12/2025-26/EE(C)/ Pashulok Barrage

Amount

Earth work in excavation In All kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m including supply of all materials, labour and T&P etc. required for proper completion of the work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- 1:1½:3 1 Cement: 1½ coarse sand zone-III): 3 graded stone aggregate 20 mm nominal size) as per direction of E/I including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level including supply of all materials, labour and T&P etc. required for proper completion of the work

Providing and laying in position cement concrete of specified grade 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level including supply of all materials, labour and T&P etc. required for proper completion of the work

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.including supply of all materials, labour and T&P etc. required for proper completion of the work

12 mm cement plaster of mix1:6 (1 cement: 6 fine sand ) Including supply of all material labour T&P etc. including supply of all material labour T&P etc. required for proper completion of the work.

15 mm 1:4 (1 cement : 4 fine sand) cement plaster on rough side of single or half brick wall of mix including supply of all material, labour & T&P etc. required for proper completion of the work.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes.including supply of all materials, labour and T&P etc. required for proper completion of the work

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including supply of all materials, labour and T&P etc. required for proper completion of the work.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. including supply of all material, labour, T&P etc. required for proper completion of the work including supply of all material, labour, T&P etc. required for proper completion of the work.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete, including supply of all materials, labour and T&P etc. required for proper completion of the work

White washing with lime to give an even shade Old work (two or more coats) including supply of all material, labour, T&P etc. required for proper completion of the work.

Applying Primer Coats with primer of approved brand and manufacture having low VOC Content with water thinable cement primer on wall surface having VOC content less than 50 grames/liter including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including supply of all material, labour, T&P etc. required for proper completion of the work.

Distempering One coat with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour including supply of all materials, labour and T&P etc. required for proper completion of the work.

Distempering with 1st quality acrylic distemper Two Coat, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including supply of all material labour T&P etc. required for proper completion of the work.

Finishing walls with Acrylic Smooth exterior paint of required shade old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface including supply of all material, labour, T&P etc. required for proper completion of the work.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm). including supply of all material, labour, T&P etc. required for proper completion of the work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work including supply of all material, labour, T&P etc. required for proper completion of the work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. including supply of all material, labour, T&P etc. required for proper completion of the work.

Painting with aluminium paint of approved brand and manufacture to give an even shade Two or more coats on new work including supply of all material, labour, T&P etc. required for proper completion of the work.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. including supply of all material, labour, T&P etc. required for proper completion of the work.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). including supply of all material, labour, T&P etc. required for proper completion of the work.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). including supply of all material, labour, T&P etc. required for proper completion of the work.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand). including supply of all material, labour, T&P etc. required for proper completion of the work.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand). including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing 15 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. for external work including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing 20 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. for external work including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing 40 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. for external work including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing 50 mm dia nominal bore G.I. pipes complete with G.I. fittings including trenching and refilling etc. for external work including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore. including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 liter capacity - White . including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m². including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron), including supply of all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) including supply of all materials, labour and T&P etc. required for proper completion of the work

Providing and fixing 12 mm thick Pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) including supply of all material, labour, T&P etc. required for proper completion of the work.

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar, including supply of all material, labour, T&P etc. required for proper completion of the work.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below including supply of all material labour T&P etc. required for proper completion of the work.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below including supply of all material labour T&P etc. required for proper completion of the work.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand) @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete, including grouting the joints with white cement and matching pigments etc., complete. including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm. including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing expanded metal mesh of size 20x60 mm and strands 3.25 mm wide 1.6 mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages, excluding cost of hangers including supply of all materials, labour and T&P etc. required for proper completion of the work

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter. including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 32 mm dia. including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore. including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 15mm nominal bore G.I. Union in G.I. pipe including cutting and threadingthe pipe and making long screws etc. complete (New work) : including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 20mm nominal bore G.I. Union in G.I. pipe including cutting and threadingthe pipe and making long screws etc. complete (New work) : including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 50mm nominal bore G.I. Union in G.I. pipe including cutting and threadingthe pipe and making long screws etc. complete (New work) : including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 20mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 25mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :including supply of all material labour T&P etc. required for proper completion of the work.

Providing and fixing 65 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :including supply of all material labour T&P etc. required for proper completion of the work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. Including supply of all material, labour, T&P etc. Required for proper completion of the work.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid :Including supply of all material, labour, T&P etc. Required for proper completion of the work.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Including supply of all material, labour, T&P etc Required for proper completion of the work.

Providing, mixing and applying bonding coat of Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

Raised and cut pointing on stone work with cement mortar 1:3 including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.All works upto plinth level Concrete of Concrete of M25 grade with minimum cement content of 330 kg /cum including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.All works upto plinth level Concrete of M35 grade with minimum cement content of 370 kg /cum including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). including supply of all material, labour, T&P etc. required for proper completion of the work.

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 By Manual Means In area of thorny jungle including supply of all materials, labour and T&P etc. required for proper completion of the work.

Backfilling of Granular materia behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and laying filter material underneath pitching in slopes complete as per relevant drawing and technical specifications including supply of all material, labour, T&P etc. required for proper completion of the work.

Slip clearance (by manual means) of loose earth and other small loose materials including disposal complete as directed by the Engineer-incharge including supply of all material, labour, T&P etc. required for proper completion of the work.

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction including supply of all material, labour, T&P etc. required for proper completion of the work.

Random Rubble Stone Masonry laid Dry, in breast walls, retaining walls, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and laying Stone/Boulder pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 including supply of all material, labour, T&P etc. required for proper completion of the work.

Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications) including supply of all material, labour, T&P etc. required for proper completion of the work.

Dewatering of water caused due to seepage of ground water and surface water due to rain etc. excluding excavation of foundation but during execution of civil works including supply of all machine operator, khalashi, POL, T&P, accessories required for proper completion of the work.

Providing and laying of Empty Cement Bags ( Gunny Bags) filled with local sand and tightened using sutli and carriage upto site including preparing subgrade before placing in position, also including supply of all material, labour, T&P etc required for proper completion of the work

Epoxy mortar treatment over eroded concrete surface or in jointing of stone etc. of piers of head regulator gates in a ratio of 1Kg Epoxy resin (Araldite Gy257) : 0.5Kg Hardner (Aradur 840): 6 Kg quartze sand with prime and seal coat, including making all arrangements, cost of all material, labour and T&P etc. required for proper completion of the work and as directed by E/I

Hire charges of welding machine with single phase with welder, helper and electrodes for repair and welding of gates, door, window etc. for eight hrs. in a day. including supply of all material, labour, T&P etc. required for proper completion of the work.

Removal of debris /waste material/ any other material / rubbish on road side / park /dust bin and from any other location by full load tractor trolley within the specified area as desired by the Engineer-in- charge & safe disposal of the same out side the Power House area. including cost of all labour T&P etc required for proper loading/unloading and disposal of waste or required for the proper completion of the work.

Supplying and engaging unskilled labour with all T&P etc. as per requirement for attending miscellaneous works for full day as per direction of the Engineer in Charge for proper completion of the work including supply of all materials, labour and T&P etc. required for proper completion of the work

Attending minor type of repair for full day by engaging and supplying one suitable and experienced Painter/Carpenter/ Plumber with kits for attending of related work, defects as required and directed by Engineer-in-charge including supply of all materials, labour and T&P etc. required for proper completion of the work.

Cleaning of water tank-500 ltr including disposal of waste refuse by appropriate means without affecting environment including washing and cleaning by clear water complete rates including cost of all necessary arrangement with required T&P etc. Required for proper completion of work.

Relaying of existing stones pitching after dismantling of partially damaged slope including labour T&P etc for proper completion of work but excluding stones.

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2012,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ± 2%) Zinc coated, Mesh wire diameter 3.0 mm, mechanically edged/selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2mm, supplied @ 3% by weight of Gabion boxes, as per drawing, all complete as per direction of Engineer-in-charge including supply of all material labour T&P etc. required for proper completion of the work.

Engaging & operation of one no. wheel type excavator cum loader machine (preferably JCB/L&T/BEML etc) having capacity 75 BHP with one operator and one helper or skid steer loader Bob cat (height not more than 2.0 m) having capacity 75 BHP with one operator and one helper including cost of fuel lubricants and repair maintenance etc. for removal of slip / landslide/ excavation in dry and wet condition, complete in all respect as per direction of I/C. Payment for engaging excavator cum loader shall be made only for actual working hours at site, no idle charges shall be paid. If machine is trapped in slip / earth, contractor shall make its own arrangement to haul the machine, for which no extra payment shall be made to contractor, and also machine shall be considered in idle condition. Cost of mobilization & demobilization from site shall be borne by contractor. including supply of all material, labour, T&P etc. required for proper completion of the work.

Engaging & operation of one tractor along with one driver and one helper & trolley having hydraulic jack arrangement. Including cost of fuel lubricants and repair maintenance etc. for removal of slip / landslide/ excavation in dry and wet condition, complete in all respect as per direction of I/C. Capacity of tractor must be not less than 45 BHP, and loading capacity of trolley must not be less than 2.25 cum. Payment for engaging Tractor with trolley shall be made only for actual working hours at site, no idle charges shall be paid. If tractor is trapped in slip / earth, contractor shall make its own arrangement to haul it, for which no extra payment shall be made to contractor, and also tractor shall be considered in idle condition. Cost of mobilization & demobilization from site shall be borne by contractor. Cost includes the average running of 20 Km per day including supply of all material, labour, T&P etc. required for proper completion of the work.

Providing San (Tree fibre) for gate sealing in dry condition free from any foreign material like dust, wooden pieces etc.

Providing and applying of Jute Bori (size 26"x 44" approx.) for stopping the leakage of Barrage gates, apply as per directed by Engineer-in-charge, including supply of all material, labour, T&P etc required for proper completion of the work.

Cleaning of Seepage drains to the right of right Afflux Bund including all labour material T&P etc required for proper completion of work. It also include disposal of sludge and garbage including supply of all materials, labour and T&P etc. required for proper completion of the work

Pawan Kumar Thekedar (BID ID -407872)

Parag Jain (BID ID -407816)