Repair and Renovation of FRH Galganzra

Steel work in built up tubular (round ,square or rectangular hollow tubes etc) trusses etc,including cutting hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc complete.Truss for front stair (13 ft x 10 ft)

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: 15.9.2 In cement mortar

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Providing and laying of dry stone soling tightly hand packed including watering levelling ramming etc all jobs completely done including all Carriage.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all Carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all Carriage LHS Staircase

labour charges for Filling of stones / in floors (Available at Site) For Back Side StairCase

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns.

Labour Charges for available RR Mas Stone Work Including Cement mortar 1:4 mix and curing.

Providing and fixing 2mm thick fibre glass of approved brand and manufacture for outer side of washroom walls (Room / Dinning Hall Side of Washroom Walls )with necessary nails, fittings etc. complete job

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

15mm cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1 : 3 ( 1 cement : 3 fine sand)

EXTERIOR FINISHING Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Including Dismantling of Damaged Flush/Ruled Pointing and ranking out joints. 13.42.2 Raised and cut pointing

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work Including Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)( Old work)

Providingand fixing 20mm thick wooden planks Soffit / ceiling (Including frame work for base ) with M.S. screws Tounged/Grooved Budloo/fir wood(incl.Dismantling Of Old damaged Soffit /Ceiling )

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components includingcost of screws etc. completeFirst class poplar wood truss

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Incl.

Construction of cabinets/ almirah as per the direction of EIC using followling material of approved quality incl. cost of fitting etc beading of required size incl carriege complete(Incl.Inner side Primer /putty & Paint. 19mm plyboard

8mm dullmica shutters and Groove

Renewing glass panes, with putty and nails wherever necessary including raking out old putty :Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm)

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. 9.9.1 With Galvanized M.S. Wire gauge with wire of dia 0.63 mm 9.9.1.1 With 2nd class teak wood beading 62x19 mm

Providing and fixing following Hardware Items. L-Drop 300mm Without lock

L-Drop 300mm Without lock

Tower Bolt 150 mm

Tower Bolt 100 mm

Handle 150mm

Handle 100 mm

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness

ornamental Handle 300mm

ornamental Handle 150mm

Concealed lock

Door Closer (Steel)Spring) (OLD model)

Engagement of Carpenters. For easing of doors,windows including cutting dismantling and refixing in the same postion,rebating and minor repairs stacking of unserviceable material disposed off complete job.Skilled carpenter

Skilled Helper

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm) 18mm thick

Providing edge moulding including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.

Kota stone slab flooring 25mm thick over 20mm (average)thick base laid over and jointed with grey cement slurry mixed with pigment tomatch the shadeof theslab, including rubbing,polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing following Sanitary items. CP Bibcock

CP Soapcase

CP Grating

Helth Faucet

Wall mixer With Hand Shower Option (2 In 1)

Basin Mixer

Hand shower

Angle Valve

Angle value Angular Stop cock with wall Flange.

PVC connection (24")

PVC connection (18")

CP cup

PVC waste pipe flexible

Towel Rod

Providing and fixing P.V.C low level flushing cistern with manually 18.0 (Sanitary Installation) 240 CODE NO. DESCRIPTION UNIT RATE ₹ controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity –

Providing and fixing of water heater (geysers) of Venus / Recold or equavalent make of 50-liter capacity including all fittings / fixtures as required complete.

P/F PVC pipe Prince Type-B and PVC fittings of approved quality Pipe 4"

Plain Bend 3"

Plain Bend 4"

Door Tee 3''

Door Tee 4"

Door bend 3''

Door bend 4"

REDUCER 4'' TO 3''

VENT PIPE 3''

Providing and fixing MS square bars and flat for ticket window including the cost of welding.incl steel primer & Steel Paint.

Engagement Of Plumber for remoing of damaged GI Pipes and Bal Valve and refixing of same

Helper

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 19.4.1 Internal work-Exposed on wall 19.4.1.1 15 mm dia. 20mm Dia nominal bore Medium

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

Lighting Points incl. Wiring in 1.5 sq.mm PVC insulated copper wire and 2.5 sq.mm PVC insulted multi standard coper wire for lighting sub mains,.6 Amp MCB,10 AmpDp MCB,2 Way Db for housing MCB.

Heating Point Including wiring in 2.5 sq.mm PVC insulated copper wire and 4.0 sq.mm pvc insulated multistandard copper wire for lighting sub mains 16 Amp Switch socket combined 2 mm thick PVC conduit / channels ,junction boxes ,10 Amp MCB Amp DP MCB 2 way DB for housing MCB.

Providing/Laying/ Fixing of exhust Fan approved quality.

Fan Points Including Wiring in 1.5 sq.mm PVC Insulated copper wire 1200 mm ceiling fan /225 exhast fan with roses and PVD SQ .block ,350 wattsa electronic fan dimmer ,2 mm thick PVC conduit /channel with bends ,junction boxes ,06 Amp mcB ,10 Amp DP MCB,2way DB for housing MCB.

Supplying/fixing/ testing and commissioning of following electric items Of ISI marked of app.make and manufacture.ceiling fan

12-15 watt concealed/surface cielling LED lights

Head Blub

Providing and Fixing of Stain Less Steel Curtain rods with side nobes including CREWEL curtains approved brand and quality

Providing And Fixing Pvc mainhole cover 18''*18''