Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.3 LAdmitted-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | L1 | Admitted-Finance | |
| 2 | L2₹36.7 L+₹9.4 L (34.6%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹36.8 L+₹9.5 L (34.8%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹37.0 L+₹9.7 L (35.7%)Admitted-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | BIKANER | RAJASTHAN | 334001 | L4 | Admitted-Finance | |
| 5 | L4₹37.0 L+₹9.7 L (35.7%)Admitted-Finance PACHPADRA ROAD OPP MILK DAIRY BALOTRA TEHSIL PACHPADRA DISTT BALOTRA RAJ | GANGANAGAR | RAJASTHAN | 335001 | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Beenu Co. Company L4 | Mahaveer Traders L5 | kgn construction company L2 | Veer Builders L4 | M/S VISHNOI ENTERPRISES L1 | M/S BHERA RAM & SONS L4 | M/S JAI ENTERPRISES L3 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Checking and attending to leakages in bib taps, pillar taps, mixer, stop cocks, angle valves, flushing cistern, GI pipes etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings including replacement of defective material/items and all connected plumbing works etc complete all as specified and directed.
Note :-
(i) Contractor or his supervisor / site Engineer will report daily at 900 hrs at complaint cell for collection of complaints from the concerned JE in Charge in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE then after to Engineer in Charge by the contractor/ his rep immediately. If Engineer-in-Charge is satisfied with contractor view, no recovery will be made on this account. However complaints related to water pipe line blockage/pipe replacement etc whatever is applicable shall be attended on same day whether it is 'Sunday' or 'Gazetted hoidays' and nothing extra shall be payable to contractor on this account.
(ii) Contractor or his supervisor/site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaint register, issue of complaints slip to tradesmen and enter after completion in complaint register.
(iii) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday and Gazetted holiday commencing from date and time of notifying the complaint slip failing which a penality @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/ imposed on the contractor and necessary recovery shall be made from his dues on this account. The contractor at the begining of contract will provide printed 30X complaints slip books as per performa let with 400 leaf each booklet.
(iv) Any item / material which are required to be replaced shall be paid under respective item under this schedule here in after as Supply only
(v) The labour/tradesmen required for replacement of 'Supply only' items are included under this item. However labour charges for items where indicated 'M&L', 'S&F' and 'in repairs' shall be included in respective items.
(vi) The above all aspect shall deemed to be included in the quoted rate of the respective item. | 2,500 | Each complaint | 80 ₹2,00,000 | 960 ₹24,00,000 | 70 ₹1,75,000 | 80 ₹2,00,000 | 50 ₹1,25,000 Lowest | 80 ₹2,00,000 | 70 ₹1,75,000 |
| 2.00 | Checking and attending to welding work in repairs to steel windows, handles,door springs, iron frame of doors, rolling shutter garrages and other iron misc works, repair by welding ( run or spot welding as per site require ment) including replacement of defective items/material alongthwith & including welding machine gloves, welding glass, welding rod any other tools required, as per requirement complete all as specified and directed.
Note :- All as per Item No. 1 (i) to (vi) | 110 | Each complaint | 100 ₹11,000 | 120 ₹13,200 | 100 ₹11,000 | 100 ₹11,000 | 100 ₹11,000 | 100 ₹11,000 | 90 ₹9,900 Lowest |
| 3.00 | Checking and attending to carpenter work in repairs to joinery (wooden/steel/aluminium) including iron/aluminium mongery, pelmet box, door spring, rolling shutters etc requiring carpentery work and carrying out minor repair such as tighting of screws/nails, wire of false ceiling, easening of joinery, door spring etc including replacement of glass panes, wirelcoth to joinery or any defective items/materials complete all as specified and directed.
Note :- All as per Item No. 1 (i) to (vi) | 3,000 | Each complaint | 100 ₹3,00,000 | 120 ₹3,60,000 | 100 ₹3,00,000 | 100 ₹3,00,000 | 50 ₹1,50,000 Lowest | 100 ₹3,00,000 | 90 ₹2,70,000 |
| 4.00 | S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple, beads on any type of door/windows. complete all as specified and directed. | 60 | Sqm | 700 ₹42,000 | 750 ₹45,000 | 700 ₹42,000 | 700 ₹42,000 | 600 ₹36,000 Lowest | 700 ₹42,000 | 600 ₹36,000 Lowest |
| 5.00 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wdn beads in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. complete all as specified and directed. | 45 | Sqm | 700 ₹31,500 | 750 ₹33,750 | 700 ₹31,500 | 700 ₹31,500 | 600 ₹27,000 Lowest | 700 ₹31,500 | 750 ₹33,750 |
| 6.00 | S&F for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. complete all as specified and directed. | 17 | Sqm | 700 ₹11,900 | 750 ₹12,750 | 700 ₹11,900 | 700 ₹11,900 | 600 ₹10,200 Lowest | 700 ₹11,900 | 750 ₹12,750 |
| 7.00 | S&F for 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed | 8 | Sqm | 1,500 ₹12,000 | 150 ₹1,200 Lowest | 1,500 ₹12,000 | 1,500 ₹12,000 | 1,100 ₹8,800 | 1,500 ₹12,000 | 1,300 ₹10,400 |
| 8.00 | S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/ beads in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. complete all as specified and directed. | 15 | Sqm | 800 ₹12,000 | 800 ₹12,000 | 800 ₹12,000 | 800 ₹12,000 | 700 ₹10,500 Lowest | 800 ₹12,000 | 750 ₹11,250 |
| 9.00 | S&F in repairs 40mm dia, cupboard knobs fixed with nut screw and washers of brass polished. complete all as specified and directed. | 50 | Each | 80 ₹4,000 | 80 ₹4,000 | 80 ₹4,000 | 80 ₹4,000 | 80 ₹4,000 | 80 ₹4,000 | 70 ₹3,500 Lowest |
| 10.00 | S&F in repairs brass, 4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing complete all as specified and directed. | 45 | Each | 200 ₹9,000 | 200 ₹9,000 | 200 ₹9,000 | 200 ₹9,000 | 150 ₹6,750 Lowest | 200 ₹9,000 | 190 ₹8,550 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
4 Aug 2026, 6:00 pmClosed
GE AF PHALODI
GE(AF) Phalodi PIN-342301
COMPREHENSIVE DAY TO DAY MAINTENANCE OF B/R AND E/M WORKS IN DOMESTIC AREA AT AF STN PHALODI
2026_MES_778499_1
8783/A/E8
Open Tender
Civil Works
Item Rate
240 days
Air Force Station Phalodi
As per tender docs
7 documents required · 7 mandatory
₹500
GE(AF) Phalodi
₹50,000
Yes
17 Aug 2026
14 Jul 2026
6 Aug 2026
14 Jul 2026
4 Aug 2026
28 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Checking and attending to leakages in bib taps, pillar taps, mixer, stop cocks, angle valves, flushing cistern, GI pipes etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings including replacement of defective material/items and all connected plumbing works etc complete all as specified and directed.
Note :-
(i) Contractor or his supervisor / site Engineer will report daily at 900 hrs at complaint cell for collection of complaints from the concerned JE in Charge in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE then after to Engineer in Charge by the contractor/ his rep immediately. If Engineer-in-Charge is satisfied with contractor view, no recovery will be made on this account. However complaints related to water pipe line blockage/pipe replacement etc whatever is applicable shall be attended on same day whether it is 'Sunday' or 'Gazetted hoidays' and nothing extra shall be payable to contractor on this account.
(ii) Contractor or his supervisor/site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaint register, issue of complaints slip to tradesmen and enter after completion in complaint register.
(iii) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday and Gazetted holiday commencing from date and time of notifying the complaint slip failing which a penality @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/ imposed on the contractor and necessary recovery shall be made from his dues on this account. The contractor at the begining of contract will provide printed 30X complaints slip books as per performa let with 400 leaf each booklet.
(iv) Any item / material which are required to be replaced shall be paid under respective item under this schedule here in after as Supply only
(v) The labour/tradesmen required for replacement of 'Supply only' items are included under this item. However labour charges for items where indicated 'M&L', 'S&F' and 'in repairs' shall be included in respective items.
(vi) The above all aspect shall deemed to be included in the quoted rate of the respective item. | 2,500 | Each complaint | - | - |
| 2 | Checking and attending to welding work in repairs to steel windows, handles,door springs, iron frame of doors, rolling shutter garrages and other iron misc works, repair by welding ( run or spot welding as per site require ment) including replacement of defective items/material alongthwith & including welding machine gloves, welding glass, welding rod any other tools required, as per requirement complete all as specified and directed.
Note :- All as per Item No. 1 (i) to (vi) | 110 | Each complaint | - | - |
| 3 | Checking and attending to carpenter work in repairs to joinery (wooden/steel/aluminium) including iron/aluminium mongery, pelmet box, door spring, rolling shutters etc requiring carpentery work and carrying out minor repair such as tighting of screws/nails, wire of false ceiling, easening of joinery, door spring etc including replacement of glass panes, wirelcoth to joinery or any defective items/materials complete all as specified and directed.
Note :- All as per Item No. 1 (i) to (vi) | 3,000 | Each complaint | - | - |
| 4 | S&F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple, beads on any type of door/windows. complete all as specified and directed. | 60 | Sqm | - | - |
| 5 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty/wdn beads in square n.exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. complete all as specified and directed. | 45 | Sqm | - | - |
| 6 | S&F for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. complete all as specified and directed. | 17 | Sqm | - | - |
| 7 | S&F for 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed | 8 | Sqm | - | - |
| 8 | S&F Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/ beads in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from any type of frames. complete all as specified and directed. | 15 | Sqm | - | - |
| 9 | S&F in repairs 40mm dia, cupboard knobs fixed with nut screw and washers of brass polished. complete all as specified and directed. | 50 | Each | - | - |
| 10 | S&F in repairs brass, 4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing complete all as specified and directed. | 45 | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.52 MB
tender.pdf
Tender Documents • 1.09 MB
BOQ_871932.xls
BOQ • 1.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .