Maintenance works Base Camp

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. 01 MTR from cutting edge

All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size)

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work

foundation footings, base of columns etc

Suspended floors, roofs landings balconies and access platforms.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid seperately

First class kail wood

Second class kail wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position SAL WOOD

P/F ply wood 5 ply 6 mm thick with commercial ply on both sides with all necessary nails including labour and material all complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on one side and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminated conforming to IS: 12823, Grade-I, Type-II marked :

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately). 12mm thick commercial ply conforming to S : 1328 BWR type

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws. 2nd class kail wood

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and Fixing the following

aluminum tower bolts ISI marked anodized with necessary screws 150x10mm

Alluminium sliding door bolts ISI marked anodized with nuts and screws complete. 250x16mm

Alluminium handles ISI Marked 100mm

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Mirror polishing on marble work/granite/stone work where ever required to give high gloss finish complete.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing track deck profile G. S. sheets of any pattern and colour as required and directed by EIC in roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.80mm thick

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

Renewing glass panes, with wooden fillets and nails whereever necessary float glass 4 mm thick

Appling priming coat with ready mixed pnk or grey primer of approved brand and manufacturer on wood work (hard and soft wood)

Lettering with black Japan paint of approved brand and manufacture

White washing with lime to give an even shade :

Removing white or colour wash by scraping and sand parering and preparing the surface wmooth including necessary repairs to scratches etc complete

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade (one or more coats ) on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (one or more coats old work)

Painting with almunium paint of approved brand and manufacture to give and even shade. OLD

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give and even shade. OLD

Finishing wall with water proofing cement paint of required shade.Old work ( One or more coats applied @ 2.20 kg/10 sqm) over coat of primer applied @ 0.80 ltr /10 sqm complete including cost of priming coat

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area below 40 sqcm.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick

Supplying and stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment)

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads & lifts

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling.

15mm dia nominal bore (medium)

20mm dia nominal bore (medium)

25mm dia nominal bore (medium)

32mm dia nominal bore (medium)

40mm dia nominal bore (medium)

50mm dia nominal bore (medium)

80mm dia nominal bore (medium)

Supply of following GI accessories

GI Bend 15mm dia nominal bore (medium)

GI Bend 20mm dia nominal bore (medium)

GI Bend 25mm dia nominal bore (medium)

GI TEE 15mm dia nominal bore (medium)

GI TEE 20mm dia nominal bore (medium)

GI TEE 25mm dia nominal bore (medium)

GI Union 15 mm NB (medium)

GI Union 20 mm NB (medium)

GI Union 25 mm NB (medium)

GI Socket 15mm dia nominal bore (medium)

GI Socket 20mm dia nominal bore (medium)

GI Socket 25mm dia nominal bore (medium)

P/F valves of following sizes

Gate valve 25 mm NB

Gate valve 32 mm NB

Ball Valve 15 mm NB

Ball Valve 20 mm NB

Ball Valve 25 mm NB

Providing UPVC pipe including jointing with seal ring (Finolex supreme)

75mm dia pipe

110mm dia pipe

Providing UPVC bend including jointing with seal ring (Finolex supreme)

75mm dia

110mm dia

Providing and fixing water closet squtting pan (Indian type WC pan) with 100 mm sand cast Iron P or S trap, 10 lit Low level PVC flushing cistern including flush pipe (of approved make) manually, controlled device (handle lever) conforming to IS : 7231 with all fitings and fixtures complete including cutting and making good the walls and floors wherever required.

Orrisa pattern white viterous china WC pan of size 580x440 mm with integral type foot rests

Providing and fixing white viterous china pedestals type water closet (European type WC pan) with seat and lid, 10 lit low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixture complete including cutting and making good the walls and floors wherever required.

WC pan with ISI marked with solid plastic seat and lid

Supply and installation of water tank at all heights excluding base and fittings, but making suitable holes. Of standard quality like sintex, electroplast, star, lotus or equivalent witl valid license

Providing and fixing wash basin witn CI /MS brackts 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, including painting of fittings and barrackets, cutting and marking good well wherever required. (size 550x400mm)

Providig and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size respectively.

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete. (Hindware/Cera/Parry ware make).10 ltr capacity white.

Providing and fixing solid plastic seat with lid for pedestal type WC pan complete (HindwareCera) white solid plastic seat with lid.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete Flixible pipe 32mm dia

Providing and fixing the following sanitary accessories.

short nose bib cock 15 mm NB

long nose bib cock15 mm NB

Angle valve15 mm NB

Baisn Mixer weight not less than 1.97 kgs

Jet with rod complete

Floor/ Nahani Trap with grating

Soap case

Towel rod 45 cm long

PVC connection pipes with brass union 45 cm

Towel ring PTMT

Waste coupling for wash basins

Stainless steel shelf 45 x 10 cm

Glass Shelf

Toilet paper holder

Liquid soap container

mirror of superior glass with plastic moulding size 450 x 350 mm

Disposal of mulba/garbage/filth by mechanical means/ transportation to disposal site(not less than 2 kms) including loading un loading and staking at site. TROLLEY

Providing and fixing the following Machenery/ Equipment.

Welding Machine including generator rods all complete with carriage

Providing of drinking water through tanker at various location of project like Chanderkote, power house, Baglihar and Dharmund colonies.

Silp clearence in soils mixed with mud/ morrum/ kanker/ boulder etc, lift upto 1.5 mtr lead upto 50 mtr

Supply of following items of standard quality like havels/ anchor or equivalent with ISI mark

1.5 sqmm wire

2.5 sqmm wire

4.0 sqmm wire

10.0 sqmm wire

LED 9 watt

LED Tube light with rod, base and choak all complete

6 Amp socket/Switch plain

16 Amp socket And Switch combined

MCB 32 Amp SP

MCB 64 Amp DP

Phenolex Laminated Sheet

Angle Holder plane

Tube Rod only

Ceiling Fan 48 inch

Exhaust fan 12 inchs

3 pin top 16 amp

Step up Fan Regulator with dimmer

S/F of LED console lamps 9 watt on surface or in ceiling as required, of specific brand surya, Philips etc.

P/F street LED lights of standard make not less than 40 watt, including fixing and fasteners all complete. LMR

Supply of labour for repair works at different locations within project area

Mazdoor/ labour/Helper

Sweeper

Sewer man/Mali

plumber

electrican

Carpenter ist class

Mason

welder

Driver

Rewinding of motors of following equipments.

Ceiling Fan 48 inch

monoblock water pump

Submersible pump including taking out and lowering back, testing all complete

Carriage of materials by MT including loading, unloading and stacking at site

Cement average 10 km

Sand average 125 km

Aggregate average 15 km

Stones average 04 km

Morrum/ rubbish average 04 km

Bricks average 110 km

Steel average 50 km

Rafayat ALi

Amit Gupta