Replacement of sound and video projection system installed in Auditorium building Dr.RPGMC Kangra at Tanda

Amount

Supply, installation, testing and commissioning of Projector 1-chip DLP Laser phosphor, 1920 x 1200 native resolution, min. 13,500 lumens, Contrast Ratio : 700000 : 1, Lamp life 20000 hours, Motorized horizontal and vertical lens offset , 3D ready, Inputs: 3G-SDI x 1 (BNC), HDMI x 2, DVI-D x 1, Display Port x 1 , HD15 x 1, HD base T , Controls: RS232 in/out, RS422 in, Ethernet (10/100), USB, device, should be complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Christie/Barco/NEC

Supply, installation, testing and commissioning of Long Throw Projection Lens Should be able to Project the image form a Distance of 35 meters Screen Size 16 x 12 feet as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Christie/Barco/NEC

Supply, installation, testing and commissioning of 43" Full HD (1920 x 1080p) LED TV as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Christie/ Samsung/ Sony/Panasonic

Makes: Extron / Kramer/AMX/ Key Digital

Supply, installation, testing & commissioning of Wall-Plate Switcher, Scaler & Extender with 1 HDMI and 1 VGA + Audio source to 1 HDBaseT/HDMI output, Auto Switching, 4K/UHD: Up to 70m using CAT5e/6, 1080p: Up to 100m, Compliancy up to HDCP 2.2 and backward compliant, TMDS bandwidth 10.2 Gbps, Video Scaling of VGA signals for proper display, Deep colour support Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit, TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing & commissioning of HDBaseT receiver via Single CAT5e/6 to HDMI. 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit, HDCP 2.2: Compliancy up to HDCP 2 .2 and backward compliant, Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit, EDID and HDCP authentication to Display and Source as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing & commissioning of HDMI Transmitter via Single CAT5e/6 to HDBaseT. 4K/UHD Resolution: Supports signals up to 4096x2160 60Hz [4:2:0] 8bit, 4096x2160 30Hz [4:2:2] 12bit, and 4096x2160 30Hz [4:4:4] 8bit, HDCP 2.2: Compliancy up to HDCP 2 .2 and backward compliant, Deep Color Support: Up to UHD/4K 30Hz 4:2:2/12 bits or 60Hz 4:2:0/8 bit, EDID and HDCP authentication to Display and Source as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing & commissioning of Simultaneous wired and wireless presentation and collaboration device. With any laptop or mobile device, meeting participants can display or stream full uninterrupted HD video (up to 1080p60), images and documents, or share any size file.Should have whiteboard feature which lets you annotate, sketch out ideas or edit shared documents on the main display from your device. Mirroring for iOS (MacBook, iPad and iPhone), Lollipop OS 5.0 or newer (Android), and Chromebook. You can show up to four user screens on a single main display as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing and commissioning of 600mbps Wireless router and access point as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing and commissioning of 1 Mtr. HDMI cable as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing and commissioning of 5 Mtr. HDMI cable as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing and commissioning of 5 Mtr. Audio cable as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing and commissioning of 5 Mtr. VGA cable as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Extron/ Kramer/AMX/ Key Digital

Supply, installation, testing and commissioning of CAT 6 UTP cable as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: R&M/ Molex/ Systimax

Supply and erection of PVC conduit pipe 25 mm dia ISI marked (Medium) recessed in wall/ceiling etc. including cost of PVC bends, inspection box and all other material as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Diplast/Polyplast/Polycab.

SOUND SYSTEM

Supply, installation, testing and commisioning of flying Dual 15" arrayble subwoofer with same footprints as Main Speaker for Arraying in the same frame, having a Freq. Range (-10 dB) of 30 Hz - 3100Hz & Freq. Response1 (-3 dB): 40 Hz - 2.5 kHz or better. It should have an axial Sensitivity of >100dB (1W/1m) or more delivering a Max. Calculated SPL of >=137 dB.The loudspeaker should have a nominal impedence :4ohm and continuous Power Handling of 950W or more & a minimum of 25 M10 suspension points as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, installation, testing and commisioning of flying, Line arrayble Full Size 15", 2 Way Horn loded, bi-ampable speaker . The speaker cabinet must have HF Transducer of 2 in diaphragm compression driver, frequency range of 50 Hz – 16 kHz; Frequency Response (-3 dB): 60 Hz – 15 kHz, Axial Sensitivity >= 106 dB (1W/1m), delviering Max. Calculated SPL >= 139 dB with continuous passive power handling 500W or more. The speaker should have a nominal impedance of 8 ohm .The speaker cabinet should have a Rotatable Coverage: 60° x 35° or better for better far and near field experiance.Speaker must have 28 or more suspension points for permanenet installation as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, installation, testing and commisioning of flying, Line arrayble Full Size 15", 2 Way, bi-ampable speaker . The speaker cabinet must have HF Transducer of 2 in diaphragm compression driver, frequency range of 50 Hz – 19 kHz; Frequency Response (-3 dB): 60 Hz – 16 kHz, Axial Sensitivity >= 97 dB (1W/1m), delviering Max. Calculated SPL >= 131 dB with continuous passive power handling 500W or more. The speaker should have a nominal impedance of 8 ohm .The speaker cabinet should have a Rotatable Coverage: 90° x 55° or better for better far and near field experiance.Speaker must have 20 or more suspension points for permanenet installation as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, installation, testing and commisioning of OEM supplied Black Vertical Rigging Kit for arrayable speakers as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, installation, testing and commisioning of OEM supplied Black Vertical Rigging Kit for arrayable subwoofers as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, Installation, testing and commissioning of Box type low profile High SPL Fill Loudspeaker with Compact Low profile with LF drivers as 2 x 8-inch woofers and ;HF drivers as 1 x 1.3 inch midband high-frequency compression driver; frequency range of 80 Hz - 16 kHz, Nominal coverage pattern of 90°x 50° with rotatable high frequency horn, Power handling of 350W @ 8 Ohm, Sensitivity of 94 dB SPL, Max SPL of 125 dB SPL, with U-bracket for Pitch adjustment as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, Installation, testing and commissioning of 12" Two-way Powered Speaker with one 1" HF transducer with a Frequency Response(-3dB):- 65Hz-18KHz & In built class D Power amplifier of 1000 W or better. The Loudspeaker should have a Max. SPL of >=125dB.The Sound Dispersion should be 90x60 Degress. The speaker should have both built in line level inputs & multiple DSP functions as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, Installation, testing and commissioning of 4 channel class D Power amplifier with Max Output Power of 4x2500W@4 ohms, or bridged mode output power of 4x 5000W @ 4 ohms. 20Hz - 20 KHz, SNR of 112dB and THD + N of <0.05% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer Network audio connectivity (Dante or CobraNet),network audio inputs 8 channels or more & network outputs 2 channel or with higher specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Martin Audio, Bose, Bosch- EV/ D&B Audiotechnik, Celto Acoustique

Supply, Installation, testing and commissioning of 4 channel class D Power amplifier with Max Output Power of 4x1250W@8 ohms, or bridged mode output power of 4x 2600W @ 4 ohms. 20Hz - 20 KHz, SNR of 112dB and THD + N of <0.05% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer Network audio connectivity (Dante or CobraNet),network audio inputs 8 channels or more & network outputs 2 channel or with higher specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Martin Audio, Bose, Bosch- EV/ D&B Audiotechnik, Celto Acoustique

Supply, Installation, testing and commissioning of 5.25" two-Way Speaker with a Frequency Range(-10dB):- 62Hz-20Khz & Long Term Power Handling of>=75W (at Nominal Impedance of 8ohms). The Loudspeaker should have a Sensitivity(1W/1m) of 90dB with a Max. SPL of >=115dB. It should have Built in LMT with Power Taps of 7.5/15/30W at70/100V Line. The Sound Dispersion should be 90x90 Degrees or better. The Speaker Should Come with OEM wall Mounting Bracket with a horizontal Sweep Range of upto 90Degrees & vertical 90degrees as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B Auditechnik /Martin audio/Adamsons/ EV/Celto Acoustique

Supply, installation, testing and commisioning of Single Channel amplifier providing 70V/100V Rated Output Power (*Rated Load); THD<1%, 1kHz; 270W ;Rated Output Power (*Rated Load) ;THD<0.2%, 20Hz…20kHz ; 250W Slew Rate at 1kHz 41V/μs ;Frequency Response, (-1dB,). 1kHz 70Hz - 20kHz; Power Bandwidth THD=1%,Half Power : 45Hz - >20kHz;Input Impedance, 20Hz ... 20kHz, Balanced; > 20kOhm; Signal-to-Noise Ratio, A-Weighted > 101 dB as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: D&B/ audio technik/ MC Square / EV/Celto Acoustique

Supply, installation, testing and commisioning of 22 channel Compact Mixing System (18 x Mic/Line + 4 x Mic/Stereo-Line), Auxiliarys (MON, FX, AUX) : 2 Pre, 2 Post, 2 Pre/Post switchable, Frequency Response, -3 dB, ref. 1 kHz : 15 Hz to 65 kHz, Crosstalk, 1 kHz Channel to Channel < -80 dB, THD at 1 kHz < 0.005%, CMRR MIC input 1 kHz > 80 dB, Dual stereo 24/48-bit multi effects processors, 100 Factory + 20 User, Tap-Delay, Digital Audio Interface Channels : 4 In / 4 Out, AD/DA Conversion, Sampling Rate : 24-bit, 44.1 / 48 / 88.2 / 96 kHz as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: AVID/Midas/ Yamaha MG20XU/ SondcraftFX16MKii

Supply, installation, testing and commisioning of Dynamic Supercardioid Vocal Microphone with Freq. Response : 35 Hz - 21,000 Hz, Sensitivity : 3 mV/pascal, Dynamic Range:144 dB, Impedance: 350 ohms as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing and commisioning of Dynamic Supercardioid Instrumental Microphone with Freq. Response : 30 Hz - 21,000 Hz, Sensitivity : 3 mV/pascal, Dynamic Range:144 dB, Impedance: 350 ohms as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing and commisioning of Handheld Wireless Mic with Cardiod polar pattern for transmitter, Dynamic microphone with Neodymium magnet, Receiver frequency response 80Hz-18kHz,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 3.2 mV/Pa,modulation:+/-40kHz. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing and commisioning of Wireless Lapel Mic with Cardiod polar pattern for transmitter , Receiver & Transmitter frequency response 100Hz-18kHz or better,Receiver RF sensitivity < 1.0 µV,Receiver Image rejection>55dB,Receiver Dyanmic range >95dB and receiver having 32 channels possible,Receiver S/N ratio >100dB A,distortion <1 %, Transmitter sensitivity - 5.6 mV/Pa,modulation:+/-40kHz as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing & commissioning of UHF Antena Spliiter Provides antennas and power for 4 diversity receivers,Internal switching power supply,Green LED On Indicator on front panel,Can be cascaded with more splitters to supply more receivers,Frequency range- 780 - 900 MHz,3rd Order Intercept:Greater than 18 dBm,Net Gain:Greater than 2 dB,Noise Figure:Less than 3 dB,Output Isolation:Greater than 20 dB,Connectors - Antennas:Standard TNC,Antenna Input Power:Optional 12 V DC,Power Requirements100 - 240VAC 50/60 Hz etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing & commissioning of UHF transmitting and receiving omnidirectional antenna with interal or external booster amplifer,oem cables for connecting antenna to antenna splitter. Compatible with the Antenna Distribution complete with mounting kit etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing & commissioning of 75' 50 ohm low loss coaxial cable, TNC M connector as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing & commissioning of UHF Antenna amplifier, 3 or 10db gain as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Clearone /EV/ Audio technica /Sennheiser

Supply, installation, testing & commissioning of 2 Core 2.5 Sq mm Speaker Cable under 30pf per meter capacitance-Specifications for one cable length from amplifier to speaker as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Havells/KEI/Finolex

Supply, installation, testing & commissioning of 2 Core 4 Sq mm Speaker Cable under 30pf per meter capacitance-Specifications for one cable length from amplifier to subwoofer as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Havells/KEI/Finolex

Supply, installation, testing & commissioning of Connector XLR, NL 4 Speakon, RCA to Phono (1/8") Cable, Phono (1/4", Power Sequencer as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Havells/KEI/Finolex

Supply & laying of Snake Wire 8 Channel with all petty materials as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Krystal/Kramer/Extron

Supply, installation, testing & commissioning of Mic Face Plates having 8 Mic input as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Logic/Kramer/Key-Digital

Supply, installation, testing & commissioning of 27U indoor rack with 800X800 high density rack with framework with 2 Horizental and 2 Vertical channel with 4 FAN tray roof cabinet. 1 Top Cover and 1Bottom Cover with gland plate and rubber grommets for cable entry provisions,4 Recess mounting angles, with PVC cable separation cable manager. rack should be certified as required complete in all respects and to the best satisfaction of Engineer-in-charge.

Makes: Valrack/Netrack/Comrack

D.S Ranta Electrical Contractor