Maint of internal Electrification in MdOTM Accn at certain building of Alma line Halfmoon line Mandir Line Fitz line S andT Area KV Area Butchery Area MH Area Records Area Jhula Devi Area DKT Area and GKHAL Area of Ranikhet under GE Ranikhet

Amount

BOQ( Sch 'A") B/R Portion Taking down carefully copper /aluminium point wiring (light,fan,socket or power ) complete fittings such as switches and fixtures ceiling roses, pendants, regulators, sockets, lamp holders, bracket light fittings, bulk heads fittings, tube light fittings etc removing the materials from site and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Supply and fixing of point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable (FRLS) drawn into and including medium grade PVC conduit ( ISI marked ) concealed (not less than 20 mm dia) all necessary fittings and accessories fixed concealed (including chase cutting in brick/stone masonery wall for fixing conduit and plastering the external surfaces and matching the same with existing suface) and sunk cast iron or pressed steel terminal boxes for mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No.2 above but One light point controlled by two way switch.

All as per item No.2 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.2 above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Supply & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core (multi-stranded) copper conductor cable ( FRLS) drawn into existing conduit and terminal boxes and matching the existing surface mounting fitting like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated Bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size copper conductor solid cable as in earth wire and connected to common earth dolly complete all as specified and directed, are as follows :- (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No.7 above but one light point controlled by Two way switch.

All as per item No.7 above but One socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.7 above but One socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No 7 herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm earth wire for socket outlet 6 pin 16 amps on independent board.

Suppy & Fixing point wiring for one light point / fan point / bell point (independent point), controlled by one, one way switch with 1.50 sqmm size PVC insulated unsheathed 1100 volts grade single core multi-stranded) copper conductor cable (FRLS) drawn into and including PVC casing -N-capping of suitable size with its all necessary fittings and accessories on wooden / stone / brick masonry wall surface and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated bakelite sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connected to common earth dolly complete all as specified and directed. (Note:- wiring shall be in done in colour coding as directed by Engoneer in charge )

All as per item No.12 above but one socket outlet 5 pin 5 amps controlled by one switch on same board.

All as per item No.12above but one socket outlet 5 pin 5 amps controlled by one switch on independent board.

All as per item No. 12 above but herein before but wiring with 2.5 sqmm copper wire (FRLS) PVC and 1.5 sqmm solidearth wire for socket outlet 6 pin 16 amps on independent board complete all as specified and directed.

Suppy & Fixing switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, Two way 6 Amp complete all as specified and directed.

Supply & Fixing socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing ceiling rose, PVC/ Poly carbonate, isolated body three terminal complete all as specified and directed.

Supply & Fixing lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing call bell ding dong AC, 230V single pole complete all as specified and directed,

Supply & Fixing bell push piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fix High quility LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.

Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.

Supply & Fixing in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing in repair MCB doubble pole ,, 240 volts, 16 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing in repair MCB Four pole ,415 volts, 40 to 100 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & Fixing in repair sheet metal enclosure for DBs (double door type) single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing in repair sheet metal enclosure for DBs (double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed .

Supply & Fixing in repair sheet metal enclosure for DBs (double door type) Triple pole and neutral 4 way including blacking platge as required with 200 Amps rated bus bar, 415 volts fixed complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, , 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 4 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multi stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, , 25 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoted rates. 2. Two run of 6 sqmm, one run of 6 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

Taking out old unserviceable service connection cable for replacement including Supply & Fixing service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed.

Supply and fix High quility LED lighting fixture mirror type with high output diffuser 2 feet 1x 10 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre wired of 1.5 sqmm three core flexible cable complete all as specified & directed.

Supply and fixing high quality indoor LED PLL base lamp 4 pin, 18 Watt (with inbuiled driver) complete all as specified and directed.

Supply & Fixing Exhaust fan plastic body heavy duty ISI mark, 250 mm size with louvers including all connecting accessories including, cutting, opening through bricks/ stone wall for fixing in openings , grounting of suitable size of nuts & bolts for exhaust fan and making good distrubed surface , connecting flexible cable wire from ceiling rose to exhaust fan complete all as specified and directed .

Taking down for Repair of Exhaust fan of size 250 mm to 450 mm sweep of any type including replacement of burned copper winding, bearing and any other accessories and refixing after repair with suitable size nut bolts and wire complete all as specified and directed.

Supply and fix in replacement High quality LED T8 tube rod 20 Watt white/ warm white (with inbuild driver) with single side connection including connection with wire of 1.5 sqmm twin twisted flexible cable complete all as specified & directed.

Supply and Fixing Plug top 16 Amp 3 Pin complete all as specified and directed.

Supply and Fixing in repair switch piano flush type single pole, one way 5 Amp complete all as specified and directed.

Supply & Fixing in repair socket out let multi 5 pin, 5 Amps, flush type complete all as specified and directed.

Supply & Fixing in repair switch piano flush type single pole, one way 15 Amp complete all as specified and directed.

Supply & Fixing in repair socket out let 2 in1,3 pin, 5 and 15 Amp, flush type complete all as specified and directed.

Supply & Fixing in repair lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply & Fixing Modular switch 1 way 6 Amp, 1 module complete all as specified and directed.

Supply & Fixing Modular switch 1 way 16 Amp, 1 module complete all as specified and directed.

Supply & Fixing Modular socket outlet 6Amp, 2/3 pin combined 2 module complete all as specified and directed.

Supply & Fixing Modular socket outlet 6/16Amp, 2/3 pin combined 2 module complete all as specified and directed.

S & F Recess mounting LED 300x300 mm luminaire,18 W, 230v, suitable for Recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F Recess mounting LED luminaire 600mm x 600 mm ,36 W, 220v, with high efficiency PMMA diffuser soft glare free light suitable for recessed mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F in replacement bldg security light luminaires of 25 watt LED suitable for 220-230 V, 50 Hz with IP 65 protection including bracket for fixing fitting made of 32mm bore light grade GI pipe connecting up with three core twisted flexible copper conductor cable complete all as specified and directed.

S & F LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser complete with all accessories and including LED light driver holder connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed.

S&F, Wall Aluminium Brackets with cast aluminium polyurethane paint (with prior treatments) with nipple having 12mm holder threads, length 135 mm and base half round of 70 mm with brass gallery ,brass holder and glass with 3 watt LED bulb suitable for bed side lamps including all fittings for wall mounting and LED bulb 3 W as per Cat. Part No.AL-135 of make Mepro Electrical or equavalient make as apporoved by GEcomplete all as specified and directed

Supply and fixing of LED Post top 30W with IP 65 protection comprises of Spherical/Diamond shape diffuser cover, etc and all accessories including monkey cage of suitable size for protection of light, light grade GI pipe of suitable length and wire required for connections etc complete all as directed. Make : C&S cat part No CETUS/30W, Philips cat part No SPC TrueForce Post, Crompton cat part No LPTM-40-CDL, Havells cat part No RUBYPT35WLED757PSYMTOPC

Supply and fixing in repair LED Bollard light suitable for 20-30 watt LED Bulb (with 20-30 W LED Bulb) including B-22 brass holder provided with aluminium cover, Fully cast aluminum body finished with polyurethane paint(with prior treatment) bollard of length 584 mm (23 inches) & Hexagonal base dia of 279 mm (11 inches) and max dia of leg of bollard 133 mm (5.25 inches) surmounted with fully cast aluminum body finished with PU paint with acrylic window cover,IP 65/66 protection complete. all as specified and directed of Make: Mapro Cat part No: MBL-T-280 Note:- Fixing of bollard light shall be on 1'X1'X0.6' size pcc with suitable size nut and bolts in quoted rates and no extra payments will be made on account of this.

Taking out old U/S Sub main wiring for replacement including S&F sub main wiring with two single core FRLS PVC insulated and sheathed 1100 Volts grade, 2.5 Sqmm size cables, PVC insulated stranded copper conductor fixed in PVC conduite pipe 25mm dia with all accessories and one continuous run of 2.5 Sqmm copper conductor PVC (Note :- Two single core cables along with earth wire and conduit shall be measured as one unit length).

S & F in repair Surface mounting LED 300x300 mm luminaire,15 W, 230v, suitable for surface mounting ,with powder coated CRCA housing with LEDs, flat panel for surface mounting which provides soft light and glare free symmetrical illumination complete with driver and all accessories internally pre-wired and including necessary fixing as required on surface and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- PLUTOSURFACE1X1PLS15WLED857S or or equavalient make as specified in particular specification apporoved by GE

S & F in repair Surface mounting LED 600x600 mm luminaire,34 W, 230v, suitable for surface mounting ,with powder coated CRCA housing with LEDs, flat panel for surface mounting which provides soft light and glare free symmetrical illumination complete with driver and all accessories internally pre-wired and including necessary fixing as required on surface and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- PLUTOSURFACE2X2PLS34WLED857S equavalient make as specified in particular specification

S & F in repair Surface suspended LED Circular luminaire,25 W, 230v, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre-wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- TORUS600RDP/S25WLED857SPMMAWH equavalient make as specified in particular specification apporoved by GE

S & F in repair Surface suspended LED Circular luminaire,25 W, 230v, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface suspended luminaires with annular shape and opal diffuser complete with driver and all accessories internally pre-wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- MONDO400RDP/S25WLED857SPSWH equavalient make as specified in particular specification apporoved by GE

Supply and fixing of LED Post top suitable for 30W to 50W comprises of Spherical/Diamond shape diffuser cover fully cast aluminium body finished with polyurethane paint (with prior treatment) with acrylic window cover and B22 Brass holder etc and all accessories including LED bulb of 30-50 W, monkey cage of suitable size if required for protection of light, light grade GI pipe of suitable length and wire required for connections etc complete all as directed. Make : MEPRO cat part No PTL-0002 equavalient make as specified in particular specification

Supply and fixing of LED Post top suitable for 30W to 50W comprises of Spherical/Diamond shape diffuser cover fully cast aluminium body finished with polyurethane paint (with prior treatment) with acrylic window cover and B22 Brass holder etc and all accessories including LED bulb of 30-50 W, monkey cage of suitable size if required for protection of light, light grade GI pipe of suitable length and wire required for connections etc complete all as directed. Make : MEPRO cat part No PTL-0002 equavalient make as specified in particular specification apporoved by GE

Material & Labour for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed. Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost..

sheetal engineering

kumar automobiles

M/s RN Kharwar & Sons

aditya construction