Renovation of Quality Control Building (4 Floors)

Half brick masonry with common burnt clay F.P.S. (non modular) FALGY bricks of class designation 7.5 in superstructure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work including all materials & men etc., complete

Providing 12 mm thick plaster with CM (1:4) to walls at all heights and ceilings, beams, Stair-case, lintel soffits, chajjas, projections, narrow bands and widths etc., including cost of all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer.

Providing and laying reinforced cement concrete work in nominal mix of 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering, finishing and reinforcement and including all materials & men etc., complete

Supply and providing HSD bar reinforcement of Fe-500 grade of approved make SAIL / RINL / TISCO including transportation, straightning, cutting, bending and binding with annealed binding wire of 18 gauge (1.22mm dia) complete all labour and material etc., complete all as directed

Providing plain cement concrete 1:2:4 nominal mix using 20 mm graded crushed granite aggregate including mixing, depositing in position, tampering, finishing, curing including all materials & labbour etc., complete all as directed.

Providing 40mm thick PCC (1:2:4) mix (20mm aggregate) flooring on top of slab and providing proper slop & finished with a floatig coat of neat cement finish including cement slurry and cost of cement complete all as directed.

Providing Water proofing treatment for toilet flooring including with brick bats with CM(1:4) and applying Brush bond two coats to walls complte all as directed (Brush bond Chemical will be measured seperately)

Provide and lay water proofing treatment consisting of: (i) through cleaning of existing RCC roof slab (ii) Repairing of all surface cracks wider than 3mm with polymer modified mortar prepared with Sikatop 77 acrylic polymer. (ii) Providing and laying cement plaster in CM 1:6 (where ever required to cover the undulations of slab surface) duly admixed with Sika Plastocrete Super @ 0.2% by weight of cement, over a bond coat of Sika Latex Cement Slurry to make the surface smooth and even (iii) Application of priming coat of compatible bituminous primer Sika WP Shield Primer W @ 0.300 kg per sqm over the cleaned and prepared roof surface complete as per satisfaction of the Engineer-in-Charge. (iv) Providing and laying STP(Shalimar) or Sika Atactic Polypropylene Polymer (APP) modified five layer prefabricated waterproofing membrane with thermal fusible properties on both side and having minimum thickness of 3.0mm and unit weight not less than 4.0 kg/sqm reinforced with non woven spun bonded polyester reinforcement @ 160 gm / sqm, <-50C cold flexibility. The layer of the membrane shall be laid using butane torch and sealing all joints properly, leaving no bare edge or end of APP membrane and finishing the surface with trowel or otherwise to obtain a uniform surface. The minimum side lap and end lap shall be kept at 75mm and 100 mm respectively. The membrane shall be laid over a coat of bituminous primer @ 0.300 kg./ltr per sqm made by the same membrane manufacture after necessary surface preparatory works such as cleaning the surface thoroughly, shaping mouths of outlets including cutting grooves (50mm x 50mm) in parapet and inserting edge of membrane and mending good damages by sand cement mortar (1:4) and shall be finished in all respect as per direction of Engineer-in-Charge. (v) Applying two coats of aluminium painting .

Supply and Providing Nito Bond SBR of Fosroc make as per manufacturer instructions and suggested mix proportions at required places as directed by Engineer-in-charge

Supply and Providing Nito Bond EP of Fosroc make as per manufacturer instructions and suggested mix proportions at required places as directed by Engineer-in-charge

Supply and Providing Nito Zinc primer as per manufacturer instructions and suggested mix proportions at required places as directed by Engineer-in-charge

Supply and Providing Brush bond of Fosroc make as per manufacturer instructions and suggested mix proportions at required places as directed by Engineer-in-charge

Supply and Providing Nitto bond AR chemical of fosroc make to the existing concrete surface for bonding after cleaning and brushing of surface complete all as directed by engineer.

Cutting, repairing and strengthening of handrail vertical supports by welding of additional steel sections like MS square rod, flat bars etc., (10 to 15cm length approx) including labour and consumables etc all complete as directed by Engineer-in-charge. (Steel will be issued free by HSL, but loading and unloading is in contractor scope)

Repairing of existing Thermocol board false ceiling, replacing of damaged thermocol boards including all consumables, labours and hiring charges of machinery complete all as directed by Engineer Incharge

Removal of existing doors and windows along with frame of area 3 sq. metres and below and dispose the serviceable material in to disposal section and unserviceable material out side the HSL premises etc., complete

Replacing of damaged glasses with new one (4mm thick plain glass) in wooden window shutters including beading materials, labours etc. as directed by Engineer-in-charge

Dismantling of existing damaged RCC members like Overhead tank walls , sunshades, chajjas, etc where ever required including cutting of reinforcement bars by manually / mechanically including stacking of serviceable material and hand over to disposal section and dispose the serviceable materials within a lead of 50 mts etc., complete

Demolishing of brick work in Cement mortar by manually / mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Chipping and removal of old damaged plaster and cleaning the surface including disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Removal and disposal of all sanitary fittings, concelled / exposed PVC,CI,GI waste pipes, water supply pipes, rain water pipes of all diameter, PVC doors as directed by Engineer-in-charge.

Cutting of trunks and branches of trees upto 600 mm girth and disposal of unserviceable material out side the HSL premises.

Apply two coats of premium quality arcylic Interior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (Royal shine), Berger (silky luxury) where ever specified by Engineer including necessary scaffolding etc., complete. (Rate includes scrapping of old surface by mechanically)

Apply two coats of premium quality weather proofing arcylic Exterior emulsion paint over a one coat of primer, reqired shade to wall surfaces from approved brands Asian paints (apex ultima), Berger (All guard) where ever specified by Engineer after through scrapping & cleaning of old surface including necessary scaffolding etc., complete. (Rate includes scrapping of old surface by mechanically)

Providing two(2) coats of synthetic enamel paint for doors and windows etc., (after removing the rust by using wire brush or sand paper if required) of approved brand (Asian / Berger / Nerolac) and manufacture of required colour to give an even shade on old work including applying putty and prime coat complete all as directed

Providing Two(2) coats of white washing with suryacem / Hitech gold to ceiling surfaces after through scrapping, sand papering and cleaning the surface to give even shade etc., complete all as directed.

Applying two or more coats of french sprit polish of approved brands including a coat of wood filler on old wooden surface after thourough cleaning and preparation of surface as directed by Engineer-in-charge.

Providing and fixing premium quality Vitrified tiles (Double Charged) of size 600X600X10mm in floors with water absorption less than 0.08% and conforming to IS : 15622, of approved make SOMANI / KAJARIA, in all colours and shades, laid on 20mm thick cement pigment of MYK Laticrete /Saint gobian or its equivalent material to maintain the level including grouting the joints with white cement and matching pigments etc., and all materials complete all as directed.

Providing and fixing 1st quality anti-skid floor tiles in toilets & wash rooms of 10mm thick conforming to IS : 15622, of approved make SOMANI / KAJARIA in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigments etc., Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chipping of existing floor tiles)

Providing and laying matt finished vitrified tiles for Staircase steps etc., of size 300x300x10 mm of approved make SOMANI / KAJARIA having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in outdoor floors such as steps etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments including all materials and cost of cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) etc. complete as per direction of Engineer-in-Charge. (Rate includes chipping of existing tiles / mossaic flooring)

Providing and fixing 1st quality , up to 10 mm thick (edge cut) Ceramic Glazed tiles in dados conforming to IS : 15622, of approved make SOMANI / KAJARIA, in all colours and shades, laid on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade. Quoted rate shall be including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna, Birla Gold & Jaypee) & all materials complete all as directed. (Rate includes chpping of existing wall tiles)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for black Granite kitchen platforms of size 2.50x0.60 / as per requirement, approved shade, colour and texture including Providing edge moulding and machine polishing to edge to give high gloss finish etc. laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Cleaning and polishing of terrazzo flooring using polish machine with wax polish of approved brand and manufacture etc., complete

Providing and fixing anodized extruded aluminium windows & ventilators (single or double shutter), doors and partitions (single or double shutter) part pannelled and part glazed with pre-laminated flat pressed 12mm thick particle board (NOVAPAN, ECOBOARD etc) of approved colour & make. Aluminium sections shall be powder coated with approved colour including aluminium powder coated frame conforming to IS:1948, IS:1949 fabricated from extruded sections of INDAL / JINDAL or approved equivalent make having minimum 2mm wall thickness for windows & ventilators and 3mm wall thickness for doors & partitions as per IS:1285, IS:733 and electro color coating of 15 microns thickness. Glazing shall be clear float glass of 5.5mm thickness of approved make SaintGobin / Modifloat including sanp fit type beading, concealed screws, fixtures (like tower bolts, hold fast, handles both sides, door stoppers with rubber shoes, 'L'drops, stays, floor springs, hydralic door closers etc) lokcing arrangement for windows, Godrej make mortice lock with 3 no keys for each door, C.P.brass / staineless steel screws, providing and fixing hinges / pivots, and making provisions for fixing of fittings where ever required including cost of PVC / neoprene gasket fits all complete with necessary fillingup of gaps at the junctions, at top, bottom and sides etc., complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required.

Supply and Fix the fabric vertical venetian blinds of approved make Jacobs / Vista including connected extruded aluminium head rails and all accesories etc., complete

Provide and fix Stainless steel butt hinges of 100x70x4 mm with necessary SS screws and other necessary fittings.

Provide and fix Stainless steel tower bolts (barrel type) of size 150x10 mm with necessary fittings for doors.

Provide and fix brass aldrops for doors of 300 mm long 16 mm dia with necessary fittings.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer of make Godrej or its equivalent (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Providing and fixing aluminium hanging floor twin rubber door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete

Providing and fixing aluminium anodised peg stays for windows (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete

Removal of existing door shutters of all size before floor tile works and refixing the same after floor tile works completed including attending with minimum repair works like re-sizes etc., all complete as directd by Engineer-in-charge

Supply and fix 32mm thick, skelton joinery for Windows shutters (including removal of old damaged shutters etc., and handed over to useful material to CE dept.,) using kaba wood complte all as directed.

Supply and fixing of 25 mm thick 750 x 2000 mm size, PVC doors with frame & shutter for toilets (Sintex or equvilant make) including aluminium aldrop, towerbolt, handles and butt hinges etc., complete

Providing and fixing white vitreous china flat back lipped front urinal basin of 430x260x350 mm with G.I clamps, 32mm dia PVC waste pipe, 15mm dia PVC polythene connector including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete (parryware/ hindiware)

Providing and fixing white vitreous china urinal partition of required size with G.I clamps including fittings and brackets, cutting and making good the walls and floors wherever required etc., complete (parryware/ hindiware)

Supplying, fitting and glazed vitreous china wash basin 550X400mm Size of Parryware / Hindware / Jaquar make with central tap hole including supplying and fixing of C.I brackets painted with one coat of approved red oxide Zinc Chromate primer and two coats of approved synthetic enamel paints, 15mm dia Chromium plated approved deluxe head pillar tap, 32mm dia Chromium plated heavy duty approved waste fittings, chain rubber plug etc, all as per drawings, specifications and directions of the Engineer, including all materials, tools, plant and labour etc., complete

Supply, fit and fix white glazed earthenware European type water closest of Parryware / Hindware / Jaquar make with 'P' or 'S' trap with or without vent hole, colour or black solid plastic seat and cover with low level cistern of 10 litres capacity of same make as specified including all fittings, materials, tools and labour etc., complete.

Providing and fixing 6 mm thick frame less beveled edge mirror of superior glass of approved quality of saint gobin / modi gaurd complete using stain less steel studs including all accessories etc., complete

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of size 610X510 mm bowl depth 200mm as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required etc., complete (Nirali / Anjali / Parryware make)

Providing PVC health faucet including 1.5m flexible pipe of make Watertec or its equivalent including all accessories etc., complete

Supply & provide 100 mm dia floor trap along with Stainless steel grating of approved quality etc., complete

Supply and fix 100mm dia PVC Shower rose of make Watertec or its equivalent complte all as directed.

Providing and fixing PTMT soap Dish Holder of approved make Watertec or its equivalent having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms etc., complete

Providing and fixing CP Towel rail of standard length of approved make Waterteck or its equivalent including all accessories etc., complete

Providing 2 peg, brass CP coat hooks of standard quality etc., complete

Supply & Fixing Brass PVC bib cocks (long body) of make Waterteck or tis equivalent etc., Complete all as directed.

Supply & Fixing 15 mm dia bore Brass C.P angle cocks of standrad quality with 15mm dia bore and Complete all as directed. (Watertec or its equivalent)

Supply & Fixing 15 mm dia bore CP brass stop cocks of standrad quality with 15mm dia bore of approved make confirming to IS:8931 and Complete all as directed. (Watertec or its equivalent)

Supply of 110 mm dia UPVC(SWR) rain water downtake pipes conforming to IS : 13592 Type A, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) and removing of old pipe line and handover to disposal section etc., complete

Supply of 110 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Supply of 75 mm dia UPVC (SWR) Soil and waste pipes conforming to IS : 13592 Type B, jointing with seal ring conforming to IS : 5382, including fixing of clamps, bends, shoes (supreme/ prince make) complete

Providing and fixing 15 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases in Brick wall/ 0.5m thick RR walls and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing 20 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases in Brick wall/ 0.5m thick RR walls and making good the same including testing of joints complete as per direction of Engineer in Charge

Providing and fixing 25 mm nominal dia Pipes CPVC pipes for plumbing lines of approved make Supreme / Prince / Astrial including fittings and the cost of cutting chases in Brick wall/ 0.5m thick RR walls and making good the same including testing of joints complete as per direction of Engineer in Charge.

Supply, fitting and fixing 15 mm nominal dia in position galvanised steel (Heavy duty) distribution pipes (of make Tata / Jindal / Zenith) of the following sizes conforming to IS: 1239 at all heights and depths above and below plinth level including necessary galvanised steel fittings such as bends, elbows, tees, plugs, sockets, short pieces, clamps etc., and testing of the pipe lines hydraulically, all as per drawings, specifications and directions of the engineer, complete all materials, tools, and labour all as directed

Supply, fitting and fixing 25 mm nominal dia in position galvanised steel (Heavy duty) distribution pipes (of make Jindal / Zenith) of the following sizes conforming to IS: 1239 at all heights and depths above and below plinth level including necessary galvanised steel fittings such as bends, elbows, tees, plugs, sockets, short pieces, clamps etc., and testing of the pipe lines hydraulically, all as per drawings, specifications and directions of the engineer, complete all materials, tools, and labour all as directed

Supply, fitting and fixing tested heavy duty 15 mm nominal dia (10 kg/sq cm) gun metal fullway gate valve of approved make Global / Zenith all as per drawings, specifications and directions of the engineer, all materials, tools, and labour complete in all respect.

Supply, fitting and fixing tested heavy duty 25 mm nominal dia (10 kg/sq cm) gun metal fullway gate valve of approved make Global / Zenith all as per drawings, specifications and directions of the engineer, all materials, tools, and labour complete in all respect.

Constructing brick masonry Chamber 60x60x75 cm inside, with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement including all materials & men etc. complete as per standard design

Cleaning of Septic tank and manhole chambers & drain etc., and disposal of debris outside HSL premises as directed by Engineer-in-charge

Disposal of debries, surplus excavated earth, wooden scrap, garbage and rubbish outside the HSL premises to private dumping yard up to 20Km lead (not to dump in HSL colony dumping area & surrounding areas) it is the responsibility of the firm to ensure no objection shall be raised by Muncipal authorities / from any bod. If any dispute arises the agency has to sort out at their own risk etc., complete all as directed.

Providing sal wood work in frames of doors, windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc., complete

Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, solid core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters (including polishing) ISI marked Stainless Steel butt hinges with necessary screws and connected anodised aluminium hardware materials like aldrop & tower bolts, door stoopers etc., Complete

Supply and providing MS hold fasts of size 30x5mm & 250mm long including cutting of pocket of size 150x150mm and providing 1:2:4 concrete complete all as directed.

Chipping and removal of existing old damaged Daddo / Mossaic tiles and providing 12mm thick plastering of CM (1:4) complete all as directed.

Pressure grouting in to the mansonry wall /base slab of existing building by drilling the holes and grouting the mixture of Fosroc chemicals like cebex100, nitto bond SBR or nito bond AR and conplast 4211c with suitable porportions as per manufacture specfications and then seal the pocket by using Renderoc plug material complete all as directed by the engineer.

Providing and fixing 1st quality Netlon or its equivalent Mosquito fly proof mesh to windows and Ventilators including necessary wooden beading and also 2 coats of enamel paint/ sticker type etc., Complete all as directed.

Cleaning of existing glazed tiles using detergents/ Acid and cleaning agents etc., all complete including all consumables and labour as directed by Engineer Incharge

Dismantling of existing old panel, supply, Installation, testing and Commissioning of new 08 way, free standing, floor mounting, cubical type, front execution type, dust& vermin proof LT power Panel Board with 800A capacity Al. bus and 630 Amps MCCB (4 pole 50KA) as incomer, 2 Nos.160 Amps MCCBs and 6 Nos. 100Amps MCCBs as outgoing feeders and suitable for 415V +/- 6%, 3 ph with neutral link, 50 Hz system. The panel shall have IP 55 protection, double door and shall be provided with indicating lamps, Digital Voltmeter, Ammeter and Energy Meter (with calibration certificates valid for one year). Connectorization of incoming cable from Solar panels to the incoming Busbar of this panel shall be done. Panel drawing shall be approved by Engineer in-charge prior manufacturing. Approved make: Schneider/ Siemens/ ABB/ Havells / Legrand / IndoAsian or Equivalent.

Supply, fix, test and commissioning of 3 phase, VTPN 8 way double door MCBDB with 63 Amps, 4 pole MCB/Isolator as main incomer and 10 A to 32 A, 10KA SP/DP MCBs as outgoings including all accessories as required and as directed. Approved make Schneider/ Siemens/ ABB / Havells or Equivalent.

Supply, fix, test and commissioning of 3 phase, VTPN 4 way double door MCBDB with 63 Amps, 4 pole MCB as main incomer and 10 A to 32 A, 10KA SP/DP MCBs as outgoings including all accessories as required and as directed. Approved make Schneider/ Siemens/ ABB / Havells or Equivalent.

Concealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for One point controlled by one switch as directed (It includes finishing with CM 1:5 and surface to match with the existing surface).

Concealed PVC conduit wiring with 3 runs of 1.5 sq.mm FRLSH PVC flexible copper cable for Two point controlled by one switch as directed (It includes finishing with CM 1:5 and surface to match with the existing surface).

Concealed PVC conduit wiring with 3 runs of 2.5 sq.mm FRLSH PVC flexible copper cable for switch sockets as directed (It includes finishing with CM 1:5 and surface to match with the existing surface).

Concealed PVC conduit wiring with 3 runs of 4 sq.mm FRLSH PVC flexible copper cable for AC units, Oven and Refrigerators as directed (It includes finishing with CM 1:5 and surface to match with the existing surface).

Supply, fix, test & commissioning of 3 modular type switch board with 01no. 16A (3+2 pin) modular socket and switch.

Supply, fix, test & commissioning of 3 modular type switch board with 01no. 6A (3+2 pin) modular socket and switch.

Supply, fix, test & commissioning of 8 modular type switch board with 01no. 16A (3+2 pin) modular socket with switch & 02nos. 5A 3-pin modular socket with switch as directed by engineer in-charge.

Supply, fix, test & commissioning of 8 modular type switch board with 03nos. 3pin 5A modular socket with 2nos. switches as directed by engineer in-charge..

Supply, fix, test & commissioning of 8 modular type switch board with 5A 3-pin modular sockets & switches, fan regulator as directed by engineer in-charge.

Supply, fix, test & commissioning of 4 modular type switch board with 04 nos. 5A modular switches & fan regulator as directed by engineer in-charge.

Supply, fix, test & commissioning of 3 modular type switch board with 03 nos. 5A modular switches as directed by engineer in-charge.

Supply, fix, test & commissioning of 2 modular type switch board with 02 nos. 5A modular switches as directed by engineer in-charge.

Supply, fix, test & commissioning of 1 modular type switch board with 01 nos. 5A modular switch as directed by engineer in-charge.

Supply, fix, test & Commissioning of 20A DP MCB DB with Metalic Enlcosure for AC units as directed by engineer in-charge.

Supply, fix, test & commissioning of 20W LED Tube light as directed by engineer-incharge.

Supply, fix, test & commissioning of 7W LED bulb with holder as directed by engineer-incharge.

Supply, fix, test & commissioning of 1phase, 240V, 1200 mm 5 star rated Ceiling Fan as directed by engineer in-charge.

Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep wall mounted fan as directed by engineer in-charge.

Supply, fix, test & commissioning of 1phase, 240V, 400 mm sweep exhaust fan with louvers as directed by engineer in-charge.

Supply, install, test and commissioning of 5 Star rated, inverter type, 1.5T Split AC unit (Cu. Condenser) with Stabilizer, Power cable, 3Mtr. Cu Pipe, Stand for Outdoor unit, remote etc. Recommended makes: Bluestar, Voltas, Carrier, OG

Supply, install, test and commissioning of 5 Star rated, inverter type, 2.0T Split AC unit (Cu. Condenser) with Stabilizer, Power cable, 3Mtr. Cu Pipe, Stand for Outdoor unit, remote etc. Recommended makes: Bluestar, Voltas, Carrier, OG

Providing of earth pit with GI pipe conforming fully to IS:3043 and other IS standards as applicable complete with brick masonry chamber, plastering GI frame cover, watering funnel, GI pipe clamps earthing etc. all as required and as specified.

Supply and providing conference room projection system (i.e. LCD, 3600lm, 15000:1 Contrast ratio, 1024x768 resolution etc.) including 2 feet hanging stand and required cables with conduit piping (i.e. 7Mtrs Power cable, 10Mtrs VGA cable and 10Mtrs. HDMI cable) and including all civil works like making groove, plastering & matching paint. Cables runs on floor shall be taped propoerly. Projector Make: EPSON EB X49 or equivalent approved by Engineer in-charge.

Removal of all existing wiring material, Switch Boards, fittings, cables, electrical panels, equipment etc. and handover to Plant Maintenance Dept.

Removal and Refixing of existing Window AC units including necessary window openinings as directed

UTP CAT 6 Cable

PVC 1" Conduit Pipe

Switch 24 G/ 4 SFP unloaded (As per the given specification)

SM Transcerivers suitable for supplied switches

CAT 6 UTP Patch Chords(1 meter)

I/O Box Full Set

Unloaded Jack Panel (24-Port)

CAT 6 Information outlets (Key Stones for unloaded Jack panel)

Laying UTP/STP cable and PVC Conduit Pipe

Fixing Patch panel

Fixing I/O box set

Fixing of Switch

maple tree projects