WD/BCKV/04/2026/NIT-08(e)-Sl. No. 06

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite /perspex cover and making necessary connections as required

Supply & Fixing 240 V 20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite /perspex cover and making necessary connections as required

Supplying of approved make exhaust fan heavy duty with mounting frame, blades AC 230-250. 225 mm sweep RPM 900 / 1400 (9”)

Supply installation testing and commissioning of following capacity geyser 5 star rated storage water heater with advanced 3 level safety For 15L-capacity

Gas charging (R410A/Eco Friendly Green Gas) of window/ split air conditioning unit including flushing of cooling & condensing units with nitrogen gas & rectification of leakage, replacement of filter, flair nut etc. if any. 1.5 TR

Through repairing of blower motor, oiling greasing, re-copper winding of armature of outdoor unit and re-fitting the same.

Providing & Fixing of ISI marked (IS : 15778 - 2007) Rigid CPVC drain water piping 6 kg/ cm2 with fitting like elbow, socket, Tee etc& support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation complete in all respect. 20 mm dia

Providing & Fixing of ISI marked (IS : 15778 - 2007) Rigid CPVC drain water piping 6 kg/ cm2 with fitting like elbow, socket, Tee etc& support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation complete in all respect. 25 mm dia

Supply, installation, testing and commissioning of suction/ discharge copper pipe line in split air conditioning unit 1.5 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class 'O', etc complete as required. Copper tube 1/4”

Supply, installation, testing and commissioning of suction/ discharge copper pipe line in split air conditioning unit 1.5 TR capacity including brazing, nitrile rubber insulation 6/9mm thick class 'O', etc complete as required. Copper tube 5/8”

Supply & fitting of Magnet Contact Relay of Out Door Unit. (Specification-30 A, FL 40 A, RES, coil voltage 208/240 V AC, Make-JKB-Gold)

Supply & fitting of starting relay for Window type AC (Make-HI-Tech Cat No. 85001)

Repairing of sensor board of 1.5 ton split type AC machines.

Supply and fitting of flapper motor for IDU of 1.5 ton split type AC machine (Make-Hitachi)

Supply and fitting of Pencil type copper filter (3/4" strainer used for straining the refrigerant)

Supply and fitting of insulated Wrapping tape twice to avoid pricking of crow & rat.

Charges for repairing of cooling for split type 1.5 ton AC machine mending leakage.

Supply and fitting of 15 ltr. with thermostal pocket, 2 Kw / 2000 Watt. (Make - Bajaj, Model - Shakti)

Supplying and fixing of 50/60 mfd. Running capacitor (Make - Blue Star)

Supplying and fixing of 3/4 mfd. IDU fan capacitor (Make - ABS)

Thorough, checking, servicing and cleaning of spare parts part by part of 1.5 ton split or window type AC machine along with cleaning of condenser and cooling coils by caustic solution and refitting the same.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply of new compressor for split type 1.5 ton capacity AC machine (Make - Hitaci / Daikin)

Supply of 40 Watts LED bulb, Make - Philips, Colour - Crystal White, Style Name - 40 W / B22

Supply of lamp holder for ceiling / wall mounting straight holder, Brand = Philips / Anchore, Colour - White, Primary materials - Plastic

Supplying and fixing of 0.7 capilary size heat exchanger of outdoor unit

through purging of refrigeration unit for nitrogen gas pressure for removal of moisture, slag & dust for proper cooling performance including supply of N2 gas.

fitting of new compressor by fixing of nut, bolts and gas welding with brazing sticks and other accessories to complete the re-assembling of the AC machine

taking out the old unserviceable and burnout compressor from the unit after cutting the nut, bolts and copper pipe line by gas welding.