HT LINE STRENGTHENING AT KAPPAD ROAD KAPPAD FEEDER PART 2 Work under Electrical Section Chovva

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Additional rate for providing one disc set on any type of HT pole for making cut point.

Fitting one additional HT pin with insulator

Fitting one additional F top bracket

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc.

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Reshackling one span LT 3ph 4 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Reshackling one span LT OH Addl conductor, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Stringing of 11KV, 99sqmm, XLPE covered conductor including fitting of all accessories, providing end terminations, midspan joints, pipe earthing, installing insulated piercing connectors etc.

Providing Cable Tie

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.