Loading…
Loading…
Tender Value
₹6.6 L
EMD Value
₹14,000
Closing Date
2 Jul 2026, 6:00 pm5d left
Similar tender results from the same govt authority in the past 3 years.
Gujarat state Police Housing Corporation Ltd. Rajkot
Special Repairs to Chitravad Outpost and Police Staff Qtrs. B-24 Block No-01 (First Floor Unit. no-06) & Block No.2 (Ground Floor Unit. No-14) in Jasapar Police line & Special Repairs to Police Station at Upleta Dist:- Rajkot (Including Electrification Work) (6th Attempt) (SBD)
313590
03 of 2026-27 Sr. No. 05
Open
Civil Works - Buildings
Rajkot
12 documents required · 9 mandatory · 3 optional
₹900
Gujarat State Police Housing Corporation Ltd
₹14,000
12 Jun 2026
12 Jun 2026
12 Jun 2026
2 Jul 2026
12 Jun 2026
Name of Work :- Special Repairs to Chitravad Outpost And Police Staff Qtrs. B-24 Block No-01 (First Floor Unit. no-06) & Block
No.2(Ground Floor Unit. No-14) in Jasapar Police line & Special Repairs to Police Station at Upleta Dist:- Rajkot( Including
Electrification Work)
Statement showing the approximate quantities for the items of the above work to be carried out and
Cost put to Tender for Rs.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
(A) CIVIL WORK:
Dismentaling tiled of stone floors laid in mortar including stacking of serviceable Rupees Fifty and Paisa
1 materilas and disposal of unserviceable materials with all lead and lift. 50.00 Sqm 50.94
Ninety Four Only
Dismantling existing plaster racking out joints and cleaning the surface for plaster at all
Rupees Twenty and
2 heights including disposal of rubbish to the dumping ground within of any lead. 131.00 Sqm 20.63
Paisa Sixty Three Only
Dismentaling of sheet roofing including ridges, Hips,Valleys, Gutters etc. stacking of
serviceable materilas and disposal of unserviceable materials with all lead and Rupees Fifty and Paisa
lift.(i)G.I.sheet roofing. Ninety Four Only
Providing and laying cement concrete 1:5:10 ( 1 cement ; 5 coarse sand; 10 M/C stone Rupees Two Thousand
aggregates 40mm nominal size) and curing complete excluding cost of form work in Five Hundred Fifty One
Foundation and Plinth. and Paisa Fifty Seven
Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and Rupees Two Hundred
5 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 14.00 Sqm 220.04 Twenty and Paisa Four
coat of neat cement slurry AT GROUND FLOOR. Only
Providing 10mm. thick cement plaster in single coat on ceiling for interior plastering and Rupees Two Hundred
6 finished even and smooth in C:M 1:3 (1 cement; 3 sand) including finishing with a floating 7.00 Sqm 247.76 Fourty Seven and Paisa
coat of neat cement slurry AT FIRST FLOOR. Seventy Six Only
Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and Rupees Two Hundred
7 finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating 37.00 Sqm 219.70 Nineteen and Paisa
coat of neat cement slurry AT GROUND FLOOR. Seventy Only
Providing 15 mm. thick cement plaster in single coat on wall for interior plastering and Rupees Two Hundred
8 finished even and smooth in C:M 1:4 (1 cement; 4 sand) including finishing with a floating 31.00 Sqm 249.50 Fourty Nine and Paisa
coat of neat cement slurry AT FIRST FLOOR. Fifty Only
Providing 20mm thick SAND FACED cement plaster on walls above ground level
consisting 12mm thick backing coat of C:M 1:3 (1 cement; 3 sand) and 8mm thick Rupees Three Hundred
9 finishing coat of C:M 1:1 (1 cement; 1 sand) etc. complete for any height.(Gutka Plaster) 57.00 Sqm 327.45 Twenty Seven and Paisa
Fourty Five Only
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring over
20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface
Rupees One Thousand
orfixing on existing flooring by adhesive including dismentaling of existing flooring and
Seven Hundred Ninety
10 material jointed with color cement slurry including finised with flush pointing & cleaning 33.00 Sqm 1793.53
Three and Paisa Fifty
the surface etc.Completed Brand of the tiles shall be as per approved make list of
GSPHCL. Shade & Size of tiles shall be as specified in tender item.
Providing & Laying 24" x 24" in Skirting riser of steps and dado Double Charge
vitrified 8 to 10 mm thick tile over 10 mm thick Cement plaster of cement mortar 1:3 (1 Rupees One Thousand
cement: 3 coarse sand) jointed with color cement slurry including finised with flush Four Hundred Fourty
pointing & cleaning the surface etc. complete Brand of the tiles shall be as per approved Five and Paisa
make list of GSPHCL. Shade & Size of tiles shall be as specified in tender item. Nineteen Only
Providing & laying 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base
of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing Rupees One Thousand
flooring by adhesive material including dismentaling of existing flooring and jointed with Four Hundred Fifty Eight
color cement slurry including finised with flush pointing & cleaning the surface etc. and Paisa Thirty Three
complete for antiskit Size-600 X 600mm Only
Providing & laying Printed / Coloured GLAZED TILES 8 mm thick in skirting, risers of Rupees One Thousand
steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & One Hundred Sixteen
13 jointed with white cement slurry. Size 300 x 600mm 16.00 Sqm 1116.32
and Paisa Thirty Two
Providing and fixing 30mm thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER
consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x
19mm for stiles and 15mm x 15 mm for top and bottom rails. M.S. frame shall have a coat
of steel primers of approved make and manufacture, M.S. frame shall be covered with
mm thick heat moulded PVC ‘C’ channel of size 30 x 50 mm forming stiles, and 5mm
thick 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and Rupees One Thousand
14 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom 1.50 Sqm 1135.02 One Hundred Thirty Five
rail, Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet beading on and Paisa Two Only
eighter side, and joined together with solvent cement adhesive,. An additional 5mm thick
PVC strip of 20mm width is to be stculk on the interior side of the ‘c’ channel using PVC
solvent cement adhesive etc. complete as per direction of Engineer in charge,
manufacture’s specification and drawing.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
Providing and fixing factory made polyvinyl chioride (PVC) door frame of the size 50 x
mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre
out of two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.s.
Square tubes. The two vertical door profiles are to be reinforced with 19 x 19 mm m.s.
square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out Rupees Three Hundred
15 the frame. The door frame shal be fixed to the wall using 65/100 mm long M.S. screws 1.50 Sqm 314.88 Fourteen and Paisa
through the frame by using PVC fasteners. A miniumum of 4 nos. os screws to be Eighty Eight Only
provided for each vertical members and minium 2 nos. for horizontal members etc.
complete as per manufactures specification and direction of Engineer in charge.
Removing and refixing after repairing door,window,cup board,ventilator shutter & Rupees Three Hundred
16 repair frame with providing necessary wood corner M.S. plate support,hinges 18.00 Sqm 321.78 Twenty One and Paisa
etc.complete. Seventy Eight Only
Providing and Laying Water Proofing Chemical treatment in two coats of vertical and
horizontal surface of DR Fixit SBR Latex or its equivalent as directed by engineer in Rupees Eighty Four and
charge.This treatment shall be carried out over & above China Mosaic Paisa Twenty Nine Only
Celling painting (two coats) with plastic emulsion paint and manufacture on undecorated
wall surface to give an even shade including throughly brushing the surface free from
mortar droppings and other foreign matter and sand papered smooth With Applying two Rupees One Hundred
18 coats of Fine Putty & One coats of primer and manufacture on new wall surface to give an 110.00 Sqm 196.17 Ninety Six and Paisa
even shade including thoroughly brushing the surface free from mortar dropping and Seventeen Only
other foreign matter and sand papered smooth. paint, primer and putty shall be as per
approved make list of GSPHCL
Wall painting (two coats) with plastic emulsion paint and manufacture on undecorated
wall surface to give an even shade including throughly brushing the surface free from
mortar droppings and other foreign matter and sand papered smooth With Applying two Rupees One Hundred
19 coats of Fine Putty One Coat of Primer and manufacture on new wall surface to give an 331.00 Sqm 185.40 Eighty Five and Paisa
even shade including thoroughly brushing the surface free from mortar dropping and Fourty Only
other foreign matter and sand papered smooth.paint, primer and putty shall be as per
approved make list of GSPHCL
Finishing wall with Weather proof exterior emulsion paint on wall surface (Two Coat) over
and above applying one coat of primer to give an required shape even shade after
throughly Brushing This surface to remove all Dirt and remains of loose poweder material Rupees One Hundred
20 etc. complete. Primer shall be exterior weather coat and Paint shall be Appex Weather 95.00 Sqm 155.21 Fifty Five and Paisa
Proof Emulsion Only Paint and primer shall be as per approved make list of GSPHCL. Twenty One Only
Painting Two coats (excluding priming coat) on previously painted steel and other
Rupees One Hundred
metal surface with enamel paint, brushing, to give an even shade including cleaning the
21 50.50 Sqm 102.41 Two and Paisa Fourty
surface of all dirt, dust and other foreign matter.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
Painting Two coats (excluding priming coat) on previously painted wood and wood Rupees One Hundred
22 based surface with enamel paint, to give an even shade including cleaning the of all 29.00 Sqm 118.09 Eighteen and Paisa
dirt, dust and other foreign matter. Nine Only
Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 )
PIPE having National Sanitation foundation ( NSF ) seal for potable water of following dia Rupees Two Hundred
23 nominal bore tube fitting and clamps including of making good the wall ceiling & floor etc. 14.00 Rmt 206.73 Six and Paisa Seventy
Complete (excavation of earth in trenches and filling will be paid separately)[B] 20 mm Three Only
Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 )
PIPE having National Sanitation foundation ( NSF ) seal for potable water of following dia Rupees Two Hundred
24 nominal bore tube fitting and clamps including of making good the wall ceiling & floor etc. 23.50 Rmt 251.31 Fifty One and Paisa
Complete (excavation of earth in trenches and filling will be paid separately)[C] 25 mm Thirty One Only
Providing & fixing to Concealed center point to wall, ceiling & floor CPVC ( SDR 13.5 )
PIPE having National Sanitation foundation ( NSF ) seal for potable water of following dia Rupees Three Hundred
25 nominal bore tube fitting and clamps including of making good the wall ceiling & floor etc. 35.00 Rmt 334.89 Thirty Four and Paisa
Complete (excavation of earth in trenches and filling will be paid separately)[D] 32 mm Eighty Nine Only
Providing and fixing U.PVC/SWR nahni trap of the following nominal dia self cleaning
Rupees Five Hundred
design with top tile and strainer including cost of cutting and making good the wall and
26 1.00 No. 595.98 Ninety Five and Paisa
floors 100mm inlet and 50mm outlet including 150mm x 150mm stainless steel jali.
Ninety Eight Only
Providing and Fixing. S.W.Gully trap without C.I.grating brick masonry chamber & water Rupees One Thousand
tight C.I.cover frame of 300mm x 300mm size (inside) with standard weight (I) square One Hundred Seventy
27 mouth trap 150mm x 100mm size of 'P' or 'S' type. 1.00 No. 1176.94
Six and Paisa Ninety
Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class SN8 Structured
Wall polyethelene Piping systems (Pipe with online/offline coupler and elastomeric
sealing ring) with non-smooth External Annular Corrugated and Smooth Internal Surfaces
(Double Wall) for non-pressure underground Sewerage & Drainage application as per
EN:13476-3 including all local and central taxes, transportation, freight charges, octroi,
inspection charges, loading, unloading, conveyance to the departmental stores etc.
complete. (100mm ID Dia) Including Lowering, laying and jointing of class SN
structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Rupees Two Hundred
28 Piping and fittings with the help of coupler ( on line / off line ) attached with one end of 3.00 Rmt 229.00
Twenty Nine Only
pipes, sliding over the elastomeric sealing rubber ring placed on the specified valley of
the corrugation at the spigot end, lowering the same into the trench, laying on the lower
bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment
,testing the water tightness of the joints, ensuring the continuity tests of specified pipe
segments etc. complete as per drawing,specifications & detailed engineering, including
carriage of pipes & fittings from site stacks to the place of laying etc. as per direction of
Engineer-in-charge.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.
Rupees Six Hundred
29 2.00 No. 656.86 Fifty Six and Paisa
Eighty Six Only
Providing & Fixing 15mm One way BIB Tap with wall flange Rate are inclusive of all
material ,Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Rupees Nine Hundred
30 Specifications and as per the instruction of Engineer incharge. The model & Make of bib 15.00 No. 990.61 Ninety and Paisa Sixty
tap shall be as per the approved Make List of GSPHCL One Only
Providing and fiixng water closet squatting pan (ORISSA TYPE W.C. PAN) size 580 mm
Rupees One Thousand
first quality including necessary 'P' or 'S' trap including jointing the trap with pan & soil
Three Hundred Fifty
31 pipe in cement mortar 1: 1 (1 cement : 1 sand ) in vitreous china white colour. 1.00 No. 1354.44
Four and Paisa Fourty
Providing and fixing Wash Basin shall be as per the approved Make List of GSPHCL
single hole for piller tap with C.I or M.S. brackete painted white including cutting holes
and making good the same but including fitting (A) Vitreous chaina :(II ) Flat back wash
basin 515mm x 410mm size in white colour including provinding and fixing C.P. brassa Rupees Three Thousand
waste coupling 32mm dia P.V.C water pipe M. I . fisher union 32mm dia C.P brass Pillar Nine Hundred Thirty Five
32 Cock 15mm dia shall be as per the approved Make List of GSPHCL Complete including 2.00 No. 3935.33
and Paisa Thirty Three
PVC connection pipe from STOP COCK Heavy Duty with Exposed part and other Only
accessories 15mm dia shall be as per the approved Make List of GSPHCL to pillar tap
and 32mm dia waste pipe up to N.T etc. Complete. with 40mm dia c.p brass waste and
M.I fisher and 15mm dia pillar cock.
Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling
with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Rupees Two Thousand
33 Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specification 1.00 No. 2098.98 Ninety Eight and Paisa
Ninety Eight Only
Constructing brick masnory chamber for under ground C.I.Inspection chamber and bends
with Brick having crushing strength not less than 35 Kg/Sq.cm.in cement mortar 1:5,RCC
top slab with1:3:6 in cement mortar 1:5 ( cover with 8 mm dia. steel @ 15 c/c and R.C.C.
top slab with 1:2:4 mix ( 1 cement : 2 coarse sand,4- stone aggregates 20mm nominal
size) foundation cocrete 1:5:10 inside laster 15 mm th. c:m 1:3 finished smooth with a Rupees Three Thousand
floating coat of neat cement on walls & bed concrete etc. complete. Rate are also Seven Hundred Ninety
inclusive of outside plaster 15mm thick in C.M 1:3 from top of chamber and all side upto Three and Paisa
45cm deep below ground level (I) inside dimensions 455mm x 610mm and 450mm deep Eighteen Only
for Single or multi purpose pipe line. Rate Also Inclusive RCC Frame with cover MD
ton (Rubber mould Finish) Inner Size 600 x 450mm with all necessary fittings
Extra over above item for every additional depth of 0.1mtr. or part thereof beyond 450mm
Rupees Two Hundred
depth for Brick masonry chamber.
35 2.00 No. 239.99 Thirty Nine and Paisa
Ninety Nine Only
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
Providing,fabricating and fixing of M.S. grill/Gate of approved pattern fabricated from
M.S.flat , square bars, round bars,C-channel, box pipe as per detail Drawings.Rate is
inclusive of welding with grinding smooth surface ,two coat of Oil paint and one coat of Rupees Seventy Three
36 yellow Zink chromate primer coat of approved brand only.Oil paint shall be Luxol Enamel 254.00 Kg. 73.94 and Paisa Ninety Four
paint of Berger Paint India Ltd. or Asian paint Apcolite premium gloss Enamel of Asian Only
paint or Dulux premium gloss enamel of Dulux paint Only M.S. grill/Gate material
Structural steel should be ISI Mark only.
Provinding and Fixing Steel Cupbord Shutter with frame (18 Gauge) of required size
including one coat of primer and two coat of oil painting etc complate with loking Rupees Eight Thousand
37 arranjment, handles etc complete for all floor. 26.00 Sqm 8030.73 Thirty and Paisa
Seventy Three Only
Providing and fixing corrugated asbestos cement sheets roofing fixed with G.l. plain
Rupees Two Hundred
and bitumen washers complete cost of purlins, rafters and trusses 7mm thick
38 78.00 Sqm 271.40 Seventy One and Paisa
corrugated Asbestos Sheet (lSI) includingmaking good to the base frame structure
as and when necessary.
39A Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. mm copper PVC
insulted FRLS wire with 1.5 sq. mm (green) copper PVC insulated FRLS wire for earth continuity in
FIA approved ISI mark medium class white colour 20/25 mm dia. embossed rigid PVC pipe with
PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab along with continuous G.I.
fish wire to draw wires and laid in approved manner complete with approved make 5/6 Amp. ISI Rupees Four Hundred
make modular type switch and accessories mounted in 20 G. G.I. company fabricated metallic / 6.00 Point 425.00
Twenty Five Only
PVC / Acrylic box covered with appropriate front plate modules erected flushed with wall / ceiling
with necessary modular lamp holder / modular ceiling rose / HD Connector (make & model
approved by EIC and matching colur with switches accessories) as directed for open wiring.
Light point. Cat.-II.
Length of point wiring must not increase than 10 mtr. For that necessary switch boards and their
locations must be finalised before execution by agency otherwise payment will not be done for
extra long point. (For future extention, if required, agency has to erect one higher size metal box
and modular plate as per instruction of EIC. Cost of blank plate shall be paid as per tender item)
For Fan Point (with 6 A. Modular type switch and two module hum free EME Five step type Rupees Six Hundred
Electronic fan regulator both having ISI mark) Cat.-II Twelve Only
For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI mark) Cat.-II Rupees Four Hundred
Fifty Five Only
For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI mark ) Cat.-II. Rupees Two Hundred
Thirty Four Only
40 Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID
PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed
Rupees Twenty Four
with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains 60.00 Mtr. 24.00
with necessary fittings and junction boxes for following dia. 20 mm. dia.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
41A Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade with FIA
approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting
fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I. fish
wire to draw mains laid in approved manner with plastering by cement mortar & finishing the
surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity. 100.00 Mtr. 56.00 Rupees Fifty Six Only
(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains
with 1.5 sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code.
(Conductor resistance should be as per IS:8130/1984)
41B 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 sq.mm. FRLS copper multi
Rupees One Hundred
stranded conductor for earthing as per standard colour code. (Conductor resistance should be as 60.00 Mtr. 140.00
42 Providing & fixing 20 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary
socket, PVC bushes saddle, Check-nuts etc. complete of following sizes. Rupees Thirty and
Paisa Ninety Five Only
43 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x
sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS
wire for earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia.
embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected on/in wall/slab along
with continuous G.I. fish wire to draw wires and laid in approved manner complete with 16 Amp Rupees Six Hundred
Modular type Swich and accessories mounted in 20 G. GI company fabricated metallic / PVC /
Seventy Eight Only
Acrylic box covered with appropriate front plate modules erected flushed with wall. (a) 16 Amp.
Indicator switch & 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly
both having ISI mark. Cat.-II.
44 Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in
soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made
from Corrosion free Hot dip galvanizing pipes having following specification.
(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI mark of Reputed Brand,
Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI mark reputed Brand Terminal Size: 70mm X
100mm length, Terminal Should be made from inner pipe for that pipe must be pressed and gave
rectangular shape so its work as a terminal.The hot deep galvanising must be done after above
process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:- 2 no.with
washer suitable for 14mm dia. hole must be provided at terminal. total minimum Weight(approx.) of
earth electrodewith inside conductive material minimum should be 26 kg.
1.00 Each 7025.00 Thousand Twenty Five
(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing as per IEC 62561-2017,
Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%
(C) Back fill Compound:- Earthing compound should be capable to retain moisture for long time
Back Filling Compound weight is 25 Kg.
(D) Chamber and cover:- Earthing chamber should be size of 400 mm X 400 mm X 400 mm depth
and Cover should be heavy duty cast iron with required size of 300 mm X 300 mm X 4 mm thick.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
Necessary test report must be submitted.
1. Short circuit test by ERDA/ CPRI for 25KA
2. Resistivity test of conducting material from NABL accredited lab.
3. Hot dip galvanised / zinc coating micro test from reputed laboratory.
4. General test report from OEM regarding specification of earthing.
[Make and model approved by EIC Strictly subject to item specification only] [OEM has to submit
all detail & sample for approved before supplying]
[Water must be poured in bore before starting earthing. Earthing value must be measured with
earth tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between
neutral & Earthing upto 02 volt. Agency has to maintain earthing & its value for one year. Earthing
must be done in the presence of A.E. (GSPHCL)]
45 For above earthing additional charges for boring in hard rock soil (by breaker) & filling soft soil in
earth pit (certificate for soil have to given by DEE / AE along with photographs) Rupees Two Hundred
Seventy Six Only
46 Supplying & erecting LED indoor fitting of approximately 4 feet long with LED of wattage 0.2W to
0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Aluminum
exttusion having enough strength (Sample must be approved by EIC) With Polycarbonate diffuser
With Following Specification
(1) Company Mark/Name on the Fitting
(2) Rated input voltage and frequency 220V to 2240 VAC,50Hz
(3) Rated input wattage max 24 W
(4) Rated input current ; 0.2 Amp.
(5) Power Factor : Min.0.90 Rupees Three Hundred
(6) ATHD : Max. 15% Seventy Only
(7) Rated Luminous flux : Min. 2420 lm
(9) CRI : Min/ 80 Ra
(10) Driver Effciency : min. 80%
(11) LED life span : Min. 50000 Hrs @ L70
(12) Over Voltage Protection : Withstand up to 440 V/AC for 4 Hrs.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
(13) Surge Protection : Min.2 KV
(14) IP rating : IP
(15) IK rating : IK
(16) Short circuit, Open Circuit & Reverse Polarity must be provided
(17) Fixing clamp design & strength should be sufficient to hold the fitting erected on wall
(18) 3 core copper wire of appropriate size with earthing connector (Note:-The
manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free
replacement Guarantee for complete Fixture) Approval will be given strictly subject to item
47 Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage,
minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, mounting Rupees One Hundred
suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser Eleven Only
suitable Lamp holder.
48 Poviding and erecting max.10 Watt LED battern having main housing aluminium extruded & front
cover of polycarbonate. Electrically & photomatry parameters are as under : 240V, 50 Hz., System
voltage : 10w ± 10% PF ≥ 0.95 , system lumens min. 1000, CCT;3000K to 6500K,CRl≥ 80, THD ≤
Rupees Three Hundred
15 % ,Delivery efficieny ≥ 85 %, LM 80 certified LED, 30000 hrs. @ L70, Electronic CC driver, 6.00 Each 309.00
insulated copper wire for internal wiring, IP 20, Operating voltage : 160 to 270 V , surge - 2 KV,
length of this fitting should be 2 ft. (Make and model approved by EIC only and strictly as per
specification only)
49 Providing and erecting Polycarbonet body surface mounting LED Bulk head type 9 watt Lighting
Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen output from
luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt Rupees Seven Hundred
driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL frame with 2.00 Each 780.00
Beam Angle 120 deg.
50 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I,
Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating
Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM:
minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of heavy duty
premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:
Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12) Canopy: Two
Nos. Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-1984, Aluminium Rupees One Thousand
body premium quality, Branded make,(14) Down road: up to 1.0 mtr as per site requirment, (15) 5.00 Each 1929.00 Nine Hundred Twenty
Required fixing accessories, (16) 3 core 0.75 sq.mm ISI wire as per site requirment, (17) No Nine Only
vibration and noise due to mechanical parts. (Agency has to erect safey wire with ceiling fan and
checked with EIC) (OEM has to approved model as per tender specification and tested at ERDA)
(Necessary test reports should be submitted strictly at the time of approval. Sample approved by
EIC subject to above specification only)
51 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with Rupees Ninety Eight
necessary hook of 10 mm M.S. Round Bar.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
52 Supplying & Erecting Decorative Ding Dong bell Stereo type 250 Volt complete erected on
Rupees One Hundred
existing polished wooden block or in M.S. box with 3mm thick white ISI mark laminated sheet. 2.00 Each 170.00
[Anchor (Chime model), vision, rider Make]
53 Providing & Erecting 3 mm thick Polycarbonate (PC) sheet with grooving as directed
500.00 Sq. Inch 3.00 Rupees Three Only
54 Providing & erecting 240 V MCB Double pole switch for Motor & Inductive load (C curve)
Rupees Three Hundred
having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following 3.00 Each 327.00
capacity. For 40 Amp.
Twenty Seven Only
55 Supplying & fixing box for housing RCCB + MCB combination made of 18 SWG sheet steel duly
powder coated with gasket, dust & vermin proof bakelite shield two earthing terminals for following
Rupees Two Hundred
type of RCCB, RCCB + MCB [a] For 2 pole [Same company metal box used as MCB / ELCB 3.00 Each 272.00
used with earthing terminal with necessary Numbering / marking with oil Paint by painter]
Seventy Two Only
56 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant
indian standards ammended upto date.
Supplying and fixing following way single phase MCB distrubution board of company fabricated
sheet box with powder coated inside and outside after apply seven tank chemical process of
CRCA sheet cover complete with suitable integral single piece construction tinned copper busbar
and link with all necessary interconnection and with necessary size MS frame for mounting
MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of 1.2 mm thick CRCA
Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having
D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make Rupees Four Thousand
neutral & Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess complete 2.00 Each 4906.00
Nine Hundred Six Only
with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size
FRLS PVC insulated copper conductor up to terminal blocks and internal connection, tinned
coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar, detachable
gland plate, interconnections, powder painted including earthing etc. Single phase incoming and
horizontal single phase outgoing.
For 12 Way MCBDB: Including MCB DP 40 Amp. 30 mA double pole ELCB (ELCB
confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA),
MCB 40 Amp. double pole switch (C curve) and S.P. MCB of rating 6 to 32 Amp. with NL
suitable to operate on 230 Volt A.C. power. (6 Amp:- 3 Nos., 16 Amp:- 3 Nos. & 25 Amp:
Nos.) (The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be
erected in line & level with spirit level and finish the external edge with box cutting plaster) (Same
colour MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering /
marking on box done with red colour radium sticker as per site requirement and instructions given
by EIC on site. Font / number size given by EIC on site as per requirement]
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
57 Providing ad erecting approved make single phase Double Door metal clad D.B. as per relevant
indian standards ammended upto date.
Supplying and fixing following way single phase MCB distrubution board of company fabricated
sheet box with powder coated inside and outside after apply seven tank chemical process of
CRCA sheet cover complete with suitable integral single piece construction tinned copper busbar
and link with all necessary interconnection and with necessary size MS frame for mounting
MCBDB. MCBDB Door, Back side and Body of MCBDB must be made of 1.2 mm thick CRCA
Sheet. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having Rupees Four Thousand
D type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned Copper/Brass make 1.00 Each 4125.00 One Hundred Twenty
neutral & Earthing link with isolation & Protecting Cover for 240 Volts on surface / recess complete Five Only
with loose wire box, terminal connectors for all incoming and outgoing circuits, with suitable size
FRLS PVC insulated copper conductor up to terminal blocks and internal connection, tinned
coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din bar, detachable
gland plate, interconnections, powder painted including earthing etc.
Single phase incoming and horizontal single phase outgoing. For 8 Way MCBDB: Including 1 no.
40 Amp. 30 mA double pole ELCB (ELCB confirming to IS:12640/1988 having sensitivity of 30 mA
and breaking capacity of 10 KA), 1 no. MCB 40 Amp. double pole switch (C curve confirms to
IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with NL suitable
to operate on 240 Volt A.C. power. (6 Amp to 25 Amp: 4 Nos.)
(The DBs should be used of same company of MCB / ELCB to be used) (MCBDB must be erected
in line & level with spirit level and finish the external edge with box cutting plaster) (Same colour
MCB(SP/DP) should be used as same as MCBDB) [Including Necessary numbering / marking on
box done with red colour radium sticker as per site requirement and instructions given by EIC on
site. Font / number size given by EIC on site as per requirement]
58 Providing and erecting following type of Modular Type Accessories mounted with 20 G company
fabricated metalic box, single mounting base frame covered with textured / metallic front plate,
5.00 Each 16.00 Rupees Sixteen Only
modules erected with necessary connection. As desired by Engineer in charge.Blank Plate
Single. Cat.-II.
59A Point wiring for on board looped PLUG with tissino type single pole ISI marked Switch and Socket
erected with necessary connections erected on wooden /Metal/ PVC Box covered with 3 mm
4.00 Each 66.00 Rupees Sixty Six Only
thick PC(Polycarbonate) /Acrylic sheet for open / concealed wiring for following size.For 6 Amp.
59B For 16 Amp. Rupees One Hundred
60A Providing & Erecting following Shockproof tissino type accessories erected on 3 mm thick PC
(Polycarbonate) sheet in PVC/ Metal/Wooden Box. erected on wall/ ceiling. (1) One no Single 20.00 Each 31.00 Rupees Thirty One Only
pole 6 A Switch / Bell push
60B One no 3/5 pin 6 A Socket
15.00 Each 31.00 Rupees Thirty One Only
60C One no Single pole 16 A Switch Rupees Fourty Seven
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
60D One no 6/16 A Universal Socket Rupees Fourty Seven
60E One no Single pole 16 A Switch & One no 6A/16A Universal Socket combined with Rupees One Hundred
indicator & fuse Twenty Four Only
60F Bakelite ceiling, rose
25.00 Each 18.00 Rupees Eighteen Only
60G Bakelite lamp holder Rupees Twenty Two
60H Electronic Hum free EME Socket Type Steps Fan Regulator Rupees Two Hundred
61 Providing & erecting bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter
complete with suitable G.I. Sleeve tubing of 2 mm. thick and required size and length suitable for
76.5 / 80 mm. required size of pole top or pipe in pipe surface for terrace as per instruction of EIC
or wall bracket as per instruction of EIC having nuts and bolts for fixing the brackets and having
spread of Upto 0.50 mtr. length with suitable rise as per site condition and suitable welded stiffner
reducer and nipple with check nut complete painted with one coat of yellow zinc and two coats of
alluminium paint for Single arm bracket suitable for pole or terrace as per design given by EIC (a)
For single arm bracket. (Jindal / Asian / Tata / Surya Prakash make Only) (Fabricators:- Bajaj,
Valmont, Transrail, Ambica Only) (Test certificate to be submitted)
62 Providing and Fixing SITC of Outdoor aesthetically designed LED Street Light Luminaire with
total consumption of Max. 45 W with single piece die cast aluminium housing, high power LED
shall be mounted on high quality metal core PCB with extremely precison designed heat sink
complete with IP66 protection Class with polycarbonate / thoughened glass cover the fixture
should be suitable for pole/bracket mounting. The fixture to comply both LM79 and LM
Rupees Three Thousand
guidelines with LED module min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided
1.00 Each 3512.00 Five Hundred Twelve
with high quality polycarbonate lenses for better light distribution. The watt capacity of each LED
must be ≥ 4 watt in streetlight fitting The Fixture Should be able to be Pole Mounted and also
bracket mounted, provided with high quality driver for protection against high and low Voltage cut
Off, opertional for high amibient and high humid envirnoments, THD of driver should be less than
Also the Fixture should meet the following technical criterias Oprating range Voltage 160 to 270 V,
system efficiency >= 110 lm/w, and total lumens not less then 4950, CCT > 5000K, CRI >
beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non integralThe
Separate Potted driver should have over current, over voltage protection, short circuit protection so
that the fixture recovers once the fault is removed. In addition to the above product should be
operational in the temperature range of 0 deg to 50 deg and humidity range of 10% to 90% RH.
(Note:- The manufacturer / authorized Channel partner of the manufacturer has to submit 5 yrs
free replcement Guarantee for complete Fixture)
63 Providing & erecting Flexible PVC insulated multistrand multicore 1.1 kv grade ISI marked copper
wires of following size to be erected as directed. 3 core x 1.5 sq.mm. PVC insulated round 30.00 Mtr. 46.00 Rupees Fourty Six Only
copper wire ISI mark.
Item Description of Item Total Unit Quated Rate in Total
No. Quantity Rate Rs. In Words Amount Rs.
64 Providing & fixing Solderless crimping type Copper lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear terminals with
30.00 Each 8.00 Rupees Eight Only
brass/cadmium plated nut bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm
65A Providing and Laying of Mains with ISI marked, 1.5 KV grade electrolyte multi stranded, annealed
copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in
Rupees Seventeen
existing pipe of following size (Specifically for control panel, relays, power switchgears, motor 300.00 Mtr. 17.00
starters & control wiring) with required size of copper lugs, nuts and bolts if required. One wire
65B One wire 2.5 sq. mm Rupees Twenty Seven
65C One wire 6.0 sq. mm
50.00 Mtr. 56.00 Rupees Fifty Six Only
65D One wire 16.00 sq. mm Rupees One Hundred
Fourty One Only
66 Supplying and fixing radium sticker or Painting the number and words for inventory
Identification on erected fittings / equipment’s or Such accessories (MCBDB, Panel, Pole, Rack,
Earthing, Pump, Door etc.) as may required with good quality of enamelled paint or fade proof,
weather proof, waterproof high quality vinyl radium sticker for indoor / outdoor application as 20.00 Each 2.00 Rupees Two Only
directed by engineer in charge. For one character 50 mm height.(The colour of sticker / paint
should be as per instruction given by EIC as per site requirement)
67 Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all types along
with accessories etc. complete and handed over to dept. 100.00 Point 1.00 Rupees One Only
68 Dismantling the existing switchgears, DB and Busbar of any size complete with / without board or
2.00 Each 7.00 Rupees Seven Only
angle iron frame.
TOTAL Amount Rs….(A+B) =
TOTAL Amount Rs….(A+B) =
I/c Executive Engineer
Signature of the contractor. G.S.Police.Housing Corp.Ltd.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. SBD 1.pdf
2. All Condition.pdf
3. Schedule-B.pdf
3A. PERCENTAGE ABOVE BELOW.pdf
4. Para Statement.pdf
5. Attached Specification.pdf
6. C.C STATEMENT.pdf
7. DTP Condition.pdf
Genral Techinal Specification 24032023.pdf
Electrical Booklet January 2024.pdf
NIT - 03 (2026-27).pdf
Download all tender documents and submit your bid