Electrification of EV Laboratory at New Central Library Building

Amount

Wiring for light / wall fan / ceiling fan points with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class ivory coloured PVC conduit with modular switch, modular plate, suitable G. I box earthing the point with 1.5 sq mm green coloured FRLS PVC insulatd copper conductor single core cable etc, as required. (Group C)

Supplying and fixing of 20 mm (medium class) ivory coloured rigid PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing 3 numbers 1.5 sq mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed PVC conduit as required.

Supplying and drawing 3 numbers 2.5 sq mm FRLS PVC insulated copper conductor single core cable (Red, Black & Green) in the existing surface/recessed PVC conduit as required.

Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 4 sq. mm + 2 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing 1 or 2 Module (75mmX75mm), GI box alongwith modular base & modular switches in recess etc.as required.

Supplying and fixing 3 pin 5/6 A socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing of 400 mm sweep 1300 rpm wall fan, with three speed positions and pulling cord, giving connection as required.

Supply and fixing of box type tube fittings (Batten & T8 LED Tube), complete with side holders and 18/20 watt 4 feet T8 LED tube etc, as required.(T8 LED-Bajaj BLRB 18W CW LED, Batten- Bajaj BLRB-DB 118 I, or compatible).

Supply Installation Testing and Commissioning of 28W 1200 mm sweep BLDC ceiling fan with input voltage range (140-285V), 380 rpm, Air delivery 235 m3/min, required length, painted down rod (GI) providing and fixing fan hooks including connections etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supply and fixing 5-32 amps rating, 230 V 'C' curve, miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supply and fixing 5-32 amps rating, 230 V 'C' curve, miniature circuit breaker suitable for inductive load of Triple pole in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supply and fixing 5-32 amps rating, 230 V 'C' curve, miniature circuit breaker suitable for inductive load of Triple pole and Neutral in the existing MCB DB complete with connections, testing and commissioning etc as required.

Supplying and fixing 63 A rating, 415 V, 'C' curve miniature circuit breaker suitable for inductive load of Triple pole and neutral in the existing metal enclosure, complete with connections, testing and commissioning etc. as required.

Supplying and fixing 63 A, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 4 pole metal enclosure on surface / recess, complete with earth bar, din bar, detached gland plate, interconnection, phosphetized and powder painted including earthing etc. as required.

Supplying and fixing of 3 phase 12 way (8 + 36), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required.

Supply of 1.1 kV grade 3.5C x 25 sq.mm, Aluminium conductor XLPE insulated PVC sheathed armoured power cable as required.

Laying and fixing of one number 1.1 kV grade Aluminium conductor XLPE insulated PVC sheathed armoured power cable of 3.5C x 25 sq.mm size, clamping on wall using suitable metal clamps spacing not exeed 50 cm etc. as required.

Laying and fixing of one number 1.1 kV grade Aluminium conductor XLPE insulated PVC sheathed armoured power cable of 3.5C x 25 sq.mm size, in the existing masonry open duct as required.

Supply and making end termination with brass compression gland and aluminium legs for 3.5 C x 25 sq.mm (28 mm) size of XLPE insulated PVC sheathed armoured aluminium cable as required.

Supply and laying of one number 8 SWG good quality bare copper conductor for loop earthing along with existing XLPE insulated PVC sheathed armoured power cable as required.

Supplying and installing 200 mm width x 50 mm depth x 1.6 mm thickness perforated painted with powder coating M.S. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S.suspenders including bolts & nuts, painted suspenders etc. as required.

Supplying and installing 375 mm width x 50 mm depth x 2 mm thickness perforated painted with powder coating M.S. cable trays with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S.suspenders including bolts & nuts, painted suspenders etc. as required.

Supplying and installing 200 mm width x 50 mm depth x 1.6 mm thickness perforated painted with powder coating M.S. cable tray bends with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painted suspenders etc. as required.

Supplying and installing 375 mm width x 50 mm depth x 2 mm thickness perforated painted with powder coating M.S. cable tray bends with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S.suspenders including bolts & nuts, painted suspenders etc. as required.

Supplying and fixing 100A, 16kA, 4 pole (Three pole and Neutral), 415 V, Moulded casing circuit breaker (MCCB) with rotary handle, thermal magnetic release and terminal spreaders (if required) in existing cubicle panel board including drilling holes in cubicle panel, making connections etc, as required.

JAITECH ENGINEERS