RE-DEVELOPMENT WORK OF SHANALA GARDEN IN MORBI MUNICIPAL CORPORATION AREA AT MORBI.(2ND ATTEMPT)

NAME OF WORK :- RE-DEVELOPMENT WORK OF SHANALA GARDEN IN MORBI MUNICIPAL CORPORATION

RECAPITULATION SHEET

Sr No. Description Amount

1 CLEARING,DISMENTALING & TRAFFIC MANAGEMENT ₹

5 BOUNDRY FENCING ₹

6 URBAN FURNITURE ₹

7 TREES & PLANTATION ₹

8 ELECTRICAL WORK ₹

MORBI MUNICIPAL CORPORATION

NAME OF WORK :- RE-DEVELOPMENT WORK OF SHANALA GARDEN IN MORBI MUNICIPAL CORPORATION AREA AT MORBI.

Sr No. Description Unit Quantity Rate Amount

CLEARING,DISMENTALING & TRAFFIC

Clearing and grubbing road land including uprooting

rank vegetation grass bushes,shrubs,sapling and

trees girth up to 300 mm removal of stumps of trees

cut earlier and disposal of unserviceable materials

(C) By mechanical means in area of light jungle

Demolition including stacking of serviceable

2 materilas anddisposal of unserviceable materials Cum. 30.00 ₹ 1,071.63 ₹

with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead and

lift.(ii) In Cement Mortar.

Supplying Plastic Traffic cone 750 mm height with

Reflected tap and RMC name or logo and with

4 rubber baseincluding 3.00 mt length plastic chain Nos. 100.00 ₹ 569.00 ₹

Providing and Supplying of sefaty Barrigate Tape

250.00 mt. length

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff \

upto 50 Meter lead.(A) Loose or soft soil

Rolling and consolidation using vibratory road roller

8 - 10 tonne capacity (incl. watering)(A) Earth work

(layer not exceeding 200mm thickness)

Construction of granular sub-base by providing close

graded material, mixing in a mechanical mix plant at

OMC, spreading in uniform layers with motor grader

8 on prepared surface and compacting with vibratory CuM 50.00 ₹ 1,184.00 ₹

power roller to achieve the desired density

complete (Grade-II)

Supplying, laying and fixing non-woven

polypropylene geotextile fabric of minimum

150–200 GSM beneath red soil/murum pathway

over prepared GSB surface, including surface

9 cleaning, proper overlapping (minimum 300 mm at SqM 250.00 ₹ 75.00 ₹

joints), anchoring with U-pins/staples, trimming,

protection during subsequent layer placement and

complete as per specifications and engineer’s

Providing and laying Red Soil + Lime stabilised

flooring for pedestrian pathway, comprising

approved red soil free from organic matter, mixed

with hydrated lime @ 5–7% by weight, laid over

10 prepared base, including thorough mixing of CuM 25.00 ₹ 2,650.00 ₹

materials, spreading, levelling and finishing the

surface true to line, level and required slope,

complete as directed by Engineer-in-Charge

Supplying and applying eco-friendly organic soil

stabilizer / natural polymer binder (lignin-based /

enzyme-based / plant-derived), non-toxic, non-

cementitious and water soluble, conforming to

ASTM D4609 / IRC SP-89 guidelines, compatible with

red soil / murum, applied by dilution in potable

11 water and mixed uniformly with top 75–100 mm soil SqM 250.00 ₹ 300.00 ₹

layer, improving CBR, cohesion and erosion

resistance, reducing dust and surface ravelling,

executed as per manufacturer’s specifications

including curing, complete as directed by Engineer-

Providing and laying brick kerbing along walkway

edges using first class burnt clay bricks (230×110×75

mm) laid to required line, level and curvature in

12 cement mortar 1:3, including jointing, necessary Rmt 170.00 ₹ 400.00 ₹

cutting, alignment, ramming, curing and finishing

complete as directed by Engineer-in-Charge

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(B) Dense or Hard soil

Rolling work with Roller 8-10 Ton capacity over

metalling murrum for soling or single layer arriving

14 proper compaction (with watering) Sqm. 54.00 ₹ 9.00 ₹

Spreading the stone aggregate for rolling and

W.B.M. including filling the interstices to required

15 camber and gradient (excluding spreading of Cum. 9.00 ₹ 259.64 ₹

Blindage)(iii) 25mm to 50mm size crushed stone

Spreading blindage or road crust filling the gaps in

16 metal and leveling to camber and gradient as Cum. 6.00 ₹ 153.31 ₹

directed.(ii) Sand

Providing and laying cement concrete 1:3:6 (1-

Cement : 3 coarse sand : 6- hand broken stone

17 aggregates 40 mmnominal size) and curing Cum. 6.00 ₹ 3,064.60 ₹

complete excluding cost of formwork in (A)

Foundation and Plinth

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

18 in foundation and plinth in Cement Mortar 1:5. (1- Cum. 31.00 ₹ 4,203.06 ₹

Cement : 5 -fine sand)(B) Conventional

20mm thick Sand Face Cement Plaster Work in

which 1 paster in proportion of 1:3 and 2nd plaster

inteh proportion of 1:2 using Cement:Mortar with

19 spong finishing etc. complete (Note: Before SqM. 135.00 ₹ 263.00 ₹

carringout Plaster work on RCC, required tipping

work should be carried out as instructed)

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing and laying polished kota stone slab 25mm

thick in risers of steps,skirting Dedo and pillars laid

on 10mm thick cement mortar 1:3 (1 Cement :

21 coarse sand) and jointed with gray cement slury Sqm. 45.00 ₹ 1,132.82 ₹

mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete.

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

22 not exceeding 20 cm. in depth consolidating each Cum. 4.00 ₹ 135.56 ₹

disposited layer by ramming and watering.

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff \

upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(C) Hard Murrum

CC work 1:3:6 using aggregate of size 10-20 mm,

curing, finishing etc. complete (without

25 reinforcement) Cum. 1.00 ₹ 4,866.00 ₹

CC work M-25 for RCC footing using aggregate of

size 10-20 mm, centring, curing, finishing etc.

26 complete (without reinforcement) Cum. 2.00 ₹ 5,620.00 ₹

CC work M-25 for Column using aggregate of size

10-20 mm, centring, curing, finishing etc. complete

27 (without reinforcement) Cum. 2.00 ₹ 6,550.00 ₹

CC work M-25 for Beam using aggregate of size 10-

20 mm, centring, curing, finishing etc. complete

28 (without reinforcement) Cum. 2.00 ₹ 6,250.00 ₹

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

29 not exceeding 20 cm. in depth consolidating each Cum. 6.00 ₹ 136.11 ₹

disposited layer by ramming and watering.

Providing TMT Bar FE 500D reinforcement for R.C.C.

work including bending, binding and placing in

position complete upto floor two level

20mm thick Sand Face Cement Plaster Work in

which 1 paster in proportion of 1:3 and 2nd plaster

inteh proportion of 1:2 using Cement:Mortar with

31 spong finishing etc. complete (Note: Before SqM. 9.00 ₹ 263.00 ₹

carringout Plaster work on RCC, required tipping

work should be carried out as instructed)

Plaster with grooving and Patta of size 5 cm to

cm width and 12 to 20mm thick using in proportion

Decorative Groove Work in Cement Plaster

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing, fabricating and fixing MS side hinged gate

as per approved design and drawing, of required

size, fabricated with 75mm x 40mm (3” x 1.5”) MS

RHS outer frame with required intermediate

stiffeners for structural stability, infilled with 3mm

thick CNC laser cut MS decorative sheet welded

continuously to frame, including minimum three

heavy duty MS hinges with bush per shutter,

locking arrangement, MS stopper, anchor plates,

holdfasts, complete welding, grinding, edge

finishing, erection, alignment and fixing in position,

including all materials, labour, tools, tackles,

consumables and transportation, complete in all

respects as directed by Engineer-in-Charge.

Providing, fabricating and fixing MS gate assembly

as per approved design and drawing consisting of

two fixed CNC jali panels fabricated using 75mm x

40mm (3” x 1.5”) MS rectangular hollow section

outer frame with required intermediate stiffeners

for structural rigidity, infilled with 3mm thick CNC

laser cut MS decorative sheet of approved pattern

welded continuously to frame, including heavy duty

MS hinges with bush , locking arrangement, tower

bolt, MS stopper, anchor plates, base plates,

holdfasts, necessary welding, grinding, edge

finishing, alignment, erection and fixing in position

to RCC/masonry supports, including all materials,

labour, tools, tackles, consumables, transportation,

cutting, fitting and complete installation, complete

in all respects as directed by Engineer-in-Charge.

Providing, fabricating and fixing MS side hinged

revolving entry gate of approved size ( as per

drawing), fabricated using 75mm x 40mm (3” x 1.5”)

MS rectangular hollow section outer frame with

necessary intermediate horizontal and vertical

stiffeners for structural stability, infilled with 3mm

thick CNC laser cut MS decorative sheet of approved

pattern welded continuously to frame, including

fabrication of MS hinge support plates, minimum

three heavy duty MS hinges with gunmetal/nylon

bush, heavy duty locking arrangement, tower bolt,

drop bolt, MS stopper, latch plate, handle,

necessary base plates, anchor fasteners/chemical

anchors for fixing to RCC/masonry columns,

complete welding, grinding, edge finishing, cutting,

fitting, erection, plumbing, alignment, testing and

commissioning, including all materials, labour, tools,

tackles, scaffolding, consumables, transportation

and complete installation at site, complete in all

respects as directed by Engineer-in-Charge.

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and

38 other foreign matter and scoured with brushes fine SqM. 49.00 ₹ 36.06 ₹

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter.

BOUNDRY FENCING

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff \

upto 50 Meter lead.(A) Loose or soft soil

CC work 1:3:6 using aggregate of size 10-20 mm,

curing, finishing etc. complete (without

41 reinforcement) Cum. 9.00 ₹ 4,866.00 ₹

Brick work using common burnt clay building bricks

having crushing strength not less than 35 kg./Sq.Cm.

42 in foundation and plinth in Cement Mortar 1:5. (1- Cum. 15.00 ₹ 4,203.06 ₹

Cement : 5 -fine sand)(B Conventional

CC work M-25 for RCC footing using aggregate of

size 10-20 mm, centring, curing, finishing etc.

43 complete (without reinforcement) Cum. 6.00 ₹ 5,620.00 ₹

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers

44 not exceeding 20 cm. in depth consolidating each Cum. 12.00 ₹ 136.11 ₹

disposited layer by ramming and watering.

20mm thick Sand Face Cement Plaster Work in

which 1 paster in proportion of 1:3 and 2nd plaster

inteh proportion of 1:2 using Cement:Mortar with

45 spong finishing etc. complete (Note: Before SqM. 105.00 ₹ 263.00 ₹

carringout Plaster work on RCC, required tipping

work should be carried out as instructed)

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing, fabricating, supplying and erecting MS

fabricated security fence panel comprising vertical

end posts of C-channel 100x50x5 mm, horizontal

members of C-channel 50x50x5 mm and 50x10 mm

MS vertical flats welded at required spacing,

including cutting, drilling, welding, grinding,

providing and welding 10 mm thick MS base plates,

47 erecting and fixing into RCC plinth/grade beam, Kg. 14840.00 ₹ 130.00 ₹

providing and placing non-shrink cementitious grout

below base plates, including all fixtures, fasteners,

nuts, bolts , consumables, labour, tools, tackles,

scaffolding, leads and lifts, complete in all respects

as per approved drawings and direction of Engineer-

Providing and fixing M.S. round holding down or

48 anchor bolts with nuts and washer plates complete. Kg. 535.00 ₹ 55.05 ₹

Applying priming coat over new steel and other

metel surface after and including preparing the

surface by throughly cleaning, oil,grease, dirt and

49 other foreign matter and scoured with brushes fine SqM. 504.00 ₹ 36.06 ₹

steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other

foreign matter.

URBAN FURNITURE

Providing, supplying and fixing outdoor litter bin /

dustbin, comprising powder-coated mild steel body

and internal waste container, complete with

external cladding of treated hardwood / WPC slats

of approved colour and finish, mounted on steel

frame, including top cover / open frame

51 arrangement, removable inner bin for easy cleaning, Nos. 5.00 ₹ 21,600.00 ₹

anti-corrosive treatment, weather-resistant finish,

stainless steel fasteners, provision for anchoring to

ground, and all labour, materials, tools and

incidentals complete as per drawings and directions

of Engineer-in-Charge.

TREES & PLANTATION

Excavation of Foundation in Hard Murrum from

mtr. to 1.50 mtr depth including dewatering with

52 lifting and laying in RMC limit as instructed Cum. 180.00 ₹ 141.00 ₹

Supply of sediment soil for garden(with laying work)

Supply & laying of Desi shade fertilizer

55 Supply & laying of NPK Fertilizer SqM 600.00 ₹ 10.00 ₹

56 Supply & Laying of Vermicompost fertilizer Kg 200.00 ₹ 25.00 ₹

Providing, supplying and spreading cocopeat

material of approved quality for mulching in planting

beds, shrub areas, tree basins and landscaped

zones, including transportation to site, loading and

57 unloading, labour for spreading and uniform Kg 100.00 ₹ 30.00 ₹

application to required thickness, proper leveling

and finishing, complete in all respects as directed by

Engineer-in-Charge.

Providing and laying Cynodon dactylon (Bermuda

Grass – Selection 1) lawn by turfing/sprigging

method using healthy, well-grown and weed-free

grass, including minor surface levelling and dressing,

removal of debris and unwanted material,

preparation of surface to proper slope and camber,

laying of grass uniformly, watering immediately

after laying, rolling to ensure proper root contact

with soil, and maintaining the lawn including regular

watering, mowing, weeding and care for a period of

2 months to ensure proper establishment, complete

in all respects as directed by Engineer-in-Charge

TABEBUIA ROSEA (Pink Trumpet Tree)

Supplying, planting and maintaining Tabebuia rosea

plants of 2.5 to 3.0 metre height, nursery grown in

suitable size polybags with healthy root ball, well-

developed canopy and disease-free condition,

including careful transportation to site, placement in

prepared planting pits/areas provided by others,

proper positioning and vertical alignment,

application of recommended fertilizers, soil

conditioner, fungicide and insecticide treatment at

the time of planting, initial watering, staking if

required, light pruning for shape development, and

maintenance including regular watering, weeding,

pest control and replacement of casualties for a

period of 3 months, complete in all respects as

directed by the Engineer-in-Charge.

BORSALI (Mimosops elengi)

Supplying, planting and maintaining Mimosops

elengi plants of 2.5 to 3.0 metre height, nursery

grown in suitable polybags, healthy and well-rooted,

including transportation, placement in prepared pits

provided by others, proper positioning, application

60 of recommended fertilizers, fungicide and Nos. 15.00 ₹ 1,850.00 ₹

insecticide treatment, watering, staking if required,

pruning, and maintenance including watering,

weeding, pest control and replacement of casualties

for 3 months, complete in all respects as directed.

RAIN TREE (Samanea saman)

Supplying, planting and maintaining Samanea saman

plants of minimum 3.0 metre height, nursery grown

with strong central leader and healthy root system,

including transportation to site, placement in

prepared planting pits provided by others, proper

positioning and alignment, application of

recommended fertilizers, fungicide and insecticide

treatment, initial watering, staking support if

required, light pruning, and maintenance including

watering, weeding, pest management and casualty

replacement for 3 months, complete in all respects.

TABEBUIA ARGENTEA

Supplying, planting and maintaining Tabebuia

argentea plants of 2.5 to 3.0 metre height, nursery

grown in suitable polybags with healthy root ball

and disease-free condition, including transportation,

placement in prepared planting pits provided by

others, application of recommended fertilizers,

fungicide and insecticide treatment at planting,

watering, staking if required, pruning, and

maintenance including watering, weeding, pest

control and replacement of casualties for 3 months,

complete in all respects.

PELTOPHORUM (Peltophorum

pterocarpum)Supplying, planting and maintaining

Peltophorum pterocarpum plants of minimum

metre height, nursery grown and well-rooted,

including transportation to site, placement in

prepared pits provided by others, proper

positioning, application of fertilizers and plant

protection chemicals at planting, watering, staking if

required, pruning and maintenance including

watering, weeding, pest control and casualty

replacement for 3 months, complete in all respects

KESUDO (Butea monosperma)

Supplying, planting and maintaining Butea

monosperma plants of 2.5 to 3.0 metre height,

nursery grown with healthy root ball and disease-

free condition, including transportation, placement

in prepared planting pits provided by others, proper

64 positioning, fertilizer application, fungicide and Nos. 9.00 ₹ 1,550.00 ₹

insecticide treatment at planting, watering, staking

if required, pruning and maintenance including

watering, weeding, pest control and casualty

replacement for 3 months, complete in all respects.

GULMOHAR (Delonix regia)

Supplying, planting and maintaining Delonix regia

plants of minimum 3.0 metre height, nursery grown

with well-developed canopy and healthy root

system, including transportation to site, placement

in prepared pits provided by others, proper

positioning and alignment, application of

recommended fertilizers and plant protection

treatment at planting, watering, staking if required,

pruning and maintenance including watering,

weeding, pest control and replacement of casualties

for 3 months, complete in all respects as directed by

the Engineer-in-Charge.

Supplying, planting and maintaining Mahendi

(Clerodendron inerme) plants of minimum 1.0 foot

height, grown in 6" × 8" polybags, healthy, well-

rooted, uniform in growth and disease-free, of

approved nursery quality, including placement in

prepared planting beds/pits provided by others,

66 proper alignment and spacing as per approved SqM 130.00 ₹ 517.00 ₹

layout, application of recommended fertilizer,

fungicide and insecticide treatment at the time of

planting, watering, initial trimming and shaping if

required,complete in all respects as directed by

Engineer-in-Charge.

ELECTRICAL WORK

Supplying, installing, testing and commissioning of

4.0 m high decorative GI Beacon Pole (LNX 563 or

approved equivalent) fabricated from 90 mm OD GI

pipe of required thickness with 200×200×8 mm MS

base plate and 450 mm dia aluminium post top,

complete with 50W LED luminaire (Bridgelux LED)

and LUCE make LED driver, internal wiring, MCB and

pole connector strip, powder coated finish,

including 450×12 mm L-type foundation bolts, fixing

over pre-cast RCC pedestal with proper alignment,

nut-bolt tightening, non-shrink grouting,

transportation, loading-unloading and complete

testing & commissioning, with 2-year warranty,

complete in all respects as per drawings and as

directed by the Engineer-in-Charge

Providing & erecting approved make street light /

wall mounting junction box compression moulded

from SMC (thermoset plastic) vertical sliding cover

having locking with square head stud loop in / loop

68 out in built terminal suitable for four core cable, Nos. 10.00 ₹ 610.00 ₹

waterproof of I.P. 54 protected with clamp or bolt

nut & earth bolt of following size.(B) 250mm x

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes.(4)

Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-

70 aluminium strips, rubber grommets, rib, bakelite Sqm. 0.60 ₹ 10,365.00 ₹

control fuses/MCB for measuring instruments,

earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy

duty end terminal connection,danger notice

board,necessary ventilation,earthing strip

complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains &

Copper Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base beams)

The panel shall be supplied with following approved

manufacturers with following size.(A) locally

providing panel board (i)Miniature

and erecting with 350 mm depth

circuit breaker

single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to

be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

72 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 573.00 ₹

box having following capacity (a)32 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

73 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 662.00 ₹

box having following capacity (b)40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for

Motor & Inductive Load (C Curve) having 10KA

74 breaking capacity & confirms to IS :8828 in existing Ea. 5.00 ₹ 730.00 ₹

box having following capacity (b)63 Amp. Cat.III

Providing & erecting 240 V MCB double pole switch

for lighting Load (B Curve) having 10 KA breaking

75 capacity & confirms to IS : 8828 in existing box Ea. 5.00 ₹ 293.00 ₹

having following capacity (B) 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

77 MCBs.(The DBs should be used of same company of Ea. 2.00 ₹ 3,369.00 ₹

MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)(b) sheet steel double

door (iii)8 way

Providing and erecting Sheet Steel powder coated

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of

78 MCBs.(The DBs should be used of same company of Ea. 2.00 ₹ 3,836.00 ₹

MCB to be used) suitable for (B) three phase

incoming and single phase horizontal type outgoing

Per phase isolation type (PPI)(b) sheet steel double

door (iv)12 way

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

79 V,50Hz. having characteristic of quick action & Ea. 3.00 ₹ 2,611.00 ₹

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed(ii) 40Amps. FP Cat.

providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

80 V,50Hz. having characteristic of quick action & Ea. 2.00 ₹ 3,010.00 ₹

tripping with all advance feature & do not

incorporate any electronic component. for following

Max. rating erected as directed(ii) 63Amps. FP Cat.

Providing and erecting metallic vitrified danger

notice board as per language suggested by engineer

incharge for MEDIUM VOLTAGE installation to be

erected as per IS-2551.

Providing and erecting Approved make Four pole

moulded case circuit breaker having breaking

capacity ICU of 50 KA and above at 415 V having

Normal current rating 200A. with variable Thermal

82 & magnetic release suitable to work on A.C.supply Ea. 1.00 ₹ 20,739.00 ₹

50 c/s. With all internal connections, spreader

tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

Supplying and erecting triple pole & neutral 440V /

500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density

not more than 1.6 Amp. / sq.mm (Rated current /

cross section area) duly wrapped with colour

insulating tape for phase sequence of following

current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to

each bar, erected in existing cubical panel with

necessary connections.(B) Suitable for 200 Amp.

Making trench in soft soil of suitable width of 90 cm

deep for laying cable or locating the fault all over

the run and back filling the same and making the

surface as normal ground.

Providing 1:2:4 cement concrete foundation & 70 %

PCC from bottom including excavation for the pole

of size 45 x 45 x 100 cm. Deep in below ground level

85 with plinth of 45 cm x 45 cm (or 45 cm dia x 45 cm) Ea. 30.00 ₹ 801.00 ₹

high upper ground level with necessary curing and

finishing in approved manner.( for 4 & 6 mtr pole)

MAIN & SUBMAIN WIRES

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables.

(C) 2 core 10 Sq. mm

(B) 2 core 6 Sq. mm

(A) 2 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

(A) 3 core 2.5 Sq. mm

(B) 3 core 4 Sq. mm

(C) 3 core 6 Sq. mm

(D) 3 core 10 Sq. mm

(E) 3 core 16 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm

(C) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor

for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of

(A) 4 core 16 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at

road crossing or floor of following size of cables.

(C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe at road crossing or floor of

following size of cables.

(A) 4 core 10 Sq. mm

providing and erecting Mains with ISI marked, 1.5KV

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated

conforms to IS 694, IEC - 227 erected in existing

pipe of following size (Specifically for control panel,

relays, power switchgears, motor starters & control

mmof copper lugs, nuts and

Providing and, fixing heavy duty flange type brass

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(A) 2 to 4 core 2.5 / 4 Sq. mm

(B) 2 to 4 core 6 Sq. mm

(C) 2 to 4 core 10 Sq. mm

(D) 2 to 4 core 16 Sq. mm

Solder less crimping type Aluminium lugs

conforming to IS suitable for cable of following size

evenly crimped with high pressure tool & connected

to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

CONDUIT & PIPES

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

108 fittings & Junction boxes fixed with adhesive Mtr. 50.00 ₹ 24.00 ₹

solution & Clamps with following dia of pipes, in

approved manner as directed (a)20 mm

Providing & erecting PVC Corrugated Flexible

Conduit with required nos. of coupling, PVC bushes,

Check-nuts etc. complete of following sizes. (1)

Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having

200- 250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded

by highly conductive compound with high charge

dissipation suitable for following type of applications

with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having

back filling compound of (B) Inner chemical (CCM

112 Compound)- Resistivity:- 0.2 • / meter testing as per Ea. 1.00 ₹ 10,489.00 ₹

IEC 62561-2017, Voltage drop:- < 1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retainmoisture for long time Necessary test

report must be submitted.(c) For Electrical

Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent

(c) For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs Back filling Compound :2

Providing 25 Kg

and erecting Pipe type earthing having

150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared

earth pit complete with necessary 8 SWG earth

wire. - to be used for each Street Light

For using salt and charcoal / coke as required for

pipe type earthing.

Providing one bag of 25 Kg. Additional Back Filling

115 Compound (BFC) suitable for safe earthing device. Ea. 30.00 ₹ 700.00 ₹

Providing and erecting required size Copper strip for

earthing of H.T. OCB / ACB/ Transformer, LT panel

board, Motors etc. using copper clamp.

Providing, supplying, installing, testing and

commissioning 64-channel Network Video Recorder

(NVR) of (CP Plus / Hikvision / Dahua or approved

equivalent), supporting IP cameras up to 8 MP, with

minimum 8 SATA interfaces for HDD storage,

H.265+/H.265/H.264 video compression, dual

HDMI/VGA output, multiple network ports, alarm

input/output, USB ports, RAID support (where

117 applicable), ONVIF compliance, remote monitoring Nos. 1.00 ₹ 70,500.00 ₹

through web and mobile application, complete with

power adapter, rack mounting accessories,

configuration, integration with CCTV network and all

accessories, complete in all respects as per

specifications and directions of Engineer-in-Charge.

Providing, supplying, installing, testing and

commissioning 8 MP colour dome IP camera of CP

Plus / Hikvision / Dahua or approved equivalent with

built-in microphone, featuring minimum 8 MP

(3840×2160) resolution, 1/2.8” CMOS sensor, full-

colour low-light imaging (hybrid IR / warm-light

where applicable), H.265+/H.265/H.264

compression, ONVIF compliance, fixed lens 2.8 mm

118 / 4.0 mm as specified, minimum 30 m IR / white- Nos. 4.00 ₹ 13,200.00 ₹

light illumination, IP67 weatherproof and IK10

vandal-resistant housing, PoE (IEEE 802.3af) power,

including fasteners, alignment, configuration,

testing and commissioning, complete in all respects

as per specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning 8 MP colour bullet IP camera of CP

Plus / Hikvision / Dahua or approved equivalent with

built-in microphone, having 1/2.8” CMOS sensor,

minimum 8 MP (3840×2160) resolution, colour

imaging in low light (supplementary warm light

where applicable), H.265+/H.265/H.264

compression, ONVIF compliance, fixed lens (2.8 mm

119 / 4.0 mm as specified), minimum 30 m IR / white- Nos. 12.00 ₹ 13,200.00 ₹

light illumination, IP67 weatherproof housing, PoE

(IEEE 802.3af) support, integrated audio capture,

including all fasteners, alignment, configuration,

testing and commissioning, complete in all respects

as per specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning 8-port Gigabit PoE Ethernet switch

of CP Plus / Hikvision / TP-Link or approved

equivalent with SFP uplink, comprising 8 nos.

10/100/1000 Mbps RJ-45 PoE ports compliant with

IEEE 802.3af/at, with minimum 2 nos. SFP ports for

fibre uplink, total PoE power budget not less than

120 120 W, supporting VLAN, QoS, IGMP snooping, Nos. 2.00 ₹ 4,500.00 ₹

surge protection, fanless / low-noise operation

(where applicable), including power cord, mounting

accessories, patching, basic configuration, testing

and commissioning, complete in all respects as per

specifications and directions of Engineer-in-Charge

Supply, installing, testing and commissioning of

central management software for Viewing, multi-

NVR management, suppoerting all cameras at one

121 single screen and maximum devices management, Nos. 1.00 ₹ 15,000.00 ₹

auto search configuration and status monitoring as

per instruction by EIC/Consultant.

Providing, supplying, installing, testing and

commissioning 8 TB capacity surveillance-grade

hard disk drive of Seagate / Western Digital /

Toshiba or approved equivalent, specifically

designed for 24×7 continuous video recording,

compatible with Network Video Recorders (NVRs),

supporting SATA III interface, minimum 5400–7200

RPM, cache not less than 256 MB, optimized for

multi-camera environments, low power

consumption and high reliability, including mounting

in NVR, formatting, configuration, health check and

testing, complete in all respects as per directions of

Engineer-in-Charge

Providing, supplying, installing and commissioning

24U floor-mounted network/server rack, fabricated

from heavy-gauge CRCA steel, 19-inch standard,

with front toughened glass door, lockable

rear/perforated door, removable side panels,

adjustable mounting rails, cable entry provisions at

top and bottom, complete with 2 nos. cooling fans,

123 1 no. rack-mount Power Distribution Unit (PDU) Nos. 1.00 ₹ 20,000.00 ₹

with surge protection, earthing provision, hardware

accessories, leveling feet/casters, installation,

alignment and testing, complete in all respects as

per specifications and directions of Engineer-in-

Providing, supplying, installing, testing and

commissioning PoE junction box for IP CCTV camera,

made of weatherproof polycarbonate / powder-

coated aluminium enclosure, suitable for outdoor

installation, including RJ45 CAT-6 termination, PoE

pass-through / coupler, cable glands, internal

mounting plate, gasket sealing, fixing on pole / wall /

structure, proper cable dressing, weatherproofing,

testing and commissioning, complete in all respects

as per specifications and directions of Engineer-in-

Providing, supplying, installing and fixing junction

box of size 5" × 5", made of heavy-duty PVC /

polycarbonate / powder-coated metal as specified,

suitable for indoor / outdoor application, including

cover with gasket, cable entry knock-outs, terminal

125 connectors, screws, rawl plugs, fixing on wall / pole Nos. 16.00 ₹ 75.00 ₹

/ structure, proper alignment, sealing, testing and

making good, complete in all respects as per

directions of Engineer-in-Charge

Providing, supplying, installing, testing and

commissioning 40-inch LED television of LG /

Panasonic / Nextview or approved equivalent , with

Full HD resolution (1920×1080), minimum two

HDMI ports and one VGA port, USB interface, built-

in speakers, wide viewing angle, suitable for 24×7

display operation, including wall-mount bracket /

table stand (as specified), power cord, basic

configuration, connection testing and

commissioning, complete in all respects as per

specifications and directions of Engineer-in-Charge

Supplying & erecting approved make LAN cable of

127 following size in existing pipe as per direction Mtr. 850.00 ₹ 47.00 ₹