Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC | L1 | Accepted-AOC L1 Accepted | |
| 2 | L2₹18.9 L+₹1.6 L (9.33%)Rejected-Finance 00 KAMALWAGANJA ROAD NEAR HANUMAN MANDIR HARINAGAR SHIV PURAM PHASE 1 HALDWANI NAINITAL UTTARAKHAND 263139 | NAINITAL | UTTARAKHAND | 263139 | L2 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 34,923.00 | |
| 3 | L3₹20.5 L+₹3.2 L (18.6%)Rejected-Finance | L3 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 34,923.00 | |
| 4 | L4₹21.3 L+₹4.1 L (23.6%)Rejected-Finance R O NAUSHERA DISTT RAJOURI J K 185151 | NAUSHERA | RAJOURI | JAMMU AND KASHMIR | 185151 | L4 | Rejected-Finance Other than L1 after deducting schedule of credit Rs 34,923.00 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE North Akhnoor
GE North Akhnoor PIN 181201 CO 56 APO
REPAIR OF ROOF SHEETS CEILING JOINERY AND CERTAIN MISC BR WORK AT ZONE A AND ZONE B SUNDERBANI UNDER GE NORTH AKHNOOR
2022_MES_533560_1
GE (N)/AKH-21/2022-23
Open Tender
Civil Works
Item Rate
180 days
Sunderbani
Class E cat a i
8 documents required · 8 mandatory
₹500
Yes
GE North Akhnoor
₹40,000
Yes
14 Sept 2022
25 Jun 2022
29 Jul 2022
25 Jun 2022
27 Jul 2022
9 Jul 2022
60 days
Amount
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.
M&L for 15mm thick rendering on other than fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement.
M&L for 15mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement.
M&L Rendering 10mm thick on brick or concrete surface as in chaja/facia upto 2nd floor in cement mortar 1:3 finished even and smooth without using extra cement all as specified.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.
M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in coping ,kneelers,kerbs, bed block incl necessary form work.
M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified.
M&L for providing 75mm thick PCC 1:3 :6 type C-2 using 40mm graded crushed stone aggragate as in sub base/path all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Roughening surfaces of old concrete floors by picking sweeping clean and washing down with water with water to remove dust.
M&L for glazed ceramic tiles vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.
M&L for (300mm x 200mm) x 6 to 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.
M&L Rendering 10mm thick cement plaster on fair face of brick work in cement mortar 1:3 as in backing coat for wall tile.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.06 Sqm but n.exceeding 0.11sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed.
All as per item No 15 above but as in skirting as directed.
M/L light shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished area of each tiles n.exc 0.36 Sq mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with door shade including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes.
As per item No 17 above but as in skirting as directed.
M/L Dark shade vitrified ceramic tiles 10mm thick (square/rectangular ) polished area of each tiles n.exc 0.36 Sq mm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with door shade including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes.
As per item No 19 above but as in skirting as directed.
M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified.
M/L Cheqqured cement concrete tiles 30mx30cm x25mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes .
M&L for marble (white or any other desired colour) as in shelves etc, bedded, jointed and pointed with white cement sturry including cutting & polishing, 15 mm to 18 mm thickness including 20mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes .
M&L for applying two caots of distemper oil emulstion of walls including preparation of new plastered surfaces over one coat of cement primer of alkaliresistant priming paint all as specified and directed.
Preparation new decorated surfaces of walls surfaces and applying two coat of cement base paint over one coat of cement primer of alkaliresistant priming paint all as specified.
Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,all as specified.
S&F false ceiling of grid of galvanzed steel tee/ angle (power coated ) of grid size 600x600mm as directed comprising of main and tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type including 4mm thick everest designer ceiling boards size 595x595mm fixed in position all as directed.
S&F PVC wall lining/panelling consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet filet of width 35mm to make PVC frame as per incl taking down manufacturers and drawings.
Dismantling Plain or corrugated steel sheeting, any guage, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Dismantling Asbestos cement (corruga ted, semicorrugated, etc.) sheets in roof coverings complete.
M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge all as specified and directed by Engr-In-Charge.
All as per item No 32 above here but plain sheets for ridge.
S&F for 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with in L-type or J-type or cranked hook bolts in roofs, etc with grade of zinc coating 275, complete all as specified and directed by Engr-In-Charge.
Ditto as per item No 34 above but except sheet.
Ditto as per item No 34 above but plain sheet for ridge.
Ditto as per item No 34 above but plain sheet for ridge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
Rolled mild steel section as in main and cross beams, hip and jack,rafters, purlins, where connected to common, rafters and running rails and guiders for sliding doors: fixed with angle cleats or other connecting platesconforming to grade Fe410-W (Gde E-250) quality 'A' all as specified
S&F mild steel joist channel angle or tee sections fixed independently without connected plates etc of grade fe-410-0 or fe-310-0.
All as item No 40 above but erection fixing only (Note : dismantled material refixing only).
Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles, all as specified .
M/L brick work with sub class 'B' bricks straight or curved on plan built in CM 1:6 all as specified and directed .
M&L for brick work with sub class B brick straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified and directed.
M&L for walling of random rubble stone masonery coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed.
All as per No 45 above but except stone.
Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses. Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm
M&L for raised pointing to random rubble uncoursed or brought upto course masonry in CM 1:3.
Taking down frames with shutters any description exc 1.5 sqm and n.exc 4 sqm each complete all as specified and dircted.
Taking down frames with shutters any description n.exc 1.5 sqm each complete all as specified and dircted.
Taking down frames with shutters any description exc 1 sqm but n exc 2 sqm each complete all as specified and dircted.
Refixing shutters in the same opening of any description exc 1 sqm and nexc 2 Sqm each.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified
M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
All as per item No 55 above but glazed and skeleton shutter with sash bar for glass / wire gauge.
M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified.
Steel windows or ventilators,fixed type,with glazing bars,including a shop coat red oxide of zinc chrome primer, all as specified.
S & F Steel window/ventilator (Box type) factory made with double shutter (wire gauged shutter and glass/glazzed shutter, wire cloth and glass paned shall be measured and paid separately of size 79mm x 39 mm, 16 guage rectangular tubular frame with side hung. fixed in repairs complete all as specified and directed.EUZ/TD/1269/2008 Sheet 1/1 to 1/3.
All as per item No 59 here-in-before but without glazing bars.
Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0
M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimetre each complete all as specified.
S&F Double action floor spring hydrauliclly regulated made of minimum 1.25mm thickness aluminium alloy fixed under the alluminium doors complete all as specified.
S&F Hydraulic door closer, regulated universal type suitable for doors of any description allas specified and dircted by EIC.
S&F in repairs 150mm Helical door spring incl roller and roller plate (mild steel) incl necessary welding to steel frames complete all as specified and directe by EIC.
S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified.
S&F Extruded aluminium alloy handles, fabricated type, anodized, of 150 mm complete.
S&F Aluminium anodized barrel tower bolt of extruded section and fixed of 150 mm length of bolt complete.
S&F Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) 300 mm long, and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F Floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.
S&F Aluminium door air tight of anodised frame made of size 100mmx45mm of section thickness 1.50mm thick with one or ore rebates including jointing cleats etc for fixing aluminium anodised door shutter fully panelled (two Nos of panels on each shutter) with 5.5mm thick tinted glass shutter rail made of 80mmx45mm of sheet thickness 1.50mm thick (Top, bottom, middle and side rail) single/double leaf side hinge type including necessary jointing /aluminium fillets/glazing bars with rubber gasket with aluminium fillets such as bottom door hydraulic door closer-01 No, aluminium tower bolt 150mm long 01No , aluminium anodised bow handles 300m 02 Nos fancy type on each shutter mortice locks 6 lever Make-harrison, one on each door, bottom and floor stoppers, all fitting shall be of ISI marked except cleats) sizes of each door shall be as per site requirement all as directed and specified.
S&F Aluminium window air tight with glazing bar, with aluminium grills (oranmental type) window shutter style shall be 40mmx19mm, sheet thickness 1.5mm sliding channel 3mm thick of width as required and as directed by Engr-in-Charge of anodised frame made of size 75mmx40mm of section thickness 1.50mm thick, with or without rebate with toughned glass 5mm thick, including rubber beading and gasket and aluminium glazing clips, locking arrangement, aluminium anodised bow handles 75mm 01 No complete all as specified. Note :- All fitting shall be of ISI marked except cleats) sizes of each shutter shall be as per site requirement all as directed and specified.
S&F Aluminium wall partition air tight of anodised frame made of size 100mmx45mm of section thickness 1.50mm thick as required and as directed by Engr-in-Charge with or without rebate with toughned glass 5mm thick, including rubber beading and gasket and aluminium glazing clips, complete all as specified. Note :- All fitting shall be of ISI marked except cleats) sizes of each shutter shall be as per site requirement all as directed and specified.
Dismantling old wooden partition complete all as directed.
Hacking out old glass (any thickness size quality or description) from wooden frame or stone, concrete or brick surrounds glazed with putty or fixed with beads all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F Glazing with figured glass(Frosted), pin head type, 3mm thick, and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified.
S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, or galvanized wire staples fixed in repairs all as specified & directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs unplasticized PVC pipes of pressure rating 10kgf/sq cmfloors of 15mm bore all as specified and as directed by Engineer-in-Charge.
S&F in repairs unplasticized PVC pipes of pressure rating 10kgf/sq cmfloors of 20mm bore all as specified and as directed by Engineer-in-Charge.
S&F Steel water tubing medium grade galvanised ISI marked with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore all as specified and directed.
All as per srl item No 85 here-in-above but 20 mm bore pipe.
Fixing only steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 15 mm, all as specified and directed.
Fixing only steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) of nominal bore dia 20 mm, all as specified.
Taking up or down 15mm bore steel tubing and connections, complete cleaning incl repairing and refixing in the same position as directed by Engr-in charge.
All as per item No 89 above but 20mm bore pipe.
S&F in repairs of stop valves 15mm, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for bore dia of pipe complete all as specified.
Ditto all as per item No 94 but 20mm dia.
Disconnecting existing tank 250 to 500 ltrs capacity setting aside (or lowering if required) for repairs, cleaning complete (incl necessary cleaning material) and hoisting if required reconnecting and refixing in same position including necessary replacement of tank joints of any size and description as directed by Engr-in-charge.
Disconnecting existing tank 750 to 1000 ltrs capacity setting aside (or lowering if required) for repairs, cleaning complete (incl necessary cleaning material) and hoisting if required reconnecting and refixing in same position including necessary replacement of tank joints of any size and description as directed by Engr-in-charge.
Dismantling water tank of capacity exceeding 500 litres but not exceeding 1000 ltrs and removing to stores, all as specified .
Fixing only Rotational moulded HDPE water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position or placed in position inside or outside the bldg connecting up pipes and security access covers complete all as specified
Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified
Fixing only Rotational moulded polythylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position or placed in position inside or outside the bldg connecting up pipes and security access covers complete all as specified
Demolition of reinforced cement concreteof any description and in any position complete all as specified .
Reinforced cement concrete type B1 1:2:4 (using 20mm graded crushed stone aggregate) as in shelves, deck slabs and in similar work complete all as specified .
TMT reinforcement bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer -in-Charge.
TMT reinforcement bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer -in-Charge.
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .
S&F in repairs 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or as in weep holes etc incl dismantling complete all as specified .
S&F PVC (SWR) bend/shoe 110mm dia fixed to rain water pipe all as specified and directed
S&F in repairs CP grating rounded 125mm size of (minimum weight 100gms) complete all as specified and directed
S&F in repairs vitreous china wash basin (white) flat back size 580x450 mm including pillar cock CP, PVC waste pipe and brackets, cutting for and pinning ends of brackets complete all as specified and directed.
S&F for fancy European type (padestal pattern attached with cistern) water closets with P or S trap including seat cover and aluminium henging device and connecting to drain or out going pipe with outlets, all accessories etc compelte fixed in repair. (Make : Cera / Hindware .
S&F PVC connections 15mm size with PTMT nuts of length 600 mm fixed in repair.
S&F fixed in repair viterous China squatting pan, `Orrisa' pattern, size 580x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S' trap.
S&F PVC valve less syphonic action type flushing cistern 10 Ltr capacity low lavel coloured with inlet ball valve float and handel brackets all as fixed in repair.
S&F in repair 15 mm bore CP stop valves fancy type, cast copper alloy with crutch or butter fly handle, high pressure, screwed down, screwed both ends for iron pipe or for brass ferrule all as specified fixed in repairs .
M&L for preparation and brooming down of old decorated plastered or unplastered surfaces of walls including cornice etc and applying one coat of white wash on walls complete all as specified and directed.
Description all as per item No 113 above here-in-before but on ceiling.
M&L for washing, rubbing down and stopping of old distempered surfaces and applying one coat of distemper oil emulsion to walls complete all as specified and directed.
As per item above No 115 above but two coats on wall
Description all as per item No 115 above here-in-before but two coats on wall but over two coat of Birla wall care putty.
Preparation old decorated surfaces of walls surfaces and applying one coat of cement base paint all as specified.
M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified.
M/S K K ENTERPRISES
M/s Mool Raj Romesh Chander
vijay kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .