Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹31.0 L+₹1.2 L (4.02%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹31.2 L+₹1.5 L (4.87%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L3 | Rejected-Finance Rejected | |
| 4 | L4₹32.2 L+₹2.4 L (8.03%)Rejected-Finance | L4 | Rejected-Finance Rejected |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
6 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu Road, Pune
GE Dehu Road, Pune
REPAIR TO JOINERY WORK AND CERTAIN BR REPAIRS FOR MD AND OTM ACCN OF ODTD UNDER AGE BR WEST AT GE DEHU ROAD
2023_MES_599128_1
8776
Open Tender
Civil Works
Item Rate
270 days
GE Dehu Road, Pune
Pl refer tender documents
7 documents required · 7 mandatory
₹500
GE Dehu Road, Pune
₹80,000
Yes
26 May 2024
29 May 2023
8 Jul 2023
29 May 2023
6 Jul 2023
12 Jun 2023
Amount
Taking down chowkhats or frame with shutter (without taking off shutter from the frames) of wood, steel, aluminium etc, exc. 1.5 Sqm but n. exc. 4 Sqm each.
–Ditto- as item No 1 above but n.exc. 1.50 sqm each
Taking down shutters of any description exc 1 sqm but n. exc. 2 Sqm each.
Cutting holes in stone walls built in cement mortar for inserting hold fast/lugs & making good disturbed portion in CM 1:3 or cement congrete 1:2:4, type B-1 as required (Depth of embedded portion of hold fasts measured from the face of the jamb into wall exc half brick but no exc one brick.)
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm
M/L for PCC 1:2:4 type B -0 (using 12.5mm graded aggregate ) in door frame filling
S&F factory made 2nd class hardwood 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed.
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauze / glass (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
S&F Flush shutter 30 mm thick, solid core construction with block board core & ply wood face panels commercial type on both sides
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer andas per directions of Engineer-in-charge.
Supply and fixing 30 mm thick Fiberglass ReinforcedPlastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick S&F FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
Supply and fixing Factory made single extruded WPC (Wood Ploymer composite) solid plain flush door shutter 30 mm size comprising of virgin polymer of K value 58-60 (Suspension grade) calcium carbonate and natural fibres (wood polymer/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge) minimum compressive strength 50N/mm square modulous of elasticity 850 N/mm square and resistance to spread of flame class A category with property of being termite / borer proof water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter shunk SS screws all as per direction of Engineer -in - Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately
Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thick PVC Sheet re-in-forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a priming coat of Pink primer.
S&F aluminium anodised sliding window fully glazed fitted with one side visible glass of 5.5 mm thick shutter frame size 44x24x1.8 mm including chowkaht of size 80x40x1.8 mm and sliding fly proof shutter (using stainless steel wire cloth of gauge 0.50 mm dia and aparture 1.18 mm ) with three track and providing necessary jointing cleats, glazing clips, ribber packing, anodised aluminium snap beading handle screw complete all as specified and as directed
S&F aluminium grill with suitable aluminium anodised frame F/H section manufactured by M/s DECO GRILL as per design No DG-104, 10mm thick. complete all as specified and as directed
S&F aluminium powder coated door shutter section weighing not less than 0.55 Kg/m incl necessary rubber beadings, mouldings, handles, locking arrangements, aluminium snap beading, jointing cleats, glazing clips complete as specified and directed by Engr-in-Charge.
S & F aluminum powder coated frame for doors with one or more rebate inlcuding jointing cleats for fixing etc complete
S & F 5.5mm thick tinted glass fixed into aluminum frame complete all as specified and as directed
S & F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S & F in repairs pre-laminated particle board 25mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl leaping patti complete.
S&F in repairs Butt Hinges stainless steel 100 mm long pin, bright polished and fixed, typeB-11 complete .
S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast orextruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.
S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.
S&F 150mm long Aluminium handles cast type anodised
S&F Door closer hydraulically regulated, aluminium extruded, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
Floor door stopper 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F in repairs stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainlesssteel wire staples .
S&F 3 mm thick sheet glass ordinary quality fixed in panes n.exc. 0.50 Sqm each pane and glazing with oil putty complete including Hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips
S& F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exc. 0.50 Sqm in each pane complete including hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips
Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.
S&F Aluminium anodised snap grid false ceiling, for insulation and acoustic purpose, using standard aluminium sections of size 35.60 mm x 23.60 mm x 1.60 mm as in wall angle, 23.60 mm x 23.60 mm x 1.60 mm as in Main/ Cross Tees and 26.00 mm x 26.00 mm x 1.60 mm angles for grid of size 605 x 605mm suspended with 4mm dia. GI wire at intervals n.exc. 600mm centre to centre and fixed to roof truss with suitable size MS hooks and fastening bolts etc. from sloping/flat roof including 12 mm thick Gypsum ceiling boards of size 600mm x 600mm fixed with clips to aluminium snap grid including preparation of exposed surfaces of ceiling boards and applying two coats of acrylic emulsion distemper over a coat of primer all as specified and as directed.
S&F 10 mm thick plaster of Paris (gypsum anhydrous) ceiling on flat surface up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) as specified and as directed.
-Ditto- as per above item but for sunk or raised moulding complete all as specifie all as specified
Anodised aluminium snap grid frame work for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specifie all as specified
S&F soild PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and as directed
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and as directed by Engineer-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 all as direced.
M&L for vitrified coloured tiles 8 to 10mm thick Light shade (square/rectangular) polished area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed.
Ditto as per item No 41 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed.
M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.
M&L for 18-20 mm thick Granite (of any type) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed.
M&L for 18-20 mm thick Granite (of any type) machine cut in skirting/dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
Demolition of brick or stone/boulder masnory, built in cement mortar.
M & L for brickworks with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6
M & L for 15 mm thick cement plaster on fair faces of brick work in cement mortor 1:4 including plastered surface shall be even and smooth without using extra cement finish completed
M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete all as specified and as directed..
Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.
S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure fancy type, chromium plated with longshank and cup (concealed type) screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.
S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.
S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.
S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia all as specified and as directed by Engineer-in-Charge
S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge
S&F 20 mm dia stainless steel medium grade curtian rod fixing in brackets including stainless steel brackets (02 Nos bracket) each in door/windows with side knob as specified and directed complete including fixing in any opening.
S&F in repairs sinks made of stainless steel 1mm thick kitchen or labor-atory with plugs, washers and wastes; including fixing cantilever brack-ets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with 40mm dia CP wast coupling complete.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.
M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed
M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment and 25 mm thick sand cushion complete all as specified and as directed.
M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and as directed
Complete removal of existing treatment from external surfaces of walls by mechanical means and preperation of old surface & applying two coats of premium acrylic smooth exterior paint of required shade @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @2.2kg/10sqm. Painting will be done by smart control machine complete all as specified and directed by Engineer-in-charge.
M/L for taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land and applying water proofing treatment as under :-(a) Rendering 10mm thick in CM 1:4 on concrete surfaces / slabs with admixture of integral water proofing compound as per manufacture instruction by weight of cement, levelling to receive water proofing treatment (WPC shall be measured & paid seperately) (b) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (c) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (d) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (e) Finally applying a coat of solar reflective (f) The make / treatment shall be from the one of the following manufacturer:-(i) 'Moply FP' of M/s Texsa (I) Pvt Ltd (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane.
Supply only Liquid water proofing compound .
DR J S CHADHA AND SONS
S.R.M.K Enterprises
Dinesh Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .