Redevelopment of Netaji Subhash Chandra Bose Garden for Vapi Municipal Corporation, Vapi.

Item no Item Description Amount

1 SUB ESTIMATE NO.01

PROPOSED SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

2 SUB ESTIMATE NO.02

CONSTRUCTION OF ENTRANCE

3 SUB ESTIMATE NO.03

CONSTRUCTION OFHARDSCAPE/FLOORING ITEMS (SITE DEVELOPMENT WORKS)

4 SUB ESTIMATE NO.04

CONSTRUCTION OF TOILET BLOCK, DRINKING WATER AREA AND UNDERGROUND WATER

TANK [CIVIL+PLUMBING WORK+ELECTRIC WORK]

5 SUB ESTIMATE NO.05

CONSTRUCTION OF WALKWAY AND KERBING

6 SUB ESTIMATE NO.06

SOFTSCAPE [MEDICINAL

GARDEN, NATIVE URBAN FOREST, POLLINATOR PARK]

7 SUB ESTIMATE NO.07

FABRICATION [PERGOLA]

8 SUB ESTIMATE NO.08

CONSTRUCTION OF FOOD KIOSK

9 SUB ESTIMATE NO.09

GARDEN ELECTRICAL WORK

10 SUB ESTIMATE NO.10

PLAY EQUIPMENTS AND GYM EQUIPMENTS

11 SUB ESTIMATE NO.11

ART WORK [CIVIL+SCULPTURE]

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.1

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

1 Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling

and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable

materials (B) By manual in area of light jungle

2 Taking out existing cement concrete (CC) interlocking paver blocks from garden/footpath,

including careful removal, clearing of rubbish, stacking of serviceable blocks within 50 m lead,

disposal of unserviceable material to dumping ground (lead as directed), and making good the 1238.00 Sqm ₹ 83.55 ₹ 1,03,434.90 Market Rate

area as directed by Engineer-in-Charge. All labour, tools, transport, lead & lift, and contractor’s

taxes included.

3 Demolishing/Dismentaling existing brick masonry / stone masonry structure (including garden

walls, small sheds, planter walls,gazebo,play equipment) manually or by mechanical means,

stacking serviceable material within site, and removing and disposing of unserviceable material to 351.04 Cum ₹ 544.95 ₹ 1,91,297.93 20003B

dumping ground including all lead & lift as directed. Rate includes cutting, hacking, removal of

plaster where required and cleaning site.

4 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

5 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and 177.00 Cum ₹ 129.10 ₹ 22,850.70

SUB-BASE, BASES

6 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates

7 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

camber and gradient (excluding spreading of Blindage)(ii) 25mm to 50mm size aggreagates

8 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

camber and gradient (excluding spreading of Blindage)(iv) Chipping varying from 6mm to 25mm 177.00 Cum ₹ 253.58 ₹ 44,883.66 26018C

9 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete. 88.50 Cum ₹ 594.61 ₹ 52,622.99 04009A

10 Providing and filling sand in between the top and bottom plugs with good sand in layers

including compacting as directed. 59.00 Cum ₹ 475.65 ₹ 28,063.35

DESIGN MIX CONCRETE

11 Providing and laying in position ready mixed or site batched design mix cement concrete for

reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural

sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve

durability and workability without impairing strength; including pumping of concrete to site of

laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Market Rate

Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be

payable separately. In case the cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to either re-design the mix or bear

the cost of extra cement.

All works upto plinth level -RCC for foundations

Concrete of M35 grade with minimum cement content of 370 kg /cum - Grade M 35 178.50 Cum ₹ 6,175.00 ₹

12 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level 7600.00 Kg ₹ 75.46 ₹ 5,73,496.00 05014C

13 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin

surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface

applied glass beds as per IRC:35 2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color 42.08 Sqm ₹ 364.08 ₹ 15,318.67

marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid

resistance as mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years.

14 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure

pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for 305.00 Rmt ₹ 658.89 ₹ 2,00,961.45 24007DA

collar joints including testing of joints complete.(D) 300mm

WALK WAY-GRASS PAVERS

15 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

16 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete.

17 Providing and filling sand in between the top and bottom plugs with good sand in layers

including compacting as directed. 67.13 Cum ₹ 475.65 ₹ 31,928.01

18 Providing and laying turf paver on 150 mm thick compacted sub-grade of 20 mm nominal size

stone aggregate base, filling with 150 mm thick sand, including spreading, ramming, Market Rate

consolidating, and finishing smooth—all complete as selected and directed by in charge 895.00 Sqm ₹ 1,575.00 ₹

19 Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material

at required depth in existing trench for laying of cable. below ground / road surface for 160.00 Rmt ₹ 136.00 ₹ 21,760.00 4.5.8

enclosing cable. (D)120 mm

20 Supply and laying of PVC/uPVC pipe of nominal diameter 90mm for water supply including all

necessary specials (elbows, tees, couplers), jointing with approved solvent/ gasket/ sealant,

bedding/trenching where applicable, testing, back-filling and finishing, complete as per

specifications.

BRICK WALL AND FENCING

21 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

22 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A)

Foundation and Plinth 5.49 Cum ₹ 3,646.87 ₹ 20,021.32 05010AA

23 Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A)

24 Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain 62.21 Sqm ₹ 170.10 ₹ 10,581.97 09001AA

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

25 Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Kesar Infra

aggregate 20 mm nominal size derived from natural sources)

26 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

27 Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B)

Conventional 4.61 Cum ₹ 4,011.66 ₹ 18,476.70 06001BA

28 Supply, fabrication and finishing of MS base plate (200×200×8 mm), IS 2062 grade, cut to size

with smooth edges, ready for drilling/welding as required. Suitable for medium-load structural or

equipment mounting. 32.00 Nos ₹ 275.00 ₹ 8,800.00 Market Rate

29 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins 3.94 Q ₹ 8,958.28 ₹ 35,317.12 11002AA

conneted to common rafters and the like

30 Providing and fixing GI Chain-Link Fencing of approved quality and mesh size, made from

Galvanized Iron wire woven into a diamond-shaped mesh. Fencing shall be supported on angle-

iron/pipe/RCC posts with necessary tying wire, GI binding wire, struts, corner supports,

1.30 Rmt ₹ 775.00 ₹ 1,007.50 Market Rate

tensioning arrangement and all accessories required for proper completion.

31 Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size 150x90 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 4.0mtr

long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy

coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer

in charge. A warranty for 10 years for the Retro reflective sheeting from original manufacturer &

a certified copy of 3 year outdoor exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

32 Parking Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size size 60 x 60cms. square plus 60 x 20cms rectangular

additional plate as as per the design of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D

4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and white bends. The details of symbol 4.000 Nos ₹ 5,848.00 ₹ 23,392.00 26096C

foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report

from third party test lab for the product offered shall be submitted by contractor. (A) Class-C

Type-11 Retro Reflective sheeting

33 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer

and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board shall be as per theinstruction of engineer in 12.000 Nos ₹ 5,848.00 ₹ 70,176.00 26093C

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered shall

be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

SUB TOTAL - A RS. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

1 Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth

up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (B) By manual in

area of light jungle

GARDEN SITE AREA 1 1 Area 7225

2 Taking out existing cement concrete (CC) interlocking paver blocks from garden/footpath, including careful

removal, clearing of rubbish, stacking of serviceable blocks within 50 m lead, disposal of unserviceable material to

dumping ground (lead as directed), and making good the area as directed by Engineer-in-Charge. All labour,

tools, transport, lead & lift, and contractor’s taxes included.

EXISTING PAVERS OF GARDEN 1 1 Area 1238

3 Demolishing existing brick masonry / stone masonry structure (including garden walls, small sheds, planter

walls,gazebo,play equipment) manually or by mechanical means, stacking serviceable material within site, and

removing and disposing of unserviceable material to dumping ground including all lead & lift as directed. Rate

includes cutting, hacking, removal of plaster where required and cleaning site.

EXISTING DEINKING WATER STRUCTURE 1 1 6.11 4.61 3.500

EXISTING SHADE/GAZEBO 1 2 6.11 4.61 3.150

GYM/PLAY EQUIPMENTS 1 1 Nos. 75

4 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

ROAD CONSTRUCTION AREA - EARTH WORK 1 1 Area 1180 0.900

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

5 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering

ROAD CONSTRUCTION AREA - EARTH WORK 1 1 Area 1180 0.150

SUB-BASE, BASES

6 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

ROAD CONSTRUCTION AREA - SUB BASE 1 1 Area 1180 0.150

7 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii) 25mm to 50mm size aggreagates (H.B.)

ROAD CONSTRUCTION AREA - SUB BASE 1 1 Area 1180 0.125

8 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(iv) Chipping varying from 6mm to 25mm size.

ROAD CONSTRUCTION AREA - SUB BASE 1 1 Area 1180 0.150

9 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming

and consolidating etc. complete.

ROAD CONSTRUCTION AREA - SUB BASE 1 1 Area 1180.00 0.075

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

10 Providing and filling sand in between the top and bottom plugs with good sand in layers including compacting as

ROAD CONSTRUCTION AREA - SUB BASE 1 1 Area 1180.00 0.050

11 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement

concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /

Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /

retard setting of concrete, to improve durability and workability without impairing strength; including pumping

of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing

and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra

cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case

the cement content in design mix is more than 110% of the specified minimum cement content, the contractor

shall have discretion to either re-design the mix or bear the cost of extra cement.

All works upto plinth level -RCC for foundations

Concrete of M35 grade with minimum cement content of 370 kg /cum - Grade M

ROAD CONSTRUCTION - DESIGN MIX 1 1 Area 1190.00 0.150

12 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level

ROAD CONSTRUCTION - DESIGN MIX 1 1 187.00 7.50

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

13 Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing

and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per

sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35 2015. The finished surface

to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut

patta. The white color marking should provide liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The

marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015. Warranty for the Retro reflectivity should be two years.

WHITE MARKING ON ROAD 1 3 187.00 0.08

14 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2

of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints

complete.(D) 300mm

DRAIN PIPE ROAD SIDE-1 1 1 145.00

DRAIN PIPE ROAD SIDE-1 1 1 160.00

WALK WAY - GRASS PAVERS

15 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

WALKWAY EXCAVATION 1 1 Area 890.00 0.600

16 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming

and consolidating etc. complete.

WALKWAY BRICK BATS FILLING 1 1 Area 895.00 0.150

17 Providing and filling sand in between the top and bottom plugs with good sand in layers including compacting as

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

WALKWAY SAND FILLING 1 1 Area 895.00 0.075

18 Providing and laying turf paver on 150 mm thick compacted sub-grade of 20 mm nominal size stone aggregate

base, filling with 150 mm thick sand, including spreading, ramming, consolidating, and finishing smooth—all

complete as selected and directed by in charge Architect.

WALKWAY GRAVEL FILLING 1 1 Area 895.00

19 Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable.

(D)120 mm outer dia.

ELECTRICAL MAIN LINE 1 1 160.00

20 Supply and laying of PVC/uPVC pipe of nominal diameter 90mm for water supply including all necessary specials

(elbows, tees, couplers), jointing with approved solvent/ gasket/ sealant, bedding/trenching where applicable,

testing, back-filling and finishing, complete as per specifications.

WATER SUPPLY LINE 1 1 160.00

BRICK WALL AND FENCING

21 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

BRICK WALL AND COLUMN EXCAVATION 1 1 122.00 0.75 0.900

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

22 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

BRICK WALL AND COLUMN PCC 1 1 122.00 0.60 0.075

23 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

BRICK WALL IN FOUNDATION 1 1 89.00 0.30 0.425

24 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings

Bases of Columns etc. and Mass concrete.

RAFT FOUNDATION 2 32 0.90 0.90 0.750

25 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

RAFT FOUNDATION 1 32 0.90 0.90 0.375

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

26 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level.

RAFT FOUNDATION

27 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

28 Supply, fabrication and finishing of MS base plate (200×200×8 mm), IS 2062 grade, cut to size with smooth edges,

ready for drilling/welding as required. Suitable for medium-load structural or equipment mounting.

BASE PLATE 1 1 32.00

29 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle

cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

30 Providing and fixing GI Chain-Link Fencing of approved quality and mesh size, made from Galvanized Iron wire

woven into a diamond-shaped mesh. Fencing shall be supported on angle-iron/pipe/RCC posts with necessary

tying wire, GI binding wire, struts, corner supports, tensioning arrangement and all accessories required for

proper completion.

Chain-Link Fencing 1 1 1.30

31 Place Identification Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 150x90 cms. rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and

frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black

and white bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The

fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

IDENTIFICATION SIGN BOARD 1 1 Nos 4.00

32 Parking Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size size 60 x 60cms. square plus 60 x 20cms rectangular additional plate as as per the design

of IRC-67-2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and

two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-

11 as per ASTM D 4956 and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB

Circular MS Pipe as required and frame fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A warranty for

years for the Retro reflective sheeting from original manufacturer & a certified copy of 3 year outdoor exposure

test report from third party test lab for the product offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.01

MEASUREMENTS FOR SITE CLEARANCE AND PROPOSED ROAD CONSTRUCTION WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total Quantity

No. Width Height

PARKING SIGN BOARD 1 1 Nos 4.00

33 Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-2012. Pre treated with

phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black and

white bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor exposure test report from third party test lab for the

product offered shall be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

INFORMATORY SIGN BOARD 1 1 Nos 12.00

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.2

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR CONSTRUCTION OF ENTRANCE

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

1 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

2 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 3.45 Cum ₹ 3,646.87 ₹ 12,592.64 05010AA

Foundation and Plinth

3 Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A)

4 Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain 41.05 Sqm ₹ 170.10 ₹ 6,981.92 09001AA

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

5 Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Kesar Infra

aggregate 20 mm nominal size derived from natural sources)

6 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

7 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete. 64.34 Cum ₹ 286.20 ₹ 18,413.82 04008A

8 Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 10.58 Sqm ₹ 123.05 ₹ 1,301.87

% concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

9 Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) 3.45 Cum ₹ 4,124.97 ₹ 14,243.52 06002BA

10 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack 2.02 Q ₹ 8,958.28 ₹ 18,059.89 11002AA

rafters, purlins conneted to common rafters and the like

11 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates

12 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

paint, brushing, interior to give an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign matter.

TOTAL CIVIL WORK- A RS. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.02

MEASUREMENTS FOR CONSTRUCTION OF ENTRANCE (GATE WITH PAVED AREA)

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

1 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

BRICK MASONARY FOOTING 1 1 46.00 0.90 1.60

COLUMN FOOTING 1 9 1.6 1.6 1.60

2 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

BRICK MASONARY FOOTING 1 1 46.00 0.50 0.08

COLUMN FOOTING 1 9 1.6 1.6 0.08

3 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

BRICK MASONARY FOOTING 1 1 46.00 0.35 1.00

4 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

COLUMN FOOTING (RAFT FOUNDATION) 2 9 1.50 1.5 0.56

FOR METAL COLUMN 2 4 0.75 0.3 1.50

5 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

COLUMN FOOTING (RAFT FOUNDATION) 1 9 1.50 1.5 0.56

FOR METAL COLUMN 1 4 0.75 0.3 1.50

6 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level.

RAFT FOUNDATION

7 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

TOTAL EXCAVATION 103.10 …A

PCC WORK -3.453

MASONARY WORK (up to NGL) -16.100

CONCRETE WORK (up to NGL) -19.212

8 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite

control treatment including labour and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

BRICK MASONRY 1 1 46 0.23

(@ 1.5 ltr/sqm)

9 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

BRICK MASONRY -1 1 1 6.10 0.23 2.10

BRICK MASONRY -2 1 1 5.10 0.35 2.10

BRICK MASONRY -3 1 1 5.20 0.35 3.90

BRICK MASONRY -4 1 1 5.30 0.23 3.90

BRICK MASONRY -5 1 1 5.90 0.35 1.80

BRICK MASONRY -6 1 1 17.00 0.23 1.80

10 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

MAIN GATE @ 32kg/sqm 1 1 3.50 1.80

11 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete.

BRICK MASONARY WALL @ 2.5kg/sqm 1 1 13.10 1.80

12 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter.

MAIN GATE 1 1 3.75 1.80

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.03

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR CONSTRUCTION OF HARDSCAPE/FLOORING ITEMS (SITE DEVELOPMENT WORKS)

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

SYNTHETIC PLAYGROUND

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 158.40 Cum ₹ 115.92 ₹ 18,361.73 04001A

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete.

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

3 camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates 81.75 Cum ₹ 253.58 ₹ 20,730.17 26018C

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

4 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 35.78 Cum ₹ 3,646.87 ₹ 1,30,466.77 05010AA

Foundation and Plinth

2 cm premix carpet surfacing with stone chippings (13.2 mm and 11.2 mm sizes) per 100 sqm

5 plus hot bitumen—includes consolidation with road roller, but excludes the tack coat (paid 477.00 Sqm ₹ 1,185.00 ₹

Kriti Marketing

KOTA STONE FLOOR

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

6 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 119.22 Cum ₹ 115.92 ₹ 13,819.98 04001A

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

7 camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates 56.52 Cum ₹ 253.58 ₹ 14,332.34 26018C

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

9 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 28.26 Cum ₹ 3,646.87 ₹ 1,03,060.55 05010AA

Foundation and Plinth

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

10 cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey 335.60 Sqm ₹ 956.03 ₹ 3,20,843.67 14012BA

cement slurry including rubbing and polishing etc. complete. (B) 30 mm thick

COBBLE STONE FLOOR

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

11 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 18.95 Cum ₹ 115.92 ₹ 2,196.68 04001A

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

12 camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates 5.93 Cum ₹ 253.58 ₹ 1,502.46 26018C

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc. complete.

Providing and laying cobble stone paving in garden area with approved natural stone cobbles,

laid on 75 mm thick PCC 1:2:4 base over compacted subgrade, including spreading 20–25 mm

sand cushion, proper setting of cobbles, filling joints with cement slurry / sand, finishing, curing

and all complete as per drawings and direction of Engineer-in-Charge. Vyara Tiles

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

15 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 56.64 Cum ₹ 115.92 ₹ 6,565.42 04001A

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

16 camber and gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates 18.49 Cum ₹ 475.65 ₹ 8,793.58

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

17 plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement 23.50 Sqm ₹ 114.98 ₹ 2,702.03 17001B

Providing and laying approved quality natural stone pebbles of uniform shape and approved

18 colour, machine washed, of size 20 mm to 40 mm as approved by the Architect / Engineer-in- 123.25 Sqm ₹ 475.00 ₹ 58,543.75 Market Rate

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

19 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 24.30 Cum ₹ 115.92 ₹ 2,816.86 04001A

Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including

20 watering, remming and consolidating etc. complete. 4.05 Cum ₹ 594.61 ₹ 2,408.17 04009A

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

21 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 4.05 Cum ₹ 3,646.87 ₹ 14,769.82 05010AA

Foundation and Plinth

Filling in plinth with sand under floors including watering ramming, consolidating and dressing

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

23 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 43.50 Cum ₹ 115.92 ₹ 5,042.52 04001A

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

24 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 3.93 Cum ₹ 3,646.87 ₹ 14,321.26 05010AA

Foundation and Plinth

Brick work using common burnt clay building bricks having crushing strength not less than

kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A)

Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Kesar Infra

aggregate 20 mm nominal size derived from natural sources)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

Brick work using common burnt clay building bricks having crushing strength not less than

28 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) 13.58 Cum ₹ 4,124.97 ₹ 56,011.94 06002BA

Providing and fixing 18 mm thick (mirror polished and machine cut edge) granite stone of any

29 colour and shade for wall lining over 12 mm thick bed of cement mortar 1:3, joining with white 31.95 Sqm ₹ 2,600.00 ₹ 83,070.00 MR

cement slurry, including pointing, rubbing, curing & polishing, etc.

TOTAL CIVIL WORK- A RS. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.03

MEASUREMENTS FOR CONSTRUCTION OF HARDSCAPE/FLOORING ITEMS (SITE DEVELOPMENT WORKS)

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

SYNTHETIC PLAY GROUND

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

KIDS PLAY AREA EXCAVATION 1 1 Area 102.00 0.450

GYM FLOORING EXCAVATION 1 1 Area 375.00 0.300

2 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming

and consolidating etc. complete.

KIDS PLAY AREA EXCAVATION 1 1 Area 102.00 0.250

GYM FLOORING EXCAVATION 1 1 Area 375.00 0.150

3 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

KIDS PLAY AREA EXCAVATION 1 1 Area 102.00 0.250

GYM FLOORING EXCAVATION 1 1 Area 375.00 0.150

4 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

KIDS PLAY AREA EXCAVATION 1 1 Area 102.00 0.075

GYM FLOORING EXCAVATION 1 1 Area 375.00 0.075

5 2 cm premix carpet surfacing with stone chippings (13.2 mm and 11.2 mm sizes) per 100 sqm plus hot

bitumen—includes consolidation with road roller, but excludes the tack coat (paid separately).

KIDS PLAY AREA EXCAVATION 1 1 Area 102.00

GYM FLOORING EXCAVATION 1 1 Area 375.00

KOTA STONE FLOOR

6 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

KIOSK SITTING AREA 1 1 Area 212.00 0.300

MEDITATION AREA 1 1 Area 123.60 0.450

7 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

KIOSK SITTING AREA 1 1 Area 212.00 0.150

MEDITATION AREA 1 1 Area 123.60 0.200

8 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming

and consolidating etc. complete.

KIOSK SITTING AREA 1 1 Area 212.00 0.150

MEDITATION AREA 1 1 Area 123.60 0.150

9 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

KIOSK SITTING AREA 1 1 Area 212.00 0.075

MEDITATION AREA 1 1 Area 123.60 0.100

10 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 laid over and jointed with grey cement slurry including rubbing and

polishing etc. complete. (B) 30 mm thick

KIOSK SITTING AREA 1 1 Area 212.00

MEDITATION AREA 1 1 Area 123.60

COBBLE STONE FLOOR

11 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

MEDITATION AREA 1 1 16.00 AREA 0.450

HALF SEATING AREA 1 1 23.50 AREA 0.500

12 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

MEDITATION AREA 1 1 16.00 AREA 0.150

HALF SEATING AREA 1 1 23.50 AREA 0.150

13 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming

and consolidating etc. complete.

MEDITATION AREA 1 1 16.00 AREA 0.125

HALF SEATING AREA 1 1 23.50 AREA 0.125

14 Providing and laying cobble stone paving in garden area with approved natural stone cobbles, laid on 75 mm

thick PCC 1:2:4 base over compacted subgrade, including spreading 20–25 mm sand cushion, proper setting of

cobbles, filling joints with cement slurry / sand, finishing, curing and all complete as per drawings and direction

of Engineer-in-Charge.

MEDITATION AREA 1 1 16.00 AREA

HALF SEATING AREA 1 1 23.50 AREA

15 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

BANYAN COURT 1 1 99.75 AREA 0.450

HALF SEATING AREA 1 1 23.50 AREA 0.500

16 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(ii) 40mm to 63mm size aggreagates (H.B.)

BANYAN COURT 1 1 99.75 AREA 0.150

HALF SEATING AREA 1 1 23.50 AREA 0.150

17 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

HALF SEATING AREA 1 1 23.50 AREA

18 Providing and laying approved quality natural stone pebbles of uniform shape and approved colour, machine

washed, of size 20 mm to 40 mm as approved by the Architect / Engineer-in-Charge.

BANYAN COURT 1 1 99.75 AREA

HALF SEATING AREA 1 1 23.50 AREA

19 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

SAND PIT AREA 1 1 54.00 AREA 0.45

20 Filling in foundation and plinth with brick Bats Chhara in layers of 20cm. thickness including watering, remming

and consolidating etc. complete.

SAND PIT AREA 1 1 54.00 AREA 0.08

21 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

SAND PIT AREA 1 1 54.00 AREA 0.08

22 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete

SAND PIT AREA 1 1 54.00 AREA 0.20

23 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

SEATING WALL EXCAVATION - 1 1 1 58.00 0.75 1.00

SEATING WALL EXCAVATION - 2 1 6 2.80 0.75 1.00

24 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

SEATING WALL EXCAVATION - 1 1 1 58.00 0.7 0.08

SEATING WALL EXCAVATION - 2 1 6 2.80 0.7 0.08

25 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

SEATING WALL EXCAVATION - 1 1 1 56.00 0.6 0.30

SEATING WALL EXCAVATION - 2 1 6 2.50 0.6 0.30

26 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

SEATING WALL EXCAVATION - 1 1 1 56.00 0.45 0.30

SEATING WALL EXCAVATION - 2 1 6 2.50 0.45 0.30

27 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level.

BEAM-BARS FOR SEATING WALL

28 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Lime Mortar 1: 2 (1- Lime putty : 2 -fine sand)(A) Modular

SEATING WALL EXCAVATION - 1 1 1 56.00 0.45 0.43

SEATING WALL EXCAVATION - 2 1 6 2.50 0.45 0.43

20 Providing and fixing 18 mm thick (mirror polished and machine cut edge) granite stone of any colour and shade

for wall lining over 12 mm thick bed of cement mortar 1:3, joining with white cement slurry, including pointing,

rubbing, curing & polishing, etc.

SEATING WALL EXCAVATION - 1 1 1 56.00 0.45

SEATING WALL EXCAVATION - 2 1 6 2.50 0.45

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDERGROUND WATER TANK

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

1 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 160.00 Cum ₹ 128.52 ₹ 20,563.20 04002A

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

2 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 3.75 Cum ₹ 3,646.87 ₹ 13,675.76 05010AA

Foundation and Plinth

Brick work using common burnt clay building bricks having crushing strength not less than

3 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) 18.62 Cum ₹ 4,345.02 ₹ 80,923.82 06001AA

Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Kesar Infra

aggregate 20 mm nominal size derived from natural sources)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

6 layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and 51.46 Cum ₹ 129.10 ₹ 6,643.81

Filling in plinth with sand under floors including watering ramming, consolidating and dressing

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

8 Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 50.00 Sqm ₹ 123.05 ₹ 6,152.50

% concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre

chemical / Sqm of surface is recommended as per I.S

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

over and jointed with grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Brick work using common burnt clay building bricks having crushing strength not less than

10 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) 23.89 Cum ₹ 4,124.97 ₹ 98,545.53 06002BA

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior

11 plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement 123.86 Cum ₹ 114.98 ₹ 14,241.42 17001B

Pointing on brickwork with cement mortar 1:3 (1-cement : 3-coarse sand) (A) Flush pointing

Providing & fixing ¾″ (≈ 18 mm) thick granite for door frames in vertical jambs and soffit,

where the outer part is 4″ wide and the inner part is 2″ wide, fixed on walls with a rebate for the

door shutter. Includes machine polishing on exposed edges, rounding of corners, necessary

backing material, and joint filling compound of the same shade of granite.

Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows

14 including anodised alluminium butt hinges with necessary screws. (A) Indian Teak Wood(iii) 11.88 Sqm ₹ 3,557.15 ₹ 42,258.94 10004CA

Partly panelled and partly glazed.

Providing and fixing extruded aluminum window having extruded aluminum Colour Powder

Coated section frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384

Kg/mt,horizontal Four track member size 122.20mm x 31.75mm x 1.10mm @ Wt.

Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with

15 sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of 2.70 Sqm ₹ 2,119.14 ₹ 5,721.68

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with

mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to

be specified by the manufacturer), of approved make, in all colours, shades except burgundy,

bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and

dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with

grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Painting two coats (excluding priming coat) on new wood and wood based surface with ready

17 mixed paint, brushing, oil, gloss, semi gloss to give and even shade including cleaning of all 7.38 Sqm ₹ 104.27 ₹ 769.51

dust, dirt and other foreign matter sand papering and stopping.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new

18 wall surface to give an even shade including thoroughly brushing the surface free from mortar 7.38 Sqm ₹ 40.19 ₹ 296.60

dropping and other foreign matter and sand papered smooth

TOTAL CIVIL WORKFOR TOILET - A RS. ₹

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal

and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the

20 trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous 4.00 Nos ₹ 313.43 ₹ 1,253.72

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous

21 China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet. 4.00 Nos ₹ 113.54 ₹ 454.16

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and

22 overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and 4.00 Nos ₹ 2,321.21 ₹ 9,284.84

making good the same connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I) In white colour

Providing and fixing 12.5 Litres high level C..I. flushing cistern with A pair of C.I. or Mild steel

brackets, womplete with fittings such as syplionic arrangement, 15mm nominal size brass ball

valve with polythene float, lever G.I. China (60 cm. ) and pull union and couplings for

connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and

making good the same (overflow pipe to be measured and paid fo separately )

Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised

24 steel tube flush pipe for high level flushing cistern including connecting the flush pipe with 14.00 Rmt ₹ 338.46 ₹ 4,738.44

cistern and closet and making good the walls and floors.

25 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan 4.00 Nos ₹ 38.60 ₹ 154.40

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges

and rubber buffers. (B) Black plastic seal and cover.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.

28 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. 4.00 Nos ₹ 67.24 ₹ 268.96 23020A

29 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 4.00 Nos ₹ 77.97 ₹ 311.88 23021A

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of

30 the following nominal diameter of self cleansing design with C.I scread down or hinged grating 8.00 Nos ₹ 565.43 ₹ 4,523.44

including the cost of cutting and making good the walls.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm

31 thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and 4.00 Nos ₹ 825.48 ₹ 3,301.92

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap

polished bright. (ii) 20mm dia.

33 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 32mm dia. 3.00 Nos ₹ 311.61 ₹ 934.83 23031D

Providing and fixing chromium plated brass half trun flush cock of approved quality including

fixing in pipe line etc. complete.(iii) 32mm dia.

Providing and fixing Urinal of approved quality including connection with trap and with integral

35 longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm. 3.00 Nos ₹ 1,535.63 ₹ 4,606.89

36 Providing and fixing Rubber plug for sink or wash basin. 4.00 Nos ₹ 16.98 ₹ 67.92

Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia.

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than

39 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length. 6.00 Nos ₹ 100.90 ₹ 605.40

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal

bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE

having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal

bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with

42 the help of clamp at every two metre C/C or shall be concealed as directed including necessary 9.00 Rmt ₹ 117.97 ₹ 1,061.73

fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in

43 proportion 1:1 Salt glazed stoneware pipes including testing of pipes and joints complete.(A) 12.50 Rmt ₹ 214.22 ₹ 2,677.75 24001AA

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone

aggregate 40mm nominal size) bedding for stoneware pipes of following internal diameters with

necessary formwork and curing complete.(A) 100 mm dia. (112 mm Ave.bed thickness)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight

45 C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth 3.00 Nos ₹ 1,279.40 ₹ 3,838.20 24006AA

traps. (A) 100mm x 100mm size P type.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure

46 pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for 15.00 Rmt ₹ 246.21 ₹ 3,693.15 24007BA

collar joints including testing of joints complete.(B) 150mm

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded

stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-

Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-

coarse sand) finished with a floating coat of neat cement and making channels in cement

concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished

47 smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep 3.00 Nos ₹ 19,139.07 ₹ 57,417.21 24008B

including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not

less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of

brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement

Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B type depth 1.50 Metre for 150mm diameter sewer

Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two

coats of Anti-corrosive paint etc. complete.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

49 cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside 2.00 Nos ₹ 7,109.35 ₹ 14,218.70 24016CA

plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement

on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm

deep for pipe lines with three or more inlets.

Providing and fixing overhead water storage tank of capacity 50,000 / 75,000 litres, Syntex make

or equivalent, HDPE/FRP construction, including fittings, manhole, vent, testing and

commissioning complete as per manufacturer’s specification and direction of Engineer-in-

TOTAL PLUMBING WORK- B RS. ₹

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm

(green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper wires

51 upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI marked flush

type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with

mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(b) with 16 swg(1.6 mm thick) HGS metal conduit pipe and accessories painted black erected

flushed on wall/ceiling complete

(g) with 16 swg(1.6 mm thick) HGS metal conduit pipe and accessories painted black erected

concealed in wall/ceiling complete

Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires upto 10 mt

length, in following below of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino

type switch erected with earth continuity connection erected on Metal / PVC/Wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet.

For 6 amp plug and 6 amp switch with 2-1.5 sq. mm Cu. Mains from near by switchboard/db

board upto 6 mt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

B 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards. 1.1.3-B

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type switch / bell push & accessories and earth

53 continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base 1.2.1

frame covered with textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI

marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in

below type of pipe erected with 6A Modular type switch and hum free EME step type

54 electronic fan regulator mounted and accessories with earth continuity of following type erected 1.2.2

on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.

with necessary ceiling rose / H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type

55 of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / 1.2.3

Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling

as per pipe erected with following type of accessories.

(I) For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

(II) For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

erected in below type of pipe with 6A Modular type switches and following type of accessories

56 erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / 1.2.5

metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as directed.

(c) with oval conduit /PVC casing capping double lock type erected flushed on wall/ceiling

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver 2.15.1-A

(ii) 12-14 Watts, Surge-2 KV, IP-20, conventional 4 feet 12.00 Nos ₹ 236.00 ₹ 2,832.00 2.15.1-A-ii

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

59 body with inbuilt lowers & square frame.

TOTAL ELECTRICAL WORK- C RS. ₹

UNDER GROUND WATER TANK - 70,000 ltr

3 RCC Base Slab (m25) 7.70 Cum ₹ 7,000.00 ₹ 53,900.00 MR

4 RCC Side Walls 13.20 Cum ₹ 7,000.00 ₹ 92,400.00 MR

5 RCC Top Slab 4.30 Cum ₹ 7,000.00 ₹ 30,100.00 MR

6 Reinforcement Steel (Fe500) 2500.00 Kg ₹ 70.46 ₹ 1,76,150.00 05014C

7 Centering & Shuttering 280.00 Sqm ₹ 525.25 ₹ 1,47,070.00 09001KA

8 Internal waterproof Cement Plaster (1:3) 135.00 Sqm ₹ 300.00 ₹ 40,500.00 MR

9 External waterproof Treatment 135.00 Sqm ₹ 300.00 ₹ 40,500.00 MR

10 Backfilling & Compaction 115.00 Cum ₹ 286.20 ₹ 32,913.00 04008A

11 Manhole, Piping, Testing & Misc. 1.00 Lsm ₹ 75,000.00 ₹ 75,000.00 MR

TOTAL CONSTRUCTION OF WATER TANK WORK- D RS. ₹

TOTAL COST FOR TOILET AND UNDER GROUND WATER TANK ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

1 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

TOILET EXCAVATION 1 2 12.50 4.00 1.60

2 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

TOILET PCC 1 1 12.50 4.00 0.08

3 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

BRICK MASONARY (230mm Wall) 1 2 12.50 0.35 1.000

BRICK MASONARY (115mm Wall) 1 3 2.80 0.23 1.000

4 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

COLUMN FOOTING (RAFT FOUNDATION) 1 8 1.50 1.5 0.56

TOILET GRADE SLAB 1 1 12.5 4 0.08

TOILET LINTEL 1 1 45 0.08

TOILET FLOOR SLAB 1 1 12.5 4 0.15

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

5 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

RAFT FOUNDATION

6 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering

TOTAL EXCAVATION 160.00 …A

PCC-FOOTING -3.750

MASONARY WORKS-FOOTING -47.713

7 Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

8 Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite

control treatment including labour and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC

chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at

the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

TOILET 1 1 12.5 4

9 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

TOILET FLOOR 1 1 12.5 4

10 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Lime Mortar 1: 2 (1- Lime putty : 2 -fine sand)(A) Modular

BRICK MASONARY (230mm Wall) 1 1 12.50 0.23 3.80

BRICK MASONARY (115mm Wall) 1 3 1.20 0.115 2.40

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

11 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

BRICK MASONARY (230mm Wall) 1 1 12.50 3.80

BRICK MASONARY (115mm Wall) 1 3 1.20 2.40

12 Pointing on brickwork with cement mortar 1:3 (1-cement : 3-coarse sand) (A) Flush pointing

BRICK MASONARY (230mm Wall) 1 1 12.50 3.80

13 Providing & fixing ¾″ (≈ 18 mm) thick granite for door frames in vertical jambs and soffit, where the outer part is

4″ wide and the inner part is 2″ wide, fixed on walls with a rebate for the door shutter. Includes machine

polishing on exposed edges, rounding of corners, necessary backing material, and joint filling compound of the

same shade of granite.

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

14 Providing and fixing 35 mm thick shutters for Doors, windows and clear story windows including anodised

alluminium butt hinges with necessary screws. (A) Indian Teak Wood(iii) Partly panelled and partly glazed.

15 Providing and fixing extruded aluminum window having extruded aluminum Colour Powder Coated section

frame main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384 Kg/mt,horizontal Four track member size

122.20mm x 31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of size 122.20mm x 31.75mm x 1.50mm

,@ Wt. 1.398 Kg/mt with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt,vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc complete for window

16 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as

approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

BRICK MASONARY (230mm Wall) 1 1 12.50 2.40

BRICK MASONARY (115mm Wall) 1 3 1.20 2.40

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

17 Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint,

brushing, oil, gloss, semi gloss to give and even shade including cleaning of all dust, dirt and other foreign

matter sand papering and stopping.

BRICK MASONARY (230mm Wall) 1 1 6.50 0.45

18 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign

matter and sand papered smooth

BRICK MASONARY (230mm Wall) 1 1 6.50 0.45

19 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured

and paid for separately)(A) vitreous China Pattern :(i) in white colour

PHYSICALLY DISABLED 1 1

20 Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the

pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

PHYSICALLY DISABLED 1 1

21 Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous China 250mm x

130mm x 30mm footrest to long pattern squatting pan water closet.

PHYSICALLY DISABLED 1 1

22 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets, complete with

fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle

unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled

flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern

and closet (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour

PHYSICALLY DISABLED 1 1

23 Providing and fixing 12.5 Litres high level C..I. flushing cistern with A pair of C.I. or Mild steel brackets, womplete

with fittings such as syplionic arrangement, 15mm nominal size brass ball valve with polythene float, lever G.I.

China (60 cm. ) and pull union and couplings for connections with inlet, outlet and overflow pipes etc. including

cutting holes in walls and making good the same (overflow pipe to be measured and paid fo separately )

PHYSICALLY DISABLED 1 1

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

24 Providing and fixing in position with clamps etc. 32mm nominal internal diameter galvanised steel tube flush

pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good

the walls and floors.

FEMALE 1 2 3.500

PHYSICALLY DISABLED 1 1 3.500

25 Providing and fixing G.I. inlet connection for flush pipe with W.C. Pan

PHYSICALLY DISABLED 1 1

26 Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber

buffers. (B) Black plastic seal and cover.

PHYSICALLY DISABLED 1 1

27 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.

PHYSICALLY DISABLED 1 1

28 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

PHYSICALLY DISABLED 1 1

29 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.

PHYSICALLY DISABLED 1 1

30 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and

making good the walls.

PHYSICALLY DISABLED 1 1

DRINKING WATER 1 1

31 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet

or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

PHYSICALLY DISABLED 1 1

32 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (ii)

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

PHYSICALLY DISABLED 1 2

33 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 32mm dia.

PHYSICALLY DISABLED 1 1

34 Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line

etc. complete.(iii) 32mm dia.

PHYSICALLY DISABLED 1 1

35 Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal

flush pipe.(A) Squating plate pattern white earthenware 550mm x 300mm.

36 Providing and fixing Rubber plug for sink or wash basin.

PHYSICALLY DISABLED 1 1

37 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (ii) 50mm dia.

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

PHYSICALLY DISABLED 1 1

38 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.

FEMALE 1 1 1.00

PHYSICALLY DISABLED 1 1

39 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length.

FEMALE 1 1 3.00

40 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [B] 20 mm.

FEMALE 1 2 2.75

PHYSICALLY DISABLED 1 2 2.90

DRINKING WATER 1 2 2.50

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

41 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps

including making good the wall, ceiling and floor etc. complete. [D] 32mm.

FEMALE 1 1 5.75

PHYSICALLY DISABLED 1 1 3.25

DRINKING WATER 1 1 2.50

42 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost of all materials.

FEMALE 1 1 3.00

PHYSICALLY DISABLED 1 1 3.00

43 Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Salt

glazed stoneware pipes including testing of pipes and joints complete.(A) 100mm dia.

TOILET BLOCK 1 1 12.50

44 Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm

nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and curing

complete.(A) 100 mm dia. (112 mm Ave.bed thickness)

TOILET BLOCK 1 1 12.50

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

45 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P

TOILET BLOCK 1 3 1.00

46 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2

of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints

complete.(B) 150mm

TOILET BLOCK 1 1 15.00

47 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate

20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and

1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2)

B type depth 1.50 Metre for 150mm diameter sewer

TOILET BLOCK 1 3 1.00

48 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with two coats of Anti-

corrosive paint etc. complete.

TOILET BLOCK 1 1 11.00

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.04

MEASUREMENTS FOR CONSTRUCTION OF NEW TOILET BLOCK AND UNDER GROUND WATER TANK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

49 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and

450mm deep for pipe lines with three or more inlets.

TOILET BLOCK 1 1 2.00

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.05

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR CONSTRUCTION OF WALKWAY AND KERBING

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

WALK WAY-PAVER BLOCK

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

1 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 437.63 Cum ₹ 115.92 ₹ 50,729.49 04001A

Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required

2 camber and gradient (excluding spreading of Blindage)(iv) Chipping varying from 6mm to 173.25 Cum ₹ 253.58 ₹ 43,932.74 26018C

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

3 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 87.53 Cum ₹ 3,646.87 ₹ 3,19,192.30 05010AA

Foundation and Plinth

Providing and filling sand in between the top and bottom plugs with good sand in layers

including compacting as directed.

Providing and laying selected interlocking cement concrete paver blocks of approved

manufacturer/brand, thickness 60 mm (or as specified), of required size, shape and colour as Market Rate

directed by the Architect/Engineer-in-Charge, laid in required pattern over 50 mm thick (Beganit Mapple

5 compacted sand bed on well prepared sub-base, filling joints with clean sand, compacting with 1095.00 Sqm ₹ 1,850.00 ₹

60mm PS finish)

plate vibrator, including all materials, labour, tools, plant, equipment, transport, lead & lift,

curing and complete execution in accordance with approved specifications and instructions of

Architect/Engineer-in-Charge.

DRAIN ALONG WALKWAY

Providing and constructing cast-in-situ cement concrete dished channel drain of approved width, Market Rate

6 depth and curvature, for surface water drainage, as selected by the Architect / Engineer-in- 313.00 Rmt ₹ 1,000.00 ₹ 3,13,000.00 (Dished Channel)

Charge. Vyara Tiles

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful

7 materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 252.72 Cum ₹ 115.92 ₹ 29,295.30 04001A

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

8 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 31.59 Cum ₹ 3,646.87 ₹ 1,15,204.62 05010AA

Foundation and Plinth

Brick work using common burnt clay building bricks having crushing strength not less than

9 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) 113.02 Cum ₹ 4,345.02 ₹ 4,91,082.85 06001AA

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

length,30cm height and 15cm thick of M200 grade concret as per approved design and including

10 excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) 1404.00 Rmt ₹ 376.43 ₹ 5,28,507.72 14023A

TOTAL CIVIL WORK- RS. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.05

MEASUREMENTS FOR CONSTRUCTION OF WALKWAY AND KERBING

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

PEVER BLOCK WALKWAY

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

WALKWAY EXCAVATION 1 1 Area 1095.00 0.375

DRAIN EXCAVATION 1 1 Area 72.00 0.375

2 Spreading the stone aggregate for rolling and W.B.M. including filling the interstices to required camber and

gradient (excluding spreading of Blindage)(iv) Chipping varying from 6mm to 25mm size.

WALKWAY RUBBLE SOILING 1 1 Area 1095.00 0.150

DRAIN RUBBLE SOILING 1 1 Area 72.00 0.125

3 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

WALKWAY PCC 1 1 Area 1095.00 0.075

DRAIN PCC 1 1 Area 72.00 0.075

4 Providing and filling sand in between the top and bottom plugs with good sand in layers including compacting

SAND FOR WALKWAY 1 1 Area 1095.00 0.045

SAND FOR DRAIN 1 1 Area 72.00 0.025

5 Providing and laying selected interlocking cement concrete paver blocks of approved manufacturer/brand,

thickness 60 mm (or as specified), of required size, shape and colour as directed by the Architect/Engineer-in-

Charge, laid in required pattern over 50 mm thick compacted sand bed on well prepared sub-base, filling joints

with clean sand, compacting with plate vibrator, including all materials, labour, tools, plant, equipment,

transport, lead & lift, curing and complete execution in accordance with approved specifications and

instructions of Architect/Engineer-in-Charge.

PAVER BLOCK FOR WALKWAY 1 1 Area 1095.00

DRAIN ALONG WITH WALKWAY

6 Providing and constructing cast-in-situ cement concrete dished channel drain of approved width, depth and

curvature, for surface water drainage, as selected by the Architect / Engineer-in-Charge.

DISHED CHANNEL DRAIN 1 1 313.00

7 Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

KERBING EXCAVATION ALONG WALKWAY 1 1 500.00 0.30 0.600

KERBING EXCAVATION ALONG 1 1 584.00 0.30 0.600

SOFTSCAPE/PLANTATION

KERBING EXCAVATION ROAD SIDE 1 1 320.00 0.30 0.600

8 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

KERBING EXCAVATION ALONG WALKWAY 1 1 500.00 0.30 0.075

KERBING EXCAVATION ALONG 1 1 584.00 0.30 0.075

SOFTSCAPE/PLANTATION

KERBING EXCAVATION ROAD SIDE 1 1 320.00 0.30 0.075

9 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

KERBING EXCAVATION ALONG WALKWAY 1 1 500.00 0.23 0.350

KERBING EXCAVATION ALONG 1 1 584.00 0.23 0.350

SOFTSCAPE/PLANTATION

KERBING EXCAVATION ROAD SIDE 1 1 320.00 0.23 0.350

10 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm

height and 15cm thick of M200 grade concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

KERBING EXCAVATION ALONG WALKWAY 1 1 500.00

KERBING EXCAVATION ALONG 1 1 584.00

SOFTSCAPE/PLANTATION

KERBING EXCAVATION ROAD SIDE 1 1 320.00

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.06

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR MAKING OF SOFTSCAPE(PLANTATION)

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

A. MEDITATION GARDEN (CIVIL WORK)

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

1 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 39.90 Cum ₹ 128.52 ₹ 5,127.95 04002A

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

2 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 2.49 Cum ₹ 3,646.87 ₹ 9,094.38 05010AA

Foundation and Plinth

Brick work using common burnt clay building bricks having crushing strength not less than

3 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) 11.47 Cum ₹ 4,345.02 ₹ 49,842.81 06001AA

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

4 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain 27.53 Sqm ₹ 170.10 ₹ 4,683.02 09001AA

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Kesar Infra

aggregate 20 mm nominal size derived from natural sources)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness

including watering, ramming and consolidating etc. complete.

Brick work using common burnt clay building bricks having crushing strength not less than

8 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) 9.58 Cum ₹ 4,124.97 ₹ 39,500.71 06002BA

Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding

9 with water and leveling (cost of supplying earth and sludge or manure and mixing excluded). 66.00 Cum ₹ 750.00 ₹ 49,500.00 Market Rate

TOTAL CIVIL WORK FOR MEDITATION GARDEN - A RS. ₹

B. SOFTSCAPE (PLANTATION)

10 SOIL MIXES :

Excavation for formation levels and trenches

a. Soil filling grade with mixture as described in Specification. 370.00 Cum ₹ 325.00 ₹

The qty of excavation for level formation is considered as per formation levels proposed by

landscape architects.

A. Soil mix A shall comprise: True ground

a. Red Soil (70%of total soil) 1377.00 Cum ₹ 610.00 ₹

b. Sand (15%of total soil) 340.00 Cum ₹ 810.00 ₹

c. Organic compost-Farm yard manure (15%of total soil) 340.00 Cum ₹ 1,325.00 ₹

d. Fertilizer (NPK) 15-15-15 350 g/m3 125.00 Kg ₹ 275.00 ₹

B. Chemical Treatment

a. Termiticide 12.00 Ltr. ₹ 1,200.00 ₹

TOTAL (A+B) ₹ 17,34,895.00 Market Rate

11 SUPPLY OF PLANT CALCULATIONS:

a. PASPALAM LAWN 518.65 Sqm ₹ 375.00 ₹

b. NATIVE URBAN FOREST (MIYAWAKI TREES) - 4ft ht. EACH TREE 2125.00 Nos ₹ 325.00 ₹

PLANTATION ALONG WALKWAY

(combination of ground cover, small and big shrubs and small trees)

PLANTATION IN OTHER PLANTER BEDS

(combination of ground cover, small and big shrubs and small trees)

MEDICINAL GARDEN AREA

(small shrubs, big shrubs, small trees)

POLLINATOR GARDEN AREA

(small shrubs, big shrubs, ground cover, small trees, pollinator friendly)

TOTAL SUPPLY ₹ 24,32,258.75 Market Rate

14 PLANTATION INSTALLATION:

a. PASPALAM LAWN

Planting of grass - Paspalum ( As per Plan ) including Fine dressing, removal of stones, mixing

of manure/pesticide in proper proposition, grassing, filling and leveling of fine sand after first

b. NATIVE URBAN FOREST (MIYAWAKI TREES)

Implementation with soil mix that include soil compost, or other growth material along with

stack support for trees.

c. PLANTATION ALONG WALKWAY 659.45 Sqm ₹ 200.00 ₹

d. PLANTATION IN OTHER PLANTER BEDS 352.00 Sqm ₹ 200.00 ₹

e. MEDICINAL GARDEN AREA 237.75 Sqm ₹ 200.00 ₹

f. POLLINATOR GARDEN AREA 190.00 Sqm ₹ 200.00 ₹

Facility Informatory Sign :-Providing and fixing sign boards made out of 2mm aluminium sheet /

4mm ACP (Aluminum composite Panel); size 80 x 60 cms rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching; coated with one coat of epoxy

primer and two coats of best quality epoxy paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest M.O.S.T.Specifications; 3.6mtr

long stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

15 from suitable size iron angle of 35 x 35 x 3mm; painted with bestquality epoxy coatings in black 56.00 Nos ₹ 5,848.00 ₹ 3,27,488.00 26093C

and white bends. The details of symbol foreach board shall be as per theinstruction of engineer

in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test lab for the product offered shall

be submitted by contractor. (A) Class-C Type-11 Retro Reflective sheeting

TOTAL INSTALLATION ₹ 10,14,843.00 Market Rate

WATER SUPPLY FOR GARDEN

1 UPVC Pipe 40 mm 750.00 Rmt ₹ 135.00 ₹

2 Fittings (elbows/tees/reducers) Lsm ₹

3 Valves & taps Lsm ₹

4 Jointing / Clamps / Solvent Lsm ₹

5 Labour + Testing + Fixing Lsm ₹

TOTAL WATER SUPPLY INSTALLATION ₹

TOTAL COST FOR SOFTSCAPE AND CIVIL WORK - Rs. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.06

MEASUREMENTS FOR MAKING OF SOFTSCAPE

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

1 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

BRICK MASONARY FOOTING 1 1 66.50 0.60 1.00

2 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

BRICK MASONARY FOOTING 1 1 66.50 0.50 0.08

3 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(A) Modular

BRICK MASONARY FOOTING 1 1 66.50 0.23 0.75

4 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

5 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

6 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level.

7 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

TOTAL EXCAVATION 39.90 …A

PCC WORK -2.494

MASONARY WORK (up to NGL) -11.471

CONCRETE WORK (up to NGL) -6.883

9 Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

BRICK MASONRY -1 1 1 66.50 0.12 1.20

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.07

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR CONSTRUCTION OF FABRICATION

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

Supply, fabrication and finishing of MS base plate (200×200×8 mm), IS 2062 grade, cut to size

1 with smooth edges, ready for drilling/welding as required. Suitable for medium-load structural 42.00 Nos ₹ 275.00 ₹ 11,550.00 MR

or equipment mounting.

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack

rafters, purlins conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

4 paint, brushing, interior to give an even shade including cleaning the surface an even shade 163.00 Sqm ₹ 86.94 ₹ 14,171.22

including cleanicn the surface of all dirt, dust and other foreign matter.

TOTAL FABRICATION WORK- A RS. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.07

MEASUREMENTS FOR CONSTRUCTION OF FABRICATION WORK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

1 Supply, fabrication and finishing of MS base plate (200×200×8 mm), IS 2062 grade, cut to size with smooth

edges, ready for drilling/welding as required. Suitable for medium-load structural or equipment mounting.

BASE PLATE 1 42

2 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete. (16mm

Dia., 300mm length , 0.80 kg)

ANCHOR BOLT 1 42

3 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

COLUMN @ 12kg/sqm 1 9 4.20

BEAM @ 12kg/sqm 1 1 130.00

PERGOLA @ 10.90kg/sqm 1 24 5.70

PERGOLA @ 10.90kg/sqm 1 10 2.90

SEATING PERGOLA

COLUMN @ 5.34kg/sqm 1 60 3.15

BEAM @ 5.34kg/sqm 1 1 102.00

PERGOLA @ 1.89kg/sqm 1 53 2.15

PERGOLA @ 1.89kg/sqm 1 32 2.10

4 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter.

GATE PERGOLA AREA 1 1 AREA 59.00

SEATING PERGOLA 1 1 AREA 104.00

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.08

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR CONSTRUCTION OF FOOD KIOSK

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

1 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 58.97 Cum ₹ 128.52 ₹ 7,578.66 04002A

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone

2 aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) 2.95 Cum ₹ 3,646.87 ₹ 10,752.57 05010AA

Foundation and Plinth

Providing formwork of ordinary timber planking so as to give a rough finish including centering

shuttering strutting and propping etc. Height of propping and centering below supporting floor to

3 ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain 44.80 Sqm ₹ 170.10 ₹ 7,619.90 09001AA

concrete work in. (A) Foundations Footings Bases of Columns etc. and Mass concrete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the

cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone Kesar Infra

aggregate 20 mm nominal size derived from natural sources)

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and

placing in position complete upto floor two level.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in

6 layers not exceeding 20 cm. in depth consolidating each disposited layer by ramming and 42.55 Cum ₹ 129.10 ₹ 5,492.65

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid

7 over and jointed with grey cement slurry mixed with pigment to match the shade of slab 30.34 Sqm ₹ 956.03 ₹ 29,005.95 14012AA

including rubbing and polishing etc. complete. (A) 25mm thick

Supply, fabrication and finishing of MS base plate (200×200×8 mm), IS 2062 grade, cut to size

with smooth edges, ready for drilling/welding as required. Suitable for medium-load structural or

8 equipment mounting. 8.00 Nos ₹ 275.00 ₹ 2,200.00 Market Rate

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in

position and applying a priming coat of red lead paint. (A)In beams and joists, channels angles

10 Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack 9.13 Q ₹ 8,958.28 ₹ 81,811.67 11002AA

rafters, purlins conneted to common rafters and the like

Providing and fixing cement fibre board cladding of approved make (such as Everest / Shera /

Visaka or equivalent), 8–10 mm thick, over welded mild steel pipe / box / fabricated steel

11 members, 91.02 Sqm ₹ 2,000.00 ₹ 1,82,040.00 Market Rate

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel

paint, brushing, interior to give an even shade including cleaning the surface an even shade

12 including cleanicn the surface of all dirt, dust and other foreign matter. 91.02 Sqm ₹ 86.94 ₹ 7,913.28

Providing and Laying of One side alluminium foil thermal bubble insulation barrier on the

external side of the LWGS wall Panel under the Cement Board as & Where directed by Engineer-

Providing, supplying and fixing high-tensile cold-rolled steel roofing sheets, coated with

Zinc–Aluminium alloy (55% Aluminium, 43.5% Zinc, 1.5% Silicon) conforming to IS 15961 /

14 ASTM A792, Galvalume® make or equivalent approved make, of minimum 550 MPa yield 30.34 Sqm ₹ 2,550.00 ₹ 77,367.00 Market Rate

strength, with AZ150 coating mass (or as specified), profiled / corrugated / trapezoidal, of

minimum 0.47 mm BMT (0.50 mm TCT) or as approved

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting

holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i)

600mm x 450mm x 150mm size

14 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. 1.00 Nos ₹ 88.94 ₹ 88.94 23020B

15 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 1.00 Nos ₹ 77.97 ₹ 77.97 23021A

16 Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. 1.00 Nos ₹ 36.61 ₹ 36.61

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each

Providing and fixing 600mm x 120mm glass shelf with C.P. brass bracket and guard rail

complete mixed to wooden plug with C.P. brass screws.

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of 1.5 sq. mm

(green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand copper wires

19 upto max length of 10 mt, in below type of pipe erected with 6A Tissino Type ISI marked flush

type switch / bell push and accessories erected on Metal / PVC/Wooden Box covered with

mm thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(b) with 16 swg(1.6 mm thick) HGS metal conduit pipe and accessories painted black erected

flushed on wall/ceiling complete

Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires upto 10 mt

length, in following below of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino

type switch erected with earth continuity connection erected on Metal / PVC/Wooden box

covered with 3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet.

For 6 amp plug and 6 amp switch with 2-1.5 sq. mm Cu. Mains from near by switchboard/db

board upto 6 mt.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

B 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards. 1.1.3-B

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to

be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & Clamps with following dia of pipes, in approved manner as directed

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver 2.15.1-A

(ii) 12-14 Watts, Surge-2 KV, IP-20, conventional 4 feet 12.00 Nos ₹ 236.00 ₹ 2,832.00 2.15.1-A-ii

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.

TOTAL CIVIL-ELECTRICAL-PLUMBING WORK- RS. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.08

MEASUREMENTS FOR CONSTRUCTION OF FOOD KIOSK

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

1 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

FOOD KIOSK AREA EXCAVATION 1 1 9.25 4.25 1.50

2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and

shuttering - All work up to plinth level :

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm

nominal size derived from natural sources)

FOOD KIOSK AREA EXCAVATION 1 1 9.25 4.25 0.08

3 Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering

strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations

Footings Bases of Columns etc. and Mass concrete.

4 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering,

shuttering, finishing and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm

nominal size derived from natural sources)

GRADE SLAB 1 1 7.4 4.1 0.08

5 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position

complete upto floor two level.

RAFT FOUNDATION

6 Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering

TOTAL EXCAVATION 58.97 …A

PCC WORK -2.948

COLUMN FOOTING (up to NGL) -13.475

7 Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement

slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm

FOOD KIOSK FLOOR 1 1 7.4 4.1

8 Supply, fabrication and finishing of MS base plate (200×200×8 mm), IS 2062 grade, cut to size with smooth

edges, ready for drilling/welding as required. Suitable for medium-load structural or equipment mounting.

BASE PLATE 1 1 8.00

9 Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete. (16mm

Dia., 300mm length , 0.80 kg)

ANCHOR BOLT 1 24

10 Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

COLUMN @ 12kg/sqm 1 8 3.20

BEAM @ 12kg/sqm 1 1 28.90

PRIMARY JOINT @ 3.22kg/sqm 1 2 22.75

SECONDARY JOINT @ 1.68kg/sqm 1 2 2.90

SECONDARY JOINT @ 1.68kg/sqm 1 3 3.20

PRIMARY JOINT @ 3.22kg/sqm 1 1 14.30

SECONDARY JOINT @ 1.68kg/sqm 1 1 24.30

11 Providing and fixing cement fibre board cladding of approved make (such as Everest / Shera / Visaka or

equivalent), 8–10 mm thick, over welded mild steel pipe / box / fabricated steel members,

CEMENT FIBER BOARD 1 1 7.40 4.1 3.00

11 Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all

dirt, dust and other foreign matter.

FOOD KIOSK 1 1 7.40 4.1 3.00

12 Providing and Laying of One side alluminium foil thermal bubble insulation barrier on the external side of the

LWGS wall Panel under the Cement Board as & Where directed by Engineer-in-Charge.

FOOD KIOSK ROOF 1 1 7.40 4.1

13 Providing and Laying of One side alluminium foil thermal bubble insulation barrier on the external side of the

LWGS wall Panel under the Cement Board as & Where directed by Engineer-in-Charge.

FOOD KIOSK ROOF 1 1 7.40 4.1

14 Providing, supplying and fixing high-tensile cold-rolled steel roofing sheets, coated with Zinc–Aluminium alloy

(55% Aluminium, 43.5% Zinc, 1.5% Silicon) conforming to IS 15961 / ASTM A792, Galvalume® make or

equivalent approved make, of minimum 550 MPa yield strength, with AZ150 coating mass (or as specified),

profiled / corrugated / trapezoidal, of minimum 0.47 mm BMT (0.50 mm TCT) or as approved

FOOD KIOSK ROOF 1 1 7.40 4.1

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.09

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR INSTALLATION OF ELECTRICAL WORKS

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

LIGHT POLE FOR ROAD AREA

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by

CNC filament winding machine using thermoset resin polyester/epoxy resin system) having

minimum 62% glass content. The pole should be in one piece and tapered round in shape, having

smooth finish and should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented.

A highly weather resistant polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness

shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of

pole for the given load“ Pole should be generally made as per the dimensional data, performance 6.1.7(A)-4

criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest

version or ASTM D 4923/01 including cable termination box with necessary accessories . The

size of pole and type of installation with foundation as per manufacturer details and site

requirement are as below .

Suitable for direct grouting & Single arm Bracket. 6.1.7-3

Overall length of 7.5 Mtr. Average Thickness: 7.5mm.

Top/ Bottom OD Dia: 90/117mm ± 2mm approx. approx. Weight of Pole 45 kg approx.

Suitable for direct grouting & Double Side Arm Bracket. 6.1.7-4

Overall length of 7.5 Mtr. Average Thickness: 8mm. Top/ Bottom OD Dia: 114/178 mm ± 2mm

approx. approx. Weight of Pole 52 kg approx. 8.00 Nos ₹ 13,920.00 ₹ 1,11,360.00 6.1.7-4-D

Providing and erecting Street Light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm /80mm / required size of pole top having sufficient fasteners for fixing

2 the brackets and having spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable 6.5.2-b

welded stays, reducer and with check nuts complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint with following nos of arms.

Single Arm Bracket 1.5 Mtr 6.00 Nos ₹ 677.00 ₹ 4,062.00 6.5.2(b)-A

Double Arm Bracket 1.5 Mtr 8.00 Nos ₹ 993.00 ₹ 7,944.00 6.5.2(b)-B

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor

3 for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road 4.4.2

crossing or floor of following size of cable.

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC

bushes, Check-nuts etc. complete of following sizes.

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

5 glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 2.16.2

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.

Above 60 to 90 watts 2.16.2-A-iii

Cat-lll 14.00 Nos ₹ 5,917.00 ₹

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

single phase incoming and horizontal single phase outgoing 3.11.5-A

Providing and erecting metallic vitrified danger notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

8 Providing and erecting C.I./M.S. flange type base plate of 300mm x 300mm x 6mm 14.00 Nos ₹ 238.00 ₹ 3,332.00 6.3.1

Excavating hard Murrum or Metal road by chiselling for preparing pit for poles or earth plates

or for laying pipes & clearing the site by removing debris & making site good.

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm

10 stone metal duly plastered with necessary curing for pole muffing or any other purpose. 0.21 Cum ₹ 5,077.00 ₹ 1,066.17 6.3.8-B

Providing burnt brick masonry with 1:6 cement concrete duly plastered including watering,

11 stacking joint on exposed faces, rocking at joints on exposed faces and watering complete 2.94 Cum ₹ 3,772.00 ₹ 11,089.68 6.3.11

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for

the pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or

45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved

manner. ( for 7.5 & 8/8.5 mtr pole)

GARDEN ELECTRICAL

Supply of approved make FRP Pole having following specifications: FRP Light Pole made by

CNC filament winding machine using thermoset resin polyester/epoxy resin system) having

minimum 62% glass content. The pole should be in one piece and tapered round in shape, having

smooth finish and should be totally free from corrosion as well as non conductive & shock proof

Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material

duly painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented.

A highly weather resistant polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness

shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of

pole for the given load“ Pole should be generally made as per the dimensional data, performance 6.1.7(A)-4

criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest

version or ASTM D 4923/01 including cable termination box with necessary accessories . The

size of pole and type of installation with foundation as per manufacturer details and site

requirement are as below .

Suitable for direct grouting & Double Side Arm Bracket. 6.1.7-4

Overall Length of 7.0 meter, Average thickness : 8mm, Top/Bottom Outside Dia. 76/193mm

+/‐2.Weight of Pole 30.0 Kg approx. (Burial Depth 1000 mm) 0.00 Nos ₹ 17,437.00 ₹ 0.00 6.1.7-4-D

Providing and erecting Street Light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length

and suitable for 76.5 mm /80mm / required size of pole top having sufficient fasteners for fixing

14 the brackets and having spread of 1.5.mtr. length with 110 deg.with vertical plane & suitable 6.5.2-b

welded stays, reducer and with check nuts complete painted with one coat of Red oxide / PU

base primer and two coats of Aluminium / PU paint. paint with following nos of arms.

Triple Arm Bracket 1.5 Mtr 2.00 Nos ₹ 993.00 ₹ 1,204.00 6.5.2(b)-C

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

15 glass with company mark/name engraved or embossed 160 to 270 V,Power Factor more than 2.16.2

0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply

with over-voltage protection.

Above 60 to 90 watts 2.16.2-A-iii

Cat-lll 2.00 Nos ₹ 5,917.00 ₹

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor

16 for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road 4.4.2

crossing or floor of following size of cable.

LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate

clear/milky diffuser mounted on 3mm thick aluminium finished powder coated pipe with base

plate 160x160mm with erection by M8x75mm fastner with required RCC foundation.IP65 for

to 20 watt ,surge-4kv- cat-III

Supplying and Installation of Approved make Integrated LED Solar light fitting comprising in

built Poly crystalline solar panel,Lithium-ion 3.7 V battery, LED CRI Greater than 70, CCT-

18 6500K, 80 lum/watt all housed in Extruded Aluminium body,with motion sensor & auto on -off 2.17.2

device erected on existing pole with following specifications.

18 watt LED light, with 22 W Solar panel, 3.7 V 39500 to 40500 mAh battery, 1250-1350 lm

luminus flux,suitable for mount on 3.5 to 4 mtr height pole.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of

19 useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 125.10 Cum ₹ 128.52 ₹ 16,077.85 04002A

Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm

20 stone metal duly plastered with necessary curing for pole muffing or any other purpose. 2.78 Cum ₹ 5,077.00 ₹ 14,088.68 6.3.8-B

Providing burnt brick masonry with 1:6 cement concrete duly plastered including watering,

21 stacking joint on exposed faces, rocking at joints on exposed faces and watering complete 28.50 Cum ₹ 3,772.00 ₹ 1,07,502.00 6.3.11

Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for

the pole of size 60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or

45 cm dia x 45 cm) high upper ground level with necessary curing and finishing in approved

manner. ( for 7.5 & 8/8.5 mtr pole)

Providing and erecting metallic vitrified danger notice board as per language suggested by

engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for

single phase incoming and horizontal single phase outgoing 3.11.5-A

TOTAL ELECTRICAL LIGHT WORK - Rs. ₹

PROJECT : JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.09

MEASUREMENTS FOR INSTALLATION OF ELECTRICAL WORKS

Sr. Item Description Unit No Length Breath/ Depth/ Quantity Total

No. Width Height Quantity

LIGHT POLE FOR ROAD AREA

1 Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament

winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The

pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from

corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it

should be heavy duty, or MS Material duly painted with Epoxy paint. Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall

be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of

the length of pole for the given load“ Pole should be generally made as per the dimensional data, performance

criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D

4923/01 including cable termination box with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement are as below .

Suitable for direct grouting & Single arm

Overall length of 7.5 Mtr. Average 1 6 Nos

Thickness: 7.5mm.

Top/ Bottom OD Dia: 90/117mm ± 2mm

approx. approx. Weight of Pole 45 kg

Suitable for direct grouting & Double Side

Overall length of 7.5 Mtr. Average 1 8 Nos

Thickness: 8mm. Top/ Bottom OD Dia:

114/178 mm ± 2mm approx. approx.

Weight of Pole 52 kg approx.

2 Providing and erecting Street Light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm /

required size of pole top having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays, reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

Single Arm Bracket 1.5 Mtr 1 6 Nos

Double Arm Bracket 1.5 Mtr 1 8 Nos

3 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of

3 core 4 Sq. mm 1 1 375.00

4 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts

etc. complete of following sizes.

5 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

Above 60 to 90 watts

Cat-lll 1 14 Nos

6 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

single phase incoming and horizontal single phase outgoing

7 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge

for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Danger Notice Board 1 2 Nos

8 Providing and erecting C.I./M.S. flange type base plate of 300mm x 300mm x 6mm

Base Plate for Light Pole 1 14 Nos

9 Excavating hard Murrum or Metal road by chiselling for preparing pit for poles or earth plates or for laying

pipes & clearing the site by removing debris & making site good.

Excavation for Light Pole 1 14 Nos 0.60 1.500

10 Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal

duly plastered with necessary curing for pole muffing or any other purpose.

PCC for Light Pole 1 14 Nos 0.60 0.025

11 Providing burnt brick masonry with 1:6 cement concrete duly plastered including watering, stacking joint on

exposed faces, rocking at joints on exposed faces and watering complete

Brick Masonry for Light Pole 1 14 Nos 0.60 0.350

12 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size

60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole)

Concrete for Light Pole 1 14 Nos 0.60 1.200

GARDEN ELECTRICAL WORKS

13 Supply of approved make FRP Pole having following specifications: FRP Light Pole made by CNC filament

winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The

pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from

corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it

should be heavy duty, or MS Material duly painted with Epoxy paint. Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall

be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint.

Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of

the length of pole for the given load“ Pole should be generally made as per the dimensional data, performance

criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D

4923/01 including cable termination box with necessary accessories . The size of pole and type of installation

with foundation as per manufacturer details and site requirement are as below .

Suitable for direct grouting & Double Side

Overall Length of 7.0 meter, Average 1 6 Nos

thickness : 8mm, Top/Bottom Outside Dia.

76/193mm +/‐2.Weight of Pole 30.0 Kg

approx. (Burial Depth 1000 mm)

14 Providing and erecting Street Light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /80mm /

required size of pole top having sufficient fasteners for fixing the brackets and having spread of 1.5.mtr. length

with 110 deg.with vertical plane & suitable welded stays, reducer and with check nuts complete painted with

one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

Triple Arm Bracket 1.5 Mtr 1 2 Nos

15 Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE:

Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage

Above 60 to 90 watts

Cat-lll 1 2 Nos

16 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of

3 core 4 Sq. mm 1 1 925.00

17 LED Bollard fittings of minimum height 600 mm & dia.100mm having polycarbonate clear/milky diffuser

mounted on 3mm thick aluminium finished powder coated pipe with base plate 160x160mm with erection by

M8x75mm fastner with required RCC foundation.IP65 for 9 to 20 watt ,surge-4kv- cat-III

LED Bollards 1 1 115.00

18 Supplying and Installation of Approved make Integrated LED Solar light fitting comprising in built Poly

crystalline solar panel,Lithium-ion 3.7 V battery, LED CRI Greater than 70, CCT-6500K, 80 lum/watt all housed in

Extruded Aluminium body,with motion sensor & auto on -off device erected on existing pole with following

specifications.

18 watt LED light, with 22 W Solar panel, 3.7 V 39500 to 40500 mAh battery, 1250-1350 lm luminus

flux,suitable for mount on 3.5 to 4 mtr height pole.

Solar Street Lights 1 1 72.00

19 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for Light Pole 1 70 Nos 0.60 1.500

Excavation for Bollards 1 115 Nos 0.60 0.900

20 Providing cement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal

duly plastered with necessary curing for pole muffing or any other purpose.

PCC for Light Pole 1 70 Nos 0.60 0.025

PCC for Bollards 1 115 Nos 0.60 0.025

21 Providing burnt brick masonry with 1:6 cement concrete duly plastered including watering, stacking joint on

exposed faces, rocking at joints on exposed faces and watering complete

Brick Masonry for Light Pole 1 70 Nos 0.60 0.350

Brick Masonry for Bollards 1 115 Nos 0.60 0.200

22 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size

60 x 60 x 120 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper

ground level with necessary curing and finishing in approved manner. ( for 7.5 & 8/8.5 mtr pole)

Concrete for Light Pole 1 70 Nos 0.60 1.000

23 Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge

for MEDIUM VOLTAGE installation to be erected as per IS-2551.

Danger Notice Board 1 3 Nos

6 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for

single phase incoming and horizontal single phase outgoing

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.10

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR PLAY EQUIPMENTS-GYM EQUIPMENTS

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

Supplying and fixing in position outdoor gym equipment for public garden use (e.g., Double Air

Walker, Twister, Sit-Up Bench, Pull-Up Bar, Rowing Machine, Shoulder Wheel, etc.) made of

heavy duty MS pipe sections with powder coating, anti-rust treatment, weather-resistant finish,

bearings/fixtures, anchored firmly in PCC/RCC foundation as per manufacturer’s specification,

complete including installation, testing and handing over as per direction of Engineer-in-Charge.

Double Air Walker 1 Nos ₹ 30,000.00 ₹ 30,000.00 MR

Seated Twister (2 user) 1 Nos ₹ 25,000.00 ₹ 25,000.00 MR

Sit-Up Bench 1 Nos ₹ 20,000.00 ₹ 20,000.00 MR

Pull-Up / Chin-Up Bar 1 Nos ₹ 20,000.00 ₹ 20,000.00 MR

Rowing Machine (outdoor) 1 Nos ₹ 34,000.00 ₹ 34,000.00 MR

Shoulder Wheel 1 Nos ₹ 24,000.00 ₹ 24,000.00 MR

Multi-station combo (4 in 1) 1 Nos ₹ 1,10,000.00 ₹ 1,10,000.00 MR

2 PLAY EQUIPMENTS

Swings (2-seater stainless steel / SS frame) 2 Nos ₹ 18,000.00 ₹ 36,000.00 MR

Multi‐play unit / Jungle gym / Multi-play station 1 Nos ₹ 1,65,000.00 ₹ 1,65,000.00 MR

Slides (stainless steel or FRP) 2 Nos ₹ 30,000.00 ₹ 60,000.00 MR

Seesaw / Teeter-totter 2 Nos ₹ 21,000.00 ₹ 42,000.00 MR

Spring-rocker / Rocking toy (single / double) 1 Nos ₹ 11,000.00 ₹ 11,000.00 MR

TOTAL COST OF PLAY AND GYM EQUIPMENTS WORK- RS. ₹

JAN SEVA(NETAJI SUBHASH CHANDRA BOSE) GARDEN Sub Est. No.11

GUJ-SOR (2024-25) MARKET RATE

QUANTITY ABSTRACT FOR ART WORK

Item No. Item Description Quantity Unit Rate Amount Item Code Item Code

Supplying and installing sculpture / decorative statue in approved material (stone / metal / FRP /

bronze / fibre-reinforced concrete / sandstone etc.), of size and design as per approved drawing,

including foundation pedestal in RCC (with PCC base, reinforcement, finishing plaster /

cladding), anchoring, polishing / painting, surface finishing, lettering if any, cleaning and

handing over complete as directed by Engineer-in-Charge.

Small garden figurine-FRP/Fiber stone 5 Nos ₹ 28,500.00 ₹ 1,42,500.00 MR

Animal / human decorative statue-Sandstone/Marble 2 Nos ₹ 80,000.00 ₹ 1,60,000.00 MR

Artistic abstract sculpture-FRP/Stainless steel 2 Nos ₹ 1,00,000.00 ₹ 2,00,000.00 MR

Heritage / traditional statue-Bronze/Brass 1 Nos ₹ 2,05,000.00 ₹ 2,05,000.00 MR

Custom large landmark sculpture 2 Nos ₹ 4,00,000.00 ₹ 8,00,000.00 MR

TOTAL COST OF ART WORK- A RS. ₹