63/2023-Renovation of Mulakkulam Health Centre and Compound wall in piravom muncipality ward-16

Amount

Renovation of Mulakkulam Health Centre

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

OD62474/2023-2024:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall (51.20) be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. Material M MR Precoated galvanised iron profile sheet 0.35mm TCT (MR1269) sqm 233.65000 367.00 85749.55 M1 1023 Galvanised steel J or L hooks 8 mm dia 10 nos 476.00000 120.00 5712.00 M2 1208 Bitumen washer 100 nos 476.00000 30.00 142.80 M3 1209 G.I. Plain washer thick 100 nos 476.00000 35.00 166.60 M4 Carriage C EST No. :LSGD/CELSGD/EST/826/2022_5_4_3/RE 1 (Edit Id : 1) (Dsor year : 2018,Cost Index (Place : Ernakulam,Value : 135.59),GST : 18% Printed On 2023-05-15 14:28:10.081 17 SOR/Spec Code MR code Description/Remarks Unit Quantity Rate Amount Label 9977 Carriage L.S 8.06000 2.00 16.12 C1 Labour L 0130 Mistry Day 2.34000 738.00 1726.92 L1 0112 Carpenter 2nd class Day 9.34000 679.00 6341.86 L2 0114 Beldar Day 9.34000 558.00 5211.72 L3 Tools&Plants(Hire charges) T 9999 Sundries L.S 39.52000 2.00 79.04 T1 Total 216.140 sqm 105146.61 Unit Total 1.000 sqm 486.47 Add Water Charge 486.47 @1.00% 4.86 Total 491.33 Add Contractors Profit & Overhead 491.33 @15.00% 73.70 Total 565.03 Add Cost Index 104.24 @35.59% 37.10 Total 602.13 Add Tender Variation 141.34 @-16.84% -23.80 Total 578.33 GRAND TOTAL sqm 578.33

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD62635/2023-2024:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required color and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD70404/2023-2024:Engaging man coolies

NEDIYORAM CONSTRUCTION

Bidder Name

ROY M.T

NEDIYORAM CONSTRUCTION