PROVN OF OTM ACCN FOR 140 OR, PROVN OF 01X TOILET CUM URINAL POINT, TOILET BLOCK WITH 04X IWC AND SPL REPAIR TO CERTAIN EM INSTALLATIONS AT HAWS GULMARG UNDER GE 969 EWS

Amount

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in hard dense soil, complete all as specified and as directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth for foundation, etc, and get out in soft soil/loose soil, complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm in any type of soil complete all as specified and as directed.

Removing excavated soil exc 250 m but not exc 500m and depositing where directed.

M&L for Hard core of gauge exc 63mm but not exc 100mm, deposited, spared and levelled in layers n exc. 15 cm thick, watered and rolled/ramed, complete all as specified and as directed.

M&L Plain Cement Concrete Type D2 (1:4:8), (using 40 mm graded stone aggregate) as in foundation, filling, and mass concrete, complete all as specified and as directed.

M&L 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring, complete all as specified and as directed.

M&L 50 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base of flooring, complete all as specified and as directed.

M&L 50 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded crushed stone aggregate) in plinth protection, complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surface including necessary form work 40 mm thick in cement concrete 1:2:4 type B-0 using (12.5 mm graded stone aggregate), complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4, complete all as specified and as directed.

M&L brickwork with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick on stone/Brick masonary surface or other than fair faces of brick work in cement mortar 1:6 mixed with water proofing compound. Note: WPC shall be measured and paid separately.

Supply only Liquid water proofing compound

M&L for preparing newly plastered surfaces of walls, applying two coats of distemper oil emultion, white tinted, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

S&F second class soft wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F FI 25x3mm for hold fasts Bands, straps, supports or stays for Including bolts, rainwater, ventilating pipes, including bolts if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made sliding bolts; clamps: hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 GDE E-165, complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed.

S&F second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge eto divided into squares with plain chamfered or rounded and rebated sash bars any numbers. In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b), complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows, complete all as specified and as directed.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and as directed.

S&F 300 mm long Mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts, complete all as specified and as directed.

S&F 100 mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11, complete all as specified and as directed.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed.

S&F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 100mm fabricated type anodized, complete all as specified and as directed.

S&F 4.8 mm thick Figured glass,pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification all as directed. Note: The quote rate shall be inclusive of following: (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side

S&F Factory Made Solid PVC Moulded Door Shutter, With Particle Wood Board Core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face. supplying & fixing in frame at site as per specification & drawing as per specification all as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and bracket fastenings and heavy framing (Beam, tee, angle, channel or flat sections) including distance pieces. cleats etc of GE 410 (Gde-E-250 quality-A), complete all as specified and as directed.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, complete all as specified and as directed.

S&F mild steel plates wind ties for roof including securing bolts and work confirming to Fe 290 Gde E-165, complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws, complete all as specified and as directed.

M&L Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed.

M&L for mild steel TMT Bars 10mm dia and over, quality, cut to length, bent to shape required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.

All as per above Item No. 37 herein before, but 5mm dia and over utp to 10mm dia in stirrups, spacers and binders.

Use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed.

M&L Reinforcement cement concrete Type M-30 (20mm graded crushed aggregate) as in footing, plinth band complete all as specified and as directed.

Use & waste Formwork to sides of columns complete all as specified and as directed.

M&L Reinforcement cement concrete Type M-30 (20mm graded crushed aggregate) as in columns complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.

M&L Reinforcement cement concrete Type M-30 (20mm graded crushed aggregate) as in, beams & lintels complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S&F PVC valveless, 10 liters syphonic action cistern, low level, white, with inlet, ball valve. float and including brakets and connection to pipes, complete all as specified and as directed.

S&F vitreous China Wash Basin white, flat back size 550x400 mm including bracket, waste coupling, waste pipe complete all as specified and as directed.

S&F in repairs 15 mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle fancy type screwed down, screwed for iron or brass ferrule and fixed but fancy type, complete all as specified and as directed.

S&F PVC floor trap, 100 mm outlet plain with grating including jointing to wast pipe and fixed with solvent cement, cement concrete 1:2:4 B1, complete all as specified and as directed.

S&F in repairs PVC gully trap with cover of size 125mm including PCC bed complete all as specified and as directed.

M&L for 75mm dia PVC (SWR) Pipe single socketed in any length with rubber joints fixed in walls.

S&F PVC (SWR) bends 75mm bore

S&F PVC (SWR) bends with access door 75mm bore

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore

S&F PVC (SWR) bends with access door 110mm bore

S&F PVC (SWR) 75mm dia vent cowl

S&F rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified and as directed.

S&F 3-layer PP-R Polypropylenerandom copolymer) 20mm dia pipe concealed pipes SDR 74 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and as directed.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-30 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M-30 / SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia and 3m depth. Complete all as specified and shown in drg No- CESZ/TD-1078/2011

M&L On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete all as specified for 20 users and as per manufacturer,instructions. Note: 1) Excavate the pit as per the size of Septic tank leaving side gap of "9" on all sides. 2) Level the bed and foundation in PCC. 3)Place the septic tank into the pit. 4)Fill sides with dry sand & bajiri and water it fully for effective compaction. 5) Do inlet & outlet pipe connection to the septic tank.

M&L reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete all as specified and as directed.

M&L precast RCC manholes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed.

M&L 1:2:4 types B-1 (using 20 mm graded stone agg as in coping etc complete all as specified and as directed.

Supplying, laying, jointing and testing XLPE insulated,armoured under ground heavy duty electric cable with stranded aluminium conductor, 1100 volts, grade nominal cross sectional area 16 sqmm 2 core laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified and as directed.

M&L PCC 1:2:4 B-0 (using 12.5mm graded aggregates) 25mm thick as in flooring finished rough for fixing of tiles, complete all as specified and as directed.

M&L machine cut Kota stone slab flooring 20-25mm thickas per sample kept in GE's office, laid over and incl 15mn thick cement screed base in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polshing to acheive mirror finish complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonary or boulder masonary built in cement mortar complete all as specified and as directed.

M&L for walling of random rubble uncoursed well bonded bedded and solidly hearted slate stone localiy available stone built in CM 1:6, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 finished with even and smooth w/o using extra cement, complete all as specified and as directed.

Preparing of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of white wash, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof Coverings in any position, complete all as specified and as directed.

S&F 0.63 mm thick grade with 275 gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugation side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof, complete all as specified and as directed.

S&F 0.80mm thick grade Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings, complete all as specified and as directed.

Preparing new zinc (or galvanized) surfaces to receive painting by coating with mordani solution including Washing and cieaning etc. of. any description, over 10cm width or girth, not otherwise described and applying two Coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Preparation of new steel and iron surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 mm graded crushed stone aggregate) in plinth protection, complete all as specified and as directed.

Demolition RCC any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L RCC M-30 for (20 mm Graded crushed stone aggregate ) in Slabs supported on walls, beams and columns in floors. roofs, landings, balconies, canopies, deck slabs and in shelves, complete all as specified and as directed.

Demolition and breaking up 300 mm dia (Salt Glazed ware, AC or Reinforced concrete) pipe jointed in cement mortar and disposed off the premises all as directed.

M&L reinforced concrete pipes 450 mm bore, class NP3, laid and jointed complete with collars laid in trenches and jointed in CM 1:1 complete all as specified and as directed.

M&L for concrete drain bed to drain pipe of 450 mm including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2, using 40mm graded aggegate complete all as specified and as directed.

S&F Steel rolling shutters, 1.00 mm thick with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type including fitted to wall/columan, complete rolling top to bottam complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters, complete all as specified and as directed.

S&F Ball bearing for roling shutters, complete all as specified and as directed.

S&F 250mm long MS sliding door bolt with hasp, staple (bolt type)and fixing clips of sheet,and fixing bolts and sliding bolts of stove enameled black including necessary nut and bolts, complete all as specified and as directed.

M&L 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded crushed stone aggregate) in sub base of flooring, complete all as specified and as directed.

M&L for Joint free Non - skid Ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and incl 15mm thick bedding layer in CM 1:6, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 450 x 350 x 7 to 8mm thick colour and design (as approved) in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 15mm thick cement plaster using CM (1:4), complete all as specified and as directed.

S & F Vitreous china urinal, Full Stall type flat back white (minimum), with grating and union for discharge pipe, complete all as specified and as directed.

S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor.

S&F towel rail 450mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 170 gms).

S&F15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F PVC (SWR) 110/75 mm 'S' trap.

S&F rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified and as directed.

S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe, complete all as specified and as directed.

S&F 20 mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm.

S&F 15mm dia angle stop valve of PTMT any colour high pressure screwed for for iron pipe and fixed.

M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.

S & F 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed.

Material & Labour for fine and dry river sand in trenches including spreading for cushioning of LT UG cable and punning down complete all as specified and as directed. Note : Punned thickness of sand layer shall be measured and paid to contractor. Punned layer thickness to be paid as per SSR Part I

Material & Labour for sub class bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trenches complete all as specified and as directed.

M&L for cutting and inserting GI pipe in 40mm to 20mm with suitable arrangement with inserting tee complete all as specified and as directed.

Surface dressing n.exc 15 cm deep in soft/loose soil.

S&F 150 mm long MS barrel tower bolts stove enameled black with bright bolt, complete all as specified and as directed.

S&F pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore, complete all as specified and as directed.

Perparation of new or previously untreated steel surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS Copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including PVC board with bakelite sheet and PVC insulated FRLS Cable of size 1.5 Sqmm as earth continuity conductor.

(a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way

(b) One 3 pin 5 Amp switch socket outlet on independent board

S&F Socket outlet 2 in 1, 3 pin, 5A, Complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Samm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed.

Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal omplete all as specified and as directed.

S&F LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and as directed.

S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, Complete all as specified and as directed

S&F LED Lamp 7 W 240V,50 Hz AC PF 0.95

S&F Distribution Board SPN 8 Way double door with 200 Amps neutral link complete all as specified and as directed.

S&F amp rating 240V, 10KA C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. SPN 32 Amp, complete all as specified and as directed.

S&F exhaust fan, plastic body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers, complete all as specified and as directed.

S&F 240V, 10 KA "B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and as directed.

Taking down copper aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

S&F in repair LED bulb thread/pin type of capacity 10 Watt.

S&F LED lights fitting 1x 20w, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in repair MCB DB 4 way sheet metal enclosure SPN 240 voits, 50 Hz, with lP 42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified and as directed.

S&F in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity 16 Amp SPN in the MCB DB complete with connection |testing and commissioning.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specifed and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type Ci chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm cc in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia Gl pipe light grade for watering complete all as specified and as directed by ngineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Supplying, laying Tubes Medium grad' galvanised, 20MM with all fitting:laid in trenches, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.

M&L Cutting and inserting existing GI 50 mm Pipe with suitable arrangement complete all as specified and as directed.

S&F Gate Valve 20MM Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.

Uninstall hot water Generators along with accessories from plinth and keep it with safety from rain and harsh weather conditions at safe place away from plant house remove safely from plant house with the help of crane/labour without any damage to the hot water generators. Note : If any damage occurs during the un installation is paid by the contractor.

Re install testing and commissioning hot water Generators along with accessories after plinth construction and keep it with safety with the help of crane/labour. Note: (i) After Re installing Engr in Charge testing the hot water generators at least 6 hours (ii) Fuel for starting and testing will be provided by the contractor.

Repair/replacement of pump of capacity 3 HP with material like mechanical seal, bearing washers etc and rewinding of electrical motor if required complete all as specified and as directed.

Repair/replacement of pump of capacity 5 HP with material like mechanical seal, bearing washers etc and rewinding of electrical motor if required complete all as specified and as directed.

Welding work for MS water storage tank to prevent leakages etc complete all as specified and as directed.

Note:- Schedule of credit Rs. 17,802.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S G M DAR AND SONS