REPAIR TO VARIOUS TYPES OF DOORS, WINDOWS, VENTILATORS, CUPBOARDS AND OTHER JOINERY RELATED BR WORKS AT ZONE-I UNDER AGE (I) LANSDOWNE

Amount

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq.m each complete all as specified and directed.

Taking down chowkhats or frames of any description with shutters (without taking off shutter from the frames) exe 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , n exc 1.00 Sqm complete all as specified and directed.

Refixing of shutters in same opening of any descrption after easing and adjusting , exc 1.00 Sqm but n exc 2.00 Sqm complete all as specified and directed.

Taking down shutters of any description n. exc 1.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

M&L for 35mm thick, factory made, plain framed, pannelled shutters (Two panel) with lock rail and style of 2nd class hard wood and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces with 2nd class hard wood moulded bead shall be provided and planted round the panels for one side. The size of rail and stile as per IS : 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed

S & F for FRP door frame : fibre glass reinforced plastic (FRP) Door frames shall be three lagged of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame. Complete all as specified and directed. Make - M/s Ashwini and Sons Murad nagar, TATA FRP Doors Mumbai, AGEWS Ahemdabad Gujarat, Ashish Industries Ghaziabad

S & F for FRP paneled door shutter FDR Door shutter shall be 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer. Made with fire retardant grade unsaturated polyester resin moulded to 3mm thick FRP laminat for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels. complete all as specified and directed : Make - M/s Ashwini and Sons Murad nagar, TATA FRP Doors Mumbai, AGEWS Ahemdabad Gujarat, Ashish Industries Ghaziabad.

S & F for 2nd class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze & wire mesh etc. (with sash bars), edges of framing and sash bar moulded, fitted with cut and mitred moulded beads for securing glass/gauze,etc, size of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed

S&F for 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side with teak wood lipping on edges of shutter, one face is covered with 0.90 mm thick decorative laminate with lipping / frame to match complete all as specified and directed.

M&L for Plain Solid, straight chowkats and frames of second class hard wood (suitable for joiner’s and carpenter’s work), wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F for Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed.

S & F for Butt hinges, 75 mm long medium weight, cold rolled mild steel, ISI marked complete all as specified and directed.

S & F for 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S & F for 250mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed.

S & F for 200mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S & F for 150mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and directed.

S & F for Aluminium handles cast type anodised of size 150mm long ISI marked complete all as specified and directed.

S & F for Aluminium handles cast type anodised of size 125 mm long ISI marked complete all as specified and directed.

S & F for 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc complete all as specified and directed.

Material & labour for Rendering 10 mm thick CM 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M & L for Rendering 15 mm thick in two coats i.e. 10mm thick in CM 1:6 and 5mm thick in CM 1:4 using water proofing liquid compound as per manufacturer's instructions on other than fair faces brick or concrete surfaces and finishing surfaces even & smooth without using extra cement complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately.

M&L for Preparation of new plastered or unplastered surfaces of walls and applying two coat of distemper oil emulision (O.B.D) white or tinted over and incl of one coat of primer on wall surface complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F for 18/19 mm thick pre-laminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in Cup Board shutters complete all as specified and directed.

S & F for 75 mm hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw complete all as specified and directed

S&F in repairs Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 30 mm

S&F for Aluminium handles,cast type, anodised 100 mm long, complete all as specified and directed.

S&F in repairs Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F for Stainless steel wire cloth of size 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor over all length of cover plate 150 mm complete all as specified and directed.

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in as complete all as specified and directed by Engr-in-charge

S&F in repairs Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F for 25mm dia curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed

S&F for fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones glazed with oil putty fixed with beads or in wooden shutters complete all as specified and as directed.

S&F for 04 mm thick glass sheet , ordinary quality and glazing with oil putty/wooden beads not exceeding 0.5 square metre in each pane complete all as specified.

S&F in welding work in windows ventilators incl providing handle, hinges etc wherver required with easing hinges, handles and making smooth for working complete all as specified and directed.

S&F in reapir door closer hydraulically regulated, designation No 1, universal type, aluminium (Die cast body) sutable for door shutters complete all as specified and directed

M&L for Painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified.

M&L for preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified

M&L for mild steel angle iron as in framed chowkats for door shutters cut to length including necessary welding and making holes for fixing butt hinges and fixing 10 mm dia as tle bar complete confirming to Fe-410 -O etc complete all as specified and directed.

Supply & Fixing for mild steel flat iron as in hold fast,wind ties over roof covering using steel of grade Fe-310-O or Fe-410-O including necessary drilling holes etc and similar works complete all as specified.

S&F for steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.

S&F for steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc all complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in bed block for insertion of hold fast incl necessary form work etc complete all as specified and directed.

S&F for Aluminium door seal upto 1200 mm long on bottom of door, fixed in repairs complete all as specified and directed.

S&F for Magic eye for main door , fixed in repairs, complete all as specified and directed. by Engr-in-Charge

M/S Balaji Builders