(Item 1) Electrification work and other services of Kota Chaupati at CHS Kunhari Kota

Amount

Supply, installation, testing and commissioning of 11/0.433 KV, 160 KVA Package Distribution Sub Station Oil type Copper Wound 160 KVA Distribution Transfomers, HV/LV switchgears amd enclosers including all accessories & fittings to form a complete package conforming to technical specification and scheduled of GTP as per latest JVVNL specifications. The PSS included foundation/ Civil work as per manufacture/ Discom specifications. The features and construction details of 11/0.433 KV packaged distribution substation shall be in accordance with the requirements stated here in under : 11 kV RMU unit (SF6/VCB type) 3 Way Type - 1 Nos. LT Air Circuit Breaker, 250 Amps. - 1 Nos. LT Moulded Case Circuit Braker, 125 Amps for outgoing feeders. - 3 Nos. Enclosure with Canopy/double roof for entire substation. - 1 Nos. Necessary disconnection devices, all necessary cables for installation connection between RMU, Transformer and LT Switchgear. Suitable size double compressions glands and lugs etc. Fire Extinguisher. - 2 Nos.

Note :- Contractor has to submit drawing as per Technical Specification and GTP prior to inspection and got approved same from RE (Elect.), RHB, Jaipur.

SITC Of Following Items from sr.no. 2 to 27

Pelican Lighting Pole - 3.7 Meter Pelican Lighting Pole Ht.3660

Viper Lighting Pole Ht.4270

Euro Lighting Pole - 3.66 Meter Euro Lighting Pole Ht.3660

Cross Lighting Pole - 3.66 Meter Cross Lighting Pole Ht.3660

Ring Fort Arc Micro [Dimension : Ø300 x 612mm] integrated with 24W LED WW,CW,NW

Sport King Lighting Pole - 9.5 Meter Sport King Lighting Pole Ht.9500

Aston 4 [Dimension : 342 x 135 x 365mm] integrated with 4 x 60W LED WW,CW,NW

Two Way Connector (IP67)

In-Ground Luminaire - Adjustable [Dimension : Ø173 x 128mm] suitable for 9W LED Asymmetrical WW,CW,NW

Two Way Connector (IP67)

In-Ground Luminaire [Dimension : Ø58 x 122mm] suitable for 3W LED Asymmetrical WW,CW,NW

Sudo - Asy Frame [C.O.D : 242 x 71 x 83mm] integrated with 12W LED WW,CW,NW

Wall Cylin Mini [Dimension : 145 x 100 x 260mm] integrated with 2 x 6W LED

Wall Cylin Mini [Dimension : 145 x 100 x 166mm] integrated with 6W LED WW,CW,NW

LED Underwater Luminaire - Fountain Light [Dimension : Ø149 x 62mm] integrated with 9 x 2W LED RGB

Two Way Connector (IP67)

LED Underwater Luminaire - Surface Mounting [Dimension : 167 x 32mm] integrated with 6 x 2W LED WW

Two Way Connector (IP67)

LED Underwater Luminaire - Surface Mounting Spot Light [Dimension : 103 x 70 x 134mm] integrated with 1 x 3W LED WW

Two Way Connector (IP67)

Wall Dena [Dimension : 111 x 108 x 94mm] integrated with 6W LED WW,CW,NW

Focus Midi - Half Frame [Dimension : Ø271 x 71mm] integrated with 12W LED

Cylin [Dimension : Ø110 x 120mm] integrated with 15W LED WW,CW,NW

Amaze Mini [Dimension : 199 x 129 x 228mm] integrated with 30W LED WW,CW,NW

KL 4200 ASTON PRIME (DIMENSION:(342X135X180 MM) INTIGRATED WITH1X60W LED (WW)

KL 4046 RECTRA-HALF FRAME(DIMENSION:(185X84X280) INTIGRATED WITH 12W LED (WL1)

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.

4 core 185.0 Sq.mm

4 core 70.0 Sq.mm

4 core 50.0 Sq.mm

Security works

SITC of 1/3'' CCD CAMERA (Ceiling or Wall Mounted) with night visionof sony chip having resolution of 400 mpx with 21IR LED capture/electronic eye/advert. 10 mtr range

Supply, installation and commissioning of Remote compact keyboard, variable speed, Joystick Control, for DVR.

Supply, installation and commissioning of 16-Channel Video, 1-Ch audio Embedded DVR, Each DVR with 400ips display and 400 ips recording, 1TB HDD built, CDRW, PAL, capable of 8 Internal HDD's.

Supply, Installation and commissioning of 21" Color Monitor

Suppy, Installation, testing, commisioning, training, and maintance of WALK THROUGH DOOR FRAME METAL DECTACTOR. As per sspecifications.

Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessorry tools for punching, stripping, crimpping and testing required.

Public address system

Full range surface mount loudspeaker with frequency response of 80Hz to 17kHz; power handling of 40W; Nominal dispersion of 125H X 125V; Sensitivity of 87 db SPL and Max SPL of 103 db SPL; Transformer tapping can be done. Brackets included. Bose Ds40SE

Frequency Response (+/-3 dB) 45 – 180 Hz Frequency Range (-10 dB) 37 – 270 Hz Nominal Dispersion Omnidirectional below 200 Hz Sensitivity (SPL / 1 W @ 1 m) 90 dB Maximum SPL @ 1 m 117 db (123 db peak) Long-Term Power Handling 500 W (2000 W peak) Nominal Impedance 8 ohms : Bose AMU 210

2x4 Signal Processor with 2 analog balanced differential input; 4 analog balanced differential output with programable custom pages like seminar / presentations / cultutal events / conferences etc as per site requirements ; custom channel routing; crossovers, limiters, gain control; band pass filters; delays; limiters; gain and signal polarity. Bose SP 24

Power Amplifier Maximum Rated Power: 2 x 1000 W (THD+N < 0.04%, 1 kHz, 4-8 Ω , 70/100V) Bose Powershare 21000

Professional Media Player ( Gemini CDMP 1500)

10Channel Analog Mixer ( Yamaha MG10 )

Speaker Cable ( Krystal 1.5Sqmm )

Connectors ( Krystal )

Kitchen ventilation system

SITC of factory assembled double skin central evaporative cooling plant having specifications as per A, B, C, D, E, F and following items with sr. no, as per specifications and quantity of each item.

A. Air washer section comprising 50 mm thick pre air filter made out from washable synthetic fiber with 90 % down to 10 microns makes : Thermodin / Spectrum / Puromatic / AAF

B. Humidification section comprising of Wet pads 200 mm thick impregnated cellulose paper media ( Celdec pads ) of imported origin with 2 bend PVC eliminator, Celdec pads make : Muntor / Hutech / Ecocool

C. Fan Section comprising of belt driven, forward curved double inlet AMCA certified centrifugal fan suitable for required cfm at 50 mm static pressure, Fan make: Nicotra / Krugger / Comefri

D. TEFC motor as required with pulley, belt motor make: ABB / Crompton / Bharat bijlee / Siemens

E. The unit shall be fabricated with frame work hollow extruded aluminum profile with 0.80 mm pre-plasticized GSS on outside and 0.80 mm plain GSS on inside complete with 25 mm thick CFC free PUF insulation of minimum 38 kg/cum density sandwiched in between inner and outer skins, SS -304 ( 18 g ) Sump tank, 'B" class GI piping, make up, drain & quick fill and drain connection, Butterfly/Gate valves for pumps, make up, drain & quick fill and drain connections of sump, 2 no. Pumps of suitable capacity strainers and necessary fittings, stand, anti-vibration pads etc.as required.

F. Starter panel suitable for operation of Blower motor, pump made out of 1.6 mm thick sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps, MCB etc. complete in all respect.

10000 CFM, 2 Nos.,

6000 CFM, 2Nos.,

SITC of ducting made from GSS of class VIII & fabricated as per IS:655 and as per approved drawings & designs including the cost of hangers, supports, angle, expansion fasteners, closed cell neoprene gasket T&P etc. as required of following gauge:

0.63mm (24 G), 640sqm

0.80mm (22 G), 390sqm

Supply and fixing of Double louvered extruded aluminum supply air grills with dampers. Front louvers fixed & rear louvers movable. ( 6.2 Sqm)

Supply and fixing of external thermal closed cell nitrile rubber insulation sheet on duct including cost of adhesive complete as per specification and as required

9mm thick, 850Sqm

Supply and fixing duct insulation with 50 mm thick thermacol sheet of density 24 kg/cu.m after applying two coats of cold setting adhesive (CPRX Compound) and binding sheet with chicken wire mesh and applying cement mortar plaster as required. 96 Sqm

AIR SCRUBBER

Supplying, installing, testing and commissioning of DOUBLE SKIN CONSTRUCTION SCRUBBER UNIT for kitchen exhaust, (Static pressure shall be 60 mm WG or need to be confirmed as per ducting by HVAC vendor before installation). The unit shall comprise of Air intake section with box type metallic pre filters, fan section with DIDW imported centrifugal fan , drive set with V belt , motor , double bank spray nozzle arrangement complete with stainless steel (SS 304) 18 g sump, water circulation pumps , along with G.I./CPVC inter connecting piping, fittings, 4 bend PVC eliminators. Complete in all respect.

12000 CFM, 2 Nos.

7000 CFM, 2 Nos.

PANELS FOR AIR SCRUBBER

Design, manufacture, supply, installation, testing & commissioning of the following cubicle type weather proof(IP-67), dead front, sheet steel, wall/floor mounted control panels, including anchoring into the wall, wiring terminating from bottom into MCB & earthing, in each panel shall be provided by the electrical contractor.

All wiring & copper earthing of motors from panel shall be included.

The panel shall be include the following components & accessories.

MCB as per the ratings given bellow, suitable for motor duty and able to withstand fault level of 20KA.

DOL / SD starter as per HP rating

Terminal block for power distribution as required.

Contactor, overload relay with built in single phasing protection (only for DOL & S/D starter)

Phase indicating lights & indicating light for 'ON' status.

Time delay relay for delayed automatic restart of motor.

Wiring for micro switch for stopping the fan at the time of fire

For on / off / remote and local operation, 3 pole single phase throw switch shall be provided in each unit panel to facilitate override of the automatic operation

All panels should be BMS compatible, data to be transferred through suitable port

Remote start & stop facilities to be provided for each panel

Supply, installation, testing and balancing of rectangular Volume Control Damper made of 18 G GI casing 120 mm wide and 20 G GI sheet blade, 100 mm wide, chrome plated spindles, self-lubricating bushes blade linkage fully enclosed, handle operation with status indicator suitable for rectangular ducting connection. 6.7 Sqm

Supply, installation and testing of powder coated extruded aluminum Wall Louvers having frames and fixed blades with wire mesh screen of aluminum/ Galvanized steel, mesh size 20 x 20 mm, Flanges drilled/ riveted as standard, with proper neoprene gasket, The weather resistant louver shall be 40 mm deep. Louvers to be mounted on Brick/ Block/Concrete Wall, all arrangements required for fixing, including cutting, drilling, fixing, Water Proofing etc. to be considered in the quote. 3.2 Sqm

SITC OF LED VIDEO WALL 18 Sqm (6m X 3m)

LED DISPLAY WALL

LED DISPLAY Size 5.76 meter ( W) x 2.88 meter (H) or bigger

Pixel pitch 10mm mm or less

Pixel Configuration Commercial grade 3-in-1 SMD

Lamp Board Thickness 2mm Thickness Alu- Board

Lamp Board Module IP68

Lamp Board Rating Fireproof & Anti-Corrosion

Cabinet Area 0.92 square meter

Resolution 96 x 96 pixels per cabinet(HxV)

Pixel Density 10000 / Sq meter or better

Drive Method 1/8 Scan

Processing 16 Bit

Contrast Ratio ≥4000:1

Brightness ≥6500 NITS

Brightness uniformity 97%

LED Display Cabinet Weight 23 Kg/ Cabinet

Power Consumption/ Sq Meter 750 Watts

Average power Consumption/ Sq. Meter 120 watts

Refresh Rate 3840Hz or better

Maintainance Front/Rear

Colors Temperature 3000 – 10000 K, adjustable

Hor. viewing angle 160° or better

Vert. viewing angle 120° or better

Operation power voltage 100-240V / 50-60Hz

Operational temperature range -40 to +60

Operational humidity 10-95% RH

Lifetime 1,00,000 hrs

Drive Mode Common Cathode Constant Current Drive

Cabinet IP rating (F/R) IP65/65

Certifications/ Regulatory BIS, CE, RoHS, TUV, UL, AS/NZS CISPR22

Approved Make Barco, Delta & Planar

Display Controller

LED Controller 1920 x 1080 @60Hz

Input 1 x Dvi, 1 X HDMI and Loop HDMI

Maximum loading capacity 2.3 Million pixel

Maximum Input Resolution 1920 x 1200

Maximum Width 4096 Pixels

Maximum Height 2560 Pixels

Output 4 Gigabit Ethernet output

USB Dual USB 2.0 for high speed configuration and easy cascading

HDCP Support HDCp 1.3

Transmission Distance CAT5≤140M; CAT6 170M; optical Fiber ; No limitation

Periphirals Multifunctional Card, Optical fiber transceivers, gigabit switcher

Size 1U Standard Box

Input Voltage 100-240 V AC

Rated Power Consumption 20watts

weight 2 Kg

The bidder should provide complete content managment software for video wall Multi Regions/Zones Content Support: Supports playback of most media formats Content SchedulingText Scroll / Image Scroll Preview,Smart Download etc as required, with 3 year Annual maintanace of video wall including 3 year operation and maintence of video wall as per terms and condition of Rajasthan Housing Board.

Make - Barco/Delta/Planner(Leyard)/Xtreme

Bidder Name

Amount

Raj Electricals(GSTN-08AGBPS1419A1ZV)