REPAIRS PAINTING POLISHING CANNING OF STEEL AND WOODEN FURNITURES AT CG DHQ 4, CGRA RAMESWARAM, CGAE NEDUMBASSERY AND ICGS BEYPORE

Amount

POLISHING OF WOODEN FURNITURE

Material and labour for preparation of old treated wooden surfaces by cleaning and removing dust, dirt etc and applying two coats of french polish for the following wooden furniture all as shown in drgs and as specified:-

Chair Dining with cushion (MAP) FD/MAP/E6/10

Sofa set 2 seater (FD-373)

Sofa set 3 seater. (FD - 373)

Sofa set 5 seater (One 3 seater + 2 Single seater). ( FD- 373)

Confrence table (FD-08)

Table dining 6 Person (FD-273)

Table dining 8 Person (FD/MAP-II/03)

Table Dining 4x3 (FD/MAP-II/03)

Hat stand with mirror (FD-233)

Table dressing ladies (FD-378)

Table dressing Gents (FD-379)

Teapoy (FD- 278)

Table centre (FD-274)

Hot case Large (FD-364)

Display Board 150x90 cm (TP)

Rifle Rack wooden of 10 Rifle (SF/12/GENWFK)

Table 900x600mm with out drawer (FD-284)

Table 900x600mm with drawer (FD-283)

Peg table (FD-384)

Chair writing wooden (FD-280)

Dressing mirror (MAP FD/E6/MAP/16)

Chair easy (FD-229)

Stool dressing Cushined(FD/E6/MAP/14)

Table writing wooden (FD-249)

PAINTING OF STEEL FURNITURE

Material and Labour for preparing existing treated surfaces and applying one coat of synthetic enamel paint light grey / OG for the following steel furniture all as shown in drgs and as specified :-

Almirah large 1/2Hx1/2SH steel with shelves (FD-1032)

Almirah Med steel with shelves.(FD-1031)

Locker bed side steel (FD-1029)

Book case steel (FD-1028)

Table 900x600mm steel with drawer (FD-1008)

Stool Steel (FD-119(M))

Table office clerk steel (FD-1004)

Table office officer (FD-1003)

Chair CBA steel (FD-75)

Side Rack with trays (FD-1023)

Material and Labour for preparation of old painted surfaces and applying one coat of synthetic enamel paint black for the following steel furniture by spray painting all as shown in drgs & as specified :-

Charpoy IP with hard top (MAP) (Black) (FD/MAP-II/01)

Bed Hard (FD/MAP/08/(R))

Table Bed side steel (FD/E6/MAP/15(R) )

Chair verandha (FD/E6/MAP-II/06)

Teapoy Verandah(FD/E6/MAP/17)

Rack Shoes steel (MAP)(FD/E6/MAP/15(R))

Rack side steel 1830mmx760mmx1905mm (TP)

CHARPOY IP W/ HARD TOP (FD/MAP/08/(R))

Supply and fix 12mm thick phenol bonded commercial plywood 6'x3' ISI marked as in bed hard (Drg No FD/MAP/08(R)), placed on top of 25x25x1.25mm thick MS square tube stiffner including taking out old unserviceable plywood complete all as specified and directed by Engineer-in Charge.

Supply and fix 25mmx65mmx16 gauge MS Tube frame , 2050mm long, side rail(one side) of charpoy with hard top, welded to side leg (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed by Engineer-in-Charge.

Supply and fix 25mmx65mmx16 gauge MS Tube frame , 900mm long, head rest and foot rest side rail of charpoy with hard top, welded to side leg (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed by Engineer-in-Charge.

Supply and fix 25mmx25mmx16 gauge MS Tube frame , 900mm long, stiffiner of charpoy with hard top, welded to side rail (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed by Engineer-in-Charge.

Supply and fix 38x38mmx16 gauge MS Tube frame , 400mm long,foot rest leg of charpoy with hard top, welded to long rail (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed by Engineer-in-Charge.

Supply and fix 38mmx38mmx16 gauge MS Tube frame , 800mm long,head rest leg of charpoy with hard top, welded to long rail (Drg No FD/MAP/II/01) including taking out old unserviceable MS tube complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC inner shoe suitable for 19mm dia MS pipe leg of chair verandah complete all as specified and directed by Engineer-in-Charge.

Supply and fix18mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination of size 630mmx185mm screwed to MS strip,are welded to 18m rectangular pipe as in as in head board and foot board of bed hard Drg FD/MAP/08(R), including taking out old unserviceable board complete all as specified and directed by Engineer-in-Charge.

SOFA SET FD-373 5 SEATER (FD-373)

Supply and fix 560mmx530mmx100 mm size foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth costing not less than Rs. 300/- per meter of approved colour / shade / texture suitable for sofa seater for as per drawing FD - 373 after removing existing damaged cushion complete all as specified and directed.

SOFA SET FD-258- 4 SEATER (FD-258)

Supply and fix 560mmx530mmx100 mm size foam cushion, seat/back, having 40 Density, covered all sides with tapestry cloth costing not less than Rs. 300/- per meter of approved colour / shade / texture suitable for sofa seater for as per drawing FD - 258 after removing existing damaged cushion complete all as specified and directed.

SIDE BOARD (FD-372)

Material and Labour for removal of existing damaged Top of Side Board and replacing the same with new Top using 18mm prelaminated particle board of size 1025mmx450mm with teak facing on tope side fpr fixed and all as shown on drg and as specified FD-241/372.

Material and Labour for removal of existing damaged left sides of Side Board and replacing the same with new side using 18mm prelaminated particle board of size 750mmx450 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-241/372

Material and Labour for removal of existing damaged right sides of Side Board and replacing the same with new side using 18mm prelaminated particle board of size 750mmx450 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-241/372

Material and Labour for removal of existing damaged back ply of Side Board and replacing the same with new 6 mm thick commercial ply of size 1025mmx750mm mm including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-241/372

Material and Labour for removal of existing damaged /broken stainless Steel Handle of Side Board and replacing the same with new and fixed all as shown on drg and as specified. FD-241/372

Material and Labour for removal of existing damaged /broken 18mm thick prelaminated Particle Board pull out Tray with telescopic channel of side board and replacing the same with new and fixed all as shown on drg and as specified. FD-FD-241/372

HOT CASE LARGE (FD-364)

Material and Labour for removal of existing damaged Top of Hot case Large and replacing the same with new Top using 18mm prelaminated particle board of size 1350mmx540mm with teak facing on tope side fpr fixed and all as shown on drg and as specified FD-364.

Material and Labour for removal of existing damaged left sides of Hot case Large and replacing the same with new side using 18mm prelaminated particle board of size 840mmx540mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified. FD364.

Material and Labour for removal of existing damaged right sides of Hot case large and replacing the same with new side using 18mm prelaminated particle board of size 840mmx540 mm with teak facing on one side and 4mm teak wood beading on the front edge including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-364.

Material and Labour for removal of existing damaged back ply of Side Board and replacing the same with new 6 mm thick commercial ply of size 1350mmx840mm mm including french polishing on wooden parts and fixed all as shown on drg and as specified. FD-364

Material and Labour for removal of existing damaged /broken stainless Steel Handle of Side Board and replacing the same with new and fixed all as shown on drg and as specified. FD-364

ALMIRAH LARGE / SMALL/ MEDIUM WITH SHELVES & 1/2 HX1/2 SHELVES (FD-1031/1032/ 1033/350/ 351) Material and Labour for cutting / removing the following corroded / unserviceable parts of Almirah small steel / Almirah lagre steel & replacing with new parts duly fixed complete all as specified, shown on drawing and as directed :-

Supply and fix Brass chromium plated handle, 100 mm long, as per Godrej Pattern.

Supply and fix One side leg of Almirah steel, left or right, 70 mm wide and 100 mm high, open ends bent outwards upto 15 mm, covering the ends of chennel with 70 x 100 mm MS sheet, 1.6 mm thick, welding the channel to bottom of almirah at 50 mm from the side of almirah including 2 coats of synthetic enamel paint olive green colour.

Supply and fix 3 way locking device as per Godrej pattern, fully operational with the existing handle.

Supply and fix Steel cup board lock, 50 mm size, 6 lever with stainless steel keys in duplicate as per Godrej pattern.

CHAIR REVOLVING/CHAIR COMPUTER (TP)

Removing existing un-servicable foam and provide new PU foam 50mm thick for seat shall be covered with superior tapastry cloth over a cover of cloth malmal . Cost of tapastry should not be less than Rs.350 per mtr Make of PU form SLEEP WELL (40 density).

Removing existing un-servicable foam and provide new PU foam 50mm thick for back shall be covered with superior tapastry cloth over a cover of cloth malmal . Cost of tapastry should not be less than Rs.350 per mtr Make of PU form SLEEP WELL (40 density).

Removing of existing unserviceable base and Supply and fix new base with suitable caster wheels size as per existing size.

Removing of existing unserviceable adjustable mechanism and Supply and fix new suitable adjustable mecanisam,size as per existing size.

Removing of existing broken unserviceable rubber handle and Supply and fix new suitable Rubber handle.

Removing of existing broken unserviceable caster wheels size as per and Supply and fix new suitable Rubber handle.

CHAIR DINING WITH CUSHION (FD/MAP-II/04)

Supply and fix 75mm thick, 40 density foam seat, covered with fabric of approved colour suitable for chair dinning officers fixed to 12mm thick commercial plywood including taking out old unserviceable cushion seat complete, Cost of tapastry should not be less than Rs.350 per mtr Make of PU form SLEEP WELL (40 density)all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs PVC/Rubber shoe good quality as per sample as directed by Engineer-in charge.

CHAIR WRITING MAP (FD/MAP/E6/12)

Supply and fix 50mm thick, 40 density foam seat size 500mmx450mmx50mm, covered with fabric of approved colour suitable for chair writing' (Drg No FD/E6/MAP/12), fixed to 12mm thick commercial plywood including taking out old unserviceable cushion seat complete, Cost of tapastry should not be less than Rs.350 per mtr Make of PU form SLEEP WELL (40 density)all as specified and directed by Engineer-in-Charge.

Supply and fix 50mm thick, 40 density foam back size 500mmx350mmx50mm, covered with fabric of approved colour suitable for chair writing' (Drg No FD/E6/MAP/12), fixed to 12mm thick commercial plywood including taking out old unserviceable cushion seat complete, Cost of tapastry should not be less than Rs.350 per mtr Make of PU form SLEEP WELL (40 density)all as specified and directed by Engineer-in-Charge.

Supply and fix Arms rest/ Handle made of black integral skin polyurethane as specified and directed by Engineer-in-Charge.

TABLE OFFICE CLERK STEEL (FD - 84(M)/1004) Repairs to Table office clerk steel for the following:-

Supply and fix table top with 18 mm thick pre laminated particle board (exterior grade) of size 1200mm x 600 mm with teak veneer facing on one side and balancing white on the other side, including 4 mm thick teak wood edging alround the table top and fixing the table top with top frame of table with screws from bottom including taking down of old table top complete.

Supply and fix lock for table drawer, MS lock, 4 lever, locking bolt and lever shall be brass with stainless steel duplicate keys, duly fixed to the top drawer and providing automatic locking system to other three drawers including taking down of old locks complete.

Supply and fix 1 mm thick MS channel runner of 400 mm long folded to make shape duly welded one side to table frame to run the drawers smoothly including taking down old broken channel and make functional all drawers complete.

CANNING OF CHAIR DINGING,CHAIR WRITING,CHAIR EASSY (FD-158,FD-280/250,FD-229)

Material and Labour for Canning chair dinning(FD-158), chair writing(FD-280/250), chair easy(FD-229) with new plastic cane of size 1.8x0.46mm and boarder with 3.0x0.60mm size cane as per Godrej Pattern including taking out old/damaged plastic cane from the aforesaid furnitures and cleaning the entire surface of furniture complete all as specified and directed by Engineer-in-Charge.

Schedule of Credit (Minus) Rs. 13,057.00 NOTE: Bidder shall insert credit amount of Rs. 13,057.00 as rate in Green field under Col-13.

SARGAM ENTERPRISES

Albert Rebello and Company

Mahesh Traders