Retender 266/20-21 Kalliasseri GP Bikkiriyan paramb MCF yard Renovation

Amount

Renovation of Yard

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

10.19 : Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

10.16.1 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

od944210/2020_2021 : Providing Alu Zinc sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts 8mm diameter with bitumen and G.I .limplet washers or with G.I. limplet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping ofsheets complete up to any pitch in horizontal / vertical or curved surface) excluding the cost of purlins ,rafters and trusses and including cutting to size and shape wherever required .0.40mm thick Alu Zinc sheet

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od944212/2020_2021 : Providing and fixing 150mm split pipe over flat iron brackets 20x5 mm size.

50.18.9.17.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

od1069505/2020_2021 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade madeby block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm broken stone filling the joints in required colour and pattern over and including 50 mm thick compacted bed of 6 mm broken stone, filling the joints with fine sand etc. complete as per the direction of Engineer-in-charge.

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

od944270/2020_2021 : Modified 50.6.7.1 Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for<br>foundation and basement including all cost of materials, labour charges etc.

od1069504/2020_2021 : Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm<br>cm or nearest size in cement mortar 1:6 for foundation and basement using deptl. stones, including all cost of materials, labour charges etc. (Edited 2019-2020)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Bidder Name

SUDHAKARAN. P.K.