Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.0 LAccepted-AOC | ₹24.0 L | L1 | Accepted-AOC Being Lowest |
| 2 | L2₹26.2 LRejected-Finance | ₹26.2 L | L2 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | BAL SINGH AND SONS L2 | JAY TEE KAY INFRA L1 |
|---|---|---|---|---|---|
| 1.00 | Material and labour laying and connected 150mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per Table 400-13 of MoRTH specifications for road and bridge works 2013 manufactured in MWW Plant, material comprising of clean, crushed, graded aggregated and granule material premixed with water to a densel mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MORTH specifications for Road and Bridge works 2013 complete all as specified and directed. | 90 | TEN SQUARE METRE | 2,850 ₹2.6 L | 3,000 ₹2.7 L |
| 2.00 | Material and labour for preparation of unsurfaced Wet mix macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a tack coat of cationic bitumen emulsion RS1 confirming to IS:8887 at a rate of application of 7.5 Kg per 10 Sqm on bituminous surfaces as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and as directed. | 90 | TEN SQUARE METRE | 550 ₹49,500 | 400 ₹36,000 |
| 3.00 | Material and labour for premixed, bituminous macadam using 4% binder content of paving bitumen of grade VG-30, by weight of total mix, confirming to Clause 504 of MORT&H specifications, mix prepared in batch type hot mix plant of 100-120 TPH capacity transported to site by tippers or trucks, laid over prepared surfaces using full width mechanical sensor paver with string sensor (consolidated thickness not exceeding 75 mm) rolled and compacted with 8 to 12 tonne power road roller to required gradient and camber including running expense of all plants and machines, including necassary hand packing and pinning to give an even surface and quality control tests as required as per MORT&H specifications and specified in tender documents complete all as specified and directed.
Note: (i) The quoted rate shall deem to include for preparation of level sheets by contractor before laying DAC over BM as directed at site. (ii) A recovery @ Rs 54.00 per kg shall be made if the bitumen content in design mix is found on lower side but no adjustment shall be made if the bitumen content is found on higher side than specified. | 75 | CUBIC METRE | 6,200 ₹4.7 L | 6,000 ₹4.5 L |
| 4.00 | Material and labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a tack coat of cationic bitumen emulsion RS1 confirming to IS:8887 at a rate of application of 2.5 Kg per 10 Sqm on bituminous surfaces as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and as directed. | 340 | TEN SQUARE METRE | 330 ₹1.1 L | 300 ₹1.0 L |
| 5.00 | Material and labour for Bituminious premix dense asphaltic concrete 40mm thick (consolidated thickness), pre-mixed, hot mix, with coarse aggregate of grading 2 as per MORT&H specification clause 507, in single layer using paving bitumen (grade VG-30) @ 6% by weight of the total mix as per design mix including supply and mixing of anti stripping agent, warm mix additives (quality,quantity and grade as per approved job mix formula), cleaning and preheating of the mineral aggregate, filler & bitumen to the specific temperature and thoroughly mixing with binder of specified bitumen content and other materials as specified as per mix design in batch type hot mix plant of capacity 100-120 TPH, carrying the hot mixed material by means of tippers, trucks or other approved arrangements, laying the hot premixed material over the prepared surfaces using full width mechanical sensor paver with string sensor rolled and compacted to required gradient and camberand compacted with 8 to12 tonne power vibratory road roller including running expense of all plants and machines, including necassary hand packing and pinning to give an even surface and quality control tests as required as per MORT&H specifications and specified in tender documents, including taking down of existing cat eyes and refixing of cat eyes after laying premix complete all as specified and directed.
Note- (i) Bituminous premix dense asphaltic concrete shall prepared in central computerised batch type hot mix plant. complete all as specified and as directed. (ii) Design mix shall be got done by the contractor at his own expenses from laboratory as decided by GE, before laying the DAC. (iii) A recovery @ Rs 54.00 per kg shall be made if the bitumen content in design mix is found on lower side but no adjustment shall be made if the bitumen content is found on higher side than specified. | 430 | TEN SQUARE METRE | 3,560 ₹15.3 L | 3,200 ₹13.8 L |
| 6.00 | Material and labour for preparation of existing black top surfaces, removing dust, dirt, grease & other foreign matters etc. to receive the marking and applying hot applied thermoplastic road marking paint (white/yellow) conforming to BS-3262-1989 inclusive type I reflectorising glass beads as per table 800-3, 800-4 of MORT&H applied in uniform thickness of at least 2.5mm and wide and spread uniformly with reflectorising glass beads type I & II as per Clause 803.4.3 of MORT&H specifications with a road marking machine as per IRC: 35 ,with traffic diversion arrangements if required, complete as per MORT&H specification clause 803.4, complete all as specified and directed. Note: The road marking machine shall be approved by GE. | 200 | SQUARE METRE | 430 ₹86,000 | 400 ₹80,000 |
| 7.00 | Material and labour for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. | 6.75 | CUBIC METRE | 6,200 ₹41,850 | 6,000 ₹40,500 |
| 8.00 | Bringing excavated earth from outside MoD land and depositing where directed for filling purpose under item No.9 here-in-after complete all as specified and directed.
Note: Cost of earth deemed to be included in quoted rate. | 135 | CUBIC METRE | 80 ₹10,800 | 300 ₹40,500 |
| 9.00 | Material and labour for forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed. | 135 | CUBIC METRE | 530 ₹71,550 | 50 ₹6,750 |
Updated dates
Tender Value
₹29.1 L
EMD Value
₹59,000
Closing Date
9 May 2026, 6:00 pmClosed
CWE Ambala
Headquarter Commander Works Engineer Ambala Mansfield Road Ambala Cantt
CA NO CWE/AMB/NORTH-91 OF 2025-26 SPECIAL REPAIR TO ROAD FROM KHARGA CANTEEN TO ANAND NAGAR UNDER GE(NORTH) AMBALA CANTT
2026_MES_759372_1
CWE/AMB/NORTH-91 OF 2025-26
Open Tender
Civil Works - Roads
120 days
Ambala Cantt
As per tender documents
9 documents required · 9 mandatory
₹500
Yes
GE(North) Ambala
₹59,000
Yes
16 Jun 2026
9 Apr 2026
11 May 2026
9 Apr 2026
9 May 2026
27 Apr 2026
9 Apr 2026 - 25 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
Material and labour laying and connected 150mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per Table 400-13 of MoRTH specifications for road and bridge works 2013 manufactured in MWW Plant, material comprising of clean, crushed, graded aggregated and granule material premixed with water to a densel mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MORTH specifications for Road and Bridge works 2013 complete all as specified and directed. | - | TEN SQUARE METRE | - | - | |
Material and labour for preparation of unsurfaced Wet mix macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt etc and applying evenly a tack coat of cationic bitumen emulsion RS1 confirming to IS:8887 at a rate of application of 7.5 Kg per 10 Sqm on bituminous surfaces as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and as directed. | - | TEN SQUARE METRE | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
TenderN91.pdf
Tender Documents • 0.50 MB
BOQ_850960.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid