Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 LAdmitted-Finance MAHESHPUR SAMSI RATUA MALDA 732139 | MALDAH | WEST BENGAL | 732139 | ₹1.4 L | L1 | Admitted-Finance |
| 2 | L2₹1.4 LAdmitted-Finance 07 SUKHATOLA DUMARI KASIA KUSHINAGAR UTTAR PRADESH 274402 UDYAM UP 47 0024514 | KUSHI NAGAR | UTTAR PRADESH | 274402 | ₹1.4 L | L2 | Admitted-Finance |
| 3 | L3₹1.4 LAdmitted-Finance | ₹1.4 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | J. S. Enterprise L2 | TAPAN DAS L1 | Matri Enterprise L3 |
|---|---|---|---|---|---|---|
| 1.00 | SUPPLYING & FIXING ROLLING SHUTTERS OF APPROVED MAKE,
MADE OF REQUIRED M.S. LATHS, INTERLOCKED TOGETHER
THROUGH THEIR ENTIRE LENGTH AND JOINTED TOGETHER AT
THE END BY END LOCKS, MOUNTED ON SPECIALLY DESIGNED
PIPE SHAFT WITH BRACKTS, SIDE GUIDES AND ARRANGEMENTS
FOR INSIDE AND OUTSIDE LOCKING WITH PUSH & PULL
OPERATION COMPLETE, INCLUDING THE COST OF PROVIDING &
FIXING NECESSARY 27.5 MM LONG WIER SPRINGS
MANUFACTURED FROM HIGH TENSILE STEEL WIER OF
ADEQUATE STRENGTH CONFORMING TO IS: 4454 - PART I AND
M.S. TOP COVER OF REQUIRED THICKNESS FOR ROLLING
SHUTTER. 80 X 1.25 MM M.S. LATHS WITH 1.25 MM THICK COVER.
27.5 mm long wier springs manufactured from high tensile steel wire of
adequate strength conforming to IS: 4454 - par 80 x 1.25 mm M.S. laths
with 1.25 mm thick cover. | 20 | SQM | 3,750 ₹75,000 | 3,700 ₹74,000 Lowest | 3,850 ₹77,000 |
| 2.00 | EXTRA FOR PROVIDING MECHANICAL DEVICE CHAIN & CRANK
OPERATION FOR OPERATING ROLLING SHUTTERS. Mechanical
device chain & crank operation | 20 | SQM | 1,290 ₹25,800 | 1,200 ₹24,000 Lowest | 1,250 ₹25,000 |
| 3.00 | EXTRA FOR PROVIDING GRILLED ROLLING SHUTTERS
MANUFACTURED OUT OF 8 MM DIA M.S. BAR INSTEAD OF LATHS
AS PER DESIGN APPROVED BY ENGINEER-IN-CHARGE. Grilled
rolling shutters manufactured out of 8 mm dia M.S | 20 | SQM | 1,250 ₹25,000 Lowest | 1,250 ₹25,000 Lowest | 1,300 ₹26,000 |
| 4.00 | PRIMING ONE COAT ON STEEL OR OTHER METAL SURFACE
WITH SYNTHETIC OIL BOUND PRIMER OF APPROVED QUALITY
INCLUDING smoothening surfaces by sand papering etc | 40 | SQM | 62 ₹2,480 | 60 ₹2,400 Lowest | 80 ₹3,200 |
| 5.00 | PAINTING WITH BEST QUALITY SYNTHETIC ENAMEL PAINT OF
APPROVED MAKE AND BRAND INCLUDING SMOOTHENING
SURFACE BY SAND PAPERING ETC. INCLUDING USING OF
APPROVED PUTTY ETC. ON THE SURFACE, IF NECESSARY : With
other than hi-gloss of approved quality- Two coats (with any shade
except white) | 40 | SQM | 130 ₹5,200 | 120 ₹4,800 Lowest | 123 ₹4,920 |
| 6.00 | Labour for taking out of rolling shutter along with all related
accessories | 20 | SQM | 280 ₹5,600 Lowest | 310 ₹6,200 | 300 ₹6,000 |
Tender Value
₹1.5 L
EMD Value
₹2,900
Closing Date
16 Jun 2026, 5:00 pmClosed
SVP Commercial
Webel Bhavan Salt Lake Sec V EP GP Block Kolkata 91
Replacement of rolling shutter at SDF Building
2026_WEBEL_1027394_1
WEBEL/ EOT/W/26-27/000045 Dated 04/06/26
Open Tender
CIVIL WORKS
Item Rate
45 days
SDF Building Salt Lake Sec V Kolkata
Please refer to the tender document
6 documents required · 6 mandatory
₹500
₹2,900
Yes
23 Jul 2026
10 Jun 2026
18 Jun 2026
10 Jun 2026
16 Jun 2026
10 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | SUPPLYING & FIXING ROLLING SHUTTERS OF APPROVED MAKE,
MADE OF REQUIRED M.S. LATHS, INTERLOCKED TOGETHER
THROUGH THEIR ENTIRE LENGTH AND JOINTED TOGETHER AT
THE END BY END LOCKS, MOUNTED ON SPECIALLY DESIGNED
PIPE SHAFT WITH BRACKTS, SIDE GUIDES AND ARRANGEMENTS
FOR INSIDE AND OUTSIDE LOCKING WITH PUSH & PULL
OPERATION COMPLETE, INCLUDING THE COST OF PROVIDING &
FIXING NECESSARY 27.5 MM LONG WIER SPRINGS
MANUFACTURED FROM HIGH TENSILE STEEL WIER OF
ADEQUATE STRENGTH CONFORMING TO IS: 4454 - PART I AND
M.S. TOP COVER OF REQUIRED THICKNESS FOR ROLLING
SHUTTER. 80 X 1.25 MM M.S. LATHS WITH 1.25 MM THICK COVER.
27.5 mm long wier springs manufactured from high tensile steel wire of
adequate strength conforming to IS: 4454 - par 80 x 1.25 mm M.S. laths
with 1.25 mm thick cover. | - | SQM | - | - |
| 2 | EXTRA FOR PROVIDING MECHANICAL DEVICE CHAIN & CRANK
OPERATION FOR OPERATING ROLLING SHUTTERS. Mechanical
device chain & crank operation | - | SQM | - | - |
| 3 | EXTRA FOR PROVIDING GRILLED ROLLING SHUTTERS
MANUFACTURED OUT OF 8 MM DIA M.S. BAR INSTEAD OF LATHS
AS PER DESIGN APPROVED BY ENGINEER-IN-CHARGE. Grilled
rolling shutters manufactured out of 8 mm dia M.S | - | SQM | - | - |
| 4 | PRIMING ONE COAT ON STEEL OR OTHER METAL SURFACE
WITH SYNTHETIC OIL BOUND PRIMER OF APPROVED QUALITY
INCLUDING smoothening surfaces by sand papering etc | - | SQM | - | - |
| 5 | PAINTING WITH BEST QUALITY SYNTHETIC ENAMEL PAINT OF
APPROVED MAKE AND BRAND INCLUDING SMOOTHENING
SURFACE BY SAND PAPERING ETC. INCLUDING USING OF
APPROVED PUTTY ETC. ON THE SURFACE, IF NECESSARY : With
other than hi-gloss of approved quality- Two coats (with any shade
except white) | - | SQM | - | - |
| 6 | Labour for taking out of rolling shutter along with all related
accessories | - | SQM | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.70 MB
BOQ_2523709.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].