Lyndhrust Bungalow-Providing Bamboo curtains in the balconies.

Amount

Appendix A

OD98342/2022-2023:Providing and fixing Bamboo chik tatties making with the existing one, bamboo reapers of not less than 4-5 mm diameter &full width of the tatties, backing with green dungry cloth, pulleys, ring, rope, hooks, painting, two coat with synthetic enamel paint of approved brand and manufacture of required colour to even shade two of more coat. fixing that in proper lines and levels, includingall materials, labour conveyance charges etc. complete.

OD98344/2022-2023:Providing and fixing SS Hooks

14.72:Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD202377/2022-2023:Providing and fixing precoated galvanised iron traford tiled sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

13.53.1:Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade:New work (two or more coats) including coat of approved steel primer but excluding a coat of mordant solution.

OD202380/2022-2023:Providing and fixing 0.7 mm thick Aluminium plain sheet(size, shape etc... as approved by Engineer in charge) on wooden rafters wire nails and washers to pre - cover the etc ..... complete up to any pitch in horizontal/ vertical or curved surfaces and including cutting to size and shape whatever required as per the direction of the Engineer in charge

OD202381/2022-2023:Engaged for assist the fitter carpenter and cleaning the surrounding building

RAJESH SOMAN

Bidder Name

RENJITH R

RAJESH SOMAN