Repairing and Renovation in ITI Building at Mora Hazira, Dist: Surat (Door & Window, Pigeon Repairing, Drainage, Sanitary, Clearing, roofing sheet, Road Work and etc) Safety Net, Toilet Plaster,campus other Misc. works

Repairing and Renovation in ITI Building at Mora Hazira, Dist: Surat (Door & Window, Pigeon Safety

Net,Toilet Repairing,Drainage, Sanitary, Plaster,campus Clearing,roofing sheet ,Road Work and other

Misc. works etc)

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Providing and fixing Stainless Steel Bird Safety Net, Pigeon 445.00 Sqmt 1797.80

Safety Net 304 Grade Stainless Steel wire of ISI guage

designation of Mesh Size 30- 30 mm ,Thickness 1-2mm with

Water Proof and Alluminium Frame 63.50 mm x 38.10 mm x

1.95 mm thick (1.094 wt/kg Rmt). including Mesh Size 30-

mm beading including all necessary SS 304 Grade fixture

and fastening etc. as directed by Engineer in charge.

2 Providing and fixing in position 300 mm high, 150 mm wide 50.00 No 909.00

English/Gujrati letters made from 1.0 mm thick stainless

steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

3 Removing and scraping of old deteriorated plaster of any 100.00 Sqmt 20.55

thickness fromm wall / R.C.C member including stacking of

serviceable material and disposal of unserviceable from site

of work with all lead and lift

4 20 mm Thick sand faced Gutka cement plaster on walls for 20.00 Sqmt 347.42

all height above ground level consisting of 12 mm Thick

backing coat of c.m. 1:3 (1 cement : 3 sand) and 8 mm Thick

finishing coat of c.m. 1:1 (1 cement : 1 sand) with 1x1cm

Groves at juction of structure member etc. complete.all

5 Providing 15mm thick cement plaster in single coat on 10.00 Sqmt 249.39

Rough (Similar) side of single or birck walls / concrete wall

for interior plastering and finished even and smooth in C M

1:4 (1 cement : 4 coarse sand) with floting coat of neat

cement slurry etc. comp. For Ground floor

6 Providing 15mm thick cement plaster in single coat on 30.00 Sqmt 273.95

Rough (Similar) side of single or birck walls / concrete wall

for interior plastering and finished even and smooth in C M

1:4 (1 cement : 4 coarse sand) with floting coat of neat

cement slurry etc. comp. For First floor

7 Providing 10 mm. Thick cement plaster in single coat for 10.00 Sqmt 209.82

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

with floting coat of neat cement slurry etc. comp. For

8 Providing 10 mm. Thick cement plaster in single coat for 30.00 Sqmt 234.38

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:4 (1 cement : 4 sand)

with floting coat of neat cement slurry etc. comp. For First

9 Dismentaling tiled of stone floors laid in mortar including 101.00 Sqmt 50.11

stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.

10 Dismantling santtary fittings like wash basin, W.C. pan Indian 4.00 No 425.93

and European type, flushing tank etc. including stacking the

materials with all lead and lift.

11 Dismentling C.I. pipes G.S.W.pipes and A.C. rain water pipes 130.00 Rmt 78.51

with fittings and clamps including stacking the materials

with all lead and lift ( for any dia, of pipe)

Item Description of Item Quantity Unit Rate In Amount

12 P & L matt Finished Ceramic tiles 6 mm thick in skirting 58.00 Sqmt 1037.25

risers of steps and dedo on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush

pointing in white cement etc. complete. Colour and Shade

approved by Engineer-In-Charge

{Kajaria,Somany,Nitco,Asian or equivalent }

13 Providing and laying coloured glazed tiles of the size 300 mm 28.00 Sqmt 1513.28

x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting,

risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white cement

14 Providing laying and jointing in true line and level 15mm dia. 50.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

15 Providing laying and jointing in true line and level 25mm dia. 50.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

16 Providing laying and jointing in true line and level 40mm dia. 10.00 Rmt 148.12

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall

be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

17 Providing, laying and jointing in true line and level 110 10.00 Rmt 878.57

diametre U.P.V.C (Type B) conforming to IS 13592-1992 with

one end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x

145 mm heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost of

18 Providing, laying and jointing in true line and level 75 mm 10.00 Rmt 739.32

dia. UPVC SWRType B pipe conforming to IS 13592-1992

with one end plain and other end socketed with rubbering

and fitting conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp at every 2000 mm c/c or shall be conceled in

walss as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all materials.

Item Description of Item Quantity Unit Rate In Amount

19 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 10.00 No 599.64

100 mm diameter with jali of the following nominal diameter

of self cleansing design with C.I scread down or hinged

grating including the cost of cutting and making good the

20 Providing and fixing screw down bib taps of following 20.00 No 186.83

size.(A) Brass screw down bib tap polished bright. (i) 15mm

21 Providing and fixing pillar tap, capstan head, screw down 10.00 No 308.73

high pressure with screws, shanks and back nuts. (i) 15mm

22 Providing and fixing brass screw down stop tap.(A) 15mm 2.00 No 205.83

23 Providing and fixing brass screw down stop tap.(C) 25mm 2.00 No 220.82

24 Providing and fixing 600mm x 450mm bevelled edge mirrror 2.00 No 859.41

of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

25 Providing and fixing C.P. brass towel rail comlete with C.P. 2.00 No 616.42

brass brackets fixed to wooden plugs with C.P. brass scews

(B) 600mm x 20mm size.

26 Providing and fixing toilet paper holder.(A) C.P. Brass 2.00 No 427.99

27 Providing and fixing wash down water closet dual flushing 2.00 No 4590.45

system type (European type W C pan) with integral P and S

trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing and

fixing plastic seat cover for wash down WC with CP brass

hinges and rubber buffers back plastic seat and including

providing and fixing PVC flushing tank with a pair of C I or

MS bracket with complete fitting such as lead valve siphon

15 mm dia brass ball valve with polythene float CP brass

handle unions and couplings for connection with inlet out let

and over flow pipes 40 mm dia porcelain enameled flush

bend including cutting holes in walls and making good the

same connection the flush bend with cistern and closet

vitreous china.

28 Providing and fixing washbasin with single hole for pillar tap 2.00 No 1533.32

with C.I. or M.S. brackets painted white including sutting

holes and making good the same but excluding fittings.(A)

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm

size. (i) In white colour.

29 Providing and fixing C.P. brass waste for washbasin or sink. 2.00 No 67.91

30 Providing and fixing M.I. fisher union for washbasin or sink. 2.00 No 78.75

31 Providing and fixing M.S. round holding down or Foundation 32.00 Kg 55.60

bolts with nuts and washer plates complete

32 Providing and laying cement concrete 1:2:4 (1- Cement : 2- 24.30 Cmt 3741.69

Coarse sand : 4- graded stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

Foundation and Plinth

33 Excavation for foundation upto 1.50 mt depth including 16.20 Cmt 123.13

sorting out and stacking of useful materials and disposing

the excavated stuff upto 50 mt lead (A) Loose or soft soil

Item Description of Item Quantity Unit Rate In Amount

34 Removing, Repairing and Refixing Old existing wooden door 14.00 No 2406.83

shutter including repairing the shutter/frame using Randha

machine and replacing old fixture and fastening with new

SS 304 grade fixtures like 3 Hinges, 1 Stoppers, 1 Aldrop ,

Handle & 1 lock etc. and as directed by engineer in charge

35 Providing and Fixing 6 mm thick Lexan Polycarbonate multi 106.00 Sqmt 1441.90

wall roofing sheet fixed with hilti screw and rubber silicon

sealer and alluminium strip of size 50 x 3 mm etc complete

as directed by Engineer in charge.

36 Steel work, welded in built up sections framed work 1581.00 Kg 91.08

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

37 Removing dry or oil bound distemper by a washing and 396.00 Smt 13.54

scraping and sand papering the ceiling surface smooth

including necessary repairs to scratches complete. And Extra

over for Removing dry oil bound Distemper on cellings and

38 Removing dry or oil bound distemper by a washing and 466.00 Sqmt 11.87

scraping and sand papering the ceiling surface smooth

including necessary repairs to scratches complete.

39 Applying two coats of putty & two coats of primer of 917.00 Sqmt 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

40 Wall painting (two coats) with plastic emulsion paint of 452.00 Sqmt 84.80

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth and Extra over item 57 for

painting with plastic emulsion paint of approved brand on

ceilings and sloping roofs.

41 Wall painting (two coats) with plastic emulsion paint of 466.00 Sqmt 83.36

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth

42 Finishing wall with weather proof exterior emulsion paint on 150.00 Sqmt 120.26

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete

43 Providing & erecting water cooler having storage capacity 1.00 No 55893.40

150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient

temp of 45˚ C. The outlet temp. of the water should drop by

15˚C within a hour, The water cooler should be comprising of

hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats,

relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from Stainless Steel

Item Description of Item Quantity Unit Rate In Amount

44 Supplying & erecting reverse osmosis (RO) water 1.00 No 175895.54

purification system with M.S. powder coated pedestal frame,

prefilter housing carbon filter suitable buster DC pump, auto

low & high pressure switches with following size of LPH

capacity & erected as directed [F] 500 LPH with 3 phase Raw

water pump of 1000LPH @ 3.0 kg/cm2 (1No - Kirloskar /CRI

/Lubi), Dual media filter 13"x54" - (1No), Micron catridge

filter 20" x 4.0"-1No, High pressure pump 1000LPH @

11kg/cm2 - (1No - lubi/Shimge/ CRI), RO Membrane housing

with RO membrane of 40*40 - (2 Nos), RO pressure tube 4" x

2E -(1No), 0-2400 LPH Rotameter ( 2Nos), , Dosing pump 0 -

6 LPH - (1 No),. with 100 Ltr Dosing tank - (1 No), with

Recovery Rate 50%.

45 providing and erecting Mains with 1.1 KV grade FRLS PVC 20.00 Mtr 95.95

insulated ISImarked stranded Copper conductor wire in

following type of pipe to beerected in / on wall / ceiling with

2.5 sq. mm copper conductor FRL SPVC insulated stranded

wire of green colour for earth continuity of

following size ((C) with oval conduit /PVC casing capping

double lock type (a) 2 wire 4 sq. mm

46 Providing & erecting 240 V MCB double pole switch for 1.00 No 299.97

motor & inductive load (C Curve) having 10 KA breaking

capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat.III

47 Providing & erecting 415 V MCB Four Pole for Motor & 2.00 No 668.62

Inductive Load (C Curve) having 10KA breaking capacity &

confirms to IS :8828 in existing box having following capacity

(b)40 Amp. Cat.III

48 Providing and erecting Sheet Steel powder coated MCB 1.00 No 629.23

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (b) sheet steel

double door (IP-43) (i)4 way

49 (B) three phase incoming and single phase horizontal type 1.00 No 2339.16

outgoing Per phase isolation type (PPI) (b) sheet steel

double door (i)4 way

50 providing and erecting Approved make RCCBs conforming to 3.00 No 2235.13

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not

incorporate any electronic component. for following Max.

rating erected as directed. (ii) 40Amps. DP Cat. III

51 Supplying & erecting approved make SMC press moulded 1.00 No 515.10

composite FRP. loop-in, loop-out approx. 2mm thick box

complete with Bakelite connector strip 5way(3P+N+E),DIN

rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (B) 250mm x

200mm x 100mm [deep]

Item Description of Item Quantity Unit Rate In Amount

52 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured 25.00 Mtr 126.25

cable multistrand / Solid Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench /

pipe of following size of cables (B) 4 core 6 Sq. mm

53 Supplying and erecting LED indoor fittings with LEDs of 163.00 Nos 373.70

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet

54 Providing and erecting Approved make Ceiling fan with 27.00 Nos 1596.81

double ball bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on existing

hook or clamp with earthing. [Make shall be approved by

Engineer in charge]

55 Providing following type of Modular Type Accessories 67.00 Nos 151.50

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as per

site situation directed by Engineer In charge. (1)One No. SP

56 (2) One No 5 pin plug Cat.III 27.00 Nos 151.50

57 (5) Electronic hum Free steps EME Fan regulator Cat.III 77.00 Nos 398.95

58 (9) 16 Amp. SP one way switch Cat.III 37.00 Nos 180.79

59 (10) 6/16Amp. Universal socket Cat.III 37.00 Nos 199.98

60 Conveyance charges for Ceiling fan, Table fan, Exhaust fan, 47.00 Nos 26.26

Pedestal fan, Bracket fan and cabin fan etc.(from store to

worksite OR site to workshop or back for repairing)

61 Removing the installed Ceiling fan / Exhaust Fan for 47.00 Nos 43.43

servicing / repairing from ceiling and reinstalling the same

after making in working condition

62 Servicing the uninstalled ceiling fan with washing & 47.00 Nos 34.34

throughing blades, canopies, making dry , checking all nut-

bolts, replacing quarter pin & oiling /greasing and testing

63 Rewinding of Any fan by using supper enamelled copper 41.00 Nos 401.98

wire and over hauling and putting in working order with

original speed with guarantee for one year including credit

of D.M. retained by Agency

64 Replacing the bearing/ bushing of Ceiling fan and putting the 19.00 Nos 103.02

fan in working order including credit of D.M. retained by

Agency. (a) Bearing

65 (b) Bushing 19.00 Nos 43.43

66 Replacing condenser for ceiling fan/ Exhaust Fan / Pedestal 86.00 Nos 64.64

Fan / Table Fan / Cabin Fan {Credit of D.M. retained by

Item Description of Item Quantity Unit Rate In Amount

67 Providing and erecting Inverter based approved make split 1.00 Nos 51666.55

airconditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed

rotary compressor with accessories etc. duly connected

separately erected evaporating unit and blower motor with

its accessories by means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable for ( cost includes

Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting. (1)For

ISEER Range (KWH/KWH)(3.1 to 3.99) (C) for 1.7 to 2 ton

68 Supplying and erecting insulated pair of soft copper tubing 6.00 Rmt 965.56

open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and words) of

the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

4 as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

5 GST will be paid Extra as per Govt. amendment

Dy. Executive Engineer Executive Engineer

SVR (R&B) Sub-Division Surat (R&B) Division No.1