SPECIAL REPAIR TO BLDG NO T 13 OF INF BN TOILET BATHROOM OF BLDG NO P5 COMMA P7 P35 OF TA COY AND BLDG NO P36 COMMA P37 COMMA P38 AND P39 OF AT COY AT SUNDERBANI UNDER GE NORTH AKHNOOR

Amount

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement with using water proofing compound.(WPC shall be measured and paid seperately).

M&L for rendering 15mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement.

Supply only Integral waterproofing compound.

M&L for rendering 5mm thick cement plaster with cement mortar(1:4) on ceiling and finished even and smooth without using extra cement .

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. all as specified and directed.

M&L for brushing neat cement slurry with 3.0kg of cement per sq. Metre all as specified and directed.

M&L for rendering 10mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

M & L for preparation of newly/Old plastered surfaces of walls and applying two coat of oil bound distemper over one coat of primer all as speicfied and directed.

M&L for preparation of newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Demolition brick work or stone boulder masonry built in CM including all quoins arches etc., but excluding ashlar masonry all as specified.

Brickwork with sub class ‘B’ (old size) bricks, straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 including demolition of existing brick masonary built in cement mortar including all quoins arches etc but excluding ashlar masonry complete all as specified and as directed by Engineer -in-Charge.

Ditto all as per item No 13 but except brick.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) ,removing serviceable tiles to store and rubbish off the premises as specified and directed.

M&L for Glazed ceramic tiles, coloured 300x200x6-7mm thick on vertical surface such as skirting/dado over & jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles including 10 mm thick in CM 1:4 bedding layer to receive tiles complete all as specified and as directed by Engineer-in-Charge.

Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6 all as specified & directed.

Taking down chowkhat or frames of door/ window / ventilators with shutter(Without taking off shutter from the frame) n.exc 1.50 m each all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each.

Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F figured glass sheet, 3mm thick, pin head type and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane all as specified & directed.

S&F Aluminium handles cast type anodised of size 150mm long ISI marked complete.

S&F Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

S&F 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S & F PVC (SWR) floor trap 75mm plain with grating including joints with solvents cement completed all as specified and directed.

S&F 100 mm butt hinges, medium weight cold rolled mild steel all as specified and directed.

S&F in repair Vitreous china, urinal, half stall type, white (back or corner wall type), complete including waste pipe,coupling and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for discharge pipe all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 300/450mm size complete all as specified and directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) all as specified and directed..

S&F Vitreous china, squatting pan, Orissa pattern, size 580x440mm white with integral foot rests ( excluding flusing cistern, flush pipe and waste pipe) fixed in repair all as specified & directed.

S&F in repair Wash down water closet (Pedestal pattern), complete fixed in repair incl connection to trap and flushing pipe etc & making good to floor all as specified & directed.

S&F Vitreous china, wash hand basin (WHB) flat back size 630x450mm including pillar tap, waste fittings , brackets all as specified & directed.

S&F PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs.

S&F Salt glazed stoneware gully trap, square or round mouthed type 'P' of size 150x150mm

Concrete bed in PCC 1:4:8 type-D-2 (using 40mm graded crushed stone aggregate) to drain pipe 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

S&F 150 mm dia Salt glazed stoneware drain pipes grade A all as specified & directed.

S&F Angle/stop cock valve of CP any colour high pressure screwed for iron pipe of dia 15 mm.

S&F in replacement; steel chromium plated round grating 100mm dia, fixed in position in cement mortar (1:3) complete all as specified.

M&L for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc incl Disconnecting existing water tank , setting aside all as specified & directed.

Bib taps, cast fancy type , chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, supplied and fixed in repairs complete all as specified.

S&F stop valves cast copper alloy serwed down high pressure with crutch or butterfly handle 15mm dia bore fixed in repairs all as specified and directed.

S&F in repir 20mm bore float valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed .

S&F Brass chromium plated shower rose 125mm with or without swivel joints, including fixing to steel pipe or union all as specified.

S&F stop valves cast copper alloy serwed down high pressure with crutch or butterfly handle 20mm dia bore fixed in repairs all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by Engineer-in-Charge.

S&F Steel water tubing medium grade galvanised ISI marked with all fitting and fixed to wall and ceiling or laid in floors of 15mm bore all as specified and directed.

M&L for Refixing only 15 mm bore old steel tubing and connections in new or old position on walls(including cutting chases in existing stone masonry walls), ceiling or laid in floors complete all as spfd & directed.

Mild steel galvanized steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete of 20 mm dia bore

M&L for Refixing only 20 mm bore old steel tubing and connections in new or old position on walls, ceiling or laid in floors complete.all as specified & directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass-concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) complete all as specified & directed.

M&L for chequerred cement concrete colour tiles 20 cm x 20 cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in CM (1:6) complete all as specified and as directed by Engineer-in-Charge.

M&L for Sand filling under floors or in foundation including watering and consolidation as sand cushioning 25mm thick .

Providing cement concrete type C-2, 1:3:6 ( using 20mm graded stone aggregate), 75 mm thick as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete bays and in between the walling and plinth protection, filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand ( all by weight).

Taking down old treatment including padding, removing existing bitumen felt treatment including brushing, cleaning top surface of roof slab, brooming etc complete all as specified and directed.

M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair finishes of brick work or concrete surface of roof slab all as specified.

M&L for rendering 5mm thick cement plaster with cement mortar(1:3) on concrete surface as in ceiling finished even and smooth without using extra cement.

Rendering 10 mm thick in cement and sand mortar 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth (without using extra cement) complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying two coats of white wash complete all as specified and directed.

S & F Steel window/ventilator (Box type) factory made with double shutter (wire gauged shutter and glass/glazzed shutter, wire cloth and glass paned shall be measured and paid separately of size 79mm x 39 mm, 16 guage rectangular tubular frame with side hung. fixed in repairs complete all as specified and directed.EUZ/TD/1269/2008 Sheet 1/1 to 1/3.

S&F figured glass sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane.

S&F ball valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball 20mm dia bore.

S&F Aluminium anodised towel rail 20mm dia 'D' type 60 cm long between flanges .

S & F stainless steel cockraoch traps Single piece in a box size 101 x 101mm with waste hole complete all as specified fixed in repairs. Make : PRAYAG CAT NO - FT-23/EQUIVALENT

S& F liquid soap container of PTMT fixedwith and including chroumium plated brass screws and wooden/plastic cleats(mm weight 105gms) fixed in repairs complete all as specified and directed.

S & F CP angle valve/concealed stop cock of cast copper alloy (ISI Marked) chromium plated fancy type scrwed down high pressure with capstain head screwed both ends for iron pipe 15mm bore incl add if fixed in repairs complete all as specified and directed.

S & F in repairs chromium plated fancy type pillar tap with lift type operating knob and base flange, 15mm bore dia all as specified and as directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors/skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:4 all as specified and as approved by the GE/Engr-in-Charge.

M& L Galvanised steel powder coated snap grid frame work of size 605x605 mm for false ceiling with 600x600x4mm fibre cement board alongwith applying three coats of white wash on board incl necessary notching and preparing holes porting hangers comprise of GI wire for securing frame work to ceiling and snap grid including taking down of existing old/broken false ceiling all as specified by Engr in charge.

M & L Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates complete including one shop coat of red oxide primer, providing mild steel 6 mm dia thresh old bar and filling hollow of frame .

PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame.and including 50 mm parapet coping all as specified etc complete all as specified and directed by Engineer-in-Charge.

S & F Factory made Plain framed second class hard wood panelled shutter (Two panel), 35 mm thick with lock rail and panel of 12 thick veneered particle board with commercial veneering on both face. The size of rail and style as per IS-1003 (Part-I), Kiln seasoned and chemically pressure treated.

S&F Glazed and skelton shutters 30 mm thick second class hard wood, opened rebated and prepared to receive wire mesh etc, edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for sucuring witre mesh etc. Size of members of shutters as specified in SSR Part-I, Sec-8, clause 8.24(a).

Mild steel springs for doors, 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,nodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer.

M&L preparation of new steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

S&F Glazing with sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane all as specified & directed.

S&F curtain rail, 20 mm dia anodised aluminium alloy ,cromium plated fixed with braket, incl taking down of old curtain rods, all as directed.

M& L for 75 mm thick cement concrete type B-1, 1:3:6 using 40 mm graded aggregated as in sub floor, all as spd & directed by Engr-in- Charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming IS 15658-2006 of 60mm thickness M-35 grade over a layer and including 25mm thick sand cushioning complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 using 20 mm graded aggregate as in sub floor. All as spd & directed by Engr- in -Charge.

Dismantling plain or corrugated AC sheeting, any guage, thickness, roof covering all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof overing/ cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof overing/ cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; and getting out in soft/loose soil for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out, complete all as specified.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified & directed.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed.

M&L Cement concrete in foundations, filling and mass-concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) complete all as specified & directed.

M&L for rendering 15mm thick cement plaster with cement mortar(1:4) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement .

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface and colour shade with putty and white cement at necessary holes for smooth finishing complete all as specified and directed complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Casing Caping 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (a) One light point/fan /bell point controlled by one switch. Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

(b) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

(c) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

Material and labour for point wiring complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Casing Caping/Conduit 20 mm dia medium grade and including cutting, chasing work at any height and all accessories are concealed in walls / roofs / floors / ceiling etc. metal flush box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover plate as per numbers of switch modules for modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures and including 2.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (a) One 15 amps power socket outlet point controlled by one 16 amps switch on independent board.Make of Cables Havells, KEI,Anchor (Note:- All necessary accessories such as modular steel box,top cover plate, blank plate, screws,washers and all modular electrical fixtures are to be used of same make/brand only and shall be deemed in to included in quoted rate only.)

Switch piano, flush button 5 Amps, single pole one way.

Switch piano, flush button 15 Amps, single pole one way.

Socket outlet, 2 in 1, 5 pin, 5 Amps, universal type, ISI marked, complete all as specified

Socket outlet, 2 in 1, 5 pin, 15 Amps, universal type, ISI marked, complete all as specified

S & F exhaust fan, steel body AC single phase 230Volt of size 300mm sweep with blades and frame and louvers.

Supply and fixing sheet metal enclosure double door type for DBs single pole and neutral 4 way 240 V with 200 Amp bus bar including blanking plates where required . Make : Indoasian, Legrand, Schiender, Havells etc.

M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLS type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 2.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface including cutting and cheasing and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 2.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Make of Cable Havells, KEI, Anchor

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Cat Pt No. HEXAFT10WLED857SSYMBOPC, Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

S & F for wall mounted LED tube light fitting 20 watts ,220V AC decorative box type with driver holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose completet :- Make Havells \ Bajaj\ Wipro or its equvalent in Philips, Havells.

S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 6 Sqmm x 2 core.

Earthing complete with steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1,5 metres below normal ground level,connecting to the Galvanised iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and steel earthwire protected by provision of GI Medium grade pipe 15 mm bore including provision of concrete pit made from PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25 x 25 x 6 mm with lugs 02 No and with 6 mm dia MS bar handle made to shape GI medium grade 20 mm bore pipe for watering perforated at bottom, 1.75 metere long placed on top edge of earth plate, common salt and charcoal fittings, test point made out of 17 mm x 8 mm FI with fixing arrangement, funnel wire mesh and earth work in hard / dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 M all as per electrical plate No 3 of SSR Part- I connected to earth test point all as specified or indicated including testing on completion.

Excavation in tranches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation of laying cable including getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specifed .

Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .

M & L for GI tubing light grade with all necessary GI fittings like bends, elbow, unions, tees, sockets, short pieces, plugs, hooks/clamps etc. as required at site and laid in trenches as specified and directed for 80 mm dia in bore.

M&L sand cushioning to underground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying laying the cable all as specified in cause 19.75 of MES Schedule Part - I .

Bricks laid in trenches for cable protection well burnt sub class 'B' bricks complete all as specified.

S & F ceiling fans complete with blades, down rods, electronic regulators and accessories, 230V,1200mm sweep.Min air delivery 210CFM with serviece value 6.00 BEE five star rated with brushless direct current motor(BLDC)

NATIONAL TRADING COMPANY