Sqm

Basic Rate Rs. 148.00

5% Area Specific Loading Rs. 7.40

Final Rate Rs. 155.40

39 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) (PWD Common SR 2023-2024,Vol-2, It No.12.93 Page No. 111)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 702.00

5% Area Specific Loading Rs. 35.10

Final Rate Rs. 737.10

40 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/ mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately).(PWD Common SR 2023-2024,Vol-2, It No.12.95 Page No. 112)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 4411.00

5% Area Specific Loading Rs. 220.55

Final Rate Rs. 4631.55

41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD Common SR 2023-2024,Vol-2, It No.8.5.1 Page No. 50)

WALL PUTTY TO INTERNAL WALLS

SHORT WALL 2 4.50 3.20 28.80

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.66 3.20 17.02

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.65 3.20 16.96

WORKING & WAITING AREA

SHORT WALL 2 5.50 3.20 35.20

LONG WALL 2 2.30 2.15 9.89

SHORT WALL 2 1.60 2.15 6.88

TOILET LOFT TOP

LONG WALL 2 2.30 0.90 4.14

SHORT WALL 2 1.60 0.90 2.88

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 2.66 3.05 8.11

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 100.00

5% Area Specific Loading Rs. 5.00

Final Rate Rs. 105.00

42 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.27 Page No. 45)

PRIMER TO INTERNAL WALLS

SHORT WALL 2 4.50 3.20 28.80

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.66 3.20 17.02

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.65 3.20 16.96

WORKING & WAITING AREA

SHORT WALL 2 5.50 3.20 35.20

LONG WALL 2 2.30 2.15 9.89

SHORT WALL 2 1.60 2.15 6.88

TOILET LOFT TOP

LONG WALL 2 2.30 0.90 4.14

SHORT WALL 2 1.60 0.90 2.88

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 2.66 3.05 8.11

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 53.00

5% Area Specific Loading Rs. 2.65

Final Rate Rs. 55.65

43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-char (PWD Common SR 2023-2024,Vol-2, It No.8.39 Page No. 46)

EMULSION PAINT TO INTERNAL WALLS

SHORT WALL 2 4.50 3.20 28.80

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.66 3.20 17.02

SHORT WALL 2 0.90 3.20 5.76

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

SHORT WALL 2 2.65 3.20 16.96

WORKING & WAITING AREA

SHORT WALL 2 5.50 3.20 35.20

LONG WALL 2 2.30 2.15 9.89

SHORT WALL 2 1.60 2.15 6.88

TOILET LOFT TOP

LONG WALL 2 2.30 0.90 4.14

SHORT WALL 2 1.60 0.90 2.88

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 2.66 3.05 8.11

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 127.00

5% Area Specific Loading Rs. 6.35

Final Rate Rs. 133.35

44 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.31 Page No. 46)

PAINT TO EXTERNAL WALLS

SHORT WALL 2 12.25 6.58 161.21

SLAB PROJECTIONS

SHORT WALL 2 12.55 0.15 3.76

Basic Rate Rs. 178.00

5% Area Specific Loading Rs. 8.90

Final Rate Rs. 186.90

45 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common SR 2023-2024,Vol-2, It No.11.28 Page No. 85)

5.00 Kgs/Ft 20.00 Mtr

Basic Rate Rs. 565.00

5% Area Specific Loading Rs. 28.25

Final Rate Rs. 593.25

46 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.41 Page No. 48)

ROLLING SHUTTER 1 1.50 2.15 3.22

Basic Rate Rs. 167.00

5% Area Specific Loading Rs. 8.35

Final Rate Rs. 175.35

47 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.33.2 Page No. 46)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 138.00

5% Area Specific Loading Rs. 6.90

Final Rate Rs. 144.90

48 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete .(PWD Common SR 2023-2024,Vol-2, It No.11.6.1 Page No. 78)

ROLLING SHUTTERS 1 1.70 2.10 3.57

Basic Rate Rs. 2633.00

5% Area Specific Loading Rs. 131.65

Final Rate Rs. 2764.65

49 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..(PWD Common SR 2023-2024,Vol-2, It No.12.60 Page No. 105)

FOR DOORS 7 7.00

Basic Rate Rs. 1052.00

5% Area Specific Loading Rs. 52.60

Final Rate Rs. 1104.60

50 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.61 Page No. 105)

FOR DOORS 7 7.00

Basic Rate Rs. 990.00

5% Area Specific Loading Rs. 49.50

Final Rate Rs. 1039.50

51 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.62 Page No. 105)

FOR DOORS 7 7.00

Total 7.00 Each 248.85 1742.00

Basic Rate Rs. 237.00

5% Area Specific Loading Rs. 11.85

Final Rate Rs. 248.85

52 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.(PWD Common SR 2023-2024,Vol-2, It No.22.9.a Page No. 218)

FOR DOORS 7 7.00

Basic Rate Rs. 1500.00

5% Area Specific Loading Rs. 75.00

Final Rate Rs. 1575.00

53 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.(PWD Common SR 2023-2024,Vol-2, It No.22.15.7 Page No. 219)

FOR DOORS 14 14.00

Basic Rate Rs. 200.00

5% Area Specific Loading Rs. 10.00

Final Rate Rs. 210.00

54 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.65 Page No. 59)

FOR DOORS 7 7.00

Total 7.00 Each 61.95 434.00

Basic Rate Rs. 59.00

5% Area Specific Loading Rs. 2.95

Final Rate Rs. 61.95

55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc.complete.125mm.(PWD Common SR 2023-2024,Vol-2, It No.12.70.2 Page No. 106)

FOR DOORS 28 28.00

Basic Rate Rs. 280.00

5% Area Specific Loading Rs. 14.00

Final Rate Rs. 294.00

56 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD Common SR 2023-2024,Vol-1, It No.15.1 Page No. 149)

STAIRCASE AREA -1 4.40 1.80 -7.92

Basic Rate Rs. 817.00

5% Area Specific Loading Rs. 40.85

Final Rate Rs. 857.85

TOTAL AMOUNT TOTAL Rs. 4517433.00

57 Add 3% For Electrification TOTAL Rs. 135523.00

58 Add 2% For Water Supply & Sanitary Work TOTAL Rs. 90349.00

59 Add 1% For Architectural & Consultant 1% Charges TOTAL Rs. 45174.00

60 Add 1% for 3rd Party Charges TOTAL Rs. 45174.00

SUB TOTAL AMOUNT TOTAL Rs. 4833653.00

61 Add 18% GST TOTAL Rs. 870058.00

GRAND TOTAL AMOUNT TOTAL Rs. 5703711.00

62 Add L.S TOTAL Rs. 46289.00

GRAND TOTAL AMOUNT TOTAL Rs. 5750000.00

Section Officer Asst. Executive Engineer

PWD,Sub Division,

DETAILED AND ABSTRACT ESTIMATE

NAME OF WORK:- PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, SEDAM TOWN SITUATED AT SEDAM. TQ SEDAM & DIST KALABURAGI

KYDCCBL/2025-26/BD/WORK_INDENT4

SL NO DESCRIPTION NOS L B D QTY UNIT RATE AMOUNT

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth. (PWD Common SR 2023-2024,Vol-1, It No.1.12 Page No. 8)

Basic Rate Rs. 95.00

5% Area Specific Loading Rs. 4.75

Final Rate Rs. 99.75

2 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth.(PWD Common SR 2023-2024,Vol-1, It No.1.4.1 Page No. 5)

EXACAVATION FOR FOOTINGS FOUNDATION 0.15M EXTRA @ BOTH SIDE

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.75 46.40

Basic Rate Rs. 242.00

5% Area Specific Loading Rs. 12.10

Final Rate Rs. 254.10

3 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (PWD Common SR 2023-2024,Vol-1, It No. 1.16.2 Page No. 9) In Hard Rock ( requiring blasting) Depth upto 1.50m

EXACAVATION FOR FOOTINGS FOUNDATION (0.15m EXTRA ON BOTH SIDE) Avg, Depth

Basic Rate Rs. 623.00

5% Area Specific Loading Rs. 31.15

Final Rate Rs. 654.15

4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.(PWD Common SR 2023-2024,Vol-1, It No.2.1.4 Page No. 15)

PCC BED CONCRETE

FOR FOOTING PCC BED (0'-6'' EXTRA ON BOTH SIDE)

PCC FOR INNER PLINTH BEAM

HORIZONTAL WALLS

HORIZONTAL WALLS

FLOORING PCC 4.53 B

SERVER ROOM 1 3.05 2.00 0.10 0.61

MEETING HALL 1 5.20 3.05 0.10 1.58

STRONG ROOM 1 2.35 3.05 0.10 0.71

WORKING AREA & WAITING HALL 1 8.45 5.10 0.10 4.30

BRANCH MANAGER 1 4.15 2.75 0.10 1.14

STAIRCASE AREA 1 4.40 1.80 0.10 0.79

PARAPET WALL TOP COOPING 1 53.00 0.23 0.10 1.21

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.15 9.28

Basic Rate Rs. 6217.00

5% Area Specific Loading Rs. 310.85

Final Rate Rs. 6527.85

5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.2.3 Page No. 15)

FOOTING CONCRETE

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (8%) Rs. 506.88

Total Rs. 6842.88

5% Area Specific Loading Rs. 342.14

Final Rate Rs. 7185.02

6 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR 2023-2024,Vol-2, It No.5.1.1 Page No. 9)

RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.60 0.60 29.70

Basic Rate Rs. 5611.00

5% Area Specific Loading Rs. 280.55

Final Rate Rs. 5891.55

7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (70%) 4536.00

Total Rs. 11016.00

5% Area Specific Loading Rs. 550.80

Final Rate Rs. 11566.80

8 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

FOR RCC WALL FOR STRONG ROOM

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (10%) 648.00

Total Rs. 7128.00

5% Area Specific Loading Rs. 356.40

Final Rate Rs. 7484.40

9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD Common SR 2023-2024,Vol-1, It No.1.9 Page No. 7)

EXACAVATION FOR FOOTINGS FOUNDATION

EXCAVATION IN HARD ROCK

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.75 46.40

PCC BED CONCRETE

FOR FOOTING PCC BED (0.15m EXTRA ON BOTH SIDE)

FOR RUBBLE STONE MASONRY

AROUND RSM WALL -1 82.50 0.75 0.15 -9.28

FOOTING CONCRETE

RUBBLE STONE MASONRY

AROUND RSM WALL -1 82.50 0.60 0.60 -29.70

NECK COLUMNS UPTO G.L

Required Filling Total 76.98 Cum 279.30 21501.00

Basic Rate Rs. 266.00

5% Area Specific Loading Rs. 13.30

Final Rate Rs. 279.30

10 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-1, It No.1.8 Page No. 7)

Basic Rate Rs. 474.00

5% Area Specific Loading Rs. 23.70

Final Rate Rs. 497.70

11 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-2, It No.4.1 Page No. 5)

BUILT UP AREA 1 14.30 13.10 187.33

Basic Rate Rs. 118.00

5% Area Specific Loading Rs. 5.90

Final Rate Rs. 123.90

12 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.4.3 Page No. 16)

FOR PLINTH BEAMS

HORIZONTAL WALLS

HORIZONTAL WALLS

STAIRCASE AREA 1 & 2

1st FLIGHT & 2nd FLIGHT

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (50%) 3168.00

Total Rs. 9504.00

5% Area Specific Loading Rs. 475.20

Final Rate Rs. 9979.20

13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

COLUMNS PLINTH BEAM TOP TO ROOF BEAM BOTTOM

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (70%) 4790.10

Total Rs. 11633.10

5% Area Specific Loading Rs. 581.66

Final Rate Rs. 12214.76

14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

FOR LINTEL BEAMS

LINTEL BEAM ON 0.23 WALL

PARTITION WALLS

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

STAIRCASE AREA -1 4.40 1.80 0.15 -1.18

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (50%) 3421.50

Total Rs. 10264.50

5% Area Specific Loading Rs. 513.23

Final Rate Rs. 10777.73

17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (45%) 3079.35

Total Rs. 9922.35

5% Area Specific Loading Rs. 496.12

Final Rate Rs. 10418.47

18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Buildings) (PWD Common SR 2023-2024,Vol-1, It No.2.11 (a) Page No. 18)

GROUND FLOOR Concrete kg/Cum

PLINTH BEAMS & STAIRCASE 12.39 90.00 1115.10

ROOF BEAMS 8.81 140.00 1233.40

RCC WALL STRONG ROOM 8.92 100.00 892.00

Basic Rate Rs. 89457.00

5% Area Specific Loading Rs. 4472.85

Final Rate Rs. 93929.85

19 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.7 Page No. 13)

BASEMENT WALL 1 45.00 0.23 0.60 6.21

STAIRCASE SIDE WALL 2 5.00 0.23 2.15 4.94

STAIRCASE SIDE WALL 2 1.80 0.23 2.15 1.78

PARAPET WALL 1 45.00 0.23 0.90 9.31

RAMP & MAIN ENTRANCE 1 3.00 4.00 0.45 5.40

Basic Rate Rs. 8211.00

5% Area Specific Loading Rs. 410.55

Final Rate Rs. 8621.55

20 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.14 Page No. 14)

PARTITION WALLS

Basic Rate Rs. 1060.00

5% Area Specific Loading Rs. 53.00

Final Rate Rs. 1113.00

21 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD Common SR 2023-2024,Vol-2, It No.12.11 Page No. 99)

Basic Rate Rs. 138074.00

5% Area Specific Loading Rs. 6903.70

Final Rate Rs. 144977.70

22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common SR 2023-2024,Vol-2, It No.11.34(b) Page No. 86)

21.00 Kgs/Sqm 13.09 Sqm

Basic Rate Rs. 183.00

5% Area Specific Loading Rs. 9.15

Final Rate Rs. 192.15

23 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.12.51 Page No. 104)

Basic Rate Rs. 1016.00

5% Area Specific Loading Rs. 50.80

Final Rate Rs. 1066.80

24 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide (PWD Common SR 2023-2024,Vol-2, It No.8.16.3 Page No. 44)

PLASTER MESH 1 390.00 390.00

Basic Rate Rs. 44.00

5% Area Specific Loading Rs. 2.20

Final Rate Rs. 46.20

25 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.10 Page No. 43)

PLASTER TO CEILING

MEETING HALL 1 3.05 5.20 15.86

SERVER ROOM 1 3.05 2.00 6.10

STORE ROOM 1 3.05 2.66 8.11

BRANCH MANAGER 1 4.15 2.75 11.41

STRONG ROOM 1 2.35 3.05 7.16

WORKING AREA & WAITING HALL 1 8.45 5.10 43.09

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 211.00

5% Area Specific Loading Rs. 10.55

Final Rate Rs. 221.55

26 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD Common SR 2023-2024,Vol-2, It No.8.2.1 Page No. 41)

PLASTER TO INTERNAL WALLS

SHORT WALL 2 5.20 3.20 33.28

SHORT WALL 2 2.00 3.20 12.80

SHORT WALL 2 2.35 3.20 15.04

WORKING & WAITING AREA

SHORT WALL 2 8.45 3.20 54.08

SHORT WALL 2 2.75 3.20 17.60

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

LONG WALL 2 1.05 3.20 6.72

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.75 3.20 17.60

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 1.80 3.20 11.52

Basic Rate Rs. 295.00

5% Area Specific Loading Rs. 14.75

Final Rate Rs. 309.75

27 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.3.1 Page No. 41)

PLASTER TO EXTERNAL WALLS

SHORT WALL 2 10.30 6.58 135.54

SLAB PROJECTIONS

SHORT WALL 2 12.55 0.15 3.76

Basic Rate Rs. 354.00

5% Area Specific Loading Rs. 17.70

Final Rate Rs. 371.70

28 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (PWD Common SR 2023-2024,Vol-2, It No.9.22.2 Page No. 62) Size of the Tiles 600 x 600mm

VITRIFIED TILES IN ROOMS

SERVER ROOM 1 3.05 2.00 6.10

SKIRTING 1 9.35 0.10 0.93

MEETING HALL 1 5.20 3.05 15.86

SKIRTING 1 16.06 0.10 1.60

STRONG ROOM 1 3.05 2.35 7.16

SKIRTING 1 10.05 0.10 1.00

BRANCH MANAGER 1 4.15 2.75 11.41

SKIRTING 1 13.05 0.10 1.30

SKIRTING 1 10.67 0.10 1.06

SKIRTING 1 0.75 0.10 0.07

SKIRTING 1 10.85 0.10 1.08

STAIRCASE AREA 1 4.65 1.80 8.37

SKIRTING 1 11.62 0.10 1.16

D/OPENINGS 5 0.90 0.23 1.03

OPENINGS CILL 2 1.45 0.23 0.66

Basic Rate Rs. 1326.00

5% Area Specific Loading Rs. 66.30

Final Rate Rs. 1392.30

29 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD Common SR 2023-2024,Vol-2, It No.9.24 Page No. 63)

GRANITE FLOORING @ LOBBY & PASSAGE AREA

WORKING AREA & WAITING HALL 1 8.45 5.10 43.09

SKIRTING 1 25.75 0.10 2.57

GRANITE FOR STAIRCASE

SKIRTING 2 3.60 0.15 1.08

MAIN ENTRANCE STEPS

TOP LANDING 1 4.00 2.00 8.00

Basic Rate Rs. 2852.00

5% Area Specific Loading Rs. 142.60

Final Rate Rs. 2994.60

30 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.10.2 Page No. 69)

WINDOWS CLADDING

GRANITE FOR STAIRCASE

TREADS 20 0.90 18.00

MAIN ENTRANCE STEPS

TREADS 2 2.00 4.00

Basic Rate Rs. 328.00

5% Area Specific Loading Rs. 16.40

Final Rate Rs. 344.40

31 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (PWD Common SR 2023-2024,Vol-2, It No.9.10 Page No. 60)

CERAMIC TILES IN TOILET

DOOR CILL 1 0.75 0.15 0.11

Basic Rate Rs. 1106.00

5% Area Specific Loading Rs. 55.30

Final Rate Rs. 1161.30

32 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.9.39 Page No. 65)

WALL TILES TO TOILET

LONG WALL 2 2.05 2.10 8.61

SHORT WALL 2 1.05 2.10 4.41

DOOR SIDE 2 0.15 2.10 0.63

Basic Rate Rs. 1449.00

5% Area Specific Loading Rs. 72.45

Final Rate Rs. 1521.45

33 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main ""T"" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ""T"" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ""T"" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ""T"" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ""T"" runners to be suspended from ceiling using GI slotted cleats of size 27 x37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/m2 (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.(PWD Common SR 2023-2024,Vol-2, It No.7.40.2 Page No. 27)

PLASTER TO CEILING

STRONG ROOM 1 2.35 3.05 7.16

MEETING HALL 1 5.20 3.05 15.86

BRANCH MANAGER 1 4.15 2.75 11.41

WORKING AREA & WAITING HALL 1 8.45 5.10 43.09

WORKING AREA & WAITING HALL 1 5.20 1.45 7.54

FRONT PORCH 1 4.00 3.00 12.00

Basic Rate Rs. 1710.00

5% Area Specific Loading Rs. 85.50

Final Rate Rs. 1795.50

34 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD Common SR 2023-2024,Vol-2, It No.12.17 Page No. 100)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 7085.00

5% Area Specific Loading Rs. 354.25

Final Rate Rs. 7439.25

35 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. (PWD Common SR 2023-2024,Vol-2, It No.12.57.2 Page No. 105) do- 30 mm thick one side teak and one side commercial

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 3493.00

5% Area Specific Loading Rs. 174.65

Final Rate Rs. 3667.65

36 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.90 Page No. 110)

Basic Rate Rs. 6734.00

5% Area Specific Loading Rs. 336.70

Final Rate Rs. 7070.70

37 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.85 Page No. 109)

Basic Rate Rs. 5719.00

5% Area Specific Loading Rs. 285.95

Final Rate Rs. 6004.95

38 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD Common SR 2023-2024,Vol-2, It No.11.11.1 Page No. 79)

Z TYPE VENTILATORS

26.00 Kgs/Sqm 5.40 Sqm

Basic Rate Rs. 148.00

5% Area Specific Loading Rs. 7.40

Final Rate Rs. 155.40

39 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) (PWD Common SR 2023-2024,Vol-2, It No.12.93 Page No. 111)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 702.00

5% Area Specific Loading Rs. 35.10

Final Rate Rs. 737.10

40 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/ mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately).(PWD Common SR 2023-2024,Vol-2, It No.12.95 Page No. 112)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 4411.00

5% Area Specific Loading Rs. 220.55

Final Rate Rs. 4631.55

41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD Common SR 2023-2024,Vol-2, It No.8.5.1 Page No. 50)

WALL PUTTY TO INTERNAL WALLS

SHORT WALL 2 5.20 3.20 33.28

SHORT WALL 2 2.00 3.20 12.80

SHORT WALL 2 2.35 3.20 15.04

WORKING & WAITING AREA

SHORT WALL 2 8.45 3.20 54.08

SHORT WALL 2 2.75 3.20 17.60

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

LONG WALL 2 1.05 3.20 6.72

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.75 3.20 17.60

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 3.05 2.00 6.10

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 100.00

5% Area Specific Loading Rs. 5.00

Final Rate Rs. 105.00

42 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.27 Page No. 45)

PRIMER TO INTERNAL WALLS

SHORT WALL 2 5.20 3.20 33.28

SHORT WALL 2 2.00 3.20 12.80

SHORT WALL 2 2.35 3.20 15.04

WORKING & WAITING AREA

SHORT WALL 2 8.45 3.20 54.08

SHORT WALL 2 2.75 3.20 17.60

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

LONG WALL 2 1.05 3.20 6.72

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.75 3.20 17.60

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 3.05 2.00 6.10

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 53.00

5% Area Specific Loading Rs. 2.65

Final Rate Rs. 55.65

43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-char (PWD Common SR 2023-2024,Vol-2, It No.8.39 Page No. 46)

EMULSION PAINT TO INTERNAL WALLS

SHORT WALL 2 5.20 3.20 33.28

SHORT WALL 2 2.00 3.20 12.80

SHORT WALL 2 2.35 3.20 15.04

WORKING & WAITING AREA

SHORT WALL 2 8.45 3.20 54.08

SHORT WALL 2 2.75 3.20 17.60

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

LONG WALL 2 1.05 3.20 6.72

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.75 3.20 17.60

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 1.80 3.20 11.52

STORE ROOM 1 3.05 2.00 6.10

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 127.00

5% Area Specific Loading Rs. 6.35

Final Rate Rs. 133.35

44 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.31 Page No. 46)

PAINT TO EXTERNAL WALLS

SHORT WALL 2 10.30 6.58 135.54

SLAB PROJECTIONS

SHORT WALL 2 12.55 0.15 3.76

Basic Rate Rs. 178.00

5% Area Specific Loading Rs. 8.90

Final Rate Rs. 186.90

45 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common SR 2023-2024,Vol-2, It No.11.28 Page No. 85)

5.00 Kgs/Ft 20.00 Mtr

Basic Rate Rs. 565.00

5% Area Specific Loading Rs. 28.25

Final Rate Rs. 593.25

46 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.41 Page No. 48)

ROLLING SHUTTER 1 1.50 2.15 3.22

Basic Rate Rs. 167.00

5% Area Specific Loading Rs. 8.35

Final Rate Rs. 175.35

47 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.33.2 Page No. 46)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 138.00

5% Area Specific Loading Rs. 6.90

Final Rate Rs. 144.90

48 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete .(PWD Common SR 2023-2024,Vol-2, It No.11.6.1 Page No. 78)

ROLLING SHUTTERS 1 1.70 2.10 3.57

Basic Rate Rs. 2633.00

5% Area Specific Loading Rs. 131.65

Final Rate Rs. 2764.65

49 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..(PWD Common SR 2023-2024,Vol-2, It No.12.60 Page No. 105)

FOR DOORS 5 5.00

Basic Rate Rs. 1052.00

5% Area Specific Loading Rs. 52.60

Final Rate Rs. 1104.60

50 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.61 Page No. 105)

FOR DOORS 5 5.00

Basic Rate Rs. 990.00

5% Area Specific Loading Rs. 49.50

Final Rate Rs. 1039.50

51 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.62 Page No. 105)

FOR DOORS 5 5.00

Total 5.00 Each 248.85 1244.00

Basic Rate Rs. 237.00

5% Area Specific Loading Rs. 11.85

Final Rate Rs. 248.85

52 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.(PWD Common SR 2023-2024,Vol-2, It No.22.9.a Page No. 218)

FOR DOORS 5 5.00

Basic Rate Rs. 1500.00

5% Area Specific Loading Rs. 75.00

Final Rate Rs. 1575.00

53 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.(PWD Common SR 2023-2024,Vol-2, It No.22.15.7 Page No. 219)

FOR DOORS 10 10.00

Basic Rate Rs. 200.00

5% Area Specific Loading Rs. 10.00

Final Rate Rs. 210.00

54 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.65 Page No. 59)

FOR DOORS 5 5.00

Total 5.00 Each 61.95 310.00

Basic Rate Rs. 59.00

5% Area Specific Loading Rs. 2.95

Final Rate Rs. 61.95

55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc.complete.125mm.(PWD Common SR 2023-2024,Vol-2, It No.12.70.2 Page No. 106)

FOR DOORS 20 20.00

Basic Rate Rs. 280.00

5% Area Specific Loading Rs. 14.00

Final Rate Rs. 294.00

56 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD Common SR 2023-2024,Vol-1, It No.15.1 Page No. 149)

STAIRCASE AREA -1 4.40 1.80 -7.92

Basic Rate Rs. 817.00

5% Area Specific Loading Rs. 40.85

Final Rate Rs. 857.85

TOTAL AMOUNT TOTAL Rs. 4686396.00

57 Add 3% For Electrification TOTAL Rs. 140592.00

58 Add 2% For Water Supply & Sanitary Work TOTAL Rs. 93728.00

59 Add 1% For Architectural & Consultant 1% Charges TOTAL Rs. 46864.00

60 Add 1% for 3rd Party Charges TOTAL Rs. 46864.00

SUB TOTAL AMOUNT TOTAL Rs. 5014444.00

61 Add 18% GST TOTAL Rs. 902600.00

GRAND TOTAL AMOUNT TOTAL Rs. 5917044.00

62 Add L.S TOTAL Rs. 22956.00

GRAND TOTAL AMOUNT TOTAL Rs. 5940000.00

Section Officer Asst. Executive Engineer

PWD,Sub Division,

DETAILED AND ABSTRACT ESTIMATE

NAME OF WORK:- PROPOSED CONSTRUCTION OF GROUND FLOOR BUILDING FOR DCC BANK LTD, CHITTAPUR TOWN SITUATED AT CHITTAPUR. TQ CHITTAPUR & DIST KALABURAGI

KYDCCBL/2025-26/BD/WORK_INDENT5

SL NO DESCRIPTION NOS L B D QTY UNIT RATE AMOUNT

1 Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth. (PWD Common SR 2023-2024,Vol-1, It No.1.12 Page No. 8)

Basic Rate Rs. 95.00

5% Area Specific Loading Rs. 4.75

Final Rate Rs. 99.75

2 Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/ Soft rock & depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work In Ordinary/Soft rock upto 300 mm depth.(PWD Common SR 2023-2024,Vol-1, It No.1.4.1 Page No. 5)

EXACAVATION FOR FOOTINGS FOUNDATION 0.15M EXTRA @ BOTH SIDE

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.75 46.40

Basic Rate Rs. 242.00

5% Area Specific Loading Rs. 12.10

Final Rate Rs. 254.10

3 Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work. (PWD Common SR 2023-2024,Vol-1, It No. 1.16.2 Page No. 9) In Hard Rock ( requiring blasting) Depth upto 1.50m

EXACAVATION FOR FOOTINGS FOUNDATION (0.15m EXTRA ON BOTH SIDE) Avg, Depth

Basic Rate Rs. 623.00

5% Area Specific Loading Rs. 31.15

Final Rate Rs. 654.15

4 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.(PWD Common SR 2023-2024,Vol-1, It No.2.1.4 Page No. 15)

PCC BED CONCRETE

FOR FOOTING PCC BED (0'-6'' EXTRA ON BOTH SIDE)

PCC FOR INNER PLINTH BEAM

HORIZONTAL WALLS

FLOORING PCC 4.46 B

WORKING AREA 1 3.27 6.62 0.10 2.16

WAITING AREA 1 5.40 4.40 0.10 2.37

BRANCH MANAGER 1 3.10 2.75 0.10 0.85

STRONG ROOM 1 3.10 2.45 0.10 0.75

SERVER ROOM 1 2.05 2.20 0.10 0.45

MEETING HALL 1 3.10 4.35 0.10 1.34

PARAPET WALL TOP COOPING 1 53.00 0.23 0.10 1.21

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.15 9.28

Basic Rate Rs. 6217.00

5% Area Specific Loading Rs. 310.85

Final Rate Rs. 6527.85

5 Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.2.3 Page No. 15)

FOOTING CONCRETE

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (8%) Rs. 506.88

Total Rs. 6842.88

5% Area Specific Loading Rs. 342.14

Final Rate Rs. 7185.02

6 Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD Common SR 2023-2024,Vol-2, It No.5.1.1 Page No. 9)

RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.60 0.60 29.70

Basic Rate Rs. 5611.00

5% Area Specific Loading Rs. 280.55

Final Rate Rs. 5891.55

7 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (70%) 4536.00

Total Rs. 11016.00 5

5% Area Specific Loading Rs. 550.80

Final Rate Rs. 11566.80

8 Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (PWD Common SR 2023-2024,Vol-1, It No.2.3.2 Page No. 16)

FOR RCC WALL FOR STRONG ROOM

Basic Rate Rs. 6480.00

Centring & Shuttering Charges (10%) 648.00

Total Rs. 7128.00

5% Area Specific Loading Rs. 356.40

Final Rate Rs. 7484.40

9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. (PWD Common SR 2023-2024,Vol-1, It No.1.9 Page No. 7)

EXACAVATION FOR FOOTINGS FOUNDATION

EXCAVATION IN HARD ROCK

FOR RUBBLE STONE MASONRY

AROUND RSM WALL 1 82.50 0.75 0.15 9.28

PCC BED CONCRETE

FOR FOOTING PCC BED (0.15m EXTRA ON BOTH SIDE)

FOR RUBBLE STONE MASONRY

AROUND RSM WALL -1 82.50 0.75 0.15 -9.28

FOOTING CONCRETE

RUBBLE STONE MASONRY

AROUND RSM WALL -1 82.50 0.60 0.60 -29.70

NECK COLUMNS UPTO G.L

Required Filling Total 39.86 Cum 279.30 11133.00

Basic Rate Rs. 266.00

5% Area Specific Loading Rs. 13.30

Final Rate Rs. 279.30

10 Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour, rolling, water, all materials, usage& all other appurtenaces required to complete the work. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-1, It No.1.8 Page No. 7)

Basic Rate Rs. 474.00

5% Area Specific Loading Rs. 23.70

Final Rate Rs. 497.70

11 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. As per the direction of Engineer Incharge. (PWD Common SR 2023-2024,Vol-2, It No.4.1 Page No. 5)

BUILT UP AREA 1 29.65 19.25 570.76

Basic Rate Rs. 118.00

5% Area Specific Loading Rs. 5.90

Final Rate Rs. 123.90

12 Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.4.3 Page No. 16)

FOR PLINTH BEAMS

HORIZONTAL WALLS

STAIRCASE AREA 1 & 2

1st FLIGHT & 2nd FLIGHT

Basic Rate Rs. 6336.00

Centring & Shuttering Charges (50%) 3168.00

Total Rs. 9504.00

5% Area Specific Loading Rs. 475.20

Final Rate Rs. 9979.20

13 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

COLUMNS PLINTH BEAM TOP TO ROOF BEAM BOTTOM

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (70%) 4790.10

Total Rs. 11633.10

5% Area Specific Loading Rs. 581.66

Final Rate Rs. 12214.76

14 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

FOR LINTEL BEAMS

LINTEL BEAM ON 0.23 WALL

PARTITION WALLS

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

15 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (60%) 4105.80

Total Rs. 10948.80

5% Area Specific Loading Rs. 547.44

Final Rate Rs. 11496.24

16 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

STAIRCASE AREA -1 4.40 1.80 0.15 -1.18

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (50%) 3421.50

Total Rs. 10264.50

5% Area Specific Loading Rs. 513.23

Final Rate Rs. 10777.73

17 Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. (PWD Common SR 2023-2024,Vol-1, It No.2.5.2 Page No. 16)

Basic Rate Rs. 6843.00

Centring & Shuttering Charges (45%) 3079.35

Total Rs. 9922.35

5% Area Specific Loading Rs. 496.12

Final Rate Rs. 10418.47

18 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. (Buildings) (PWD Common SR 2023-2024,Vol-1, It No.2.11 (a) Page No. 18)

GROUND FLOOR Concrete kg/Cum

PLINTH BEAMS & STAIRCASE 12.25 90.00 1102.50

ROOF BEAMS 9.04 140.00 1265.60

RCC WALL STRONG ROOM 8.92 100.00 892.00

Basic Rate Rs. 89457.00

5% Area Specific Loading Rs. 4472.85

Final Rate Rs. 93929.85

19 Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.7 Page No. 13)

BASEMENT WALL 1 45.00 0.23 0.60 6.21

STAIRCASE SIDE WALL 2 5.00 0.23 2.15 4.94

STAIRCASE SIDE WALL 2 1.80 0.23 2.15 1.78

PARAPET WALL 1 45.00 0.23 0.90 9.31

RAMP & MAIN ENTRANCE 1 3.00 2.00 0.45 2.70

Basic Rate Rs. 8211.00

5% Area Specific Loading Rs. 410.55

Final Rate Rs. 8621.55

20 Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. (PWD Common SR 2023-2024,Vol-2, It No.6.14 Page No. 14)

PARTITION WALLS

Basic Rate Rs. 1060.00

5% Area Specific Loading Rs. 53.00

Final Rate Rs. 1113.00

21 Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. (PWD Common SR 2023-2024,Vol-2, It No.12.11 Page No. 99)

Basic Rate Rs. 138074.00

5% Area Specific Loading Rs. 6903.70

Final Rate Rs. 144977.70

22 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. (PWD Common SR 2023-2024,Vol-2, It No.11.34(b) Page No. 86)

21.00 Kgs/Sqm 11.65 Sqm

Basic Rate Rs. 183.00

5% Area Specific Loading Rs. 9.15

Final Rate Rs. 192.15

23 Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.12.51 Page No. 104)

Basic Rate Rs. 1016.00

5% Area Specific Loading Rs. 50.80

Final Rate Rs. 1066.80

24 Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications. ( length of mesh only be measured for payment Plaster mesh 100mm wide (PWD Common SR 2023-2024,Vol-2, It No.8.16.3 Page No. 44)

PLASTER MESH 1 400.00 400.00

Basic Rate Rs. 44.00

5% Area Specific Loading Rs. 2.20

Final Rate Rs. 46.20

25 Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.10 Page No. 43)

PLASTER TO CEILING

WORKING AREA 1 3.27 6.62 21.64

WAITING AREA 1 5.40 4.40 23.76

BRANCH MANAGER 1 3.10 2.75 8.52

STRONG ROOM 1 3.10 2.45 7.59

SERVER ROOM 1 2.05 2.20 4.51

MEETING HALL 1 3.10 4.35 13.48

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 211.00

5% Area Specific Loading Rs. 10.55

Final Rate Rs. 221.55

26 Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.. (PWD Common SR 2023-2024,Vol-2, It No.8.2.1 Page No. 41)

PLASTER TO INTERNAL WALLS

WORKING & WAITING AREA

SHORT WALL 2 6.60 3.20 42.24

SHORT WALL 2 2.80 3.20 17.92

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

SHORT WALL 2 2.20 3.20 14.08

SHORT WALL 2 4.35 3.20 27.84

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 2.05 3.20 13.12

SHORT WALL 2 2.00 3.20 12.80

Basic Rate Rs. 295.00

5% Area Specific Loading Rs. 14.75

Final Rate Rs. 309.75

27 Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.3.1 Page No. 41)

PLASTER TO EXTERNAL WALLS

SHORT WALL 2 9.15 6.58 120.41

SLAB PROJECTIONS

SHORT WALL 2 9.15 0.15 2.74

Basic Rate Rs. 354.00

5% Area Specific Loading Rs. 17.70

Final Rate Rs. 371.70

28 Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (PWD Common SR 2023-2024,Vol-2, It No.9.22.2 Page No. 62) Size of the Tiles 600 x 600mm

VITRIFIED TILES IN ROOMS

SKIRTING 1 11.05 0.10 1.10

BRANCH MANAGER 1 3.10 2.75 8.52

SKIRTING 1 11.00 0.10 1.10

STRONG ROOM 1 3.10 1.05 3.25

SKIRTING 1 7.55 0.10 0.75

SERVER ROOM 1 2.05 2.20 4.51

SKIRTING 1 7.75 0.10 0.77

MEETING HALL 1 3.10 4.35 13.48

SKIRTING 1 14.15 0.10 1.41

SKIRTING 1 7.55 0.10 0.75

STAIRCASE AREA 1 3.10 2.00 6.20

SKIRTING 1 9.66 0.10 0.96

D/OPENINGS 5 0.90 0.23 1.03

Basic Rate Rs. 1326.00

5% Area Specific Loading Rs. 66.30

Final Rate Rs. 1392.30

29 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cat Eye, River Pink or equivalent. (PWD Common SR 2023-2024,Vol-2, It No.9.24 Page No. 63)

GRANITE FLOORING @ LOBBY & PASSAGE AREA

WORKING AREA 1 3.27 6.62 21.64

WAITING HALL 1 5.40 4.40 23.76

SKIRTING 1 26.30 0.10 2.63

GRANITE FOR STAIRCASE

SKIRTING 2 3.60 0.15 1.08

MAIN ENTRANCE STEPS

TOP LANDING 1 2.40 1.80 4.32

Basic Rate Rs. 2852.00

5% Area Specific Loading Rs. 142.60

Final Rate Rs. 2994.60

30 Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.10.2 Page No. 69)

WINDOWS CLADDING

GRANITE FOR STAIRCASE

TREADS 20 0.90 18.00

MAIN ENTRANCE STEPS

TREADS 2 2.00 4.00

Basic Rate Rs. 328.00

5% Area Specific Loading Rs. 16.40

Final Rate Rs. 344.40

31 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2 including pointing in white cement mixed with pigment of matching shade complete. (PWD Common SR 2023-2024,Vol-2, It No.9.10 Page No. 60)

CERAMIC TILES IN TOILET

DOOR CILL 1 0.75 0.15 0.11

Basic Rate Rs. 1106.00

5% Area Specific Loading Rs. 55.30

Final Rate Rs. 1161.30

32 Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications (PWD Common SR 2023-2024,Vol-2, It No.9.39 Page No. 65)

WALL TILES TO TOILET

LONG WALL 2 2.05 2.10 8.61

SHORT WALL 2 1.05 2.10 4.41

DOOR SIDE 2 0.15 2.10 0.63

Basic Rate Rs. 1449.00

5% Area Specific Loading Rs. 72.45

Final Rate Rs. 1521.45

33 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 g/m2, both side inclusive) consisting of main ""T"" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross ""T"" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main ""T"" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross ""T"" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main ""T"" runners to be suspended from ceiling using GI slotted cleats of size 27 x37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/m2 (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.(PWD Common SR 2023-2024,Vol-2, It No.7.40.2 Page No. 27)

PLASTER TO CEILING

STRONG ROOM 1 3.10 2.45 7.59

MEETING HALL 1 3.10 4.35 13.48

BRANCH MANAGER 1 3.10 2.75 8.52

WORKING AREA & WAITING HALL 1 3.27 6.62 21.64

WORKING AREA & WAITING HALL 1 5.40 4.40 23.76

FRONT PORCH 1 2.40 1.77 4.24

Basic Rate Rs. 1710.00

5% Area Specific Loading Rs. 85.50

Final Rate Rs. 1795.50

34 Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, usage charges complete as per specifications. (excluding cost of fixtures) (PWD Common SR 2023-2024,Vol-2, It No.12.17 Page No. 100)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 7085.00

5% Area Specific Loading Rs. 354.25

Final Rate Rs. 7439.25

35 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. (PWD Common SR 2023-2024,Vol-2, It No.12.57.2 Page No. 105) do- 30 mm thick one side teak and one side commercial

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 3493.00

5% Area Specific Loading Rs. 174.65

Final Rate Rs. 3667.65

36 Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size – 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.90 Page No. 110)

Basic Rate Rs. 6734.00

5% Area Specific Loading Rs. 336.70

Final Rate Rs. 7070.70

37 Providing & fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) (PWD Common SR 2023-2024,Vol-2, It No.12.85 Page No. 109)

Basic Rate Rs. 5719.00

5% Area Specific Loading Rs. 285.95

Final Rate Rs. 6004.95

38 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD Common SR 2023-2024,Vol-2, It No.11.11.1 Page No. 79)

Z TYPE VENTILATORS

26.00 Kgs/Sqm 4.86 Sqm

Basic Rate Rs. 148.00

5% Area Specific Loading Rs. 7.40

Final Rate Rs. 155.40

39 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) (PWD Common SR 2023-2024,Vol-2, It No.12.93 Page No. 111)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 702.00

5% Area Specific Loading Rs. 35.10

Final Rate Rs. 737.10

40 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer Numeric Control) routed of approved design by Engineer-incharge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/ mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S framework required with priming coat shall be paid separately).(PWD Common SR 2023-2024,Vol-2, It No.12.95 Page No. 112)

WPC DOOR FRAME FOR TOILET

Basic Rate Rs. 4411.00

5% Area Specific Loading Rs. 220.55

Final Rate Rs. 4631.55

41 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. (PWD Common SR 2023-2024,Vol-2, It No.8.5.1 Page No. 50)

WALL PUTTY TO INTERNAL WALLS

WORKING & WAITING AREA

SHORT WALL 2 6.60 3.20 42.24

SHORT WALL 2 2.80 3.20 17.92

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

SHORT WALL 2 2.20 3.20 14.08

SHORT WALL 2 4.35 3.20 27.84

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 2.05 3.20 13.12

SHORT WALL 2 2.00 3.20 12.80

STORE ROOM 1 3.05 2.00 6.10

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 100.00

5% Area Specific Loading Rs. 5.00

Final Rate Rs. 105.00

42 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.27 Page No. 45)

PRIMER TO INTERNAL WALLS

WORKING & WAITING AREA

SHORT WALL 2 6.60 3.20 42.24

SHORT WALL 2 2.80 3.20 17.92

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

SHORT WALL 2 2.20 3.20 14.08

SHORT WALL 2 4.35 3.20 27.84

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 2.05 3.20 13.12

SHORT WALL 2 2.00 3.20 12.80

STORE ROOM 1 3.05 2.00 6.10

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 53.00

5% Area Specific Loading Rs. 2.65

Final Rate Rs. 55.65

43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-char (PWD Common SR 2023-2024,Vol-2, It No.8.39 Page No. 46)

EMULSION PAINT TO INTERNAL WALLS

WORKING & WAITING AREA

SHORT WALL 2 6.60 3.20 42.24

SHORT WALL 2 2.80 3.20 17.92

SHORT WALL 2 2.75 3.20 17.60

SHORT WALL 2 2.45 3.20 15.68

LONG WALL 2 2.05 2.15 8.81

SHORT WALL 2 1.05 2.15 4.51

SHORT WALL 2 2.20 3.20 14.08

SHORT WALL 2 4.35 3.20 27.84

TOILET LOFT TOP

LONG WALL 2 2.05 0.90 3.69

SHORT WALL 2 1.05 0.90 1.89

SHORT WALL 2 2.05 3.20 13.12

SHORT WALL 2 2.00 3.20 12.80

STORE ROOM 1 3.05 2.00 6.10

STAIRCASE AREA 1 4.40 1.80 7.92

WAIST SLAB 2 6.70 0.90 12.06

Basic Rate Rs. 127.00

5% Area Specific Loading Rs. 6.35

Final Rate Rs. 133.35

44 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt & pick up resistant, Alkali & Water resistant of required shade: New work (Two coats applied @ 1.43 L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (PWD Common SR 2023-2024,Vol-2, It No.8.31 Page No. 46)

PAINT TO EXTERNAL WALLS

SHORT WALL 2 9.15 6.58 120.41

SLAB PROJECTIONS

SHORT WALL 2 9.15 0.15 2.74

Basic Rate Rs. 178.00

5% Area Specific Loading Rs. 8.90

Final Rate Rs. 186.90

45 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(PWD Common SR 2023-2024,Vol-2, It No.11.28 Page No. 85)

5.00 Kgs/Ft 20.00 Mtr

Basic Rate Rs. 565.00

5% Area Specific Loading Rs. 28.25

Final Rate Rs. 593.25

46 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.41 Page No. 48)

ROLLING SHUTTER 1 1.50 2.15 3.22

Basic Rate Rs. 167.00

5% Area Specific Loading Rs. 8.35

Final Rate Rs. 175.35

47 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.75 L/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.(PWD Common SR 2023-2024,Vol-2, It No.8.33.2 Page No. 46)

DOOR SHUTTER FOR ROOMS

Basic Rate Rs. 138.00

5% Area Specific Loading Rs. 6.90

Final Rate Rs. 144.90

48 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete,including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete .(PWD Common SR 2023-2024,Vol-2, It No.11.6.1 Page No. 78)

ROLLING SHUTTERS 1 1.70 2.10 3.57

Basic Rate Rs. 2633.00

5% Area Specific Loading Rs. 131.65

Final Rate Rs. 2764.65

49 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete..(PWD Common SR 2023-2024,Vol-2, It No.12.60 Page No. 105)

FOR DOORS 6 6.00

Basic Rate Rs. 1052.00

5% Area Specific Loading Rs. 52.60

Final Rate Rs. 1104.60

50 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.61 Page No. 105)

FOR DOORS 6 6.00

Basic Rate Rs. 990.00

5% Area Specific Loading Rs. 49.50

Final Rate Rs. 1039.50

51 Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.62 Page No. 105)

FOR DOORS 6 6.00

Total 6.00 Each 248.85 1493.00

Basic Rate Rs. 237.00

5% Area Specific Loading Rs. 11.85

Final Rate Rs. 248.85

52 Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-incharge.(PWD Common SR 2023-2024,Vol-2, It No.22.9.a Page No. 218)

FOR DOORS 6 6.00

Basic Rate Rs. 1500.00

5% Area Specific Loading Rs. 75.00

Final Rate Rs. 1575.00

53 Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Tower Bolts 250x10mm.(PWD Common SR 2023-2024,Vol-2, It No.22.15.7 Page No. 219)

FOR DOORS 12 12.00

Basic Rate Rs. 200.00

5% Area Specific Loading Rs. 10.00

Final Rate Rs. 210.00

54 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.(PWD Common SR 2023-2024,Vol-2, It No.12.65 Page No. 59)

FOR DOORS 6 6.00

Total 6.00 Each 61.95 372.00

Basic Rate Rs. 59.00

5% Area Specific Loading Rs. 2.95

Final Rate Rs. 61.95

55 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc.complete.125mm.(PWD Common SR 2023-2024,Vol-2, It No.12.70.2 Page No. 106)

FOR DOORS 24 24.00

Basic Rate Rs. 280.00

5% Area Specific Loading Rs. 14.00

Final Rate Rs. 294.00

56 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. (PWD Common SR 2023-2024,Vol-1, It No.15.1 Page No. 149)

STAIRCASE AREA -1 4.40 1.80 -7.92

Basic Rate Rs. 817.00

5% Area Specific Loading Rs. 40.85

Final Rate Rs. 857.85

TOTAL AMOUNT TOTAL Rs. 4328604.00

59 Add 3% For Electrification Rs. 129858.00

59 Add 2% For Water Supply & Sanitary Work TOTAL Rs. 86572.00

59 Add 1% For Architectural & Consultant 1% Charges TOTAL Rs. 43286.00

60 Add 1% for 3rd Party Charges TOTAL Rs. 43286.00

SUB TOTAL AMOUNT TOTAL Rs. 4631606.00

59 Add 18% GST TOTAL Rs. 833689.00

GRAND TOTAL AMOUNT TOTAL Rs. 5465295.00

59 Add L.S TOTAL Rs. 34705.00

GRAND TOTAL AMOUNT TOTAL Rs. 5500000.00

Section Officer Asst. Executive Engineer

PWD,Sub Division,