Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC MAHARAJA SOCIETY HAPA YARD ROAD NR ALFA PAN STREET NO 6 O S KALWADGET JAMNAGAR GUJ | L1 | Accepted-AOC Accepted for acceptance being lowest. | |
| 2 | L2₹18.3 L+₹37,121 (2.06%)Rejected-Finance | L2 | Rejected-Finance Not L1. | |
| 3 | L3₹20.1 L+₹2.1 L (11.9%)Rejected-Finance 05 AYODHYA NAGAR NEAR RAM MANDIR BEHIND HARIYA COLLEGE GOKUL NAGAR JAMNAGAR 361004 | JAMNAGAR | JAMNAGAR | GUJARAT | 361004 | L3 | Rejected-Finance Not L1. |
| Sl No | Description | Qty | Unit | KEVAL ENTERPRISE L3 | Honest builders L2 | sanu enterprise L1 |
|---|---|---|---|---|---|---|
| 1.00 | Taking down shutters of any description n.exc 1 Sqm each | 10 | Per leaf | 30 ₹300 Lowest | 53 ₹530 | 100 ₹1,000 |
| 2.00 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each | 45 | Per leaf | 50 ₹2,250 Lowest | 72 ₹3,240 | 150 ₹6,750 |
| 3.00 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed. | 15 | Each | 100 ₹1,500 Lowest | 192 ₹2,880 | 200 ₹3,000 |
| 4.00 | Taking down chowkats or frame with shutter (with out taking off shutter from the frame) exc. 1.5 Sqm and n. exc 4.0 sqm area of each complete all as specified and directed. | 30 | Each | 150 ₹4,500 Lowest | 200 ₹6,000 | 250 ₹7,500 |
| 5.00 | S&F IInd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. | 0.15 | Cum | 42,500 ₹6,375 Lowest | 45,000 ₹6,750 | 50,000 ₹7,500 |
| 6.00 | S & F 35 mm thick IInd class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed. | 70 | Sqm | 2,000 ₹1,40,000 Lowest | 2,300 ₹1,61,000 | 2,000 ₹1,40,000 Lowest |
| 7.00 | S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. | 70 | Sqm | 1,700 ₹1,19,000 Lowest | 1,800 ₹1,26,000 | 1,800 ₹1,26,000 |
| 8.00 | S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening complete all as specified and directed. | 130 | RM | 250 ₹32,500 Lowest | 400 ₹52,000 | 400 ₹52,000 |
| 9.00 | S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long as per specification and drawing complete all as specified and directed. | 60 | Sqm | 2,500 ₹1,50,000 | 3,040 ₹1,82,400 | 2,300 ₹1,38,000 Lowest |
| 10.00 | S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 55 | Sqm | 800 ₹44,000 | 453 ₹24,915 Lowest | 600 ₹33,000 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
9 Aug 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jamnagar No.2
Air Force-II, Udhyog Nagar, Jamnagar - 361004
REPAIR TO KITCHEN CABINET, JOINERY AND THEIR CONNECTED ITEMS IN OMQ AT AF-I UNDER GE (AF) JAMNAGAR NO.2
2025_MES_720090_1
8590/E8
Open Tender
Civil Works
Item Rate
270 days
Jamnagar
Please refer tender documents and NIT
6 documents required · 6 mandatory
₹500
GE (AF) Jamnagar No.2
₹40,000
Yes
6 Nov 2025
12 Jul 2025
11 Aug 2025
12 Jul 2025
9 Aug 2025
26 Jul 2025
Amount
Taking down shutters of any description n.exc 1 Sqm each
Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each
Taking down chowkats or frame with shutter (with out taking off shutter from the frame) n.exc 1.5 Sqm complete all as specified and directed.
Taking down chowkats or frame with shutter (with out taking off shutter from the frame) exc. 1.5 Sqm and n. exc 4.0 sqm area of each complete all as specified and directed.
S&F IInd class H.W Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S & F 35 mm thick IInd class HW Glazed and skeleton door shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters complete all as specified and directed.
S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent coment for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, including stainless steel butt hinges 100 mm long, Aluminium tower bolt tower bolt 100 mm long and Aluminium handle 150 mm long as per specification and drawing complete all as specified and directed.
S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40 mm to wooden/ iron/ aluminium frame with wooden/iron/ aluminium beading and fixed with nails/ nut & bolts or wire staples complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick figured glass pin head type glazing with oil putty n.exc 0.50 Sqm in each pane fixed to wooden/metalic frame complete all as specified and directed.
Welding in repairs over metal/steel surfaces of any thickness exc 2.5 cm & n exc 5 cm in length complete all as specified and directed.
M & L for 100mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.
M & L for 75mm long butt hinges, medium weight, cold rolled, mild steel and fixed complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S&F 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S&F 150mm long aluminium handle fabricated type anodised complete all as specified and directed.
S&F 250mm x 16mm dia aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.
S & F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Dismantling of granite tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons cills or plateform etc complete all as specified and directed.
M&L for granite work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified and directed.
S&F aluminium powder coated (minimumthickness of powder coating 50 micron) three track window ( two shutters glazed ) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all two shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20831) (b) Frame (bottom) section shall be of size 92.00 x 31.75 x 1.50 mm (Section No 20832) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20738) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.45 (Section No 20737) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.55 (Section No 20736) Note:- Section No given above are of make Jidal, Contractor may use similar section of other make mention in Appx B.
S&F aluminium (powder coated with approved colour) ventilator, partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frostade glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B
M & L for Aluminium doors, powder coated (of approved colour), with frame of section 100 x 44mm x 2.5mm thick and shutter with bottom rail of section 150 x 44.5 x 2.5mm thick, middle rail of section 85 x 44.5 x 2.5mm thick and top rail of section 80.4 x 44.5 x 2.5mm thick and styles of section 80.4 x 44.5 x 2.5mm thick with 4mm thick glass (plain/tinted/with laminated film) or prelaminated board fixed in position with aluminium beading including necessary rubber gaskets and 2 Nos. aluminium push plate handle of aluminium section 150mm wide and 2.5mm thick including 150mm aluminium tower bolt, brass mortice lock complete all as per Drawing No. CEAA/TD/63 sheet No. 2.2 complete all as specified and directed. Note:-(i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B
S & F in repair 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F in repair for mild steel butt hinges medium grade 100 mm size complete all as specified and directed.
S & F in repair for mild steel butt hinges, medium grade 75mm size complete all as specified and directed.
S & F in repair 150mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F in repairs 100mm long aluminium anodised barrel tower bolt complete all as specified and directed.
S & F in repair 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F in repair 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of steel cast or extruded section or cast aluminium alloy complete all as specified and directed.
S & F in repair 25 mm dia curtain rails, mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc.decorative type complete all as specified and directed.
Repairs and fixing only existing curtain rails, mild steel, chromium plated with fixing brackets/concealed brackets & holders, stops, rollers etc decorative type complete all as specified and directed.
S&F mild steel hold fast and similar works fabricated with mild steel section conforming to Fe 290 Gde E-165 complete all as specified and directed.
Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.
Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.
M&L for preparing sufaces of new, previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and priming with pink primer and applying two coats of synthetic enamel paint all as specified and directed.
S&F in repairs Hasp and staple 75mm size, of aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified and directed.
S&F in repairs 300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs door closer hydraulically regulated, designation No.2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M & L for framed work such as grills, gratings, etc. with ends of bars houldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for painting to new steel surface of any description over 10cm width or grith not otherwise described including preparation, priming with zinc chromate and two coats of synthetic enamel paint complete all as specified and directed.
M&L for 18/19 mm thick plywood (12 Nos of ply) grade BWR, type BB fixed width screws to timber frame work or plywood for kitchen cupboard, shelves and cupboard complete all as specified and directed.
M & L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive for kitchen cupboard,shelves and cupboard as per manufacturer's instructions complete all as specified and directed.
S&F 75mm size SS cup board hinges medium weight cold rolled complete all as specified and directed.
S&F magnatic catcher and connected plate to shutters and frame as per sample complete all as specified and directed.
S&F 100mm long aluminium handle fabricated type anodised complete all as specified and directed.
S&F in repair telescopic channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty etc complete all as specified and directed.
S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.
S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position complete all as specified and directed.
S&F in repair kitchen basket fabricated with stainless steel section (SS-304), best quality of size 430 mm x 508 mm x 300 mm for different use such as placing plain plate / dish / cup & saucer / cutlery / thali etc fixed in position.
Honest builders (BID ID -3388109)
KEVAL ENTERPRISE (BID ID -3387891)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .