Padanayarkulangara Devaswom In Karunagappally Group- Pucca Maintenance To The Ornamental Padippura In West Side And Painting Works To The Temple Structures In 1201 Me Reg- RE-TENDER

Appendix I - Pucca maintenanace to the ornamental padipura in west side

Dismantling and removing manglore tiles over roofs including ridges,hips,valley sheet,wind ties and bordering but including roof timbers and stacking materials within a distance of 150 m

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area 40 square centimetres and above

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead:Of sectional area below 40 square centimeters

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying Anjily wood reapers of size 50x25 mm

Re- fixing departmental Anjily wood reapers of size 50x25 mm with wire nails including cost and conveyance of materials etc. complete.

Supplying Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

Re-fixing Departmental Anjily wood wrought and put up for roof members including cost and conveyance of materials etc. complete .

Painting with oil type wood preservative of approved brand and manufacture :New work (two or more coats)

Supply New MP tiles 410 mm X 235 mm or nearest available size

Supplying MP hip and ridge tiles of nearest available size instead of damaged one size 400 mm.

Roofing with departmental M P (Mangalore pattern) tiles and new tiles of size 410 X 235 mm or nearest available.

Roofing with 400 mm nearest available size departmental and new M P Hip and ridge tiles first class set in CM 1:4 including finishing the edges.

Labour engaged for carpentry works

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old workSynthetic enamel paint

Appendix II - PAINTING WORKS TO THE TEMPLE STRUCTURES IN 1201 ME

Cleaning the old painted surface having algae and other impurity using pressure washer including labour & hire charges of pump etc, complete

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)