Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹27.6 L+₹72,493 (2.70%)Rejected-AOC | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹28.2 L+₹1.3 L (4.91%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 4 | L4₹28.7 L+₹1.8 L (6.80%)Rejected-AOC | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
REPAIR REPLACEMENT AND MAINTENANCE OF MAIN FILTRATION SYSTEM DOZING PLANT PUMPING SYSTEM STARTER PANEL AT MIL STN GANDHINAGAR
2022_MES_545909_2
GE(A)/GNR/TOKEN/51 of 2022-23
Open Tender
Civil Works - Water Works
Item Rate
90 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹60,000
Yes
4 Nov 2022
16 Sept 2022
1 Oct 2022
16 Sept 2022
29 Sept 2022
17 Sept 2022
Amount
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as specified and directed.
Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Taking up or down steel tubing and connections for repair & replacement complete all as specified and directed of size 40mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for repair & replacement complete all as specified and directed of size 50mm bore of pipe complete all as specified and directed.
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for size 40mm bore of pipe complete all as specified and directed.
S&F, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed for size 50mm bore of pipe complete all as specified and directed.
S&F, in replacement 3 core 10 Sqmm weather proof, PVC insulated and PVC sheathed multi stranded copper conductor submersible cable, flat type 1100 Volts as in submersible motor connection etc complete all as specified and directed by Engineer-in-Charge.
S&F, in replacement 3 core 16 Sqmm weather proof, PVC insulated and PVC sheathed multi stranded copper conductor submersible cable, flat type 1100 Volts as in submersible motor connection etc complete all as specified and directed by Engineer-in-Charge.
S&F, in repair, 150mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed.
S&F, in repair, air cooled reciprocating compressor 20kg/cm² such as piston, cylinder, piston ring, leakage of air tank, starter, hose pipe, motor winding etc. of three stage reciprocating, twin cylinder with 3.0 HP motor discharge 100 CFM Pulley and belts complete all as specified and directed.
Supply and installation in repair with testing digital water level indicator device, operating on single phase supply with electronically controlled upper level & lower level alarm indications by highly micro switches complete all as specified and directed.
M&L in repair for flexible copper cable PVC insulated and PVC sheathed of size 0.5 sqmm 4 core from tank to pump house for connection to the both the units complete all as directed. Make: Finolex/Anchor/Plaza/Polycab.
Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. as specified and directed for 1350mm x 1000mm x 1200mm size complete all as specified and directed.
Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. as specified and directed for 1535mm x 1500mm x 1200mm size complete all as specified and directed.
Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. as specified and directed 1050mm x 750mm x 1000mm size complete all as specified and directed.
Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. as specified and directed for 900mm x 600mm x 1000mm size complete all as specified and directed.
S&F, in repair, cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
S&F, in repair, cast iron sluice valve 250 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
Taking up, 200mm bore, DI water mains (including all fittings) with spigot and socket ends and rubber tytan joints including removing out joints complete all as specified and directed.
M&L for, 200mm bore, DI water mains (including all fittings) with spigot and socket ends and rubber tytan joints Class K9 in any length laid in trenches complete all as specified and directed.
S&F in repair brass/SS spindle for sluice valve of size 200mm dia complete all as specified and directed by Engineer-in-charge complete all as specified and directed.
S&F in repair brass/SS spindle for sluice valve of size 250mm dia complete all as specified and directed by Engineer-in-charge complete all as specified and directed.
S&F in repair brass/SS spindle for sluice valve of size 300mm dia complete all as specified and directed by Engineer-in-charge complete all as specified and directed.
S&F, CI/DI fittings, bends, tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of size up to 300 mm bore complete all as specified and directed
Disconnecting the existing monoblock pump set, 1 HP complete with wheel rotter from electric connection and water connection & lifting from Alam dozing filter bed foundation, transporting to workshop for repair, de-assemble the pump set, taking out burnt winding wire from the armature housing, cleaning of slots and rewinding the complete armature with appropriate winding wire with 'E' class insulataion including insulataing materials, varnishing including replacement of fan wheel belt, hose bearing, re-assembling the complete pump set after repair includingall as specified and fixed in same position, comisioning and testing complete all as specified and directed. Note: Quoted rate include transportation of pumpset from pump house to auth workshop and back.
Taking out existing filter media for gravity type water filtration Bed such as (River-Mahi/Sevaliya Gujarat) sand gravels etc from the filtration plant at Narmada pump house Gandhinagar height aprox 3 mtrs, with the help of electrically operated lift machine / crane, scrapping out complete side wall of plant with the help of wire brush taking out complete material and depositing the serviceable material site and removing the rest of the material to a distance exc 1.00 Km and not exc 1.5 Km all asa directed. Note: The contractor will ne submit the invoice copy of gilter media grade of the river sand Mahi/ Sayaliya Gujarat.
Relaying of serviceable gravel of size 30mm to 40 mm retrieved from item No 1 after cleaning washing, laid in layers in the filter bed complete all as directed.
M&L for gravels of graded size 30mm to 40mm laid in layers in the filter bed complete all as directed.
M&L for fine sand / gravels of graded size 10mm to 20mm laid in layers in the filter bed complete all as directed.
M&L for fine sand / gravels of graded size 5mm to 10mm laid in layers in the filter bed complete all as directed.
M&L for fine sand / gravels of graded size 2mm to 5mm laid in layers in the filter bed complete all as directed.
M&L for silex fine sand laid in layers of 70cm thick in the filter bed complete all as directed.
Supply & fix in repair heavy duty PVC pipe of 20mm dia Alum dosing unit complete all as specified and directed.
Opening and overhauling alum dosing unit incl replacement of motor gear nox assembly complete all as specified and directed.
Cleaning of existing filtration bed by scraping, scrubbing the algae formation and dirt from the internal surfaces of the tank and from mouth of circulating pipes etc and removing all silt and other materials cleaning the tank with lime and fresh water internally complete all as specified and directed.
Dismantling and taking out suspended angle iron frame of filter bed, supply & in position new frame using angel iron 50 x 50 x 2mm of suitable size complete all as specified and directed.
Supply and laying in repair of PVC flock module for suitable of existing size of sedimentation bed with taking out the old unserviceable flock module & resetting of any size with cleaning of sedimentation bed by suitable chemical & cleaning of all side walls by removing of all dirt/ mud/ sclaes by wire brush complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint on cast iron pipes installed at pump (as per MES colour code) inlet and outlet pipe including writing letter/figure 2mm thick and 2 cm in height with black ink over white base in capital letter complete all as specified and as directed.
M&L for carrying out repairs and rewinding to 30 HP capacity mono block pump set, motor, 3 phase 415 Volt of any make Kirloskar, Jyoti, Crompton Greaves / Mother platt) with super enameled copper winding wire of appropriate gauge, insulation and varnishing with 'E' class varnish including replacement of water seal, dismantling existing motor from foundation after disconnecting electric connection transporting the same at work shop for repair and back at site after repair, reassembling with pump, commissioning and testing etc complete all as specified and directed by Engineer-in-charge.
M & L in repacement for fully automatic star delta starter Max Motor Output at 415V, 3 Ph suitable for 30HP Capacity monoblock pump set of L&T Cat Part No SS90705 or equivalent in Siemens and ABB etc complete all as specified and directed by Engineer-in-charge.
Supply only Alum ferric 'A' class, complete all as specified and directed.
Supply only Sodium Hypo Chloride (Liquid Chlorine) 100 GPL (40 to 50%) in container of 35 Ltrs with ISI marked complete.
Supply only, Calcium based, Calcium hypo cloride, white to off white, free flowing granular, chlorination chemical having 65%-70% chlorine content, (Calcium based granular disinfectant for water treatment dirnking water) complete all as specified and directed. Make:- SREE RAYALASEEMA/DECLIBAC or equivalent as approved by GE
S&F, in repair, Agitator with motor 120 Watt, 900 RPM, single phase flanged mounted motor, incl plastic shaft and impeller, voltage input, 230 volts 50 Hz incl taking down old demaged unserviceable motor complete all as specified and directed.
Supply and Fix in repair auto starter 200 Amp cum fault analyzer cum protection & control panel fabricated out of 16 guage sheet for 60 HP motor .provided & fitted with MNX -140-2Nos,MNX-110-01No,of approved make along with MCCB of 200 Amp rating (thermal magnetc) with rotary handle also of (L&T/SIEMENS/SCHNEIDER) & Thermmal over load protection range (66-110) for 65 HP -01 No Star delta timer 1 No Digital fault analyzer cum controller which provide protection against low voltage below 375 V, High voltage above 445 V, single phasing, reverse phasing, Un balanced phasing, Dry running, overloading with toggle switch for by passing fault analyzer system including 01 set phase indicating lamp, 01 No 3 phase digital volt meter & 01 No 3 phase digital amp meter should be provided alongwith suitable current transformer. The internal control wiring should be done with flexible PVC LT copper wire with proper thimbling at each end. LED contactor 'COIL OK', indicators, one for each of the contactors / coils, LED star and delta indicators to access the star to delta timing and an audio warning system/ siren which activate only on starter failure. (Bus bar cap - 200 Amp Aluminum) Complete all as specified and directed
Dismantling existing pipe connections and electrical connections, de-watering and lifting up the submersible pumps of cap 60 HP motor 3 phase 415 volts 50 HZ carefully and transporting to workshop for repair and bringing back at site after repair and lowering the same including making the water and electric connection including commissioning and testing complete. Note :- (i) Repair of submersible pump and pump motor shall be measured & paid separately under respective item of this schedule. (ii) T&P shall be arranged by the contractor. (iii) Transportation of pump set from site to workshop and bringing back at site inclusive in quoted rate.
De-assembling of electric motor of 60HP of submersible pump set (Make KSB), cutting and removing the existing burnt winding wire of any gauge, cleaning and making good the slots, rewinding the electric motor with PVC insulated copper wire of appropriate size/gauge, application of insulating material & varnishing including replacing of ball bearings-02 Nos, moisture seal and re-assembling the motor, commissioning & testing complete to the entire satisfaction of Engineer-in-charge all as specified and directed.
De-assembling of submersible pump assembly of cap 60HP Make-KSB, for repair by replacing of company recomended parts of Mechanical seal - 2 Nos, CI impeller - 1 No, Lower Bearing - 1 No, O Ring - 1 No, Spiral plate - 1 No, Compay recomended Lubriucating oil - 7 Ltrs, Moisture sensor including bolts, nuts and washers, re-assembling the same and comisioning & testing complete all as specified and directed.
Dismantling existing pipe connections and electrical connections, de-watering and lifting up the submersible pumps of cap 55 HP motor 3 phase 415 volts 50 HZ carefully and transporting to workshop for repair and bringing back at site after repair and lowering the same including making the water and electric connection including commissioning and testing complete. Note :- (i) Repair of submersible pump and pump motor shall be measured & paid separately under respective item of this schedule. (ii) T&P shall be arranged by the contractor. (iii) Transportation of pump set from site to workshop and bringing back at site inclusive in quoted rate.
De-assembling of electric motor from 55HP submersible pump set (Make KSB), cutting and removing the existing burnt winding wire of any gauge, cleaning and making good the slots, rewinding the electric motor with PVC insulated copper wire of appropriate size/gauge, application of insulating material & varnishing including replacing of ball bearings-02 Nos, moisture seal and re-assembling the motor, commissioning & testing complete to the entire satisfaction of Engineer-in-charge all as specified and directed.
De-assembling of submersible pump assembly of cap 55HP Make-KSB, for repair by replacing of company recomended parts of Mechanical seal - 2 Nos, CI impeller - 1 No, Lower Bearing - 1 No, O Ring - 1 No, Spiral plate - 1 No, Compay recomended Lubriucating oil - 7 Ltrs, Moisture sensor including bolts, nuts and washers, re-assembling the same and comisioning & testing complete all as specified and directed.
S&F, in repair, cast iron sluice valve 100 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
S&F, in repair, cast iron sluice valve 80 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
S&F in replacement 3 core 25 sqmm weather proof,PVC insulated and PVC sheathed multi stranded copper conductor submersible cable,flat/round type 1100 Volts as in submersible motor connection etc complete all as specified and directed by Engineer-in-charge.
S&F, in repair/ replacement of injector chemical dosing pump working in 230volt single phase, 50Hz high flow rate of 0-20 LPH and high pressure of 10Kg/cm2 and strokes/ minute of max 135, min 15 with motor incl accessories, injection check valve, foot valve and discharge tubing,foot valve incl taking down old demaged pump assembly complete all as specified and directed. Make -SREE RAYALASEEMA or equivalent as approved by GE
S&F, in repair chemical dosing tank model no AQUA1006 of net capacity 100Ltrs. FRP DOSING TANK DIA 540 x bottom dia 480mm x height 575 consisiting of water inlet line,injector dosing PUP inlet arrangment, over flow level gauge, injection port complete all as specified and directed.
Supply only Poly Aluminium Chloride-AC/100S of Technologies or equivalent as approved by E-in-C's branch, In-organic soluable polymer powder, effective in both high & low turbidity, rapid and better floac formation, much lower dosing rates, less sludge genaration, less PH reduction, ISI marked in 25 Kgs plastic bags complete.
Ramdev and Sons
ALBA AC AND REF SERVICES
Shree Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .