Installation of 06 no. Lighting Transformer at different location at Topa OCP under Kuju Area.

Amount

Errection of tubular pole of length exceeding 1O M but not exceeding 12M in cement concrete 1:3:6 (1 cement:3 coarse: 6 graded stone aggregate 40 mm nominalsize) foundation including excavation & refilling etc as required.

Supply of two lengths of channel iron 75 mmX40 MMX5 7 Ka Im double pole cross arm for 3 wire OH.kl1ne conductors complete with through bolts & nuts for clamping to the poles 50 mm X6 mm MS lats welded on one side th the channel iron and with bolts & nuts on the other side for lying cross arm together , including dr1lling holes for insulators Pins/fittings, nolts & nuts etc and pa1nting with primcr and finish point as required .

Earthing with copper earth plate 600 mm X 600 mm X 3 mn thick includ1ng accessones, and provd1ng masonry enclosure with cover plate having lock1ng arangement and waterng p1pe of 2.7 metre long etc witlh charcoalV coke and salt as required

Supply of l6 Sqmm single core Flexible Copper Cable

Supply and fixing of Copper lugs 16 sqmm

Supply and fixing of 1 iKV/B.3 KV 400 Amp G O AB switch

Supply & erection of DO Fuse

Installation of 10 KVA 3.3KV220V Lighting Transfomer

Supply and fixing of 4 core, 16SQMM copper cable

Supplying and making outdoor cable cnd termination with heat shrinkable jointing kit complete with all acccssories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 1 1l KV grade as required :50 sq. Mm

Supplying, installing. testing and commissioning of following capacity TPN tap off box made ofl.6mm thick sheet stecl enclosure duly painted with powdcr coating on existing rising mains complete with TPN disconnector FSU and HRC fuses,connections, earthing etc. as required. 63A TPN, 4 way

Supplying and fixing of following ways surface recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected duly powder painted, inclusive of PE( E&M) Topa Project 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outiets are required.) 4 way (4 + 12), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required, 63A

Total impact of GST for the purpose of CTC

Maa Katyayani Enterprises

MOHANLAL SAO