MLA SDF 2024 2025 Honorable Speaker Adv AN Shamseer MLA Thalassery BP Improvement works for Ward 12 Safiya Askharveedu muthal Al maskhveedu vere in New Mahi GP General Civil Work General Civil Work

3.5.3:Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3

4.1.A.2:Granular Sub-base with Well Graded Material (Table 400.1)(A) By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

11.4.1.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I. P.C.C grade M 10 (i) Nominal mix 1:3:6

11.4.2.1:Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 II. P.C.C grade M 15 (i) Nominal mix (1:2.5:5)

75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)

OD443928/2025-2026:Steel work for handrail with G.I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete ( modified spec50.10.2)

OD160125/2026-2027:Supplying and fitting name boards of size 75cm x 45cm made with GI plain sheets 1.25mm thick (class III) fitted with 35x35x4 mm MS angle 2 Nos horizontally and 3 nos vertically to make a frame for strengthening the GI sheet , fitted 2 nos 32mm GI pipe vertically 90cm above from ground level and fixing in cement concrete 1:2:4 , 30 x 30 x 30cm including cost and conveyance of all materials all labour charges , fabricating etc. complete