TN13186 Supply of thermocouples for unit 1 to 7 at Kstps, kota

TSE THERMOCOUPLE FOR HP STOP VALVE

T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for Stm. & water System temp. (SH Spray) For Stage-II El/IL:- 200/800 mm

Thermocouple Insert L=465 mm for HP Outer Casing

Thermocouple for Flue gas Temp,IL / EL = 1200 / 400 mm

Thermocouple DRB200 (L= 6000 mm for Bearing Temperature )

K-TYPE THERMOCOUPLE FOR FLUE GAS MM/ EXT LENGTH - 150MM/1250MM

Thermocouple for HP Casing (TSE)

TSE Thermocouple for HP Control Valve

Thermocouple Type -A L=6000 mm for HP/IP TOP/BOTTOM Casing

Thermocouple Type -A,(L=465 mm) for HP Outer Casing

Thermocouple Type -B,(L=375 mm) for Loop pipe after IPCV

Thermocouple TYPE -B L = 515 mm For HP Outer casing inlet section

Mill fire protection thermocouple with thermowell for Unit 5,6 &7,IL-127MM

THERMOCOUPLE FOR MILL BEARING DE & NDE FOR UNIT#5

Thermocouple INSERT L = 375 mm For LOOP PIPE AFTER IPCV

Thermocouple INSERT L = 515 mm For HP OUTER CASING INLET SECTION

"CAPILLARY TYPE CR/AL "K" T/C, FOR METAL TEMP. SHEATH LENGTH :-16000MM(16MTR)"

"CAPILLARY TYPE CR/AL "K" T/C, FOR METAL TEMP. SHEATH LENGTH :-20000MM(20MTR)"

IP Inner Casing Thermocouple for U#5,6&7.

K- TYPE THERMOCOUPLE FOR FLUE GAS CROMAL-ALUMEL IMM/ EXT LENGTH 100/400MM

K"- Type thermocouple for flue Gas, Immersion Length- 1000 mm Ext. Length -150 mm/1000 mm

CAPILLARY TYPE CR/AL "K" T/C, FOR METAL TEMP. SHEATH LENGTH: 25000MM(25MTR)

CAPILLARY TYPE CR/AL "K" TYPE THERMOCOUPLE FOR METAL TEMPERATURE, SHEATH LENGTH: 12000MM(12MTR)

K-Type (Cromel-Alumel) FOR Main steam temp. at SH-14 outlet (L&R), Immersion Ext. Length 200 / 200 mm

T/C Assembly type ‘J’ (Fe- Cu Ni) (Screwed Connection Type) for Classifier O/L Temp. of U#6&7 EL/IL:-160/400

T/C K-Type (Cr/AL) Duplex, with Flanged Connections: for Secondary Air System of U#5,6&7.El/IL:- 300/800 mm

T/C K-Type (Cr/AL) Duplex, with Flanged Connections: for by pass temp. and PA temp of Mills of U#5,6&7.El/IL:- 160/400

T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for Stm. temp. Before and After Desuperheater of U#5,6&7.El/IL:- 6000/200 mm

T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for CRH Stm. temp. of U#5,6&7. El/IL:- 160/160 mm

T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for HRH Stm. temp. of U#5,6&7.El/IL:- 200/300 mm

T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for Main Stm. temp. at SH-14 O/L (L) &(R) of U#5,6&7.El/IL:- 200/200 mm

T/C K-Type (Cr/AL) Duplex, with Screwed Connections (High Pressure) for Stm. & water System temp. (SH Spray) of U#5,6&7.El/IL:- 100/100 mm

Techno Instruments

Micro Process Controls

Technisys Engineering Pvt Ltd

Techno Instruments

Tempsens Instruments (I) Pvt Ltd

Micro Process Controls