PROVN OF STORAGE SHED IN INF BN AREA,PROVN OF TOILET BLOCK FOR FSC AND SPL REPAIR TO BLDG NO T-35 AT NAUGAM UNDER GE 969 EWS BARAMULLA

Amount

Surface dressing n.exc 15cm deep and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge.

M&L for surface excavation n. exc 30 cm deep and averaging 15 cm deep in hard soil and getting out ,complete all as specified and directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, in foundation, laying of cables/pipes etc, or for shaft, well, cesspits, manhole, pier holes etc, not exceeding 10Sqm on plan and not exceeding 1.50m in depth and getting out in hard/dense soil, complete all as specified and directed by Engineer-in-charge.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundation as in mass concrete complete all as specified and directed by Engineer-in-charge.

M&L for form work to sides of concrete foundation footings bases of column, sides & soffits of foundation and similar work vertical or to batter complete all as specified and directed by Engineer-in-charge.

M&L for RCC M-25 Design Mix using 20 mm graded stone aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. complete all as specified and directed by Engineer-in-charge

Use and waste for Form work to Rough finished surfaces of concrete,formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed by Engineer-in-charge

M&L Reinforced cement concrete (design mix) M-25 Columns, pillars, piers, posts and struts complete all as specified and directed by Engineer-in-charge

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engineer-in-charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed by Engineer-in-charge.

Returning filling in, including spreading levelling, watering & well ramming in layers n exc 25 CM with any type of soil complete all as specified and directed by Engineer-in-charge.

Removing excavated material exc. 250 m and n.exc 500 m and depositing out of defence land complete all as specified and directed by Engineer-in-charge.

M&L for cement concrete Type B1 1:2:4 (20 mm graded aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed by Engineer-in-charge.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed by Engineer-in-charge.

M&L Reinforced cement concrete (design mix) M-25 Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-charge.

M&L Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:4) and rendering is to be finished even and smooth w/o using extra cement using integral water proofing compound(supply only of Liquid W P C shall be measured and paid separately).

M&L Rendering 5 mm thick plastering in ceiling of concrete surface in CM (1:3) and rendering is to be finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Supply only liquid water proofing compound complete all as specified and directed by Engineer-in-charge.

M & L for Mild steel TMT bars 10 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-charge.

M & L for Mild steel TMT bars 8 mm dia and over, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-charge.

All as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders in reinforcement, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9mm diacomplete all as specified and directed by Engineer-in-charge.

S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete complete all as specified and directed by Engineer-in-charge.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed by Engineer-in-charge.

S&F MS Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;hold fast ,railings; framework of water tanks and similar work complete all as specified and directed by Engineer-in-charge.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded agg as in plinth protection finished even and smooth w/o using extra cement

M & L for Rolled Steel section as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M & L for Rolled Steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engineer-in-charge.

M & L for Rolled Steel section as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M & L for Mild steel bolts with diametre of neck exc 12 mm but n exc 20mm. purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified and directed by Engineer-in-charge.

M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

M&L for Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engineer-in-charge.

S&F of 1.40mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) as in eaves board complete all as specified and directed by Engineer-in-charge.

Preparation of steel surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome on( exposed member)and painting with two coats of synthetic enamel paint on truss, purlin, Steel sheeting as in roofing complete all as specified and directed by Engineer-in-charge.

Preparation of steel surfaces of any description over 10 cm width or girth and priming with two coat of red oxide zinc chrome on unexposed member) complete all as specified and directed by Engineer-in-charge.

All as item No 35 above but one coat paint on old surface complete all as specified and directed by Engineer-in-charge.

M&L for Earth Filling under floors, forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed by Engineer-in-charge.

M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed by Engineer-in-charge.

M&L 100mm thick Cement concrete type B-2, 1:2:4(using 40 mm graded stone aggregate) in finished flooring without using extra cement complete all as specified and directed by Engineer-in-charge.

Rendering 5 mm thick setting coat as in skirting in cement and sand mortar 1:3 over plastered surfaces including finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Preparation of newly plastered surfaces of walls and applying three coats of white wash internally on walls complete all as specified and directed by Engineer-in-charge..

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed by Engineer-in-charge.

S&F 2nd class Hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engineer-in-charge.

S&F Plain, framed, panelled shutters 35 mm thick using second class Hard Wood, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engineer-in-charge.

Preparation of wooden surfaces of any description over 10 cm width or girth and priming with red oxide zinc chrome on( exposed member)and painting with two coats of synthetic enamel paint complete all as specified complete all as specified and directed by Engineer-in-charge.

S&F 100mm butt hinges ,Hy duty with galvanisad mild steel hinge pin ,anodised and fixed ,type B-21 complete all as specified and directed by Engineer-in-charge.

S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 150 mm long complete all as specified and directed by Engineer-in-charge.

S&F MS Bow Handle 150 mm complete all as specified and directed by Engineer-in-charge.

S&F aluminium alloy , anodised sliding door bolt with hasp, Staple ( bolt type) and fixing clips of sheet , cast or extruded section and fixing bolts and sliding bolts of extruded section or cast - aluminium alloy and fixed lenght of bolt 250 mm complete all as specified and directed by Engineer-in-charge.

M&L for non-skid coloured ceramic tile 7 to 8mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for glazed ceramic coloured tiles ( 300x450 mm) x 7 mm thick on vertical surfaces such as dado, skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement mortar over 15 mm thick plaster in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-charge.

S&F 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern low/high level white with inlet ball valve, float & handle including brackets, flush pipe complete all as specified and directed by Engineer-in-charge.

S&F PVC Connection 15 mm bore with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-charge.

M&L for (SWR) floor trap plain with grating jointed with solvent cement 75mm dia complete all as specified and directed by Engineer-in-charge.

S&F GI tubing medium grade galvanised with all fitting laid in trenches of fixed to walls or ceilling or laid in floors 15mm Bore complete all as specified and directed by Engineer-in-charge.

S&F GI tubing medium grade galvanised with all fitting laid in trenches of fixed to walls or ceilling or laid in floors 15mm Bore complete all as specified and directed by Engineer-in-charge.

S&F 15mm bore stop valves ISI marked cast copper alloy, chromium plated fancy type with long shank & cup (consealed type) screwed down for iron pipe 15mm Bore complete all as specified and directed by Engineer-in-charge.

S&F 15mm bore bib taps ISI marked, cast copper alloy chromium plated fancy type, screwed down for iron pipes complete all as specified and directed by Engineer-in-charge.

S&F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed by Engineer-in-charge.

S&F vitreous china wash basin, white flat back, size 580x450mm inlcuding CP waste coupling and PVC connection etc.complete all as specified and directed by Engineer-in-charge.

S&F 15 mm dia CP pillar taps fancy type with capstan heads, chromium plated, screws down high pressure, with or without lettered "Hot'or cold'with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge.

S&F steel ventilators with top hung shutters (dubble shutter insdie wire mesh and outside galss shutter) including hinges, steel peg stay & glazing bars complete all as specified and directed by Engineer-in-charge.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded agg as in plinth protecation finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-charge.

Supply & fix factory made solid panel PVC door shuuter 30mm thick (style) consisting of frame out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail & bottom rail on either side as as gap insert for top rail & bottom rail peneling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, jointed together with solvent cement, supplying and fixing in the frame at site all as specified and as shown in drawings.

S&F Aluminium Alloy Sliding bolt 300mm long with hasp, staple (bolt type ) and fixing clips of sheet, cast or extruded section and fixing bolts etc. complete all as specified and directed by Engineer-in-charge.

S&F aluminium anodised barrel tower bolts of extruded section 200mm etccomplete all as specified and directed by Engineer-in-charge.

S & F aluminium alloys handles fabricated type anodised 150mm long complete all as specified and directed by Engineer-in-charge.

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC (SWR ) pipes 110mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC (SWR ) pipes 75mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) bends 75mm dia provided with access doorcomplete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) bends 110mm dia provided with access door complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) junction single Tee 100mm dia fixed complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) vent cowl 100mm dia fixed complete all as specified and directed by Engineer-in-charge..

S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position 20 mm dia Ball brass valves,high pressure,with polythene float and flynut complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-charge.

Demolition of stone slabs & tiles of any description or thickness in floor, aprons, plinth protection etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-charge.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed by Engineer-in-charge.

Taking down shutter only exc 1.00 sqm but n.exc 2.00 Sqm each and refix in the same opening complete all as specified and directed by Engineer-in-charge.

Demolition of brick work, stone masonary or boulder masonary built in cement mortar complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

M&L Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring complete all as specified and directed by Engineer-in-charge.

M&L for vitrified ceramic tiles Dark shade 10mm thick (square/rectangular ) polished ,area of each tiles exc 0.36 sqm but not exceeding 0.42 sqm in floors ,in floors and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in-charge.

M & L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in plinth protecation finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

S&F in repair for 4 mm thick veenered decorative plywood grade 1 with one side decorative face fixed with nails in ceiling to timber work including dismantling of ceiling board with cover fillets complete all as specified and directed by Engineer-in-charge.

M&L 2nd class hard wood plain fillets square rectangular or triangular in section, clean swan section area exc 3 sq.cm not exc 6 Sqcm fixed with secured with nail or brads complete all as specified and directed by Engineer-in-charge.

S&F 2nd class hard wood in scantling clean swan timber framed and fixed to the position including dismantling of decayed timber complete all as specified and directed by Engineer-in-charge.

M&L for Granite ( any type) tiles 20 mm thick machine cut in skirting/dado, platforms etc bedded and jointd with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including grinding and polishing complete in any design and pattern complete all as specified and directed by Engineer-in-charge.

S & F sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including hacking out complete all as specified and directed by Engineer-in-charge.

S&F in repair for 2nd class soft wood fascia/boarding planned one side with butt joint 20 mm thick fixed complete including dismantling as specified complete all as specified and directed by Engineer-in-charge.

All as item No 94 above but fixing only clean swan boarding in repair complete all as specified and directed by Engineer-in-charge.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-charge.

S& F in repair Rotational moulded polyethyline water storage tank ( cylinrical vertical with close stop) hosted and fixed in position in repair all as specified 500 Ltrs capacity and incl Ball valves high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule 20mm dia

S & F in repair vitreous china wash basin with padestal, white, flat back, size 550x400mm, plug , porcelain stopper and including brackets with waste fittings and connection pipe etc complete all as specified and directed by Engineer-in-charge.

S&F in repairs Pillar taps, 15mm dia cast copper alloy fency type, with capstan heads, chromium plated. Screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly nuts screwed for iron pipe & fixed etc all as specified

Taking down steel tubing 15mm and connection including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-charge.

S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 15 mm bore complete all as specified and directed by Engineer-in-charge.

Taking down steel tubing 20mm and connection including cleaning for refixing or removal to store

S&F tubes medium grade galvanised with all fitting and fixed to wall or laid in trenches 20 mm bore

S&F Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 20 mm bore pipe complete all as specified and directed by Engineer-in-charge.

S&F for 15 mm bore in repair long nose bib taps, fancy type chromium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule and fixed complete all as specified and directed by Engineer-in-charge.

S & F in repair stop valves/angle valve concealled fancy type chromium plated screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore and fixed complete all as specified and directed by Engineer-in-charge.

S & F in repair 20mm stop valves cast copper alloy chromium plated screwed down high pressure , with cruth or butterfly handle screwed both end for iron pipe complete all as specified and directed by Engineer-in-charge.

S & F grating doom 100 mm dia of PTMTcomplete all as specified and directed by Engineer-in-charge.

S&F in repair PVC (SWR ) pipes 110mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-charge.

S&F in repair PVC (SWR ) pipes 75mm single socketed ,in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in-charge.

S&F shelf of PTMT fixed with and including brackets and screws complete in repairs complete all as specified and directed by Engineer-in-charge.

S&F PVC flushing cistern, 10 Litres capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china wash down water closet pan European type, white including seat cover providing plugs ,bedding in cement mortar 1:2 ,securing and waste fittings and connection pipe etc, pointingcomplete all as specified and directed by Engineer-in-charge.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china urinal ,full stall type ,white wall type complete including providing plugs ,bedding urinal against wall in cement mortar 1:2 ,securing urinal to plugs with and including 60mm long brass screws and urinal spreader and waste fittings and connection pipe etc, pointing around urinal back in cement complete all as specified and directed by Engineer-in-charge.

S&F in repair angle/stop cock (CP) with wall flange complete all as specified and directed by Engineer-in-charge.

S&F brass chromium plated tublar Towel Rail 20mm dia, 60cm long including side brackets complete in repairs complete all as specified and directed by Engineer-in-charge.

S&F in repair Health faucet (CP) with 8 mm dia 1 mtr long flexible tube with wall hook complete all as specified and directed by Engineer-in-charge.

M&L for hardcore (broken stone of guage n exc. 63 mm depositing spreed and levelled in layers n .exc 15 cm thick) watering and ramming to a true surface complete all as specified and directed by Engineer-in-charge.

M&L for PCC type D2(1:4:8) 40 mm graded aggregate as in sab base to paver block complete all as specified and directed by Engineer-in-charge.

M&L for Cement concrete interlocking paver block 60 mm thick M-35 with grey cement sand pigment glossy finished, laid and jointed complete all as specified and directed by Engineer-in-charge.

M&L for PCC (1:2:4) type B1 using 20 mm graded coarse aggregate finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

S&F RCC pipes 150 mm internal dia class NP3 laid in trenches and jointedcomplete all as specified and directed by Engineer-in-charge.

M&L for Concrete bed in cement concrete, 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) to 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Engineer-in-charge.

M&L for Precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole covers including necessary formwork required including setting in cement mortar (1:4), complete, all as specified and as directed.

Construction of septic tank for 10 users,On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete all as specified and directed by Engineer-in-charge.

Construction of Soakage well 1.2m internal dia and 3.00 m depth including excavation in hard/dense soil PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in footing stone honey comb / solid masonary in cement mortar 1:4 RCC (M-30 design mix) cover slab filled with brick bats including intercepting chamber screen chamber and disposal of soil complete all as specified and shown on drawings.

M&L for Plain cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregated) as in surface channel drain complete all as specified and directed by Engineer-in-charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed by Engineer-in-charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engineer-in-charge.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface complete all as specified and directed by Engineer-in-charge.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes 1.6 mm thick duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-

(a) M&L One light/Ex Fan/5Amp Same board point controlled by one switch

(b) M&L One switch socket combination 5 Amps on independent board

All as per item No. 2 herein before but with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 1.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly.

All as per item No.21 herein before but with 4 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 6 pin 15 Amps on independent board with 1.5 Sqmm copper conductor cable as earth lead connected to common earth complete all as specified and directed by Engineer-in-charge.

S & F Switch piano flush type 5 amps single pole one way complete all as specified and directed by Engineer-in-charge.

S &F Switch socket combination flush type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch complete all as specified and directed by Engineer-in-charge.

S & F Switch socket combination 5A/16A, 5 in 1, flush type complete all as specified and directed by Engineer-in-charge.na.

S & F in repair Ceiling rose surface bakelite surface 65x50 mm 3 trminals fixed on wall/ceiling and including PVC block complete all as specified and directed by Engineer-in-charge.

Supply and fixing LED luminarie Basic all purpose surface all mounted LED batten with polycarbonate housing and integrated electronic driver of 1x18W ,Code No-LUMILINEBS18WLED830SPCWH Make : Havells

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engineer-in-charge.

S&F in repair Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed by Engineer-in-charge.

S & F LED lamp 15 watts complete all as specified and directed by Engineer-in-charge.

Supply only LED lamp 15 watts complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Water, storage heater type of capacity 25 Litrs BEE 5 star, 230 volts complete all as specified and directed by Engineer-in-charge.

S & F Exhaust fan 230mm sweep 230 volt 50 Hz and connecting up including poision of cable from ceiling rose/connector to fan complete all as specified and directed by Engineer-in-charge.

S&F Heavy duty exhaust fan 300 mm sweep 1400 RPM complete all as specified and directed by Engineer-in-charge.

S&F LED Bulk head luminaires complete all as specified and directed by Engineer-in-charge.

S & F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. (Make:- Schneider as per cat part- NBKRESNDD08 or equivalent in Havell's or Standard)

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's. (Make:- Schneider as per cat part- C60H1P16AB or equivalent in Havell's or Standard, C&S)

Supply and fix in repairs MCB, single pole and neutral link 240 volts 6 to 30 Amps capacity fixed in DB's. (Make:- Schneider as per cat part- C60H1P16AB or equivalent in Havell's or Standard, C&S)

Material and labour for XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade of cross sectional area 10 sq. mm 2 core .

M & L Sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM

Material and labour for XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade of cross sectional area 16 sq. mm 2 core complete all as specified and directed by Engineer-in-charge.

M&L for sand cushioning in trenches for cable protection including consolidation complete all as directed.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in treanchs as cable protection complete all as specified and directed by engr in charge.

M & L GI Pipe , 'light grade', 40 mm bore for cable protection as a guard pipe complete all as specified and directed by Engineer-in-charge.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc complete all as specified and directed by Engineer-in-charge.

Making connection of PP-R distribution branch with PP-R main of 16 to 40 mm sizes by providing and fixing tee including cutting and making fusion joint etc.

PP-R Ball valves (brass insert) as per requirement of the site 20mm bore complete all as specified and directed by Engineer-in-charge.

3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and a n t i m i c r o b ia l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc 20 mm bore complete all as specified and directed by Engineer-in-charge.

Cutting existing steel tubing 25 mm dia for alterations or additions (Each cut measured) complete all as specified and directed by Engineer-in-charge.

Screwing existing steel tubing 25 mm dia for alterations or additions (or lengthening screw on pipe to form connector) and joining of tee 25/20mm complete all as specified and directed by Engineer-in-charge.

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm (3/4”) dia complete all as specified and directed by Engineer-in-charge.

Supply and fix 20 mm Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed.

MS DUTTA BUILDERS