Repair and Painting work of entire Court Complex and the Complete Boundary wall of the Civil Court, Ramgarh

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying 1mm thick white cement based wall putty--do--do--complete.

Providing one coat of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coat of acrylic smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete:

Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt,scales grease including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including preparing the surface after cleaning removing dirt,scales grease including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285,...all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door,window,ventilators shutters and partitions etc…..complete.

With float glass panes of 5mm thickness

Carriage of materials

sand - 10 km

Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt not less than 350gms) with extra socket all complete as per specification and direction of E/I.

Providing and fixing male ended 15mm size C.P brass pillar cock (wt not less than 350gms) C.I body brass spndle pillar cock of approved quality as per specification and direction of E/I.

Providing & fixing G.M non return valve Horizontal/vertical type of approved quality as per specification and direction of E/I.

Horizontal-32mm dia

Vertical-25mm dia

Providing & fixing 15mm dia 45cm long PVC connection pipe with heavy quality brass coupling at both ends etc. complete as per specification and direction of E/I.

Providing and fixing gun metal full way valve of approved quality, all complete as per specification and direction of E/I.

20 mm dia

25 mm dia

32mm dia

Supplying,fitting & fixing following items complete with all materials as per specification and direction of E/I.

Glass shelf with c.p brass rail-450mmx125mm

Mirror of 6mm thick plate glass bevelled edge mirror including …complete. 450mmx300mm

C.P. brass towel rail 20mmx600mm with bracket container

C.P brass soap dish container medium w=quality with screw and hinges etc.

Supplying,fitting & fixing following items complete with all materials as per specification and direction of E/I.

10.0l capacity P.V.C low design cistern

32mm dia P.V.C waste pipe 750mm long with coupling

100mm dia steel jali

Supplying, fitting and fixing40mm high white vitreous glazed type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid

Supplying, fitting and fixing vitreous white glazed earthenware wash hand basin of parry or hindustan or any other …….etc all complete as per specification and direction of E/I.

Supplying, materials,labours for constructing inspection chamber ofdesignation class 75B bricks size 750mm deep, 600 x 450mm internal dimeension having 250mm wall thickness…….etc all complete as per specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion

Bend 87.5-75mm

Bend 87.5-110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work

25mm nominal outer dia pipes

32mm nominal outer dia pipes

50mm nominal outer dia pipes

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing brass/C.I stop cock of approved quality all complete as per specification and direction of E/I. Brass stop cock

15mm dia

20mm dia

25mm dia

Supplying,fitting & fixing flat back or angulr, lipped front vitreous white glazed earthenware urinal of …... complete with all materials as per specification and direction of E/I.

Flat back or standard corner (600mm x 350mm)

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

Please Enable Macros to View BoQ information