Building

NAME OF WORK : NEW CONSTRUCTION OF VACCINE STORE AT NAROL LAPROSY CAMPUS AHMEDABAD

Qty Item of Work In Rupees Unit Amount In Words

Clearing and grubbing road land including up rooting rank vegetation grass Rupees TwentyEight

bushes, shrubs, sapling and trees girth upto 300mm removal of stumps of trees Thousand Three Hundred

1 0.36 cut earlier and disposal of unserviceable materials ( C ) By mechanical means in 28,393.04 Hec.

NinetyThree Paise Four

area of light jungle Only

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J

or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer Rupees Seven Hundred

2 1004.43 or G.I. limpet washer. filled with white lead complete excluding the cost of 727.13 Sqm TwentySeven Paise

purlins, Rafters and Trusses.(1) 0.80 mm thick sheet. Thirteen Only

Excavation for foundation up to 1.5 m depth including sorting out and stacking

of useful materials including shoring, shuttering (if required) and disposing off Rupees One Hundred

3 2252.12 the excavated stuff up to all lead and lift. A) Loose or soft soil 117.08 Cum Seventeen Paise Eight

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

Rupees One Hundred

out and stacking of useful materials (if Required) and disposing off the

4 1425.95 129.81 Cum TwentyNine Paise

excavated stuff upto all lead and lift. (A) Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out Rupees One Hundred

5 1310.72 and stacking of useful materials and disposing off the excavated stuff upto 50 142.52 Cum FourtyTwo Paise FiftyTwo

Meter lead.(A) Loose or soft soil Only

Extra for additional depth more than 5.0 m for excavation for foundation

Rupees TwentyOne Paise

6 1310.72 including sorting out and stacking of useful materials and disposing of the 21.12 Cum

excavated stuff upto 50 m lead.(A) Loose or soft soil

Filling available excavated earth (excluding rock) in trenches. plinth, sides of Rupees One Hundred

7 4779.64 foundations etc. In layers not exceeding 20 cm. in depth consolidating each 130.39 Cum Thirty Paise ThirtyNine

disposited layer by ramming and watering. Only

Filling in plinth with sand under floors including watering ramming,

Rupees Four Hundred

8 262.34 consolidating and dressing complete 460.19 Cum

Sixty Paise Nineteen Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

Rupees Two Hundred

9 918.18 thickness including watering, ramming and consolidating etc. complete. 289.06 Cum

EightyNine Paise Six Only

Qty Item of Work In Rupees Unit Amount In Words

Box Cutting the road surface to proper slope and camber for making a base for Rupees One Hundred

10 697.37 road work including removing the excavated stuff and depositing on the road 102.93 Cum Two Paise NinetyThree

side slope as directed upto 50Mt.lead. Only

Spreading the stone aggregate for rolling and W.B.M. including filling the Rupees Two Hundred

11 232.46 interstices to required camber and gradient (excluding spreading of 249.75 Cum FourtyNine Paise

Blindage)(ii) 40mm to 63mm size aggreagates (H.B.) SeventyFive Only

Spreading blindage or road crust filling the gaps in metal and leveling to Rupees One Hundred

12 116.23 camber and gradient as directed.(i) Murrum 147.47 Cum FourtySeven Paise

FourtySeven Only

Rolling and consolidating water bound macadam (except laterite and Kankar)

including watering not exceeding 150mm thickness (Main layer including

13 174.34 binding materials ) including filling in depressions which occur during the 21.00 Cum Rupees TwentyOne Only

process.(A) With power roller exceeding 8 tonne and not exceeding 12 tonne.

Applying general insecticide pest control treatment to floors, cupboards etc

including labour materials etc. complete. Using Imidacloprid 30.5 SCas Per IS

Rupees EightyNine Paise

14 1192.44 6313 part -II( (0.075% concentration by mass) is recommended 10.5ml 89.28 Sqm

TwentyEight Only

chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of

surface is recommended as per I.S.

P.C.C. : Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

Rupees Three Thousand

: 4- graded stone aggregates 20 mm nominal size) and curing complete

15 613.99 3,945.63 Cum Nine Hundred FourtyFive

including cost of formwork in (A) Foundation and Plinth

Paise SixtyThree Only

Providing and laying controlled cement concrete M-25 with all lead from plant

site including all other taxes, octroi, transportation, pumping, pouring,curing,

vibrating of concrete etc complete including the cost of formwork but Rupees Six Thousand

16 2355.12 excluding the cost of reinforcement for reinforced concrete work in M-25 all 6,318.19 Cum Three Hundred Eighteen

RCC elements like foundation, @ slabs, beams, plinth beams,chhajja, Paise Nineteen Only

Lintel,Footing and stair cases etc at all floor level from below plinth and above

Providing and laying controlled cement concrete M300 with all lead from plant

site including all other taxes, octroi, transportation, pumping, pouring,curing, Rupees Six Thousand

vibrating of concrete etc complete including the cost of formwork but Three Hundred

17 641.31 excluding the cost of reinforcement for reinforced concrete work in M300 all 6,395.38 Cum

NinetyFive Paise

RCC elements like columns, walls, etc at all floor level from below plinth and ThirtyEight Only

above plinth level.

Qty Item of Work In Rupees Unit Amount In Words

GRADE SLAB : Providing and laying controlled cement concrete M.200

Concrete with all lead, including all transportation, pumping, pouring, curing of Rupees Four Thousand

18 240.24 concrete etc complete including the cost of formwork but excluding the cost of 4,262.88 Cum Two Hundred SixtyTwo

reinforcement for reinforced concrete work in M200 Grade Slab Paise EightyEight Only

TRIMIX ROAD : Providing & Laying 15.0 cm thick M200 grade controlled

cement concrete without fly ash trimix usinng P21(water reducing concrete

admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm per bag of

cement including making C channel 75 x 75 mm required to maintain

level,slope and thickness of the concrete road leveling of placed concrete with

surface vibrator and finishing with power floater & trowel light brooming the Rupees Six Thousand Five

19 285.76 surface & including Construction joints to be formed at every 5 mt distance by 6,582.45 Cum Hundred EightyTwo Paise

grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be FourtyFive Only

made of 5 mm width and depth min (1/3 rd depth of the pavement) as shown

in the drawing and shall be filled with ready to use PU sealant of UV

gradecutting & filling of expansion joint as directed by Engineer in charge.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, Rupees SeventySix Paise

binding and placing in position complete. All level TwentyOne Only

Brick work using common burnt clay building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation, plinth and superstructure in Cement Rupees Four Thousand

21 46.72 Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional, For all floor 4,295.99 Cum Two Hundred NinetyFive

Paise NinetyNine Only

Autoclave aerated concrete (AAC) blocks : Masonary work using Aerated light

Rupees Four Thousand

weight concrete block having crushing strength not less than 35 kg/sqcm for

22 1652.52 super structure above plinth level upto floor two level in cement mortar 1:5 ( 1 4,528.57 Cum

TwentyEight Paise

cement : 5 fine sand ) complete as per Technical Specification

FiftySeven Only

Providing 10mm.Thick cement plaster in single coat on ceiling and sofit for

plastering upto any level finished even and smooth in [I]Cement mortar 1:3 (1 Rupees One Hundred

23 6681.30 cement : 3 fine sand) Work complete including all type of scaffolding , tools, 153.67 Sqm FiftyThree Paise

tackles etc complete. (For all floor) SixtySeven Only

Qty Item of Work In Rupees Unit Amount In Words

Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement

Rupees Two Hundred

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

24 4192.91 272.48 Sqm SeventyTwo Paise

mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished

FourtyEight Only

with trovel including scaffolding curing etc. complete. (At all floor)

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished Rupees One Hundred

25 8722.18 even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) Work complete 138.71 Sqm ThirtyEight Paise

including all type of scaffolding , tools, tackles etc complete. SeventyOne Only

Providing and applying external finish of average 2 to 2.5mm thick acrylic

polymer based texture and pattern with standard tool and applicator as

specified by manufacturer on exterior surfaces at all heights including

scaffolding to give even shades including thoroughly brushing the surfaces free

from mortar droping and other foreign matter and sand paper smoothed etc. Rupees Three Hundred

26 4192.91 complete as per the manufacture specifications and up to the satisfaction of 325.22 Sqm TwentyFive Paise

Engineer in-charge/ Architect. The rate includes making of grooves, pattas and TwentyTwo Only

finishing as directed by Architect/ EIC. Paint shall be measured and paid in

seperate tender item. (Item should be executed by approved applicator only.)

Providing and fixing G.I. hexagonal chickenmesh of size 16 x24 of 22 gauge at

junction of concrete and brick work or between different materials after

making "V" grove between two different material surface and filled with rich

cement mortar and @ 100mm on each side of surfaces including necessary Rupees Two Hundred

27 872.22 "U" nails / screws / washers with cleats for fixing, overlaps, scaffolding at all 232.79 Sqm ThirtyTwo Paise

floors / all levels / all heights / all shapes etc. complete as per drawing / SeventyNine Only

specifications and direction of Engineer-in-charge. For civil, plumbing, electrical

& infrastructure works.

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm

Rupees One Thousand

/ 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm.

28 144.17 1,441.22 Sqm Four Hundred FourtyOne

thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white

Paise TwentyTwo Only

Qty Item of Work In Rupees Unit Amount In Words

Vitrified Flooring (600x600mm) : Providing and laying Lapato /

Glossy/Matt/Rustic finish Vitrified tiles flooring using minimum 10 mm thick

tiles as per approved make list or selected by Architect , tile size (600 x

600mm,) including preparing base for leveling with 20mm thick cement

Rupees Two Thousand

mortar 1:6 (1 cement : 6 coarse sand ) and jointed with 3mm thick laticrete

29 547.70 2,420.16 Sqm Four Hundred Twenty

grouting of approved shade and colour in proper line and level as per detailed

Paise Sixteen Only

drawing / instruction and approval by architect.The rate shall be inclusive of

protecting the flooring by plaster of Paris and plastic and/or bubble top sheets.

Basic rate of tile is Rs. 120/Sqft.( At all floor area)

Tac Tiles : Providing & laying Tac tile 300mm x 300mmx 15mm flooring. The

tile laid using with adhesive as per site condition including all labour and Rupees Eight Hundred

30 109.54 material, cleaning, curing, etc., complete all As per drawings and design 876.93 Sqm SeventySix Paise

supplied by architect and instruction given by authority and E.I.C. NinetyThree Only

Water proof plaster : Providing 15 mm thick water proof cement plaster in

single coat on brick/ block masonry or RCC wall, at all heights, finished even

and smooth in CM 1:3 (1 cement : 3 sand) including providing and mixing water Rupees One Hundred

31 110.88 proofing materials of approved make in recommended proportions by 184.95 Sqm EightyFour Paise

manufacturer and as directed by Engineer-in-charge and finishing the surface NinetyFive Only

wired finish to receive the tiles/ smooth finish with a floating coat of neat

cement slurry at 2.75 Kg/ sqm etc. complete at floor

Providing and laying six courses water proofing treatment with bitumen felt

over roofs consisting of first, third and fifth course of blown bitumen 85/25 or

90/15 conforming to IS : 702 applied hot @ 1.45, 1.20 and 1.45 Kg per square

metre of area respectively, second and fourth courses of roofing felt type 3 Rupees Seven Hundred

32 1254.95 grade I conforming to IS : 1322 (Hessian based self finished bitumen felt) , sixth 789.82 Sqm EightyNine Paise

and final course of stone grit 6 mm and down size or pea sized gravel spread at EightyTwo Only

6 cubic decimeter per sqm including preparation of surface but excluding

grading, complete.

Providing and laying broken chine mosaic flooring for terrace using 12 mm to

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

Rupees Seven Hundred

or slope and to be tempered to bring mortar creme out upto surface using

33 1254.95 747.29 Sqm FourtySeven Paise

white cement including rounding off junctions and extending them upto 15 cm

TwentyNine Only

along the wall,clearing with water and oxalic acid etc. as directed.

Qty Item of Work In Rupees Unit Amount In Words

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1- Rupees Nine Hundred

34 5050.55 Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry 992.66 Sqm NinetyTwo Paise SixtySix

mixed with pigment to match the shade of slab including rubbing and polishing Only

etc. complete. (A) 25mm thick

As per above specification all work shall be done. For different kind of finishing Rupees One Thousand

35 5050.55 like lapato/leather/thread or as per Architect sugestion. (Kota Stone) 1,013.99 Sqm Thirteen Paise NinetyNine

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1- Rupees One Thousand

36 73.22 Cement : 3 coarse sand) and jointed with gray cement slury mixed with 1,187.79 Sqm One Hundred EightySeven

pigment to match the shade of slab including rubbing and polishing etc. Paise SeventyNine Only

Providing and laying Granite slab (16 to 18 mm thick) one side polished Rupees Two Thousand

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement : 6 coarse Three Hundred

sand) or L.M. 1:1.5 laid and jointed with grey cement slurry including rubbing & TwentySeven Paise Fourty

polishing complete, for all floors. Only

Providing and laying 16 to18 mm thick polished Granite stone slab machine

cut in single piece in risers of steps, dedo, pillar, sill and jambs or dedo laid on

10 mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) laid over and

jointed withgrey cement slurry incl. rubbing and polishing etc complete. The Rupees Two Thousand

38 215.27 rate includes lodding, unlodding, scaffolding, wastage, making hole, cutting/ 2,522.53 Sqm Five Hundred TwentyTwo

chasing, rounding champhering, edge polishing of edges. The work shall be Paise FiftyThree Only

carried out as per the approval of architect and engineer-in-charge. for all floors

Granite Platform (Basin & Sink Counter, Width up to 750mm) : Providing and

constructing approved shade and sample of Mirror finish granite platform

+750mm width 25 mm thick Machine polished kotah stone as vertical supports

at sides,including cutting granite & kotah as per required shape , dedo 1'6" ht & Rupees Four Thousand

size to fit kitchen sink, moulding, tiles adhesive nosing, chamfered front edges, Five Hundred

39 68.61 fixing, disposal of debris etc complete with all labour and materials and as per 4,597.14 Rmt

NinetySeven Paise

detailed drawings / architects instruction and approval by Engineer-in- Fourteen Only

charge. The sample mock shall be approved from Employer's representative/

Employer. at All Floor Level

Qty Item of Work In Rupees Unit Amount In Words

BELOW STORAGE 600DX800 H: Providing, making, fixing as per detail drawing

made from 19 mm IS 710 BWP ply structure and first class indian teak wood

frame, both side 1 mm thick laminate finish shall be of approved make & shade

and as per the detail drawing. All the edges of ply shall be covered with 1 mm

thick laminate finish Rate shall also inclusive of all necessary brass satin finish

nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm

tower bolts, ball catches/Magnet, The rate shall be inclusive of shelf both side

1 mm thick laminatefinish and as per detail drawer unit with SS 304 grade

kitchen basket as per selction by architect The rate shall be in sqm of elevation

Rupees Five Thousand

area for all floors and at all heights including all costs complete as per the

40 2.40 5,019.62 Sqm Nineteen Paise SixtyTwo

Architectural drawings & instructions.Only the elevation area of the storage

unit will be measured and paid for. Item for 1 mm thick laminate fixing and

polishing is included in this item. The work shall be measured & paid in sqm

The rates shall be inclusive of all wastages, material, labor, taxes,

transportation, loading, unloading, fixing in position, etc. complete to the

satisfaction of the Architect and EIC. The mock-up of 1 unit shall be approved

from EIC and Architecture prior to the final production. ( at all floor)

Qty Item of Work In Rupees Unit Amount In Words

ABOVE STORAGE 600DX800 H: Providing, making, fixing as per detail drawing

made from 19 mm IS 710 BWP ply structure and first class indian teak wood

frame, both side 1 mm thick laminate finish shall be of approved make & shade

and as per the detail drawing. All the edges of ply shall be covered with 1 mm

thick laminate finish Rate shall also inclusive of all necessary brass satin finish

nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm

tower bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for

all floors and at all heights including all costs complete as per the Architectural

drawings & instructions.Only the elevation area of the storage unit will be

measured and paid for. Item for 1 mm thick laminate fixing and polishing is

included in this item. Approval of all loose material (sample of materials to be Rupees Ten Thousand

41 2.40 used) & raw manufacturing to be got approved in advance from EIC & 10,766.99 Sqm Seven Hundred SixtySix

Architect prior to the final production of the work. Manufacturing shall in parts Paise NinetyNine Only

or as whole as per the requirements & or assembled at site as per the

requirement and directed by EIC & Architect. All material to be used shall be

as per the drawings & confirm to the relevant detailed material specifications

of this document. The work shall be measured & paid in sqm The rates shall

be inclusive of all wastages, material, labor, taxes, transportation, loading,

unloading, fixing in position, etc. complete to the satisfaction of the Architect

and EIC. The mock-up of 1 unit shall be approved from EIC and Architecture

prior to the final production. ( at all floor)

Qty Item of Work In Rupees Unit Amount In Words

False ceiling : Providing and fixing eco-friendly light weight calcium silicate

false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the

Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal conductivity0.043° w/m KC.for the

best thermal Insulation . The Light weight calcium Silicate tile shall be of

approved texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 &

Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be

laid on true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both side)

consisting of main ‘T’ runner suitably spaced at joints to get required length

and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm

centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm Rupees One Thousand Six

42 709.73 (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm 1,648.96 Sqm Hundred FourtyEight

centre to centre to form agrid of 1200X600mm and secondary cross ’T’ of Paise NinetySix Only

length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form grid of size

600X600mm resting on periphery walls/partitions on a perimeter wall angle

pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for

services like diffusers, grills, light fittings, fixtures, smoke detectors etc.,

wherever required, Main ‘T’ runners to be suspended from ceiling

Qty Item of Work In Rupees Unit Amount In Words

using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia

and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel

level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main

‘T’ bottom exposed with 24mm of all T-sections shall be prepainted with

polyester baked paint, for all heights, as per specifications, drawings and as

directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area

will be measured from wall to wall. No deduction shall be made for exposed

frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate

ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85%

noncombustible as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Single Leaf Flush Door with WPC frame and finish with 1mm thick Laminate

(35MM): Providing and fixing in position 35 mm thick solid core wooden flush

doors of approved make having fire retardant ply facing on both sides and

finished with 1mm thick laminate as approved ,WPC frame size - 200 X100 Rupees Nine Thousand

43 86.70 MM, Hardware system of Geze/Dorma like Hinges , Boxer type door closer , 9,346.67 Sqm Three Hundred FourtySix

Door handle , Euro profile , lock ,Door stop . work complete including all type Paise SixtySeven Only

of hardware, fittings , fixtures etc complete as per detailed drawings and

specifications.

Flush Door With WPC frame (50X150 mm) : Providing and fixing in position

35mm thick solid core wooden flush doors of approved make having fire

retardant ply facing on both sides and finished with 1 mm thick laminate as

Rupees Five Thousand

approved , Hardware system of Geze/Dorma like ( Hinges , Boxer type door

44 51.98 5,021.73 Sqm TwentyOne Paise

closer , Door handle , Euro profile , lock , Door stop ) . work complete

SeventyThree Only

including all type of hardware, fittings , fixtures etc complete as per detailed

drawings and specifications. sample mock shall be approved from Employer's

representative/ Employer.

Qty Item of Work In Rupees Unit Amount In Words

Accoustic door : Providing & Fixing Acoustical Isolation door of wood frame of

145 mm x 75 mm (nominal) along with fire & smoke seal strip of size 12mm x

4mm for 120 minutes fire rated and Rw 35 db acoustic door of thickness

mm having 50 mm infill of 50 mm thick & 48 kg/cumt density glasswool

sandwiched by 2 Nos of 12 mm Anutone or equivalent make Magnesia Oxide

fire rated boards (edge to edge on internal hardwood frame) and cladded with

6 mm fire resistant ply with 3 mm rubber sheet interlayer and finished with

both side 4 mm thick veneer and 45 x 5 mm thick polished teakwood pattis

with 1.5 mm groove in between on the other. 25 mm teakwood frame will Rupees ThirtyThree

cover the entire door panel as shown in the drawing. The door shall be Thousand One Hundred

45 9.60 resistant to mould growth, abrasion, vermin, minor impact and short term 33,102.75 Sqm

Two Paise SeventyFive

exposure to water. The door shall have acoustic seal in door rebates and drop Only

dead seal at the bottom. Additional teakwood frame shall be provided

hrizontally in the center for enforcement. The sound reducing doors shall be

finish by teak veneer boath side as per apporevd make and sample finish with

semi glosst PU polish rected by the engineer / architect in charge and also

include door closure, door coordinator, panic bar with outside key, handle, etc

Hardware system of Geze/Dorma like ( Hinges , Boxer type door closer , Door

handle , Euro profile , lock ,Door stop )

Providing and fixing 'Y' Shaped barbed wire fencing on Compound wall top

with vertical angle of 50 x 50 x 6mm x 0.50mt. Height two cross angle 50 x 50 x

6mm x 0.45mt. Length, having 3 horizontal and two diagonal rows of barbed

wire (9.38 Kg/100mt) on vertical angle and three horizontal and two diagonal Rupees Three Hundred

46 240.45 barbed wire rows on each cross angle including cost of barbed wire, necessary 321.58 Rmt TwentyOne Paise

GI Stapplings, fixing on top of Compound wall, painting angle with one coat of FiftyEight Only

anticorrosive primer and two coats of enamel paint of approved quality,

necessary scaffolding etc. Complete as per the Direction of the Engineer in

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing window having extruded aluminum Colour anodized

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt

Rupees One Thousand

with sliding shutters of horizontal member size 40 mmx18mm x1.29mm @

47 172.06 1,583.95 Sqm Five Hundred EightyThree

wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @ wt.of

Paise NinetyFive Only

0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square or Rupees One Hundred

round bars with round headed bolts and nuts or by screws (A) Plain Grill. One Paise Seventeen Only

Glass Partition With Aluminium Frame : Providing and fixing in position Full

height 10mm thick toughened clear glass partition using Saint Gobain or

equivalent glass to false ceiling height ply boxing to hold glass at top &

Aluminum Profile of size +19mm x 19mm x 2.5mm at Four side (Periphery) of

approved make as per architect's instruction and as per detail drawing. Fixed

panels of 10mm thick customized clear toughened glass, edge polished fixing

with necessary cutting of glass as per drawing & specifications including

providing and fixing EPDM quality rubber for aluminum sections / filling

transparent neutral cure glazed & metal silicon sealant of approved make on Rupees Two Thousand

90.00 the periphery of the glass & wood etc Each glass panel secured to the ply box 2,370.09 Sqm Three Hundred Seventy

at top and Aluminium Profile .Item includes all necessary fitting / fixing etc. Paise Nine Only

complete as per drawing, approval and instructions of the Architect. NOTE:

Partition ht will be measured from finish floor to false ceiling level only. The

rate shall be in sq.mt for all floors and at all heights including all costs. The

rates are also inclusive of necessary scaffolding, ply box beam, tools, tackles,

scaffolding etc complete. Glass width size shall be as per sugestion by

Employer's representative/ Employer. including cost for wooden beam for

supprot for glass partition

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing rolling shutters of approved make made of 80 mm wide

M.S. laths inter-locked together through their entire length and jointed

together at the ends by end locks mounted on specially designed pipe shaft Rupees Four Thousand

49 18.00 with bracket plates, guide channels and arragements for inside and outside 4,495.02 Sqm Four Hundred NinetyFive

locking with push-pull operation including the cost of hood cover and spring Paise Two Only

etc. complete. (B) Shutters having width 3.5 M. and above

Providing, fabricating, assembling, hoisting/ erecting and fixing in position MS

Rolled Steel Sections, ISMB, ISMC, Hollow sections, Tubular Sections, MS

Plates, Chequered Plates, MS Pipes, Perforated Sheet, deep threaded MS bolts,

threaded J bolts, insert plate, support plate etc at all heights/ all levels/ all

floors/ all shapes & sizes with all leads & lifts as per drawing and direction of

engineer incharge. all confirming to latest relevant IS codes for the

workmanship of steel structures like staircases, railings, handrail, jali, gates,

grills, bracings, platforms, brackets, monkey ladder, cattle trap, false ceiling

frame work etc. the Rate is including cutting, bending, bolting and welding the Rupees One Hundred

50 260.00 members all as per structural drawings and as per detailed specifications (for 121.96 Kg TwentyOne Paise

materials & workmanship) including necessary scaffolding/ staging etc. NinetySix Only

complete in the situations described hereinafter. The rate shall include dry

sanding, degreasing (wet cleaning) & preparation of rustfree surface manually

or mechanically, metal putty to make the surface even and smooth, 2 coat zinc

chromate yellow oxide primer and 2 coat of enamel paint of approved shade

of paint over all the surfaces of the steel sections or as specified in the drawing.

Wall Punning : Providing and applying Plasto XP Gypsum plaster ( USG Boral)

or equivalent make , minimum 12 mm thick in Wall and minimum 6 mm thick

in ceiling , including all labors, tools, tackles, scaffolding, surface preparation,

mixing of material, transportation (lead & lift) applying in position, Levelling,

Rupees Four Hundred

finishing, cleaning etc. complete to satisfaction of Employer's representative/

51 300.00 418.14 Sqm Eighteen Paise Fourteen

Employer. The rate also include making of grooves above skirting, Dedo tiles

and around window and door jambs etc. (cost of Bonding agent to the ceiling

or RCC surfaces is to be included in the item).item shall be used as per

instruction of Employer's representative/ Employer .

Qty Item of Work In Rupees Unit Amount In Words

PLY WALL PANELING FINISH WITH VENEER FINISH : Providing & fixing 12mm

thick IS 710 MR Grade ply fixed on frame work. The framework shall be fixed

as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c horizontally.

The frame work shall be made from Aluminium section make

JINDAL/HINDALCO or equivalent conforming to IS specification In paneling,

(intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning

point ) shall be fixed to the wall/floor & ceiling with Sheet metal

screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by

filling required size wedges /washers/ MS wall connectors or packings of

teak wood /MS washers to ensure right angles and plumb level. All

ply/wooden frameworks shall be treated with anti-termite treatment & hidden

The framework shall be covered with approved make plywood(IS 710- 12 mm Rupees Three Thousand

52 318.02 ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 3,842.51 Sqm Eight Hundred FourtyTwo

mm thick ply) with semiglossy PU polish & in pattern as shown in the drawing. Paise FiftyOne Only

Rate shall be inclusiveg grooves etc complete as per drawing or as directed by

Employer's representative/ Employer. The rate shall be in Sq.mt of actual

paneling work for all floors, at all heights, all shapes .Rate shall inclusive of

all material ,labor scaffolding, tools, tackles, for all heights and for all levels,

Rates shall also be inclusive of cost of making cut outs/ openings for

electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing

additional sections for strengthening around the openings/cutouts, making

grooves between wall & board or as per drawing /instruction of Employer's

representative/ Employer. and no extra payment shall be considered for

additional sections provided.

All curved surfaces, recesses, waffles shall be part of the paneling including

openable shutter wherever required area and finish with the same material.

Rate shall be inclusive of all item inclusive part of paneling Only the clear

elevation area shall be measured and paid.

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly Rupees Fourty Paise

53 18638.21 brushing the surface free from mortar dropping and other foreign matter and 40.59 Sqm

sand papered smooth.

Qty Item of Work In Rupees Unit Amount In Words

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including Rupees SeventyNine

throughly brushing the surface free from mortar droppings and other foreign Paise TwentyTwo Only

matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two

Rupees One Hundred

coats) to give an required shape even shade after thoroughly brushing the

55 4612.20 114.53 Sqm Fourteen Paise FiftyThree

surface to remove all dirt, and remains of loose powdered materials. etc

Applying priming coat over new steel and other metel surface after and

including preparing the surface by throughly cleaning, oil,grease, dirt and other Rupees ThirtyFour Paise

foreign matter and scoured with brushes fine steel wood, scrapers and sand SixtyEight Only

paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel Paint, brushing, interior to give an even shade including Rupees EightySeven

cleaning the surface an even shade including cleanicn the surface of all dirt, Paise EightyOne Only

dust and other foreign matter.

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed Rupees NinetyOne Paise

58 30.00 before laying. Open ends of the pipe shall be closed as the pipe is installed to 91.70 Rmt

avoid clogging while concreting. Rate shall be inclusive of removal of sleeves

before water proofing or grouting. For all floors / all levels / all heights. (a)

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed Rupees One Hundred

59 25.00 before laying. Open ends of the pipe shall be closed as the pipe is installed to 162.53 Rmt SixtyTwo Paise FiftyThree

avoid clogging while concreting. Rate shall be inclusive of removal of sleeves Only

before water proofing or grouting. For all floors / all levels / all heights. (a)

Qty Item of Work In Rupees Unit Amount In Words

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed Rupees Three Hundred

60 35.00 before laying. Open ends of the pipe shall be closed as the pipe is installed to 308.70 Rmt

Eight Paise Seventy Only

avoid clogging while concreting. Rate shall be inclusive of removal of sleeves

before water proofing or grouting. For all floors / all levels / all heights. (a)

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for

following diameters for services wherever pipes pass through walls/ slabs/

beam in mtrs length. All pipes shall be accurately cut to the required sizes, laid

as per drawing, kept in the position while concreting, and burrs removed Rupees Eight Hundred

61 30.00 before laying. Open ends of the pipe shall be closed as the pipe is installed to 854.86 Rmt FiftyFour Paise EightySix

avoid clogging while concreting. Rate shall be inclusive of removal of sleeves Only

before water proofing or grouting. For all floors / all levels / all heights. (a)

Core cutting : Providing and wet drilling accurate and clean holes of specified

diameter in RCC walls, slabs, beam or any other RCC member without

vibration by core cutting (diamond drilling) machine including scafolding,

safety majors, disposing the debris, cleaning for all levels/ all height as per Rupees One Thousand

62 30.00 structural consultant's drawing, after approval of engineer in charge etc 1,126.66 Nos One Hundred TwentySix

compete. Rate shall be inclusive of filling the hole with non shrink Paise SixtySix Only

grout/Chemical Anchoring in good manner. Measurement shall be taken for

the depth of holes in running meter for specified diameter. Holes shall made

by authorised approved agency. (a) holes from 100 dia.

Core cutting : Providing and wet drilling accurate and clean holes of specified

diameter in RCC walls, slabs, beam or any other RCC member without

vibration by core cutting (diamond drilling) machine including scafolding,

safety majors, disposing the debris, cleaning for all levels/ all height as per Rupees One Thousand

63 40.00 structural consultant's drawing, after approval of engineer in charge etc 1,463.49 Nos Four Hundred SixtyThree

compete. Rate shall be inclusive of filling the hole with non shrink Paise FourtyNine Only

grout//Chemical Anchoring in good manner. Measurement shall be taken for

the depth of holes in running meter for specified diameter. Holes shall made

by authorised approved agency. (b) holes from 150 dia.

Qty Item of Work In Rupees Unit Amount In Words

SS RAILING : Providing and fixing stainless steel (Grade 304) railing made of

Hollow tubes, solid bar, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and fitting the

same with necessary stainless steel nuts and bolts complete, i/c fixing the

railing with necessary accessories & stainless steel dash fasteners, stainless

steel bolts etc., of required size, on the top of the floor or the side of waist slab Rupees Two Thousand

64 222.64 with suitable arrangement as per approval of Engineer-in charge, (for payment 2,960.95 Rmt Nine Hundred Sixty Paise

purpose only weight of stainless steel members shall be considered including NinetyFive Only

fixing accessories such as nuts, bolts, fasteners etc.). Contractor shall prepare

shop drawing based on design, and get approved. Sample/ mockup shall be

approved by Architect.

Roller blind fabric should be made up of 30-35% Fiberglass, 65-70% Vinyl on

Fiberglass, it should have specific low emissivity treatment and Lead free with

Greenguard Gold certification. Fabric approved by Melanoma International

Foundation (MIF), it should cut UV rays with 97% approximately and

antimicrobial properties as per ASTM E 2180, ASTM G21, AATCC30 Part

ASTM D 3273, GREENGUARD Gold and Bacteria Standard ASTM 6329; includes

Microban antimicrobial additives. It should have 3% openness, fabric thickness

should be 0.50-0.55 mm, fabric weight should be 478 grams per square meter,

The fabirc should be Flame retardant as per California U.S. Title 19 (small Rupees Four Thousand

65 153.95 scale), NFPA 701 TM#1 (small scale), NFPA 101 (Class A Rating), IBC Section 4,111.71 Sqm One Hundred Eleven

803.1.1 (Class A Rating), BS 5867 Part 2 Type B Performance, NFPA 701 TM#2 Paise SeventyOne Only

(large scale), CAN/ULC-S 109 (large and small scale), CAN/CGSB2-4.162-M80

with 10 years of warranty against any distortion in fabric due to any reason.

Roller blind tube should be made of Aluminium with a diameter of 38mm,

bottom rod should be powder coated and should come with the end cap to

support the fabric, aluminium brackets and a ball chain or any other sturdy

fixing arrangement as per manufacturer specification all complete as per

direction of Engineer in charge.

Qty Item of Work In Rupees Unit Amount In Words

Providing and applying Lacquer polish of approved make and finish on new

wood and wood based surface to give an even surface, including cleaning the

surface of all dirt, dust and sand papered smooth and including a coat of wood

file after completion of job etc. to the satisfaction of architects / EIC. (Mode of

measurements: Only the polished area shall be measured & paid for the items Rupees Three Hundred

66 100.00 in which polishing is not inclusive in item description) work shall be carried out 377.49 Sqm SeventySeven Paise

as per the manufacture's specification & sample approved..(Exposed wooden FourtyNine Only

surface at all floor) (Mode of Measurements: Only the polished area shall be

measured & paid for the items in which polishing is not inclusive in item

TV UNIT :2140(L)x300(D) : Providing & fixing projector drawer unit As per

detail drawing and reference image and detail shape & size with require

accessories. Top 35 MM th made from 12 mm th IS 303 ply & veneer finish

with semi gloss PU finish Storage body is made of 19mm 303 MR Grade ply

with veneer finish and inner side 1.5 mm thick laminate finish including

require nos of drawer with all type of ftings ,cutout for air cerculation ,require

fixtures, hardware Hettich/Haffle make etc complete .SS 304 grade conceal

Rupees Fourty Thousand

handle shall be provide as per approved selection &detailed drawing and

67 1.00 40,855.76 Nos Eight Hundred FiftyFive

instruction of Employer's representative/ Employer.Rate shall incusive require

Paise SeventySix Only

fabrication work considering load capasity of AV equipment.The work shall be

done as per the approved specifications, sample approved and as directed by

the Architect and Engineer-in-charge. The rate shall be for complete item

inclusive of all material, labour, wastages, necessary tools & tackles, adhesives

consumable hardware & required SS 304 grade hardware/accessories of

SS RACK : Supplying & Stacking of Tubular section of Stainless steel storage

Rack of size 1200mm(width) X 600mm (Depth) & 1800mm height frame of

grade steel.etc. The rate shall be for complete item inclusive of all material, Rupees Fourteen

labour, necessary tools & tackles,approved make for all floors, all heights, all Thousand Two Hundred

levels and all places within campus. Contractor shall do all the needful and TwentyEight Paise

shall fulfill Architect's design intent. No additional claims will be entertained ThirtyEight Only

Qty Item of Work In Rupees Unit Amount In Words

Lawn plantation : 1) Supplying and filling with good quality garden soil

obtained from outside, including watering, ramming well, consolidating,

compacting and dressing etc. complete, as directed. 2) Supply and spreading

of FYM shall be done in proper slope including watering and fine dressing.

Termite treatment to be done before laying of FYM. 3) Providing and laying

lawn with earth 50mm to 60mm thickness on prepared ground with proper

level and ramming with tools wooden (Dhurmos) and than rolling the surface Rupees Six Hundred

with light roller make the surface smoothen and light watering with sprinkler FiftyThree Paise Two Only

and maintenance more till the grass establish properly, as per direction of

Engineer in charge. All steps have to followed by contractor as specified for

proper establishment of lawn. Cost shall be for surface preparation to after

lawn establishment, all steps inclusive in this item.

Tree plantation : Supplying and planting well grown species of trees of

required height (average height of tree 3' to 5' above bags/ pots) including

mixing of FYM & good/ garden soil, termite treatment, pestisides, and planting Rupees Eight Hundred

70 42.00 of plants in excavated pit/ existing tree pit and species as per selection given 847.90 Nos FourtySeven Paise Ninety

by Architect. Cost of excavation or tree pit shal be paid in relevant tender item. Only

Tree Cutting : Felling / Cutting trees of the following girth (measured at a

height of 1 M above ground level) including cutting of trunks and branches

removing the roots, filling the pit and depression due to the same and taking

away all materials and providing credit to the client. Contractor will be solely

responsible for finding out non objectionable place for dumping, disposing,

storing of available material (in no case the material obtained shall be dumped

within the campus premises) and taking all precautions for not to damage any

surroundings and carry out the tree cutting work in safest possible manner. Rupees Three Thousand

71 100.00 Trees for the same shall be identified and given in parts during the project 3,484.50 Nos Four Hundred EightyFour

tenure. Before quoting Credit value, the contractor should examine and assess Paise Fifty Only

the conditions. (the necessary permission for cutting the same should be

obtained by the contractor from relevant authority). The Credit amount will be

deducted from next RA bill of contractor after issuance of written confirmation

through Engineer - in - charge / department.

A) For felling/cutting trees having girth dia beyond 30cm and up to but

including 60cm - Minimum credit to be given is Rs. 3,000/- per no. of tree.

Qty Item of Work In Rupees Unit Amount In Words

Shrub plantation : Supplying well grown shrub plants and ground cover plants

of average height 3' to 4' and planting in planter or on ground by providing and

mixing FYM @ 0.06cum/pit with soil pesticide & insecticide. Plants should be

disease free and fungus free in 8"x 10" polythene bag. Plastic bags or pots

should be removed carefully and soil around the roots should not be dropped Rupees One Thousand

72 116.00 or disturbed much. Bill shall be placed after completion of maintenance period 1,224.22 Nos Two Hundred TwentyFour

but not before stabilizing the shrubs. Mortality rates to be inclusive. Work shall Paise TwentyTwo Only

be done as shown in the drawing or as directed and approved by EIC. The

ground coverage should be dense and uniform throughout the planting area.

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per approved design Confirming to IS 15658 : Rupees Six Hundred

73 486.62 2006 including 35 mm Sand layer for levelling and filling the joint with sand in 686.90 Sqm EightySix Paise Ninety

proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. Only

Kerb Stone : Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30cm length,30cm height and 15cm thick of M250 grade Rupees Three Hundred

74 116.00 concret as per approved design and including excavation for fixing in proper 361.64 Rmt SixtyOne Paise SixtyFour

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. Only

Qty Item of Work In Rupees Unit Amount In Words

Convex Mirror is a curved mirror : Providing and supplying Convex Mirror as

per references image, detail and approved sample by Architect/EIC. The

Convex Safety Mirror is structured with a polycarbonated front and acrylic back

which makes it lighter and easy to place on any exterior. It also looks like a

bubble mirror that has a curvature of the 130-degree view. The Convex Mirror

comes with a protective film coating that makes the traffic mirror scratch-

resistant,break-resistant, and tear-proof.The Polycarbonate Lens reflects a

crystal clear and bright image of the view which can be seen from a long

Rupees Two Thousand

distance. It also magnifies the opposite fronts that help the drivers to locate

75 2.00 2,903.75 Nos Nine Hundred Three Paise

small things clearly. The contractor shall Convex Mirror with Installation Kit,

SeventyFive Only

Nuts & Bolts Included support, Location, any Height and all complet installation

work as per site condition. This Item includes cost of all labour, transfort etc.

as required for completing the work in all respects. All works are carried as per

approval and instructions of the architect. Rate shall inclusive of sample, all

materials, loading, unloading, all taxes, transportation, placing at all floors and

for all leads,all accessories as described in item description.

Road Marking with hot applied thermoplastic paints with reflectorising glass

beads on bitumen/RCC surface providing and laying a hot applied

thermoplastic compound 2.5mm thick including reflectorising glass beads

@250gms/m2 area , thickness of 2.5mm is excluding of surface applied glass

beads as per IRC: 35-2015. The finished surface to be levelled, uniform and free

from streaks and holes. Thermoplastic paint shall be used for Zebra Patta,

Bump Patta lane, edge line, cut patta, arrows for direction, letter or number Rupees Three Hundred

76 15.27 writing etc. The white colour marking should provide liminance co-efficient on 367.72 Sqm SixtySeven Paise

cement road shall be min 130 mcd/m2/lux and Asphalt road shall be min 100 SeventyTwo Only

mcd/m2/lux during the service life during the day time the marking should

make the performance criteria for night time reflectivity, wet reflectivity and

skid resistance as mentioned in the section- 15 of IRC: 35-2015. Warranty for

retro reflectivity shall be 2(Two) years.

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing of Corner Guard for Various Flashing in 100mm x 100mm

size in Equal Shape with 5mm edge lipping on both side . The Angle Flashing

shall be made out of 8 to 10 mm thick, The corner guard shall have plastic Rupees Three Hundred

77 92.00 protective guard film of minimum 25 microns to avoid scratches during 372.84 Nos SeventyTwo Paise

transportation. The U track shall be fixed with suitable POP rivet with wall and EightyFour Only

roof panels with minimum spacing of 450 mm c/c. size of guard 1000mm length

Providing and fixing Rumblers strips of required size with any design suggested

by Architectect/ EIC like bottom design, chequered design, anti skid pattern

specially designed for road grip as per drawing & sample approved by Architect Rupees One Thousand

which is covered with premix bituminous carpet at 1m centre to centre at Seven Hundred

approved locations to control speed marked with white strips of road marking EightyEight Paise

paint etc complete as directed by Engineer in charge. SeventyOne Only

Cat Eye/Road Stud/RPM: Supplying of Molded TwinShanks Raised Pavement

Markers made of polycarbonate and ABS moulded body and reflective

panelswithmicro prismatic lens capable of providing total internal reflection of

the lightenteringthe lens face and shall support a loadof 13635kgs. tested in

accordance to ASTMD4280Type Handcomplying to Specifications of Category A

of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height,

width and length shall not exceed 20mm, 130mm and 130mm and with

Rupees Two Hundred

minimum reflective area of 13Sq cmon each side and thes lope to the base

79 50.00 217.40 Nos Seventeen Paise Fourty

shall be 35+/-5 degree.The strength of detachment of the integrated cylindrical

shanks, (of diameter not less than19+/-2mm and height not less than

30+/2mm) from the body is to be a minimum value of 500Kgf. Fixing will be by

drilling holes on the road for the shanks togo inside, without nails and using

epoxy resin based adhesive as per manufacturers recommendation and The

color of the marker should be as per the IRC 35-2015 and as directed by

Engineer-in-charge.

Qty Item of Work In Rupees Unit Amount In Words

Reception Table : Providing and Supplying reception table. Reception table of

the following specifications. Work Surface - Made of 25mm Thick Pre-

laminated twin board of E1-P2 grade and approved shade confirming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap

along with a Gromett is provided on work surface for wire management.Wire

Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch

plate (8+3 Module cut out provision for Anchor Roma) which is fixed with

worktop along the width at Access Flap position.Modesty Panel and Side

Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and

approved shade confirming to IS-12823:1990, Edge banded with matching

mm thick PVC lipping.Understructure - Made of 18mm Thick Pre-laminated Rupees SixtyNine

80 1.00 twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, 69,690.00 Nos Thousand Six Hundred

Edge banded with matching 2 mm thick PVC lipping.TOP shelf - Made of 18mm Ninety Only

Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming

to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Hinge

Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2

grade and approved shade confirming to IS-12823:1990, Edge banded with

matching 2 mm thick PVC lipping.**Drawer bottom is made of 5.5thk MDF

whiteboard Handle is provided for ease of opening. HDU and Drawer is

provided with cam lock for security.Essential Accessories - Wire Riser made of

0.8mm CRCA (IS-513) is provided for proper wire management.Organizer Plate

made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes

.Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag

hanging.Length - 2400mmDepth - 1770,870mm.Height - 1080mm.The rate

shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

Qty Item of Work In Rupees Unit Amount In Words

Providing and Supplying single bed with Overall Size:Width - 2050.0 mm

Depth - 973.0 mm Height - 720.0 mm.Material:Headboard panels are made of

18 mm thick Prelaminated Particle Board. All the exposed edges are edge

banded with 2 mm thick PVC edge banding.Bed leg frame structure consist of

metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal

Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes

are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt

is made of 0.6 mm CRCA SHEET Mattress frame sheetmetal top is made of

mm CRCA SHEET.Hardware:The high quality hardware used. Rupees Eight Thousand

81 3.00 Construction:Knock Down construction.Packets: 1 packet. Finish:18 mm thick 8,711.25 Nos Seven Hundred Eleven

Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Bed leg Paise TwentyFive Only

frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO.

9001904to thickness of 50 microns (+-10). Mattress frame structure are

powder coated in shade : EPP FR TEX. MILKY WHITE 20K, REF NO. 9003456 to

thickness of 50 microns (+-10). Rest all metals are powder coated in shade :

S/G CHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10).The rate

shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover

,with 12mm thick prelam mdf back- 900x1950x100mm - goldline plus pu form

40 density 300 gsm cottan satin quilt cover.Mattress back putti made of 12mm Rupees Twelve Thousand

82 3.00 thick prelam mdf bothside white finish.Kurlon dew pillow 600x400 Fill: 12,335.13 Nos Three Hundred ThirtyFive

Polyester Fibre Quality of shell fabric: 110 GSM cotton satin patti Outer Shell Paise Thirteen Only

Layer: Cotton Fill Weight (in gms): 650.Bedsheet with pillow 100 Percent

cotton of bombay dyeing or eq.

Qty Item of Work In Rupees Unit Amount In Words

Table Type 01 Providing and Supplying main table with ERU. Main Table with

ERU of the following specifications. Its size shall be 1650 Width x 700 Depth x

743 Height (Main Desk) 1000 Width X 450Depth X 743 Height (ERU).Top shall

be of 18 mm thickness made of PLT board with 2 mm Edge banding. Wenge

and savannah Maple PLT board shall be used. The Understructure shall be in Rupees ThirtySix

pre-laminated panels made with PLT boards . 2- Drawerand 3 - Drawer storage Thousand Seven Hundred

83 4.00 units with different combinations to support tops made with 18 mm PLT 36,774.25 Nos

SeventyFour Paise

boards of different colours.Modesty and back panels made with 18 mm PLT TwentyFive Only

boards. The pedestals / storages shall be fitted with necessary locks. The rate

shall include all materials, hardware, and labour etc. complete as per

instruction of engineer-in charge.

Table Type 02 : Providing and Supplying office table of the following

specifications Its size shall be 1500 Width x 750 Depth x 740 Height . The top

shall be made from 25 mm thick pre- laminated board . All the edges are

sealed with 2 mm thick PVC edge band all around . Side panels shall be made

from 25 mm thick pre- laminated paticle board . All the edges are sealed with

mm thick PVC edge band on the user side and 0.8 mm on the top and bottom

side .The side panels have 2 glide screws each for levelling of the desk.

Modesty panel shall be made from 18 mm thick pre- laminated particle board . Rupees Nine Thousand

84 3.00 All the edges are sealed with 0.8 mm thick PVC edge band all around. 9,292.00 Nos Two Hundred NinetyTwo

Freestanding Pedestal shall be made from 18 mm pre- laminated particle Only

board with a combination of 2 mm and 0.8 mm PVC edge band on all the

exposed surfaces as per requirement . The drawers are provided with suitable

slides for smooth operation . All the pedestal drawers are centrally locked with

a single key .Drawer slides are of Hettich.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

(Location : Conference Room Work Table)

Qty Item of Work In Rupees Unit Amount In Words

CHAIR TYPE - 01 (MAIN CHAIR) : Providing and Supplying Leatherette chair

with High Back Chair. SEAT/BACK ASSEMBLY : The Cushioned seat should be

made of Injection molded Plastic outer and inner. Plastic Inner should be

upholstered with pure leather and moulded High Resilience (HR) Polyurethane

foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25 Percent

compression.The Cushioned back should be made of PU Foam with insitu

molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It

upholstered with Pure Leather.Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D)BACK SIZE

: 47.5 cm. (W) x 77 cm. (D)ARMRESTS: The armrest top should be moulded

from polyurethane(PU), upholstered in pure leather and mounted on to a drop

lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01

cm thk M.S E.R.W tube having chrome plated finish.The armrest height

Rupees TwentyTwo

adjustable up to 6.5±0.5cm in 5 steps.ACTIVE BIO-SYNCHRO MECHANISM: The

85 4.00 22,068.50 Nos Thousand SixtyEight Paise

adjustable tilting mechanism should be designed with the following features:•

360° revolving type.• Front-pivot for tilt with feet resting on ground and

continuous lumbar support ensuring more comfort.• Tilt tension adjustment

can be operated in seating position.• 5-position Tilt limiter giving option of

variable tilt angle to the chair.• Seat/back tilting ratio of 1: 2• The mechanism

housing should be made up of HPDC Aluminium black powder coated.SEAT

DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat

through a sliding mechanism. Seat depth adjustment range should be of

6.0±0.5 cm.ADJUSTABLE BACK SUPPORT: Back Frame should be connected to

the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range

of 7.42±0.5 cm for the comfortable back support to suit individual

need.PNEUMATIC HT.

ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of

10.0±0.3 cm.PEDESTAL ASSEMBLY The pedestal should be High Pressure Die

cast polished Aluminium and fitted with 5 nos. twin wheel castors. The

pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With

castors.)TWIN WHEEL CASTORS:The twin wheel castors should be injection

moulded in Black Polypropylene. Overall Dimensions of Chair-Seat Height -

44.5 to 54.5 cm.Height -114.0-131.5 cm.Width and Depth of Chair as

measured from base - Width-76.1 cm and Depth-76.1 cmThe rate shall include

all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Qty Item of Work In Rupees Unit Amount In Words

CHAIR TYPE - 02 (VISITOR) :- AProviding and Supplying Cushion back High

Back Chair. SEAT/BACK ASSEMBLY:-The seat/back shall be made up of

±0.1cm thick hot pressed plywood measured. upholstered with fabric and

moulded Polyurethane foam together with moulded seat and back covers. The

back foam shall be designed with contoured lumbar support for extra comfort.

Back size -50.0 cm (W) x 72.0 cm (H) . Seat Size-50.0 cm (W) x 46.5cm. (D).

HIGH RESILIENCE(HR) POLYURETHANE FOAM: The HR Polyurethane foam

should be moulded with density 45±2kg/m3-and Hardness load 16 ±2 kgf for

25 Percent compressionSEAT/BACK COVERS:The seat cover shall be injection

moulded in black co-polymer polypropylene and back cover should be vacuum

formed from ABS sheets.ARMRESTS: The one-piece armrests shall be made of

black integral skin polyurethane with 50-70 Shore 'A' Hardness and reinforced

with M.S. insert. The armrests shall be scratch and weather resistant tant. The Rupees Ten Thousand

86 8.00 armrests shall be fitted to the seat with seat/armrest connecting strip 10,453.50 Nos Four Hundred FiftyThree

assembly made of 0.5 ±0.05-cm. thick HR steel. CENTER TILT MECHANISM:The Paise Fifty Only

center tilt mechanism shall be designed as-360° revolving type, 17° ±2°

maximum tilt on pivot at center, Upright position locking, Tilt tension

adjustment.PNEUMATIC HEIGHT ADJUSTMENT:The pneumatic height

adjustment shall have an adjustment stroke of 12.0 ±0.3cm. TELESCOPIC

BELLOW ASSEMBLY: The bellow shall be 3 piece telescopic type and injection

moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal shall be

injection moulded in black 33 Percent glass-filled Nylon-66 and fitted with

nos. twin wheel castors. Thepedestal shall be 66.3 ±0.5cm.(76.3±1.0 cm with

castors) TWIN WHEEL CASTORS;The twin wheel castors shall be injection

moulded in Black Nylon.Overall Dimensions of

Chair-Seat Height - min 44.2 to max 54.2cm.Height - min103.3 to max

115.3cm.Width and Depth of Chair as measured from pedestal - Width-76.3

cm and Depth-76.3 cm.The rate shall include all materials, hardware, and

labour etc. complete as per instruction of engineer-in charge.

Qty Item of Work In Rupees Unit Amount In Words

CHAIR TYPE - 03 : Providing and Supplying High Back Chair. SEAT/BACK A

SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood

measured.The Back is made up of injection mou1ded glass filled nylon and

upholstered using Mesh fabric with high tenacity yarn.

* SEAT SIZE : 47.0 cm. (W) x 51.5 cm (D)* BACK SIZE : 45.0 cm. (W) x 65.3 cm.

(H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat

foam is moulded with density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per

IS:7888 for 25 Percent compression.ARMRESTS : The adjustable armrest is

designed with the following features : • Up-Down adjustment- 8 steps (8

0±0.Scm range)• Height adjustable armrest structure which is Powder Coated

and fitted with an armrest top. • Fixed Armrest Top is PU moulded over metal

insert.LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists of

polypropylene pad with moulded polyurethane foam and covered with Rupees Sixteen Thousand

87 18.00 polyester fabric.The Height of Lumbar pad can be adjusted through two 16,888.21 Nos Eight Hundred EightyEight

projecting knobs provided on the rear side of the pa6. Lumbar pad has an Paise TwentyOne Only

adjustment of 8.0 ± 0.5 cm in height.FRONT PIVOT SYNCHRO MECHANISM: The

adjustable tilting mechanism is designed with the following features.• 360°

revolving type.• Single point control.• Front-pivot for tilt with feet resting on

ground ensuring more comfort.• Tilt tension adjustment.• 4-position locking

with anti-shock feature.• Seat/back tilting ratio of 1:2.PNEUMATIC HEiGHT

ADJUSTMENT. The pneumatic height adjustment has an adjustment stroke oi

10.0 ± 0.3 cn°.Pedestal Assembly : the pedestal is injection moulded in black

Percent glass filled nylon and fitted with 5 nos. twin wheel castors. The

pedestal pitch center dia is 66.1± 0.5 cm.TWIN WHEEL CASTORS: The twin

wheel castors are injection moulded in black Nylon. NECKREST : The Neckrest

assembly consist of polypropylene pad with moulded

polyurethane foam and covered with polyester fabric Neckrest is fixed to Back

Assembly through Neckrest connector Neckrest assembly has height

adjustment of4.2 ± 0.5 cm and rotation adjustment of overall76°+ 2°. The

complete neckrest assembly is retro fit to the main chair.The rate shall include

all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

Qty Item of Work In Rupees Unit Amount In Words

CHAIR TYPE - 04 : PProviding and Supplyin .Mid Back Chair. SEAT/BACK A

SSEMBLY: The seat is made up of 1.2 ± 0.1cm thk. hot pressed plywood

measured.The Back is made up of injection mou1ded glass filled nylon and

upholstered using Mesh fabric with high tenacity yarn.* SEAT SIZE : 47.0 cm.

(W) x 51.5 cm (D).* BACK SIZE : 45.0 cm. (W) x 65.3 cm. (H)HIGH RESILIENCE

(HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with

density 45+/-2 kg/m° and hardness 16 ± 2 kgf as per IS:7888 for 25 Percent

compression.ARMRESTS : The adjustable armrest is designed with the

following features :• Up-Down adjustment- 8 steps (8 0±0.Scm range)• Height

adjustable armrest structure which is Powder Coated and fitted with an

armrest top.• Fixed Armrest Top is PU moulded over metal insert.LUMBAR

SUPPORT ASSEMBLY: The Lumbar support consists of polypropylene pad with

moulded polyurethane foam and covered with polyester fabric.The Height of Rupees Fifteen Thousand

88 15.00 Lumbar pad can be adjusted through two projecting knobs provided on the 15,099.50 Nos NinetyNine Paise Fifty

rear side of the pa6. Lumbar pad has an adjustment of 8.0 ± 0.5 cm in Only

height.FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism

is designedwith the following features.• 360° revolving type.• Single point

control.• Front-pivot for tilt with feet resting on ground ensuring more

comfort.• Tilt tension adjustment.• 4-position locking with anti-shock feature.•

Seat/back tilting ratio of1:2.PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic

height adjustment has an adjustment stroke oi 10.0 ± 0.3 cn°.Pedestal

Assembly : the pedestal is injection moulded in black 30 Percent glass filled

nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is

66.1± 0.5 cm.TWIN WHEEL CASTORS: The twin wheel castors are injection

moulded in black Nylon.The rate shall include all materials, hardware, and

labour etc. complete as per instruction of engineer-in charge.

Qty Item of Work In Rupees Unit Amount In Words

CHAIR (Type-05) : Model equvivalant make -Monarch-Nez Low back Fix Model

Code: 871NAA4SB Features: Low Back with Upholstered Seat & Mesh Back,

Visitor model Adjustable Armrest, Black Cantilever Base. Supplying and placing

low Back Revolving Chair with Seat made out of PU foam upholstry in Fabric.

The back is Elastomeric Mesh (for breathing of back) provides elastic support,

yet allowing ventilation for airly comfort. Lumber Support fits comfortably to

the curve of your back to provide additional support for your lower back (fixed

with the back for Long hours comfort). Foam Density 50+ 5 mm. FULL BACK

SIZE : 560 mm (ht). Back Height ( Total Chair ) = ( 450- 560 ) & Width 670 - 720 Rupees Eleven Thousand

89 56.00 mm. Armrest : PP armrest with 4 way adjustable for height, width, depth & 11,557.43 Nos Five Hundred FiftySeven

swivel angle. Armrest parts of moulded polypropylene & steel stamping, in Paise FourtyThree Only

black finish.Base : Cantilever Base Model Similar to the picture attached Rate

shall be inclusive of all materials, loading, unloading, all taxes, transportation,

placing at all floors and for all leads, polishing and all accessories as described

in item description.As approval of architect. (Location : Journal Section, Book

Bank Section, NEWS Paper Section, Literature Section, Back Volume Section &

Discussion Section)

Qty Item of Work In Rupees Unit Amount In Words

Conferences Table (U Shape) Custom Made : Work Surface-Made of 36mm

thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm

PVC membrane pressed on to top and having chamfered edge.Plastic ABS

access flap is provided for easy access to wires and cables. Work top is

available in various shapes. Understructure-The Under-structure consists of

mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and

approved shade conforming to IS-12823:1990, Edge banded with matching

mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for

connecting panels together.Modesty Panel-Made of 18mm Thick Pre-

laminated twin board of E1-P2 grade and approved shade conforming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping.Powder Rupees Two Lakh

coated accent metal strip provided below work surface to enhance aesthetics. EightyEight Thousand Two

It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT Hundred EightySix Paise

40-60 microns). Wire Management-An array of panels made of 0.8mm CRCA ThirtyTwo Only

MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow

of wires and cables. Provision to mount Anchor Roma 6 module plate is

provided below worktop. Cutout on top with two piece injection moulded

plastic part polymer component is fitted to pullout audio,video cables onto

worktop and connect devices charger to power socket below worktop. Size :

STR MAIN - 2757 X 800 X 750, 2 STR SHARED - 2757 X 800 X 750 2 STR Mid

Arc_LH - 1980 X 800 X 750, 2 STR Mid Arc_RH - 1980 X 800 X 750 - Total U

Shape - 6717 X 800 X

Qty Item of Work In Rupees Unit Amount In Words

DIAS Lecture Stand - + 635 (L) x + 430 (W) x + 1150 (H) : Providing and fixing as

per detail shape and size table unit consist table with all required necessary

accessories with IS 303 BWR ply structure and vertical support from teak wood

with PU matt polish, including all type of hardware, fittings, fixtures, tools,

tackes etc complete as per attached ref image and drawing. The work shall be

done as per the specifications, sample approved and as directed by the

Architect and Engineer-in-charge. Provding and fixing/placing custom made

Rupees ThirtyFive

furniture as per detail drawing/ref.image.The work shall be done as per the

Thousand One Hundred

91 1.00 approved shop drawing (to be prepared by contractor), specifications, mock up 35,193.45 Nos

NinetyThree Paise

sample approved and as directed by the Architect and Engineer-in-charge. The

FourtyFive Only

rate shall be for complete item inclusive of all material, labour, wastages,

necessary tools & tackles,approved make for all floors, all heights, all levels and

all places within campus. Contractor shall do all the needful and shall fulfill

Architect's design intent. No additional claims will be entertained for this. The

unit shall be manufactured in parts and these parts shall be assembled at site.

Sofa 2 Seater : Providing and Supplying Leatherette chair of two seater sofa.

SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with

an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu,

upholstered with fabric or leatherette.BACK FOAM : The back is made up of PU

foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft

foam of density 32±2 kg/cu. mtr, upholstered with fabric or

leatherette.UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick

Rupees ThirtyOne

hot pressed plywood [moisture resistance and termite proof as per IS:303]

92 5.00 31,360.50 Nos Thousand Three Hundred

and pinewood of cross sections devoid of major knots and surface defects.

Sixty Paise Fifty Only

nos. per seat and 3.8mm Dia zigzag spring assembly is mounted over

understructure for cushioning purpose.LEG ASSEMBLY : It is a welded Assembly

made in Stainless steel (grade SS 202) tube and plate with plastic

endcap.Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat

Height (SH): 45.0 CM.The rate shall include all materials, hardware, and labour

etc. complete as per instruction of engineer-in charge.

Qty Item of Work In Rupees Unit Amount In Words

Gang Chair 3 Seater : Providing and Fixing 3 Seater Pero Cross Beam made of

black powder coated regular MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03

cm x 0.2 +/- 0.014 cm size. Legs to be chrom plated made of rolled steel with

0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made from Rupees Fourteen

93 4.00 cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm 14,809.63 Nos Thousand Eight Hundred

thickness. The side Bar is made of chrome Plate solid steel 3.0 cm +/- 0.03cm x Nine Paise SixtyThree Only

1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell to be assembled

on the cross beam with help of M8 Bolts

Center Table : Providing and Supplying Green certified center table should be

mandatorily submitted along with Bid. of coffee table. CENTER TABLE GLASS: It

is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made

in SS 202 grade for focing with understructure. CENTER TABLE Rupees Five Thousand Six

94 2.00 UNDERSTRUCTURE: It is a welded Assembly made in SS202 gradeDia. 12±0.04 5,616.61 Nos Hundred Sixteen Paise

as per IS:1762.Width of table Equal 112.0 cm, Depth Equal60.0 cm, height SixtyOne Only

Equal34.9 cm.The rate shall include all materials, hardware, and labour etc.

complete as per instruction of engineer-in charge.

CORNER TABLE : Overall Size : Width : 55cm Depth : 55cm Height : 55cm (all

dime +/- 40 mm) Materials : All carcass panel are made of 18 mm prelaminated

particle board with edge banding 1.5 mm thickness.Drawer bottom is made of

.9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick

PU painted MDF . Legs : Rubber wood . Hardware : Hettich . Construction :

Knock down .Finish : All 18 mm prelaminated particle board panels are Noce

Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade Rupees Eight Thousand

.Packets : 1 nos . Materials : All carcass panel are made of 18 mm prelaminated Eight Hundred

particle board with edge banding 1.5 mm thickness. Hardware : Hettich . TwentySeven Paise Fourty

Construction : Knock down .Finish : • All 18 mm prelaminated particle board Only

panels are Noce Versaillies with walnut edge band . PU lamination is high gloss

in Ecru shade. (Make : Godrej, Rock Worth, Steel Case) Includes all materials,

hardware, adhesives, cutouts for MEP services, reinforcements, installation,

and finishing as per drawings & EIC instructions

Qty Item of Work In Rupees Unit Amount In Words

Ply palmet work : Providing and fixing wooden pelmets of upto 150mm/950

mm x 150 to 600 mm L shape made of 19mm thick ply as per IS 710 MR Grade

and beading of 1.0 mm thick Laminate for curtains/ blinds/ projection screen of

openings. Rate to be inclusive of lipping, cutting, wastages, necessary fixtures, Rupees One Thousand

96 99.30 nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as 1,844.18 Rmt Eight Hundred FourtyFour

per drawing and approved sample etc finish with veneer semi gloss PU finsh. Paise Eighteen Only

(Mode of Measurements: Only the palmet length shall be measured & paid for

the items in which palmet work is not inclusive in item description)

Revolving Stool : Providing and Supplying of Stool Mch Ht Adj + back Hi Base.

1) SEAT ASSEMBLY: The seat should be made up of 1.2±0.1cm thick flat

plywood and with moulded Polyurethane foam and should be .upholstered

with replaceable synthetic leather covers.SEAT SIZE: Diameter 40.0 cm

ADJUSTMENTS: 360° Revolving type 2) BACK. ASSEMBLY: The back foam should

be designed with contoured Lumbar support for extra comfort. The upholstery

should be available in synthetic leather. *BACK SIZE: 45.0 cm (W) covered with

polyurethane foam 3)HIGH RESILIENCE (HR) POLYURETHANE.

AM:The_HR.polyurethane foam should be _moulded with density Equal 45 +1-

2 kg/m3 and Hardness load 16 ± 2 kgf for 25 Percent compression4)HEIGHT

ADJUSTMENT: The manual height adjustment should be very easy to operate

with a help of a knob.. It can be easily locked at the most comfortable position. Rupees Eight Thousand

97 29.00 5)PEDESTAL ASSEMBLY: The five-prong pedestal should be fabricated from 0.2 8,301.24 Nos Three Hundred One Paise

± 0.02 cm :thick HR sheet.( should be :. DD 1079 / HR ), powder coated ( DFT TwentyFour Only

40-60 microns ) and fitted with an injection moulded black Polypropylene Hub

Cap and 5 nos. twin wheel castors. The pedestal-should be 55.0±0.5cm pitch-

circle-diameter- (65.0±-1,0cm-with-castors).-Circular-foot-ring of 052.0±0.2cm

made up of 01.9±0.2 x 0.12±0.0096cm thk MS ERW Tube for foot support in

High-base stool. 6)TWIN WHEEL CASTORS: The twin wheel castors should be

injection moulded in Black Nylon. Width- 65.0cm, Depth- 65.0 cm, Height-

88.0cm to 99.5cm Seat Height- 67.0 to 78.5cm. The rate shall include all

materials, hardware, and labour etc. complete as per instruction of engineer-in

Qty Item of Work In Rupees Unit Amount In Words

METAL STORAGE UNIT : Metal storage shall have an overall size of

916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have

the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of

0.8mm (high yield strength) and all other components shall have a thickness of

0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength

as per IS:513. The metal storage should have a Mazak handle and Three way Rupees FourtyFour

98 27.00 locking mechanism with Shooting Bolts. It should have a height wise adjustable 44,109.12 Nos Thousand One Hundred

shelf mounting which shall have a Uniformly Distributed Load Capacity of max Nine Paise Twelve Only

40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The

finishing shall include Epoxy powder coated to the thickness of 50 microns (+/-

10). Plenty of colour options and shelving options shall be available.APPROVED

MAKE : GODREJ/HERMAN MILLER/HAWORTH/KNOLL

Low Height Storage Unit Size 1200mm x 600mm x 900mm Providing and

Placing Low Height with top 25mm overall thickness made from 18 mm thick

Pre-laminated Particle board.All the edges are sealed with 2 mm thick PVC

edge band all around, Side and drawer made of 18mm thick Pre-laminated

Rupees TwentyOne

Particle board finish All the edges are sealed with 2 mm thick PVC edge band

Thousand Four Hundred

99 16.00 all around, of approved shade. lock with Two keys and shutter fixed with auto 21,452.91 Nos

FiftyTwo Paise NinetyOne

hinges including . all necessary fixtures and fastening as approved and back of

the unit with 6mm thick Pre-laminated Particle board of approved shade

including all materials and labour etc. Complete as per drawing and instruction

of Engineer-in charge . Low Height Storage Size 1200mm x 600mm x 900mm

FULL HT STORAGE(CARPENTORY WORK): Providing, making and fixing storage

units in position as per reference drawings. Storage made from IS 710 MR

Grade 19 mm thick and 12 mm ply , finish with 1 mm thick laminate both side

as per approved make and shade Solid Shutter: shall be made from IS 710 MR

Grade 19 mm thick ply with both side 1 mm thick laminate finish with

approved locking arrangment system. Ply shutter with refrences image, Rupees Seven Thousand

100 69.82 sample, Detail Drawings and as per architect / EIC instruction. made from 7,624.74 Sqm Six Hundred TwentyFour

aluminium SS finish profile (olive or eqvilant approved make) with require all Paise SeventyFour Only

necessary accessories And locking arrangment system Shelf: as instruction of

Employer's representative/ Employer making and fixing shelf from IS 710 MR

Grade ply finish with both side approved 1 mm thick laminate.

Qty Item of Work In Rupees Unit Amount In Words

Reception Chair :- Providing, supplying and placing of High Back Chair. SEAT

ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood

upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 51.8cm

(W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled

Polypropylene which is 2 upholstered with Mesh fabric. The back consist of

adjustable Lumbar support made of injection moulded Polypropylene having

an adjustment of 5.0 10.1 cm.

BACK SIZE: 47.9 cm(W) x 66.9 cm (H) HIGH RESILIENCE (HR) POLYURETHANE

FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m

Rupees Nineteen

and hardness 14 ± 2 kgf as per IS:7888 for 25% compression. ARMRESTS

101 1.00 19,903.46 Nos Thousand Nine Hundred

(ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can

Three Paise FourtySix Only

be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment

with moulded PU armtop ACTIVE BIO-SYNCHRO MECHANISM: The adjustable

tilting mechanism is designed with the following features 360° revolving type

Front-pivot for tilt with feet resting on ground & continuous lumber support

ensuring more comfort Till tension adjustment can be operated in seating

position 5 position Tilt limiter giving option of variable sit angle to the chair

Seat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC

Aluminium & black powder coated (DFT 40 to 60 micron)

Qty Item of Work In Rupees Unit Amount In Words

PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an

adjustment stroke of 10.0±0.3cm. PEDESTAL ASSEMBLY: The pedestal is

injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin

wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm.

with castors). TWIN WHEEL CASTORS: The twin wheel castors are Injection

moulded in black Polyamide having 6.01 0.1cm wheel Diameter.

HEADREST: The Headrest sub-assembly is made up of injection moulded glass

filled Polypropylene which is upholstered with moulded HR polyurethane foam

and fabric. It has an adjustment of 3.0 ± 0.1cm & it is assembled over GRETA - -

2.0 Full back chair.The complete headrest assembly is retro fit to the main

WIDTH (W) - 76.0cm

DEPTH (D) - 76.0cm

HEIGHT (H) - 113.0 cm- 123.0cm

SEAT HEIGHT - 43.5 - 54.0cm

This product should be certified by Indoor Advantage GOLD, GREENGUARD

GOLD, BIFMA LEVEL 2 & GREENPRO.

Direct Bought Out Item :Providing and Placing of Dust bin of approved brand Rupees Nine Hundred

102 43.00 Sintex or equivalent (as per photographs)of 5 Liter Capacity 929.20 Nos TwentyNine Paise Twenty

Soft Board : Providing and fixing on wall 12mm thick approved quality soft

board with cotton cloth/fabric of approved make and shade on 12mm thick IS

710 MR Grade ply with 19mm x 25 mm thick Ghana teak wood beading all

around including semi glossy PU polish, as approved sample and as directed by Rupees Three Thousand

103 2.40 Architect. The work shall be measured & paid in Sqm. for all floors, all level 3,061.31 Sqm SixtyOne Paise ThirtyOne

and at all heights including all costs, The rate shall be inclusive of lacquer polish Only

to all the exposed wooden members. Only the clear elevation area of the

cloth/fabric shall be measured and paid.

Artificial Plant : Providing and supplying planters with plant as per selection of

Architect. Item includes cost of all labour, transfort etc. as required for

Rupees Three Thousand

completing the work in all respects. All works are carried as per approval and

104 10.00 3,153.47 Nos One Hundred FiftyThree

instructions of the architect. Rate shall inclusive of sample, all materials,

Paise FourtySeven Only

loading, unloading, all taxes, transportation, placing at all floors and for all

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing Sainless steel signage plate of 1.5mm thick with laser

Rupees Seven Thousand

print/ etching and filled with duco paint of approved make including fixing to

105 5.31 the wall or door with required acessories and as specified type including fixing 7,349.71 smt

FourtyNine Paise

etc complete as directed by engineer in charge

SeventyOne Only

DOOR MAT : 3M Nomad - Wiping technology - Heavy Duty 7150 - or eqvivalant

approved make Grey Colour:Open Contruction Loop Matting with Crush

Rupees One Thousand

Resilient Vinyl with backing. Matting Should be durabe shouldn't Flatten ove

106 34.56 1,261.39 Sqm Two Hundred SixtyOne

time. Thickness Should be 13mm Min.Suitable for heavy traffic areas, where

Paise ThirtyNine Only

traffic is upto 4 lakh people per year. work complete as per approved sample.

Providing & placing in position DIGITAL CLOCK - WALL MOUNTED as per Rupees Two Thousand

107 16.00 architect selection Ajanta Digital Wall Clock (Brown, Black, With Glass) 2,079.09 Nos SeventyNine Paise Nine

Signages : Providing and fixing of the following signages using make of cosign

or equivalent approved make by architect.All the detailed work out as per the

detailed drawing and instruction of Employer's representative/

Employer.,specifications and drawings as indicated there in to all heights and

elevation including necessary scaffoldings / supports /permanant fixing with

cement mortor if fixed to ground etc complete in all respects.The Signage cost Rupees One Thousand

108 61.00 should be inclusive of panels,hanging system,bridges,primary & secondary 1,830.52 Nos Eight Hundred Thirty

fixings,vinyl,painting,powder coating self glowing mateial as directed etc.All Paise FiftyTwo Only

shop drawings and coordination with other services is in scopeof contractor.(

At all floor) Size (150 x 600mm) - FACE /WALL MOUNTED NAME

PLATES/SIGNAGES/INFORMATION SIGNAGES (with back lit)

Qty Item of Work In Rupees Unit Amount In Words

Wall Painting (Canvas painting ): Providing & fixing painting made from canvas

painting Canvas –suitable for oil and acrylic paints. The 100% cotton plain-

woven canvas 1 mm thick laminatewith UV protection, abrasion & chemical

resistance.with require stretching and/or framing.work approved by

Architect.The art work shall be hanged on the wall using heavy duty approved

key-hole chaplas The concept of the painting work will be sugeested by Rupees Sixteen Thousand

109 22.50 architect and interior designer and based on that offers from the artists to be 16,841.75 Sqmt Eight Hundred FourtyOne

invited for design and execution of the painting. The selection of the artist is to Paise SeventyFive Only

be done by architect and interior designer only. Main contractor is bind to

follow the methodology suggested by architect and interior designer to be

followed for development of commissioned art work.Rate are inclusive of artist

appointing by main contractor.

Providing and Fixing the S.S. 304 Letters with back light of given size as per

Architect's drawings and approved sample or make (Approx Height of each

letter 18 to 24 inches) along with all necessary hardwares, scaffolding, Alu/MS

Back support, hanging support and accessories, The rate shall be for complete Rupees ThirtySix

item inclusive of all material, labour, wastages, necessary tools & tackles, for Thousand Three Hundred

all floors, all heights, all levels and all places within campus. Contractor shall do FourtyThree Paise

all the needful and shall fulfill Architect's design intent. No additional claims EightyFour Only

will be entertained for this. (STATE LEVEL VACCINE STORE AT NAROL LAPROSY

CAMPUS AHMEDABAD )

Providing and Laying Euro Carbon Steel M Series Material Handaling Trolleys

The Product has best in class ground clearence of 200mm makes it a breeze to

use even on though terrain. High Strength Steel makes the trolley rough, rigid,

& Ultra Durable Rubber Anti Skid Platform Makes it user Friendly. Corner

Rubber Insert for Anti colision/Anti Scratch. Collapsible handrail, Easy Stack & Rupees Eight Thousand

111 50.00 Store & Noiseless Ultra Durable Silicon Wheels Platform Dimension : 900 x 600 8,362.80 Nos Three Hundred SixtyTwo

x 270mm (3 x 2 x 0.8 feet) | Load Capacity : 400 Kgs Ground Clearance : 27 cms Paise Eighty Only

Package Includes 1 Trolley , 2 360 Turn swivel Wheels , 2 Fixed Wheels , Nuts &

Bolts , 1 Spanner included.

Qty Item of Work In Rupees Unit Amount In Words

Providing and Laying Crane 500 kg to 1,200 kg compact mobile

hydraulic/electric floor crane at the inner boom position, with at least 600 kg at

first extension and 300 kg at full extension. Minimum hook height 960 mm,

maximum hook height 3,570 mm. Boom outreach two-stage: 1,280 mm +

mm +610 mm. Machine shall be battery-electric drive 24 V DC with two

V/80–95 Ah lead-acid deep-cycle batteries, built-in charger. Wheels poly-on- Rupees Three Lakh

112 1.00 steel, with directional locking and brake. Structure shall be high strength steel, 3,48,450.00 Nos FourtyEight Thousand

powder coated. The unit shall comply with CE / ISO9001:2000, include overload Four Hundred Fifty Only

protection, dead-man brake, safety latch hook, and be supplied fully

assembled with training. powered drive (electric battery), manual push, or

combined. Battery duration (hours) if applicable. Example: 3–4 hours

continuous, 8 hours intermittent

Providing and Laying Metal Wall Mounted Stabilizer Stand engineered to

provide secure, reliable support for a wide range of equipment. Crafted from

heavy-duty, corrosion-resistant steel, this stabilizer stand ensures long-lasting

strength while maintaining a clean, modern appearance Heavy-duty metal Rupees One Thousand

113 10.00 construction for exceptional strength and durability, Wall-mount design frees 1,045.35 Nos FourtyFive Paise

up floor space and improves safety, Easy installation with pre-drilled mounting ThirtyFive Only

holes The Size of Stabilizer Stand (450mm x 450mm)

PLUMBING FIXTURE : Providing, fixing, jointing and testing in position of

Rupees One Thousand

various Bathroom C.P. Fixtures with hydraulic testing complete as per design,

114 15.00 1,451.88 Nos Four Hundred FiftyOne

drawing and instruction of site incharge. 25mm Dia Control Valve

Paise EightyEight Only

Providing and fixing screw down bib taps of following size. (B) Brass chromium

plated screws down Bib Tap. (i) 15mm dia. Jaquare Opal Prime OPP 15037PM Rupees Two Thousand

Providing and fixing health faucet with 1 m PVC tube and swivel hook including Rupees One Thousand

116 6.00 all fittings complete. (Jaquare Code : ALD-573) 1,585.70 Nos Five Hundred EightyFive

Paise Seventy Only

Providing, fixing, jointing and testing in position of various Bathroom C.P. Rupees Two Thousand

Fixtures (Angle Cock) with hydraulic testing complete as per design, drawing Two Hundred SixtyEight

and instruction of site incharge. Urinal stop cock.(Code : Jaquare CON-1081KN) Paise FourtySix Only

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing white glazed vitreous china wall mounting type (European

type) water closet with C.P. bolts, nuts, C.I. Chair or other hanging

arrangement, white solid plastic seat with lid, C.P. brass hinges and rubber

buffers, Metropole flush valve reguler 40mm size (concealed body) with Rupees Seventeen

exposed shut off provision , C.P. brass screws and washers complete, including Thousand Nine Hundred

cutting and making good the walls floors where required. Wall hung EWC SixtyEight Paise

(Jaquare - VGS-WHT-81953UF), (FLV-1093N - Metropole Flush Valve) & (FLV- FourtyOne Only

1071 - Concealed Flush Valve Complete) matching white plastic seat with lid &

CP brass hinges & CP push plate .

Providing and fixing White glazed vitreous Wash Basin Round Over-Counter,

size 450 mm dia., with supporting in stone flooring, 1 no, 32 mm CP Bottle trap Rupees Five Thousand

119 15.00 with extension piece to wall flange with rubber adopter for waste 5,819.62 Nos Eight Hundred Nineteen

connection,1.2m Flexible Pipe [1No] and waste coupling. Etc complete. Wash Paise SixtyTwo Only

Basin Table Top - 420x420x155 mm (CNS-WHT-905)

Providing & fixing in position 15 mm C.P. brass angle cock of best quality with Rupees Two Thousand

120 10.00 1.2 Rmt Long pvc Tube and accessories with necessary fittings etc. complete. 2,073.53 Nos SeventyThree Paise

(CODE : FLR-5053N) FiftyThree Only

Providing & fixing in position 15 mm C.P. brass pillar cock of best quality with Rupees One Thousand

necessary fittings etc. complete. etc complete as per suggestion of Eight Hundred

121 15.00 Architect/EIC. (Make: Jaquare, Cera, Hindware, Somani) 1,829.11 Nos

TwentyNine Paise Eleven

Providing and fixing TOWEL RING SQUARE , as approved by the architect.Work Rupees One Thousand

122 15.00 complete including all type of fittings , etc complete as per suggestion of 1,024.14 Nos TwentyFour Paise

Architect/EIC. ( Code : ACN-1121BN) Fourteen Only

Providing and fixing Soap Dispenser with Glass Bottle as approved by the Rupees One Thousand

123 15.00 architect.Work complete including all type of fittings , etc complete as per 1,439.25 Nos Four Hundred ThirtyNine

suggestion of Architect/EIC. (Code : ACN-1135N) Paise TwentyFive Only

Providing and fixing smartflow hand dryer, as approved by the architect. Work Rupees Nine Thousand

124 14.00 complete including all type of fittings , etc complete as per suggestion of 9,708.12 Nos Seven Hundred Eight

Architect/EIC. (Code : HDR-SSF-AK2807) Paise Twelve Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

Rupees Five Hundred

with jali of the following nominal diameter of self cleansing design with C.I

125 26.00 571.08 Nos SeventyOne Paise Eight

scread down or hinged grating including the cost of cutting and making good

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing chromium plated, bottle trap with necessary couplings of Rupees Two Hundred

126 15.00 approved quality for wash basin / Sink & Urinal. 295.80 Nos NinetyFive Paise Eighty

Providing and fixing Urinal of approved quality including connection with trap Rupees One Thousand

127 9.00 and with integral longitudinal flush pipe.(A) Squating plate pattern white 1,550.99 Nos Five Hundred Fifty Paise

earthenware 550mm x 300mm. NinetyNine Only

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass Rupees Eight Hundred

128 14.00 mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden 833.73 Each ThirtyThree Paise

pluge with C.P. brass screws and washers. SeventyThree Only

Providing erecting and fixing double coated ISI water tank of required capacity

Rupees Three Paise

129 35000.00 each with all necessary fittings and connection etc. complete on terrace 3.95 Lit

NinetyFive Only

SUB EST-01 (Civil work ,Interior,Furniture and Plumbing Fixure )

WATER BORE : Drilling pilot borehole of size 250/300 mm at above site by mud Rupees Six Hundred

flush direct rotery rig. Paise NinetyFive Only

Reaming of 250/300 mm dia.Pilot borehole to size 550 mm dia. Incliding

Rupees Three Hundred

assembling ,lowering housing ,casing strainerpipers with gravel packing and

131 250.00 366.63 Mtr SixtySix Paise SixtyThree

clayball packing etc.

Development of cach water bearingzone coming across the full depth of

Rupees TwentySeven

tubewell by lowering 100 mm dia.Droplineand 32 mm dia airline for each

Thousand Seven Hundred

132 1.00 water bearing Zone with suitabale capacity air compressar up to avilability of 27,720.46 Job

Twenty Paise FourtySix

sand free discharge. (Lowering of drop line up to 186 mtr)

900 CFM /200 PSI capacity air compressar upto the availability of sand free Rupees TwentySeven

133 1.00 discharge for upto 250 mtrs 27,603.30 LS Thousand Six Hundred

Three Paise Thirty Only

Supply of M.S. E.R.W. plain end medium duty pipe confirming to IS 4270/1992 Rupees Three Thousand

134 250.00 with laatest amendments in random lenth of 4 to 7 mtr. Of size 250 mm dia 3,605.70 Mtr Six Hundred Five Paise

(minmum thicknes of 7.1 mm) Seventy Only

Screen Slotting of MS ERW blank pipe of following size having slot size as

cm x 6.35 cm x 3.12 mm (including unloading of blank pipes from truck &

135 112320.00 0.24 slots Paise TwentyFour Only

reloading slotted pipes into truck). As above having slot size as 6.75 cm x

cm x 1.59 mm. 250 mm dia.

Qty Item of Work In Rupees Unit Amount In Words

Supply of miscellenious bore material suitable to 250 mm dia pipes as

Rupees Two Thousand

following (A) MS Bore clamps made from M.S. plate with 3 holes on either side

136 1.00 2,037.91 Pair ThirtySeven Paise

with nuts & bolts of std make of size 900X100X16 mm flat to 250 mm dia pipe.

Supply of miscellenious bore material suitable to 250 mm dia pipes as

following (B) MS Bore Plug having 100mm height made from M.S. plate with 3 Rupees One Thousand

137 1.00 holes at equal distance on circumferrence for nut-bolts type, locking 1,161.62 No One Hundred SixtyOne

arrrangement with nuts-bolts & lock nuts of std make complete from 5 mm Paise SixtyTwo Only

thick M.S. plate suitable for 250mm dia pipe.

Supply of miscellenious bore material suitable to 250 mm dia pipes as

Rupees One Thousand

138 1.00 following (C) MS Bail Plug having length 0.45 mtr from medium class pipe as 1,065.02 No

SixtyFive Paise Two Only

per I.S.S. suitable for 250 mm dia pipe.

Supply of miscellenious bore material suitable to 250 mm dia pipes as

Rupees NinetyOne Paise

139 168.00 following (D) Steel bent plate suitable for ERW pipe for 250mm dia (size:200 X 91.71 No

SeventyOne Only

Supply of GRAVEL OF selected size 4 mm to 6mm Rupees Two Thousand

140 50.00 2,049.29 Cum FourtyNine Paise

TwentyNine Only

Electrologging of Pilot bore hole with carting. Rupees Eighteen

141 1.00 18,180.00 Job Thousand One Hundred

Geohydrological ground water investigation including water sample chemical Rupees Fourteen

analysis Thousand Four Hundred

TwentyEight Paise

Providing, supplying and commissioning ISI mark CI D/F Reflux Valves of

following class and diameter including all taxes, insurance, transportation, Rupees Five Thousand

143 1.00 freight charges, octroi, inspection charges, loading, unloading, conveyance to 5,401.48 Nos Four Hundred One Paise

departmental stores stacking etc. complete. Reflux valves PN 1 IS 5312 with ISI FourtyEight Only

mark size: 100 mm

Qty Item of Work In Rupees Unit Amount In Words

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type

B) conforming to IS 13592-1992 with one end plain and other end socketed

with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

Rupees Eight Hundred

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

144 200.00 835.15 Rmt. ThirtyFive Paise Fifteen

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center

or shall be concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

Filling of Existing tube well or abandoned bore hole of any size by sticky clay Rupees EightyFive Paise

(with required materials ) EightyFive Only

Lifting of submersible mtor pump set complete with required no & size of

Rupees Two Thousand

casing pipe by means of proper chain pulley block and pipe wrenches. Job per

146 1.00 2,996.67 Nine Hundred NinetySix

includes stacking of pipe chronologically after due checking of threads. (c) job

above 120 meters Paise SixtySeven Only

Percolation well : 1) Boring and Sinking 30 cm. diameter percolation well

reverse rotary drilling system including excavation and refilling mud pit, pre

and post site cleaning etc. complete and thereafter withdrawal and removal of

the Derrick etc. complete. 190mt. depth 2) Supplying, fixing and lowering

cm diameter PVC strainer pipes having slot size 2 mm to suit the size of water

bearing coarse sand to the required depth as per direction of the engineer 3)

Washing and developing the tube well with the air compressor (900 cfm/ 200 Rupees Four Lakh Five

psi) with drop line washing with every water bearing zone upto bottom level Thousand Four Hundred

till sand free water. 4) Making Rain water Harvesting pit 2mtr x 2 mtr x 2.5mtr EightyOne Paise

deep with 35 x 35 cm dry brick honey comb perforated brick work with EightyFour Only

manhole covers etc. complete as per standard design Rate shall be inclusive of

all material, labour, equipment, consumable and all type of filling material like

Graval/ metal/ sand in Rain water Harvesting pit etc as per drawing and as

directed by Engineer in charge.

RCC Hume Pipe : Providing & laying. R.C.C. Hume pipe for cable to be laid

cm. below ground across the road crossing or on floor with necessary material Rupees Three Hundred

148 50.00 in an approved manner and making the ground as per original.(C) 300 mm dia 343.40 Rmt FourtyThree Paise Fourty

SUB EST-02 (Bore Well )

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail Rupees SeventyTwo

piece, adapter (both male and female), reducer (single stage, double stage and Paise SixtyFive Only

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material,

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 15 mm

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

Rupees One Hundred

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail

150 52.00 198.97 Rmt NinetyEight Paise

piece, adapter (both male and female), reducer (single stage, double stage and

NinetySeven Only

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material,

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 20 mm

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail Rupees NinetyOne Paise

151 100.00 piece, adapter (both male and female), reducer (single stage, double stage and 91.84 Rmt

EightyFour Only

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material,

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 25 mm

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

Rupees One Hundred

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail

152 50.00 119.15 Rmt Nineteen Paise Fifteen

piece, adapter (both male and female), reducer (single stage, double stage and

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material,

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 32 mm

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

Rupees One Hundred

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail

153 100.00 148.12 Rmt FourtyEight Paise Twelve

piece, adapter (both male and female), reducer (single stage, double stage and

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material,

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 40 mm

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail Rupees One Hundred

154 100.00 piece, adapter (both male and female), reducer (single stage, double stage and 195.67 Rmt NinetyFive Paise

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, SixtySeven Only

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 50 mm

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail Rupees Six Hundred

155 50.00 piece, adapter (both male and female), reducer (single stage, double stage and 670.64 Rmt Seventy Paise SixtyFour

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, Only

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 65 mm

Providing and fixing, in proper line and level (with necessary support like, brick

masonry pedestals and battens, if necessary) to floor, approved quality, heavy

duty, White UPVC-Schedule 40 Grade as per ASTM D-1785, of Astral or

equivalent, Open & Conceal piping, complete, including jointing with rubbering

and airtight joints, with necessary specials, couplers, elbow, equal tees, tail Rupees Nine Hundred

156 12.00 piece, adapter (both male and female), reducer (single stage, double stage and 929.20 Rmt TwentyNine Paise Twenty

triple stage), end cap, fabricated bend, etc., and lubricant or jointing material, Only

including testing, cutting, making good the wall, ceiling and floor etc. Testing &

installation of pipe lines as per drawing & specification. 80 mm

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water

Rupees Two Hundred

157 300.00 of following dia. nominal bore tube fittings and clamps including making good 205.00 Rmt

the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot

Water & RO Water 20 mm

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water Rupees Two Hundred

158 100.00 of following dia. nominal bore tube fittings and clamps including making good 249.72 Rmt FourtyNine Paise

the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot SeventyTwo Only

Water & RO Water 25 mm

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water Rupees Three Hundred

159 100.00 of following dia. nominal bore tube fittings and clamps including making good 333.66 Rmt ThirtyThree Paise SixtySix

the wall, ceiling and floor etc. complete. All Conceal Pipe line Cold & Hot Only

Water & RO Water 32 mm

Qty Item of Work In Rupees Unit Amount In Words

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL

VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts,

Rupees Nine Hundred

160 5.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 909.00 Nos.

charge for water supply lines of the following Nominal bore (NB) size: 15 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL

VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts,

Rupees One Thousand

161 5.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 1,212.00 Nos.

Two Hundred Twelve Only

charge for water supply lines of the following Nominal bore (NB) size 20 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL

VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts, Rupees One Thousand

162 30.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 1,818.00 Nos. Eight Hundred Eighteen

charge for water supply lines of the following Nominal bore (NB) size 25 mm Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL

Rupees Two Thousand

VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts,

163 10.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 2,777.50 Nos.

SeventySeven Paise Fifty

charge for water supply lines of the following Nominal bore (NB) size 32 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL

VALVE / OR WHEEL valves of approved make, including flanges / unions, nuts, Rupees Three Thousand

164 10.00 bolts, washers, etc. complete, as approved by the Architect and Engineer-in- 3,595.60 Nos. Five Hundred NinetyFive

charge for water supply lines of the following Nominal bore (NB) size 40 mm Paise Sixty Only

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non

return valve confirming to IS 778, with screwed / flanged ends, 20 Kg/m2 of Rupees Two Thousand

165 1.00 approved make, on water supply lines of the following Nominal bore (NB) size: 2,828.00 Nos. Eight Hundred

65 mm TwentyEight Only

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non

return valve confirming to IS 778, with screwed / flanged ends, 20 Kg/m2 of Rupees Three Thousand

166 2.00 approved make, on water supply lines of the following Nominal bore (NB) size: 3,030.00 Nos.

Qty Item of Work In Rupees Unit Amount In Words

INTERNAL DRAINAGE

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes -

Ring Fit & Self Fit, Supreme or equivalent make, Confirming to IS 13592 &

Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and

double), including plugs, shoes, cowls, flange compression type fittings, wall Rupees Eight Hundred

167 150.00 clips, in proper line and level with necessary support like brackets/clamps, 831.22 Rmt ThirtyOne Paise

clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, TwentyTwo Only

open or concealed complete jointing with rubberising and airtight joints, with

‘T’ shaped rubber ring, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor, etc. Testing & installation of

pipe lines as per drawing & specification. 160 mm.(Soil + Waste + Rain Water) -

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes -

Ring Fit & Self Fit, Supreme or equivalent make, Confirming to IS 13592 &

Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and

double), including plugs, shoes, cowls, flange compression type fittings, wall

clips, in proper line and level with necessary support like brackets/clamps, Rupees Eight Hundred

168 600.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, 835.15 Rmt ThirtyFive Paise Fifteen

open or concealed complete jointing with rubberising and airtight joints, with Only

‘T’ shaped rubber ring, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor, etc. Testing & installation of

pipe lines as per drawing & specification 110 mm. (Soil + Waste + Rain Water)

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes -

Ring Fit & Self Fit, Supreme or equivalent make, Confirming to IS 13592 &

Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and

double), including plugs, shoes, cowls, flange compression type fittings, wall

clips, in proper line and level with necessary support like brackets/clamps, Rupees Two Hundred

169 100.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, 277.43 Rmt SeventySeven Paise

open or concealed complete jointing with rubberising and airtight joints, with FourtyThree Only

‘T’ shaped rubber ring, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor, etc. Testing & installation of

pipe lines as per drawing & specification 75 mm. - Balcony + Standing Balcony

+ AC Drain - PVC 10 KG

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes -

Ring Fit & Self Fit, Supreme or equivalent make, Confirming to IS 13592 &

Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and

double), including plugs, shoes, cowls, flange compression type fittings, wall

clips, in proper line and level with necessary support like brackets/clamps, Rupees One Hundred

170 10.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, 125.67 Rmt TwentyFive Paise

open or concealed complete jointing with rubberising and airtight joints, with SixtySeven Only

‘T’ shaped rubber ring, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor, etc. Testing & installation of

pipe lines as per drawing & specification 40 mm for waste water for Sink - PVC

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing Approved SWR Type B quality, heavy duty, UPVC pipes -

Ring Fit & Self Fit, Supreme or equivalent make, Confirming to IS 13592 &

Fitting confirming to IS 14735 for waste water or soil waste pipe, with

necessary specials, bends, such as `Y' junction, `T' junction (both single and

double), including plugs, shoes, cowls, flange compression type fittings, wall

clips, in proper line and level with necessary support like brackets/clamps, Rupees One Hundred

171 35.00 clips, RCC or brick pedestals or battens, if necessary, to wall, ceiling and floor, 117.56 Rmt Seventeen Paise FiftySix

open or concealed complete jointing with rubberising and airtight joints, with Only

‘T’ shaped rubber ring, etc., and lubricant or jointing material, including testing,

cutting, making good the wall, ceiling and floor, etc. Testing & installation of

pipe lines as per drawing & specification 32 mm for waste water for Wash

basin - PVC 10 KG

Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of

self cleansing design with water seal not less than 50 mm., with or without

vent, cutting chases / hole in floors / slabs and bringing the same in proper Rupees Nine Hundred

172 50.00 condition and shape after placing the trap in right position in case of 929.20 Nos TwentyNine Paise Twenty

suspended / open plumbing or setting the trap in 1:2:4 CC in case of concealed Only

plumbing , etc. complete, as required. The trap shall be 'P' type, of following

sizes: 110 x 110 mm OD inlet / outlet

Providing and fixing Heavy class S.S. grating with Mosquito proof S.S.

strainer of Chilly or equivalent make, as approved, (cockroach trap) including Rupees Nine Hundred

173 50.00 setting in floor with cement mortor to match with floor finish as per architect 909.00 Nos

Providing and fixing, PVC cowl, on C.I / PVC ventilating pipes and verticals for Rupees Five Hundred

174 28.00 soil, waste and rain water Pipes at top level / terrace level, as specified and 501.87 Each One Paise EightySeven

required, etc. complete. 110 OD PIPE Only

Providing and fixing, PVC cowl, on C.I / PVC ventilating pipes and verticals for Rupees Three Hundred

175 5.00 soil, waste and rain water Pipes at top level / terrace level, as specified and 389.74 Each EightyNine Paise

required, etc. complete. 75 OD PIPE. SeventyFour Only

EXTERNAL DRAINAGE

Providing laying (to level or slopes) and jointing reinforced concrete Light duty Rupees Three Hundred

176 100.00 non-pressure pipes I.S., class NP2 of the following internal diameter with 348.04 Rmt FourtyEight Paise Four

collars and butt ends prepared for collar joints including testing, of joints Only

complete. 250mm

Qty Item of Work In Rupees Unit Amount In Words

Providing laying (to level or slopes) and jointing reinforced concrete Light duty

non-pressure pipes I.S., class NP2 of the following internal diameter with Rupees Two Hundred

177 20.00 collars and butt ends prepared for collar joints including testing, of joints 248.67 Rmt FourtyEight Paise

complete 150 mm SixtySeven Only

Providing, fixing, jointing and testing salt glazed stoneware Gully trap, class `A',

including excavation in all soil types, bailing or pumping out water from

trenches, shoring whenever necessary testing,refilling, in layers ramming &

consolidation, removing away the surplus earth & spoils, dumping it on site or

carting away to lead of 100 meters as directed, incl. embedding the trap in CC

1:2:4, construction of brick masonry chamber, internal clear size 300 mm. x

mm., in brick work 230 mm. thick, in CM 1:4, plastering inside, outside and all Rupees One Thousand

178 10.00 exposed surfaces with CM 1:3, 12 mm. thick, with 300 x 300mm Gully trap 1,292.19 Each Two Hundred NinetyTwo

chamber & providing, fixing CI frame and cover 300 x 300 mm., weighing Paise Nineteen Only

together not less than 12.5 Kg., painting of all CI items with 3 coats of approved

bitumastic paint, etc. Complete.of the following diameter size:

salt glazed stoneware gully trap, class `A', of 150 mm. dia. inlet and 150 mm.

Providing, fixing, jointing and testing salt glazed stoneware Gully trap, class `A',

including excavation in all soil types, bailing or pumping out water from

trenches, shoring whenever necessary testing,refilling, in layers ramming &

consolidation, removing away the surplus earth & spoils, dumping it on site or

carting away to lead of 100 meters as directed, incl. embedding the trap in CC

1:2:4, construction of brick masonry chamber, internal clear size 300 mm. x 300 Rupees Four Hundred

179 10.00 mm., in brick work 230 mm. thick, in CM 1:4, plastering inside, outside and all 496.72 Each NinetySix Paise

exposed surfaces with CM 1:3, 12 mm. thick, with 300 x 300mm Gully trap SeventyTwo Only

chamber & providing, fixing CI frame and cover 300 x 300 mm., weighing

together not less than 12.5 Kg., painting of all CI items with 3 coats of approved

bitumastic paint, etc. Complete.of the following diameter size: Cast iron

Qty Item of Work In Rupees Unit Amount In Words

Providing, fixing, jointing and testing salt glazed stoneware Gully trap, class `A',

including excavation in all soil types, bailing or pumping out water from

trenches, shoring whenever necessary testing,refilling, in layers ramming &

consolidation, removing away the surplus earth & spoils, dumping it on site or

carting away to lead of 100 meters as directed, incl. embedding the trap in CC

1:2:4, construction of brick masonry chamber, internal clear size 300 mm. x 300 Rupees Two Thousand

180 10.00 mm., in brick work 230 mm. thick, in CM 1:4, plastering inside, outside and all 2,017.19 Each Seventeen Paise Nineteen

exposed surfaces with CM 1:3, 12 mm. thick, with 300 x 300mm Gully trap Only

chamber & providing, fixing CI frame and cover 300 x 300 mm., weighing

together not less than 12.5 Kg., painting of all CI items with 3 coats of approved

bitumastic paint, etc. Complete.of the following diameter size: Gully trap

Brick chamber 300 x 300 x

Constructing Inspection chamber 450 x450 x 600 mm clear size in 230 mm

thick brick masonry with cement mortar (1:5) as per ISI with 150 mm thick

1:3:6 P.C.C. bedding, necessary benching in concrete (M-15) and 20 mm thick

smooth cement plaster (1:4) from inside, C.I. steps as necessary and rough Rupees Two Thousand

181 4.00 cement plaster 20 mm thick in c.m. 1:4 outside, with 50 kg. Full size C.I. 2,545.86 Each Five Hundred FourtyFive

manhole cover and frame (Approved Make) including all excavation in all soil Paise EightySix Only

types, refilling sides in layers with selected earth ramming and consolidating,

removing away surplus soil or dumping it on site as directed (Depth upto

Extra over and above item no. beyond 1.5 m. depth, for every additional Rupees Three Hundred

182 4.00 depth of 0.1 m. or part thereof, for brick masonry Inspection chamber. 325.59 Each TwentyFive Paise

Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35Kg/ Cm2 in

C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1- Rupees Seven Thousand

183 2.00 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation 7,180.44 Each One Hundred Eighty Paise

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished FourtyFour Only

smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for pipe

lines with three or more inlets.

Qty Item of Work In Rupees Unit Amount In Words

Providing and fixing CI Cover manhole frame and cover 455 x 610, light /

medium / heavy weight,Circular / rectangular tested as per IS:1726 for load

Rupees Nine Hundred

bearing.The cover is to be provided with a 5mm thick high abrasion

184 2.00 965.49 Each SixtyFive Paise FourtyNine

surface.The cover is to be of double seal type with SS 316 Socket type key hole

lifting / Rod lifting arrangement . The lifting arrangement is to be closed from

the bottom side. etc. complete as directed by E-I-C.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside

plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand)

finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm Rupees Eleven Thousand

185 4.00 nominal size) finished smooth complete including curing and festing (i) Inside 11,029.97 Each TwentyNine Paise

size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size NinetySeven Only

560mm diameter total weight of cover and frame to be not less than 128 kgs.

(Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of

brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm.

in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)(1) A type depth 0.90 Metre

for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. Rupees Five Hundred

186 2.00 or Part thereof over item No.24.27 (I) for depth from 0.9M to 1.5M. 522.96 Each TwentyTwo Paise

Rupees One Lakh

S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase

Seventeen Thousand Five

187 1.00 motor capacity about 50-55 H.P discharge capacity having . Lifting and 1,17,502.39 NO

Hundred Two Paise

Lowering taken extra. (A) ( 13 Stage) 100 to 400 L.P.M. discharge at the head

ThirtyNine Only

182 to 265 mtrs. suitable for 80 mm dia. Delivery pipe Cat.III

Qty Item of Work In Rupees Unit Amount In Words

Installing, testing and commissioing of Pump system comprising of horizontal

Submersible Pumps with SS casing, SS impeller, SS Shaft and driven by 415 V

AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be supplied

with all accessories viz., base plate, coupling, motor, VFD based control panel,

dry run & overload protection, cabling up to panel, earthing, GI medium duty Rupees Fifty Thousand

suction, delivery & header pipes, pressure gauge, pressure switches, pressure Five Hundred Only

transmitter, suction ball valves & delivery ball valves & check valves etc.,

complete. 200 lpm., 40mtr., (To GROUND FLOOR TO TERRACE TANK) FOR

Supply, installation, testing & commissioning of Water level controller for the

Rupees Ten Thousand

189 1.00 OH tanks with switches, hardwares, interlocking with panel, etc. For Under 10,100.00 SET

One Hundred Only

Ground tank & OH Tank

Percolation well - 200 Dia Bore well Pipe with Approx 300 Feet Depth as per Rupees Seven Lakh

190 1.00 site condition, Chamber require 6' x 6' x 8' depth with Rain Water filtration 7,57,500.00 SET FiftySeven Thousand Five

system Hundred Only

Final size and prize as per vendor & site condition AUTO TYPE SOFTENER Rupees One Lakh One

DEVICE WITH SALT TANK, AUTO SYSTEM 6000 LPH Thousand Only

SUB EST-03 (Plumbing Work )

Qty Item of Work In Rupees Unit Amount In Words

Electric Motor Driven Hydrant Pump

Supplying,Installing, testing and commissioning of Fire authority approved

Electrical driven fire pump suitable for automatic/ manual operation consisting

of the following-Rates for erection of pump only Horizontal split casing, high

pressure, single/ multistage centrifugal type fire pump having cast iron body,

bronze impeller,stainless steel shaft & capable of delivering 1680 LPM against

a total head of 70Mtr while running at 2900 RPM complete with proper

connection to suction and delivery line, and including bypass arrangement for

testing of pumps as per the requirement. Suitable mechanical seal with

mounting aggangement shall be included, having a name plate indicating

suction, delivery, head, discharge, stages, RPM and direction of rotation. Y

Stainers at pump input shall be provided as per manufacturer requirements.

Pump shall be capable of furnishing not less than 150% of rated capacity at a Rupees Two Lakh

192 1.00 head not less than 65 % of rated head. The shut off head shall not exceed 120% 2,47,450.00 set FourtySeven Thousand

of rated head. Squirrel cage, induction motor, TEFC type suitable for 415 + Four Hundred Fifty Only

10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating for the above pump with

synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F'

insulation. The motor shall conform to IS 325 1978 (up to date) with flexible

coupling and coupling guard . Factory Fabricated Common base plate for

mounting pump and motor fabricated of mild steel channel as per

manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos.,

heavy duty). Grouting bolts to be provided and installed by vendor at his cost

Flexible Coupling and coupling guard for direct coupling of pump and motor.

Drain Pipe with Valve Main Fire Pump Discharge : 1680 LPM Pumping Head :

70 M Pump Size : 50 HP Rate should included interconnection cables and

Cable box if reqd for cable conn. to motor.

Qty Item of Work In Rupees Unit Amount In Words

Electrical Motor Driven Jockey Pump

Supplying,Installing, testing & commissioning of fire authority approved

electrically driven Jockey pump suitable for automatic/manual operation

consisting of the following: Horizontal / Vertical mounted multistage jockey

pump having cast iron body, S.S. impeller, stainless shaft with mechanical seal

capable of delivering 180 LPM against total head of 32Mtr while running at

1500 RPM complete. The system shall be complete with necessary pressure

gauge with gun metal shut off cock on delivery side including bypass

arrangement for testing of working of the pumping set as required. The pump

should meet the requirement of IS 15105:2002 and must be approved by the

local fire authority. Y-Stainers at pump input shall be provided as per

manufacturer requirements. Squirrel cage induction motor suitable for 415 + Rupees SeventyTwo

193 1.00 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump with 72,720.00 set Thousand Seven Hundred

synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible Twenty Only

coupling and coupling guard . Factory fabricated Common base plate for

mounting pump and motor fabricated of mild steel channel as per

manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration

pads.(Cushy foot) . grouting bolts to be provided and installed by the vendor at

his cost Suitable reinforced cement concrete pump foundations as per

manufacturer's design including foundation bolts, washers as required.

Drain pipe with valve (25 mm dia) Jockey Pump :- Discharge :180 LPM

Pumping Head : 32 MTR Pump Size : 10 HP Rate shall include inter

connecting cables and cable box if reqd for cable conn to motor

Qty Item of Work In Rupees Unit Amount In Words

Diesel Fire Pump

Supplying, Installation, Testing and commissioning of Diesel engine driven fire

pump suitable for automatic operation and consisting of following: Horizontal

type, centrifugal End Suction pump of cast iron body & bronze impeller

mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at highest

and farthest outlet at specified flow of 137 m3/Hour@ 70M. head conforming

to IS 1520. with M.S.fabricated common base plate, coupling, coupling guard, Rupees Four Lakh Four

foundation bolts etc. as required. Thousand Only

Diesel Fire Pump

Discharge : 1680 LPM

Pumping Head : 70 M

Pump Size : 50 HP

Fire pump panel (Combined for All Pumps) and electrical works - Starter panel

with star delta or as per CFO approved starters rated to suite pump HP with

necessary protection feautres like SPP / ELR / OL / SC / phase and on off

indicating lamps. The busbars shall be of Al - 0.8 A / sq mm size. Panel shall be

fabricated from 14G sheet steel with seven tank process powder coated and

shall be min IP 52. Panel shall have Ammeter / Voltmeter and KWh meter.

Cabling / earthing from panel to pump shall be scope of vendor without any

extra cost. Cabling - supply / laying and terminating, shall be Al XLPE

Rupees Two Lakh

armoured / Cu XLPE armoured / as per manufacturers specifications with

195 1.00 2,22,200.00 Each TwentyTwo Thousand

necessary terminal box to terminate the cables. Panel shall be rated min for

Two Hundred Only

25KA fault level. Cable trays - hot dip GI ladder type 16 gauge with required

supports shall be used for cabling. Panel shall have one incomer MCCB / ACB of

required rating where by incoming supply and earthing shall be terminated by

electrical contractor.Starters shall be suitable for respective motors.panel to

take inputs from pressure switch/on-off switch . Flow switch wiring shall be

in suitable mms pvc consuits. Panel should be manufactured by CPRI approved

Qty Item of Work In Rupees Unit Amount In Words

Providing complete fire fighting liaisoning services for the project, including

preparation, submission, and follow-up of all required drawings, calculations,

test reports, and statutory documents with the concerned Gujarat State

Government authorities such as the Fire Department, Chief Fire Officer (CFO),

and other competent bodies. The scope includes coordination for fire NOC

approvals, site inspections, compliance with Gujarat Fire Safety Regulations, Rupees Two Lakh Two

NBC norms, and applicable IS standards, attending meetings, addressing Thousand Only

observations raised by authorities, and obtaining final fire safety clearance and

NOC for occupancy, complete in all respects as per government requirements

and project specifications.

Supplying,Installing, testing & commissioning of dial type Pressure Guage Rupees Two Thousand

197 2.00 having 100 mm dial & range of 0-15 Kg/cm2 with syphon and cock. 2,151.30 Each One Hundred FiftyOne

Paise Thirty Only

Supplying,Installing, testing & commissioning of Pressure Switch required Rupees Two Thousand

accessories Twenty Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with

Rupees Four Thousand

s.s seat duly lSI marked complete with Nuts, Bolts, washers, gaskets,

199 1.00 4,848.00 Each Eight Hundred

confirming to IS 13095, of following sizes as required.a.150 mm dia

FourtyEight Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with Rupees Four Thousand

200 6.00 s.s seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, 4,646.00 Each Six Hundred FourtySix

confirming to IS 13095, of following sizes as required. b.100 mm dia Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with Rupees Three Thousand

201 1.00 s.s seat duly lSI marked complete with Nuts, Bolts, washers, gaskets, 3,838.00 Each Eight Hundred ThirtyEight

confirming to IS 13095, of following sizes as required. c.65 mm dia Only

Supplying,Installing, testing & commissioning of CI dual plate non-return valve Rupees Five Thousand

202 1.00 of following sizes conforming to IS: 5312 complete with rubber gasket, GI bolts, 5,252.00 Each Two Hundred FiftyTwo

nuts, washers etc. as required.a.150 mm dia. Only

Supplying,Installing, testing & commissioning of CI dual plate non-return valve Rupees Four Thousand

203 1.00 of following sizes conforming to IS: 5312 complete with rubber gasket, GI bolts, 4,141.00 Each One Hundred FourtyOne

nuts, washers etc. as required. b.65 mm dia Only

Qty Item of Work In Rupees Unit Amount In Words

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees Rupees One Thousand

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on Four Hundred

the surface including painting with two coats of anticorrosive primer and two TwentyFour Paise Ten

coats of approved red enamel paint after laying and testing after Installation Only

etc. as per specifications complete as required. 150 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

Rupees One Thousand

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on

205 254.00 1,232.20 Mtr. Two Hundred ThirtyTwo

the surface including painting with two coats of anticorrosive primer and two

Paise Twenty Only

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required. 100 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

Rupees Nine Hundred

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on

206 94.00 949.40 Mtr. FourtyNine Paise Fourty

the surface including painting with two coats of anticorrosive primer and two

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required 80 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on Rupees Seven Hundred

the surface including painting with two coats of anticorrosive primer and two Seventeen Paise Ten Only

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required 65 mm

Qty Item of Work In Rupees Unit Amount In Words

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

Rupees Five Hundred

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on

208 84.00 585.80 Mtr. EightyFive Paise Eighty

the surface including painting with two coats of anticorrosive primer and two

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required 50 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

Rupees Four Hundred

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on

209 60.00 494.90 Mtr. NinetyFour Paise Ninety

the surface including painting with two coats of anticorrosive primer and two

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required 40 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

Rupees Four Hundred

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on

210 101.00 449.45 Mtr. FourtyNine Paise

the surface including painting with two coats of anticorrosive primer and two

FourtyFive Only

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required 32 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange

jointed / screwed / welded, M.S. Pipes of Class C (Medium class) ISI marked

including accessories such as MS bracket, U clamps with Anchor fasteners, tees

/ elbows / reducers / couplings / unions / bends / flanges etc., and laying on Rupees Two Hundred

the surface including painting with two coats of anticorrosive primer and two FiftyTwo Paise Fifty Only

coats of approved red enamel paint after laying and testing after Installation

etc. as per specifications complete as required 25 mm

Qty Item of Work In Rupees Unit Amount In Words

Supplying,Installing, testing & commissioning of Weather proof standard fire

hose cabinet (750 mm x 600 mm x 300 mm deep) made out of 16 SWG powder

coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) Rupees Five Thousand

212 1.00 shutter including necessary locking arrangement by allen key, stove enamelled 5,151.00 Each One Hundred FiftyOne

Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, Only

suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe &

nozzle spanner (For External Hydrant).

Supply, Installation, Testing and Commissioning of Weather proof Standard

Fire Hose Cabinet wall mounting type (450 mm x 600 mm x 250 mm deep) Rupees One Thousand

213 6.00 having single or double opening with necessary locking arrangement by allan 1,818.00 Each Eight Hundred Eighteen

key suitable for housing 1 nos. hose pipe, 1 no. Branch pipe & nozzle spanner. Only

Supply ,installation, testing and commissioning S.S. Single Headed Fire

Hydrant Valve with 80mm N.B. flanged inlet, 63 mm dia female instantaneous

outlet type. S.S. coupling, blankcap, chain, twist release type lug & all Rupees Three Thousand

214 6.00 accessories Conforming to IS:5290. Including fixing with supports, flanged 3,030.00 Each

tapping from wet riser,orifice plate complete as required by the Local Fire

Supply, installation, testing and commissioning non-percolating rubber

Rupees Three Thousand

reinforced lined fire Hose pipe (as per IS:903) of 63 mm dia and 15 mtrs long.

215 6.00 3,232.00 Each Two Hundred ThirtyTwo

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous Rupees Eight Hundred

pattern aluminium short branch pipe Eight Only

Supply, installation, testing and commissioning of First Aid Hose Reel

equipment conforming to IS:884 comprising of hose reel drum, 8 mm shut off Rupees Four Thousand

217 6.00 nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, 4,141.00 Each One Hundred FourtyOne

painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. Only

complete as required by Local Fire Authority.

Supply, installation, testing and commissioning of SS Ball Valve. Rupees Eight Hundred

(a) 25mm dia Eight Only

Supply, installation, testing and commissioning of Cast lron Four Way Fire Rupees Four Thousand

219 1.00 Brigade Inlet as per IS:904 having 63 mm dia inlet with blank cap and chain 4,848.00 Each Eight Hundred

with necessary fittings, flanges, nut bolts etc. complete as required. FourtyEight Only

Qty Item of Work In Rupees Unit Amount In Words

Supply, Installation, Testing and Commissioning of Gun Metal Air Release

Rupees Three Thousand

Valve with necessary fittings. Size: 25 mm (For Riser)

220 1.00 3,535.00 Each Five Hundred ThirtyFive

Supply, Installation, Testing and commissioning of Quartzoid Bulb type

Rupees Three Hundred

221 413.00 Sprinkler Heads. (a) Pendent Sprinkler 57°C - standard response 353.50 Each

FiftyThree Paise Fifty Only

Supply, installation, testing and commissioning of ABC type Fire Extinguisher Rupees One Thousand

of 6.0 kg confirm to IS:15683, with ISI marked / TAC approved fitted with Four Hundred

required accessories including wall suspension brackets. TwentyFour Paise Ten

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type

Rupees Three Thousand

Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved

223 5.00 3,838.00 Each Eight Hundred ThirtyEight

fitted with required accessories including wall suspension brackets.

Supplying,Installing, testing & commissioning of fire alarm and pump trigger

Rupees Six Hundred Six

224 5.00 system as per requirement and specification consisting of following items. 605.99 Each

Pump On / Off switch:

Supplying,Installing, testing & commissioning of fire alarm and pump trigger

Rupees Seven Hundred

225 5.00 system as per requirement and specification consisting of following items. 757.50 Each

FiftySeven Paise Fifty Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger

Rupees Five Hundred

226 5.00 system as per requirement and specification consisting of following items. 505.00 Each

Pump On / Off switch:

Supplying,Installing, testing & commissioning of fire alarm and pump trigger

Rupees Thirty Paise

227 60.00 system as per requirement and specification consisting of following items. 4 30.30 MTR

core 1.5 sq.mm cu. Flexinble wire

Providing and fixing M.S. structural work fabricated from standard sections,

(MS rounds, angles, channels etc.) including cutting to size, drilling, welding,

including cost of fasteners, clamps in RCC structural members as directed, Rupees One Hundred Six

including two or more coats of synthetic paint over one coat of primer after Paise Five Only

surface preparation including cutting and making good walls (Structural other

than pipe supoort).

Painting of above ground lines with two coats of red oxide primer and two coat Rupees Seven Hundred

of sinthetic enamal paint (PO.Red) Seven Only

Qty Item of Work In Rupees Unit Amount In Words

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes:

Rupees Two Hundred

230 20.00 Fire lift size: 4" X 12" 252.50 Each

FiftyTwo Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes:

Rupees One Hundred

231 20.00 "DCP" Extinguisher: 8" X 4" 151.50 Each

FiftyOne Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: In

Rupees Three Hundred

232 10.00 case of Fire, do not use lift, use staircase: 8" x 8" 353.50 Each

FiftyThree Paise Fifty Only

SUB EST-04 (Fire Fighting )

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting base Rupees Four Hundred

233 207.00 frame covered with textured/metallic/white front plate modules erected on / 582.77 EightyFive Paise

in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / EightyOne Only

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth

continuity and necessary connection with primary light with accessories Rupees One Hundred

234 487.00 erected on Metal / PVC / wooden box covered with 3 mm thick 200.99 SixtySeven Paise SixtySix

PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with necessary Only

Lamp holder / ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Qty Item of Work In Rupees Unit Amount In Words

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC /

Rupees Six Hundred

Metallic/Wooden box, single mounting base frame covered with textured / Poin

235 11.00 725.18 Three Paise NinetyEight

metallic/white front plate modules erected on / in wall / ceiling as per pipe t

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector

as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch and hum free EME step type electronic fan regulator mounted and

accessories with earth continuity of following type erected on PVC / Rupees Six Hundred

236 124.00 Metallic/Wooden box, single mounting base frame covered with 809.01 SeventyFour Paise

textured/metallic/white front plate modules erected on / in wall / ceiling as SixtyEight Only

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe Poin Rupees Five Hundred Ten

237 76.00 erected with following type of accessories. 612.06

t Paise Five Only

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby

switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Qty Item of Work In Rupees Unit Amount In Words

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

Rupees Seven Hundred

appropriate front plate modules erected on / in wall / ceiling as per pipe Poin

238 98.00 894.86 FourtyFive Paise

erected with following type of accessories t

ThirtyEight Only

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe Rupees Eight Hundred

239 8.00 erected with following type of accessories 1,046.36 SeventyOne Paise

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm SixtyThree Only

( green) earthing wire from mcb d b board..

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Cat-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame Rupees Two Hundred

240 96.00 covered with textured / metallic/white front plate modules erected on / in 309.06 FiftySeven Paise FiftyFive

wall / ceiling with following type accessories. Cat-III Only

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

Rupees One Hundred

241 2.00 metallic/white front plate , modules erected with necessary connections as 160.59 Each

Sixty Paise FiftyNine Only

per site situation directed by Engineer In charge

(4) TV Co-axial Socket outlet Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as Rupees TwentyFive Paise

per site situation directed by Engineer In charge. TwentyFive Only

(7) Blank Plate Single Cat.III

Qty Item of Work In Rupees Unit Amount In Words

Providing & erecting Switch board for Computer or electric apparatus

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary Rupees One Thousand

243 13.00 connections as directed 1,133.22 Each One Hundred ThirtyThree

1 no. 6A/16A universal plug-switch combined. Paise TwentyTwo Only

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following Rupees ThirtyThree Paise

dia of pipes, in approved manner as directed. ThirtyThree Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following Rupees SixtyTwo Paise

size SixtyTwo Only

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

Rupees EightyTwo Paise

246 2950.00 PVC insulated stranded wire of green colour for earth continuity of following 104.03 Mtr.

(A) With medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded Rupees One Hundred

wire of green colour for earth continuity of following size . (A) with medium Twelve Paise Eleven Only

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Qty Item of Work In Rupees Unit Amount In Words

Providing & erecting insulated socket 3P+N+E with Plug 32A rating which is Rupees Two Thousand

248 10.00 comprised of Four pole MCB slot and insulated socket IP40 cat-III 2,190.69 Each One Hundred Ninety

Paise SixtyNine Only

Lighting Fixtures ,Fan & other items

Providing and erecting decorative wall bracket fittings complete with LED lamp

and rust free fittings components mounted in chrome finish housing with Rupees One Thousand

249 3.00 holder ,clear/opaque glass diffuser complete erected with lead wires with 1,712.96 Each Seven Hundred Twelve

minimum 15 wattage capacity as per instruction engineer Paise NinetySix Only

incharge/architect/authority .cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Two Hundred

250 40.00 LED driver efficiency > 85 % 220.18 Each Twenty Paise Eighteen

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Only

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KV KV KV cat-III

Qty Item of Work In Rupees Unit Amount In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Rupees Four Hundred

Luminaire efficacy> 85 lumens/watt

251 40.00 427.23 Each TwentySeven Paise

LED driver efficiency > 85 %

TwentyThree Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV KV cat-III

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Five Hundred

252 222.00 LED driver efficiency > 85 % 758.51 Each EightyNine Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have EightyFour Only

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

Square/ Circular shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20

(iii) 16-20 watts, Surge-2 KV cat-III

Qty Item of Work In Rupees Unit Amount In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Rupees One Thousand

Luminaire efficacy> 85 lumens/watt , Seven Hundred

253 375.00 LED driver efficiency > 85 % 1,794.77 Each

NinetyFour Paise

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have SeventySeven Only

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

LED Panel Light with provision for Plane front frame with translucent cover

fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV cat-III

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

Rupees Six Thousand Five

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

254 25.00 5,581.26 Each Hundred SixtySix Paise

fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (iv) above 90 to 120 watts

Providing & erecting Approved make Ceiling Fan with double ball bearing with

Condenser 230 volt A.C.50 Hz. 900 mm sweep complete having 3 Aluminium Rupees One Thousand

255 2.00 blades, canopy erected complete. [ Make shall be approved by Engineer in 1,982.63 Each Nine Hundred EightyTwo

Charge] Paise SixtyThree Only

Qty Item of Work In Rupees Unit Amount In Words

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm Rupees One Thousand

256 122.00 sweep complete having 3blades with aluminium blades with , canopy & 30 cm. 1,948.29 Each Nine Hundred FourtyEight

down rod erected with earthing.(Make shall be approved by Engineer in Paise TwentyNine Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the

RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. Rupees One Hundred

257 124.00 box / Heavy Duty PVC box complete erected concealed in Ceiling with 108.07 Each

Eight Paise Seven Only

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan Rupees Eighteen Paise

box. Eighteen Only

Supplying & erecting approved make low noise decorative exhaust fan having Rupees One Thousand

259 37.00 square frame ABS body with inbuilt lowers & square frame.For 200mm with 1,366.53 Each Seven Hundred Three

1350 RPM cat-ii Paise EightySeven Only

Street Light poles

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr. Rupees Three Thousand

260 25.00 Long duly painted with two coats of aluminium paint complete with metallic 3,225.94 Each Two Hundred TwentyFive

base plate of 300 mm x 300 mm x 4mm thick for using as a compound light Paise NinetyFour Only

pole with approx. weight 32 Kg.

Supplying & erecting approved make SMC press moulded composite FRP.

loop-in, loop-out approx. 2mm thick box complete with Bakelite connector

strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per Rupees Eight Hundred

261 25.00 requirement having locking arrangements with mounting clamp with nuts, 898.90 Each NinetyEight Paise Ninety

bolts & washers suitable for erection on pole with cable clamps& earth bolt of Only

following size of box.

(A) 300mm x 200mm x 100mm [deep]

Providing and erecting street light pole bracket comprising main B Class GI pipe

of 4.2 cm/require outside dia. complete with suitable B Class G.I sleeve tubing

of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole

top having sufficient fasteners for fixing the brackets and having spread of

mtr. length with suitable rise as per site condition & suitable welded stiffener Rupees Six Hundred

reducer and nipple with check nut complete painted with one coat of Red Fourteen Paise Eight Only

oxide / PU base primer and two coats of Aluminium / PU paint. paint with

following nos of arms.

[a] Single Arm bracket 1 Mtr

Qty Item of Work In Rupees Unit Amount In Words

Panel & Switchgear

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating Rupees Six Thousand One

263 5.00 up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on 6,790.23 Each Hundred SeventyThree

A.C. supply 50 c/s. with all internal connections, spreader tinned copper & Paise Twelve Only

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit

breaker having breaking capacity ICU of 35 KA. at 415 V. having Normal current

rating 200A.with variable Thermal & magnetic release suitable to work on Rupees Sixteen Thousand

264 6.00 A.C.supply 50 c/s. with all internal connections, spreader tinned copper & 17,843.67 Each Two Hundred TwentyOne

complete erected in existing 16 G.M.S.housing. ICS=100% of ICU only Cat III Paise SixtyOne Only

Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 50 KA and above at 415 V having Normal Rupees TwentyFive

current rating 400A. with variable Thermal & magnetic release suitable to Thousand Two Hundred

265 1.00 work on A.C.supply 50 c/s. With all internal connections, spreader tinned 27,751.77 Each

TwentyEight Paise

copper & complete erected in existing 16 G.M.S. housing. Cat III SeventyNine Only

Supply of Approved make Iron Clad or metal clad four pole change over switch Rupees Seventeen

415V. confirming to IS of following capacity (A) Thousand Nine Hundred

200 A / 250 A Cat III Fifteen Paise ThirtyEight

PANEL MOUNTING BUSBARS

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting

Aluminium Busbars with four equal Nos. of bus having current density not

more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped Rupees One Thousand

with colour insulating tape for phase sequence of following current carrying Rn.

267 8.00 1,037.27 ThirtySeven Paise

capacity, erected with necessary bus bar supports /insulators, main cable Mtr

TwentySeven Only

socket to each busbar,erected in existing cubical panel with necessary

(B) Suitable for 200 Amp. Capacity

Qty Item of Work In Rupees Unit Amount In Words

Providing and erecting Approved make Earth fault Relay suitable to mount with

inter connection suitable to following size of moulded case circuit breaker Rupees Five Thousand

268 1.00 having CT ratio & MCCB rating as following along with shunt trip 220V AC. with 5,956.98 Each Four Hundred Fifteen

all internal connections & complete erected in existing M.S.housing. (3) 250 A - Paise SixtyTwo Only

400 A , CT Ratio 1/400

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable

to operate on 240 V A.C. system and having breaking capacity 10 KA to be Rupees One Hundred

269 148.00 erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III 123.22 Each

Twelve Paise Eleven Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load

Rupees Two Hundred

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

270 25.00 box having following capacity 329.26 Each NinetyNine Paise

(A) 6 to 32 Amp. NinetySeven Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load Rupees Three Hundred

271 4.00 (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing 362.59 Each Thirty Paise TwentySeven

box having following capacity Only

Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve)

Rupees Six Hundred

having 10 KA Breaking capacity and confirms to IS : 8828 in existing metal box

272 15.00 736.29 Each SixtyEight Paise SixtyTwo

having following capacity.

(B) 40 Amp. Cat III

Providing and erecting 415 Volt MCB four pole motor & inductive load(c Curve)

having 10 KA Breaking capacity and confirms to IS : 8828 in existing metal box Rupees Seven Hundred

273 25.00 having following capacity. 811.03 Each ThirtySeven Paise Thirty

(C) 63 Amp. Cat- III Only

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Rupees Five Hundred

274 2.00 having following capacity 647.41 Each EightySeven Paise

(a) 6 to 32 Amp. Cat- III EightyTwo Only

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

Rupees Six Hundred

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

275 1.00 713.06 Each FourtySeven Paise

having following capacity

(b)40 Amp. Cat- III

Qty Item of Work In Rupees Unit Amount In Words

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box Rupees Seven Hundred

276 3.00 having following capacity 787.80 Each

Sixteen Paise Nine Only

(c)63 Amp. Cat- III

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees One Thousand

277 3.00 quick action & tripping with all advance feature & do not incorporate any 2,166.45 Each Nine Hundred SixtyNine

electronic component. for following Max. rating erected as directed (i) 25 Paise Fifty Only

Amps.DP Cat. III

providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand

278 22.00 quick action & tripping with all advance feature & do not incorporate any 2,458.34 Each Two Hundred ThirtyFive

electronic component. for following Max. rating erected as directed (ii) Paise Thirteen Only

40Amps. DP Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Rupees Eight Hundred

279 4.00 nos. of MCBs.(The DBs should be used of same company of MCB to be used) 885.77 Each EightyFive Paise

suitable for SeventySeven Only

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used) Rupees Two Thousand

280 1.00 suitable for 2,913.85 Each Nine Hundred Thirteen

(B) three phase incoming and single phase horizontal type outgoing Per phase Paise EightyFive Only

isolation type (PPI)

(b) sheet steel double door (ii)6 way

Qty Item of Work In Rupees Unit Amount In Words

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used) Rupees Three Thousand

281 5.00 suitable for 3,412.79 Each Four Hundred Twelve

(B) three phase incoming and single phase horizontal type outgoing Per phase Paise SeventyNine Only

isolation type (PPI)

(b) sheet steel double door (iii)8 way

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate Rupees Three Thousand

nos. of MCBs.(The DBs should be used of same company of MCB to be used) Eight Hundred

282 1.00 suitable for 3,874.36 Each

SeventyFour Paise

(B) three phase incoming and single phase horizontal type outgoing Per phase ThirtySix Only

isolation type (PPI)

(b) sheet steel double door (iv)12 way

Qty Item of Work In Rupees Unit Amount In Words

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of

mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250

Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Rupees Ten Thousand

Incharge has to ensure the value of earthing resistane mentioned in test Five Hundred

Certificate) & having back filling compound of (B) Inner chemical (CCM NinetyThree Paise

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, EightyNine Only

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for

long time Necessary test report must be submitted by Agency. (c) For

Electrical Installation covering Transformer Neutrals, Lightning arrester

Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e

independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Qty Item of Work In Rupees Unit Amount In Words

Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories , supporting angles/ flats channel

including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with

erection of supplied switch gears, BUSBARS, suitable size of inter connecting Rupees Fourteen

284 4.00 PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite 14,902.55 Thousand Nine Hundred

control fuses/MCB for measuring instruments, earth bus & earth bolts, Two Paise FiftyFive Only

foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber gasket,heavy duty end terminal

connection,danger notice board,necessary ventilation,earthing strip complete.

The Panel shall be painted with epoxy powder coating.

(B) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory

(i) with 350mm depth

Providing and erecting ,Fabricating the box type items made from M.S. Sheet

with A.I. supports, wings, doors, handles other hardware materials as per Rupees One Hundred

285 100.00 requirement design with finishing by three tank powder coating processed 180.79 Kg. Eighty Paise SeventyNine

inside and outside painted, erected as directed including minor civil work. Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Rupees Two Hundred

286 50.00 Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or 264.62 Mtr Twenty Paise Eighteen

in existing trench / pipe of following size of cables Only

(B) 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or Rupees Three Hundred

287 60.00 in existing trench / pipe of following size of cables 454.50 Mtr SeventyEight Paise

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) SeventyFive Only

Qty Item of Work In Rupees Unit Amount In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or Rupees Four Hundred

288 100.00 in existing trench / pipe of following size of cables 589.84 Mtr Ninety Paise EightySix

(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

Rupees Nine Hundred

289 80.00 in existing trench / pipe of following size of cables 1,085.75 Mtr

Four Paise NinetySix Only

(H) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or Rupees One Hundred

290 60.00 in existing trench / pipe of following size of cables 184.83 Mtr FiftyThree Paise FiftyTwo

(A) 4 core 16 Sq. mm Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Rupees One Hundred

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or

291 600.00 229.27 Mtr Ninety Paise EightyNine

in existing trench / pipe of following size of cables((B) 4 core 25 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Rupees Two Hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

292 180.00 359.56 Mtr EightySeven Paise

existing trench / pipe at road crossing or floor of following size of cable. (B)

EightyFive Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Rupees Three Hundred

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps

293 280.00 455.51 Mtr SixtyFour Paise SixtyOne

or in existing trench / pipe at road crossing or floor of following size of

cables.(B) 4 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary clamps Rupees Five Hundred Ten

or in existing trench / pipe at road crossing or floor of following size of Paise Five Only

cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Rupees Six Hundred

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

295 175.00 846.38 Mtr SeventySix Paise Seventy

existing trench / pipe at road crossing or floor of following size of cables. (A)

4 core 10 Sq. mm

Qty Item of Work In Rupees Unit Amount In Words

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape Rupees ThirtyThree Paise

etc for following size of cables. ThirtyThree Only

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape Rupees ThirtyEight Paise

etc for following size of cables. ThirtyEight Only

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape Rupees ThirtyEight Paise

etc for following size of cables. ThirtyEight Only

(C) 2 to 4 core 10 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape Rupees FourtySeven

etc for following size of cables. Paise FourtySeven Only

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring

for PVC insulated armoured cable complete with out going tails, insulating tape Rupees FiftyOne Paise

etc for following size of cables. FiftyOne Only

(E) 2 to 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with Rupees SeventyFive Paise

out going tails, insulating tape etc for following size of cables.(B) 3 & 1/2 core SeventyFive Only

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with Rupees One Hundred

out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 core Three Paise Two Only

Providing and, fixing heavy duty flange type brass double compression type

Rupees One Hundred

cable gland with rubber ring for PVC insulated armoured cable complete with

303 4.00 131.30 Each ThirtyOne Paise Thirty

out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core

Providing and, fixing heavy duty flange type brass double compression type

Rupees Two Hundred

cable gland with rubber ring for PVC insulated armoured cable complete with

304 2.00 238.36 Each ThirtyEight Paise ThirtySix

out going tails, insulating tape etc for following size of cables.(G) 3 & 1/2 core

Qty Item of Work In Rupees Unit Amount In Words

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to Rupees Thirteen Paise

switchgear terminals with brass/cadmium plated nut bolts in an approved Thirteen Only

manner. (B) 10 Sq.mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to Rupees Fifteen Paise

switchgear terminals with brass/cadmium plated nut bolts in an approved Fifteen Only

manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to Rupees Twenty Paise