Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-Finance GOVT ELECTRICAL CONTRACTOR C VILLAGE HAT PO BAJAURA TEHSIL BHUNTAR DISTRICT KULLU HP 175125 | KULLU | HIMACHAL PRADESH | 175125 | ₹17.1 L | L1 | Accepted-Finance Due to lowest bidder |
| 2 | L2₹19.0 LRejected-Finance CHANDRONA TEHSIL NOHRADHAR DISTRICT SIRMOUR H P | ₹19.0 L | L2 | Rejected-Finance Due to higher bidder |
| Sl No | Description | Qty | Unit | Vinod Kumar L1 | Ashok Kumar L2 |
|---|---|---|---|---|---|
| 1.00 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 4 | Each | 12,500 ₹50,000 | 13,500 ₹54,000 |
| 2.00 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good thewalls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 2 | Each | 15,000 ₹30,000 | 16,000 ₹32,000 |
| 3.00 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 2 | Each | 15,000 ₹30,000 | 9,000 ₹18,000 |
| 4.00 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 6 | Each | 8,500 ₹51,000 | 8,000 ₹48,000 |
| 5.00 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 6 | Each | 3,500 ₹21,000 | 3,400 ₹20,400 |
| 6.00 | Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 12 | Each | 10,000 ₹1.2 L | 9,500 ₹1.1 L |
| 7.00 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 6 | Each | 350 ₹2,100 | 450 ₹2,700 |
| 8.00 | Providing and fixing 100 mm sand cast Iron grating for gully trap.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 12 | Each | 200 ₹2,400 | 350 ₹4,200 |
| 9.00 | Providing and fixing 600*450 bevelled edge mirror of superior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 12 | Each | 2,800 ₹33,600 | 2,900 ₹34,800 |
| 10.00 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. PN - 16 Pipe, 25mm OD (SDR-7.4) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge | 105 | Per Running meter | 450 ₹47,250 | 480 ₹50,400 |
Tender Value
₹7.8 L
EMD Value
₹15,700
Closing Date
27 Jan 2026, 12:00 pmClosed
Executive Engineer
Executive Engineer Dharamshala Municipal Corporation
Special repair of toilets in Dharamshala Municipal Corporation area.
2026_UDDHP_126111_1
7767-72 DMC
Open Tender
Civil Works - Buildings
90 days
Dharamshala
Please refer tender document
10 documents required · 10 mandatory
₹413
Commissioner DMC
₹15,700
31 Jan 2026
19 Jan 2026
27 Jan 2026
19 Jan 2026
27 Jan 2026
19 Jan 2026
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good thewalls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 100 mm sand cast Iron grating for gully trap.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 600*450 bevelled edge mirror of superior glass (of approved quality) complete with 6 mmthick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. PN - 16 Pipe, 25mm OD (SDR-7.4) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge.PN - 16 Pipe, 20mm OD (SDR-7.4) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-ChargePN - 16 Pipe, 20mm OD (SDR-7.4) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-ChargePN - 16 Pipe, 25 mm OD (SDR-7.4) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122mm long, weighing not less than 99 gms as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing PTMT stop cock of approved quality and colour.20 mm nominal bore, 89 mm long, weighing not less than 88 gms as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing PTMT pillar cock of approved quality and colour.15 mm nominal bore, 107 mm long, weighing not less than 110 gms as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing PTMT, push cock of approved quality and colour 15 mm nominal bore, 98 mm long, weighing not less than 75 gms as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 15 mm nominal bore, 105 mm long, weighing not less than 138 gms as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)(L.S.) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Square shape 450 mm internal dimensions as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Prioviding and laying PVC heavy duty pipe 8Kg pressure i/c all necessary fitting 100mm dia I;/c all lead and lift direction by engineer in charge (Market rate) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Prioviding and laying PVC heavy duty pipe 8Kg pressure i/c all necessary fitting 75mm dia I/c all lead and lift direction by engineer in charge (market rate) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Painting and writing of signs in front of toilets with apex paint (Market rate) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Make: KEI/Plaza/Anchor/ Anchor (Roma Plus)/Schneider (Livia)/ Legrand (Myrius) /L&T(Entice) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Group C.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
2 X 10 sq. mm + 2 X 6 sq. mm earth wire
3 x 1.5 sq. mm
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. Make: Anchor (Roma Plus)/Schneider (Livia)/ Legrand (Myrius)/L&T(Entice) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. Make: Anchor (Roma Plus)/Schneider (Livia)/ Legrand (Myrius)/L&T(Entice) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Single pole 6 Amp (Make:- Anchor/ Schneider/ Legrand/L&T) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Single pole 16 Amp (Make:- Anchor/ Schneider/ Legrand/L&T) as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
40 Amps. (Make:- Anchor/ Schneider/ Legrand/L&T)
63 Amps. (Make:- Anchor/ Schneider/ Legrand/L&T)
40 Amps. (Make:- Anchor/ Schneider/ Legrand/L&T)
63 Amps. (Make:- Anchor/ Schneider/ Legrand/L&T)
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing| enclosure with cover plate having locking arrangement and watering pipe etc. with charcoall coke and salt as required as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge.
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Ceiling Fan 1200 mm sweep (Make: Usha, Model: Technix Plus)/ Bajaj (Model: Sabse Tezz Kassels)/ Crompton (Model: WWHE).as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Exhaust Fan, Light duty, (Domestic) 300 mm sweep (Make: Usha, Model: Aeroclean LD)/Bajaj (Model: Freshee)/Anchor (Model: Anmol)/Crompton (Model: Drift air Plus) .as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Bulk Head Light LED 10 watt Makes:- Philips /Wipro/Panasonic/Bajaj.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
MCCB 63/100 Amp 18KA as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Supplying and fixing brass batten/ angle holder including connection etc. as required.as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Supplying and fixing LED lamps of 12 watt with polycarbonate diffuser on the existing light point as required complete in all respect as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Supplying and fixing LED lamps (focus light)of 32 watt with polycarbonate diffuser on the existing light point as required complete in all respect as per drawing and H.P.P.W.D technical specifications all lead and lifts and carriage of material as directed by the Engineer-in-charge
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
BOQ_185862.xls
BOQ • 0.31 MB
1SBD.pdf
Tender Documents • 3.14 MB
Download all tender documents and submit your bid