PROVISION OF RECREATIONAL AREA AT CGDHQ-4 KOCHI

Amount

Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in soft/loose soil getting out complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

Returning, filling in soil including spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed.

Removing excavated material exceeding 250 M and not exceeding 500 M and depositing outside MD land at a level not exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for precast cement concrete solid block masonry using Solid PCC block type C4 exceeding 10 Cm width, built in cement mortar 1:4 all as specified and as directed.

Material and Labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for for applying two or more coats of 100% premium acrylic emulsion paint having VOC not less than 50 gm/lit and UV resistance as per IS 15489-2004, dust, alkali and fungal resistant, of approved shadewith silicon additives @ 1.43 lit/10Sqm over a coat of primer @ 0.9Lit per 10 Sqm complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed

Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mmx1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 4mm thick Non asbestos fibre cement building boards, fixed in ceiling, flat or sloping and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed. Note :- Rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site.

Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 35mm thick with lock rail and with panels of timber flat on both edges(feather edged) or 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with shine pinned at joints, fixed to wall and making good to wall all as specified and directed.

Material and Labour applying two coats synthetic enamel paint over one coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation of surface etc., complete all as specified and directed.

Supply and fix powder coated Aluminium frame and partition wall with one or more rebates including joining cleats for fixing etc. all as specified and directed. (Thickness or powder coating not less than 50 micron) all as specified and as directed. Note: Quoted rate shall be inclusive of rubber beading, glazing clips. Glass pane shall be measured and paid separately.

Supply and fix Anodised aluminium door shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised hinges suitable handle (2 nos.) complete all as specified and directed. Note: Glass pane shall be measured and paid separately.

Supply and fix powder coated, aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and fix 4.00 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed.

Supply and fix door closer hydraulically regulated, designation No.3 universal type, of Aluminium (extruded section body)suitable for door shutters of 851 to 1000mm width and of weight between 61 to 80kg complete all as specified and as directed.

Material and labour for 100mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in flooring for approach of parking/ramp, laid in alternative bays, finished even and smooth with XPM impression without using extra cement including necessary form work all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm in vertical surface such as dados, set and jointed in neat cement slurry over and including backing coat of 10mm thick in CM 1:4 complete all as specified and directed.

Material and Labour for non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and Labour for Vitrified tiles 10mm thick (square/rectangular) light coloured, area of each tile not exceeding 0.36 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed of 20mm thick in CM 1:4 complete all as specified and as directed.

Material and labour for 20mm thick Granite (of any type) work (table rubbed and Roughed) in steps, jambs, pillars, window cills, cooking platforms and like over 20mm thick cement mortar 1:4 including pointing in white cement 1:2, using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 550X400mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc all as specified and as directed.

Supply and fix in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, and wastes, including bedding in cement mortar to drawf wal or including fixing cantiliver brackets and connecting union ot pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm all as specified and as directed.

Supply & Fixing Brass chromium plated bottle traps 32mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and as directed.

Supply and fix PVC connection 15 MM size with PTMT nuts of length 450 mm, complete all as specified and directed.

Supply and fix Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.

Supply and fix 15mm dia pillar tap, cast copper alloy, chromium plated, fancy type, with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe Make: model No.F1005101 of CERA or equivalent in Parryware/Hindware

Supply and fix Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

Supply and Fixing stop valves/angle cock, 15mm bore, fancy type, with long shank & cut concealed type chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix stop valves/angle cock, 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fix new Rotational moulded polyethylene water storage tanks having capacity 1000 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position including over flow and drain out pipe complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 40mm outer dia CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supply & Fix PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

Supply & Fix PVC (SWR) 75 mm dia of outlet, floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Supply and fix structural steel work in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS - 1161-1979 grade St.-240 all as specified and as directed.

Supply and fix mild steel tubular sections as in posts, struts posts, purlins etc including cutting tops to shape as directed, drilling holes, including all necessary welding, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fix mild plate(plain or chequerred), channel, square cut or notched(ordinary or counter sunk) forming holes with riveted, bolted or welded attachment to bottom of pipe conforming to Fe 410-W quality A(Gde-E-250) complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces over 10 cm wide or girth including preparation of surface etc., complete all as specified and directed.

Supply and fixing pre-colour coated high tensile strength corrugated galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.

Supply and Fix PVC (SWR) half pipes trapezoidal shape 150mm at top and 110mm at bottom single socketed, in any length with rubber ring joints, fixed as gutter complete all as specified and as directed.

Supply and fix PVC pipe (SWR) single socketed in any length with rubber ring joint 110mm dia fixed to wall complete all as specified and as directed.

Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and completely surrounding pipes after they are laid and tested for 110mm dia pipe and testedcomplete all as specified and as directed.

Note :- (i) Item No 48 to 60 shall be carried out at sea shore location where depth of sea water ranging from 0.45 m to 2.5 m. (ii) The unit rate quoted under these items are deemed to be inclusive of coffer dam or water retaining barricate, contiuous pumping out mecahnism to faciliated smooth working site.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

Removing /Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 2KM or under, beyond the 50 m initial lead included in the rates, including loading, transporting, unloading and stacking at the destination complete all as specified and as directed.

Use and waste of formwork to sides of pillars, post, struts, piers, coloumn and stanchions, square, rectangular or polygonal, fair finished surfaces of concrete all as specified and as directed.

Material and labour for Reinforced cement concrete M-30 design mix using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc all as specified and as directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams to rough finished surface of concrete for flat complete all as specified and as directed.

Material and labour for reinforced cement concrete design mix M-30 using 20 mm graded granite stone aggregate as in beams, cantilevers, lintel over 1.5M span all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.

Material and labour for RCC M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour for chequered cement concrete tiles 30cm x 30cm x 25mm with grey cement and pigment, hydraulically machine pressed, set, jointed and pointed in neat cement slurry to match colour of tiles, over and including 15mm thick screed in CM 1:4 in floors complete all as specified and as directed.

M & L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FR LS) upto and including working voltage 1100volts grade, drawn through and including non metallic rigid PVC conduit not less than 25mm drawn in concealed conduit in wall and open conduit on ceiling including all accessories ISI marked including factory made galvanised modular flush sheet metal enclosure having top bottom side and back wall knock out for conduit entry from any direction suitable to the approved make of switch/socket outlet conforming to IS 14772-2000 and suitable for for cover plates and unsheathed copper conductor stranded cable (FR LS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:- (a) one light point controlled by one switch 5 Amps

(b) One 3 pin socket outlet 5 Amps on Independent board

(c ) One 3 pin socket outlet 5 Amps on same board

All as per Item No. 62 above but with 4 sq mm PVC insulated copper conductor cable(FR) including 4 sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.

Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.

Supply and fix Modular switch, one way, 16Amps complete all as specified and directed.

Supply and Fix Modular switch Socket combination 6 A 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fix Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing remote control wall mounted fan 400mm sweep 3 blade, 1350rpm, 50Hz, 240 volt with air delivery of 65Cum/min, uniquely designed fan with square wire guard having air modes: standars, Natural, Breeze, Sleep mode with upto 8 hours timer operated remote controlled functions and soft touch digital type panel. Make: Havells model AINDRILA or equivalent in crompton Greaves/Usha/

Supply only LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells Cat part No. PLANO2X2PLR42WLED840S or equivalent in Philips/Bajaj/Surya.

Supply and fix single pole and neutral enclouser with a two pin and earth plug and socket complete with and including one MCB single pole 20 Amps complete all as specified and directed.

Supply,testing and commissioning water cooler electrically driven, stainless steel body, IEE raiting 3.5 min single phase with inbuilt purifier HIMA 7 NHC , dispencing capacity 125 Ltrs/hr and storage tank capacity 40 Ltrs normal, 40 Ltrs Cold, single phase 230 V AC power supply with all connecting accessories complete all as specified and as directed. Make: Best water cooler HIMA 7NHC ABS of Crossfields or equivalent in Voltas/Blue star/Godrej/Usha

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed input supply between 170 to 250V with output stabilizer supply at 230 V with accuracy ± 2.5% of capacity 15 Ampere all as specified and as directed. Make: VG 500 of V Guard or Equalent in Blue star/Voltas

Supply and fix MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed.

Supply and fix MCB SPN 40 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing Triple pole and neutral (TPN) 63 AMP 415V 10KA 'C' curve miniature circuit breaker (MCB) of triple pole and neutral 63 Amp current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. Make: Indo Asian/ L&T/Crompton Greaves/Havells

Supply and fix MCCB, 4 pole,415 volts thermal magnetic release, confirm to IEC 60947-II, F1 frame of rating 100 A, C curve 25 KA breaking capacity complete with all accessories all as specified and directed by Engineer-in Charge. Make: Indo Asian/ L&T/Crompton Greaves/Havells

Supply and fixing sheet metal enclosure VTPN with MCCB Incomer Distribution Board, IP 43 Loadline DBs are fitted with Bus Bars, Neutral Links, Blanking Plates (without MCCB) triple pole & neutral, double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP RCCB / RCBO / Isolator / MCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. Make: Indo Asian/ L&T/Crompton Greaves/Havells

Supply and fixing of Triple pole & neutral, double door, 8 way metallic modular distribution board confrming to IEC 61439-3, suitable for flush/surface mounting with provision for FP RCCB /RCBO /Isolator /MCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 Amps rated copper bus bar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet etc. having IK 09 & IP 43 protection complete all as specified and directed .

Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 12 way with 200 Amps rated copper bus bar double door protection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer Double door, flush to wall complete all as specified and directed .

Material and labour for sub main wiring with two runs of FRLS single core multistranded copper conductor 4 sqmm, PVC insulated and unsheathed drawn through and including suitable size PVC casing and caping with all accessories fixed to walls/ceiling including one run of 4 Sqmm copper (insulated) cable FRLS as earth continuity conductor including complete all as specified and as directed. Note : 3 runs of 4 Sqmm cable and one run of PVC casing and caping shall be measured one unit length.

Material and labour for Sub main wiring using two runs of single core PVC insulated cable (FRLS) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable size PVC casing and caping including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 6 sq mm PVC copper wire and One run of PVC casing caping shall be measured and paid as one unit.

Supply and lay cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of 4 core 25 Sqmm sizes fixed in wall/ roof or laying in trenches etc., complete all as specified and as directed. NOTE: Excavation, earth work shall be measured and paid for separately.

Dismantling/disconnecting/removal of Electric Incinerator with allied structure installed at CGDHQ-4 carefully from existing location after opening/disconnecting all electrical/mechanical connection from existing location incl opening of water pumps installed with incinerator and sifting the incinerator to new location as directed by Engineer-in-Charge. After shifting installation, testing and commissioning of electric incinerator incl necessary foundation as per OEM recommendation and connecting all electrical/mechanical connection complete to make the incinerator fully serviceable complete all as specified and directed.

Note for item No.85: - (i) Dismantling/disconnection shall be done carefully to avoid and damage to incinerator. Any damage minor/major during the dismantling/disconnection or during installation of incinerator shall be contractor responsibility and contractor shall repair the same without any extra cost. (ii) Foundation of the incinerator shall be provided as per OEM recommendation. Rate for the foundation shall be incl in the quoted rate. (iii) Necessary cable/wire, lugs, glands, tape, MCCB/MCB shall be included in the quoted rate.

Note for item No.85 (Contd.../-): - (iv) Laying of cable or wires, water pipe lines shall be as per MES standard or as directed by Engineer-in-Charge. It shall be measured and paid seperately (v) Any other accessoried required for the smooth functioning of incinerator shall be provided by the contractor and the same shall be deemed to be included in the rate quated by the tenderer. (vi) After shifting installation, testing and commissioning of electric incinerator shall be conducted to the entire satisfaction of GE and Engineer-in-charge, Testing and all the arrangements for the same shall be provided by the contractor and the same shall be deemed to be included in the rate quated by the contractor.

Supply and fixing 70W LED post top light using new generation technology in led to rejuvenate your outdoor areas with functionality during night and aesthetics during the day.Suitable for pole dia Ø 76 mm, IP65 die cast aluminium Post top lantern designed with long life led engine & electronic driver, designed for glare free symmetrical light distribution complete all as specified and as directed.

Supply and fixing 10W Landscape Lighting IP65 protection, die cast aluminium powder coated housing with PC driver, complete all as specified and as directed.

Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in hard/dense soil getting out complete all as specified and as directed.

Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

Supply,spreading and levelling clean dry sand in trenches all as specified for cable protection complete all as specified and as directed. Note: Punnned thickness shall be measured and paid.

Supply and lay unreinforced precast cable cover size 250X150X40 mm LV1 complete all as specified and as directed.

Schedule of Credit (Minus) Rs.2550.00 NOTE: Bidder shall insert credit amount of Rs. 2550.00 as rate in Green field under Col-13.

i and associates (BID ID -3082195)