Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l1₹3.9 LAccepted-AOC CHOCHUPARAMBIL ERATTUPETTA | IDUKKI | KERALA | 685501 | ₹3.9 L | l1 | Accepted-AOC L1 |
| 2 | l2₹4.2 L+₹32,218 (8.24%)Rejected-AOC | ₹4.2 L+₹32,218 (8.24%) | l2 | Rejected-AOC L2 |
| 3 | l3₹4.4 L+₹47,024 (12.0%)Rejected-Finance | ₹4.4 L+₹47,024 (12.0%) | l3 | Rejected-Finance reject |
| Sl No | Description | Qty | Unit | RAVI C L3 | SHAHUL HAMEED L1 | BIJU M L2 |
|---|---|---|---|---|---|---|
| 1.00school parking roofing | ||||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 2.16 | cum | 377 ₹814.32 | 339 ₹732.24 Lowest | 367 ₹792.72 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 2.16 | cum | 9,451 ₹20,414.16 | 8,714 ₹18,822.24 Lowest | 9,441 ₹20,392.56 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 920 | kg | 246 ₹2,26,320 | 218 ₹2,00,560 Lowest | 236 ₹2,17,120 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 360.3 | kg | 201 ₹72,420.3 | 176 ₹63,412.8 Lowest | 191 ₹68,817.3 |
| 1.00 | OD307083/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy
primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The
sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting to size and shape wherever required.Details of cost for 216.14 sqm (External dimension of plinth). Area of roof = 20.2x10.70 m =
216.14 sqm. | 150 | sqm | 634 ₹95,100 | 577 ₹86,550 Lowest | 624 ₹93,600 |
| 1.01 | OD337000/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.350 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm) | 40 | metre | 378 ₹15,120 | 339 ₹13,560 Lowest | 368 ₹14,720 |
| 1.01 | OD307162/2025-2026:Engaging Beldar | 5 | each | 1,116 ₹5,580 | 1,021 ₹5,105 Lowest | 1,106 ₹5,530 |
| 1.01 | OD307103/2025-2026:Supplying and Fixing Information board 75x60 cm using GI pipes as post and MS
sheet surrounded by MS angles including painting, lettering and fixing in position as per
direction of engineer in charge | 1 | each | 2,250 ₹2,250 | 2,252 ₹2,252 | 2,240 ₹2,240 Lowest |
Tender Value
₹5 L
EMD Value
₹10,592
Closing Date
31 Oct 2025, 6:00 pmClosed
Assistant Engineer,LSGD Section,Kattakada
O/o the Assistant Engineer,LSGD Section,Kattakada
Kattakada GP Proj No 285/26 Kuruthamkod LPS Park Navekaranam
2025_LSGD_813440_9
51/ET/KTDA/25-26
Open Tender
Civil Works - Others
Item Rate
180 days
Kattakada Grama Panchayath
Please refer Tender documents.
6 documents required · 6 mandatory
₹935
Yes
₹10,592
Yes
1 Jun 2026
24 Oct 2025
4 Nov 2025
24 Oct 2025
31 Oct 2025
24 Oct 2025
Amount
school parking roofing
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD307083/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Details of cost for 216.14 sqm (External dimension of plinth). Area of roof = 20.2x10.70 m = 216.14 sqm.
OD337000/2025-2026:Providing and fixing precoated galvanised steel sheet roofing accessories 0.350 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)
OD307162/2025-2026:Engaging Beldar
OD307103/2025-2026:Supplying and Fixing Information board 75x60 cm using GI pipes as post and MS sheet surrounded by MS angles including painting, lettering and fixing in position as per direction of engineer in charge
BIJU M (BID ID -2419423)
RAVI C (BID ID -2419522)
Bidder Name
RAVI C
SHAHUL HAMEED
BIJU M
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1360715.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
285.rar
Tender Documents • 1.84 MB
BOQ_1360715.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .