Designing, Engineering, Fabrication (with material), Supply, Erection and Commissioning of Telescopic Spout at Ash Silo under AHP-MM Department, STPS.

DESIGN, ENGINEERING, FABRICATION OF TELESCOPIC SPOUT (WITH MATERIAL), SUPPLY, ERECTION & COMMISSIONING OF TELESCOPIC LOADING SPOUT FOR CLOSED TRUCK LOADING WITH INBUILT BAG FILTER & CONE AS PER GA DRAWING & THE ABOVE SPECIFICATION IS2062 CONSTRUCTION WTTH HARDOX MATERIAL LNING ONLY LOADING CAPACITY 160 TPH INCORPORATED WITHOUT INTEGRAL FILTER FOR DUST THE JOB INCLUDES OLD EXISTING SYSTEM REMOVAL & CLEANING. IF ANY MODIFICATION IS REQUIRED, IT SHOULD BE DONE ALSO. 1. TYPE SINGLE BELLOW WITH INTERNAL STEEL CONES ALONG WITH SS CLAMP RETRACTED HEIGHT 800 MM (APPROX.), VERTICAL TRAVEL 1600 MM(APPROX.) A. INLET DIA 300MM B. MATERIAL TO BE HANDLED FLY ASH 2. PUSH BUTTON STATION IS PROVIDED FOR MANUAL OPERATION FOR THE SPOUT HAVING IP- 65 PROTECTION AND COMPRISING THE FOLLOWINGS: PUSH BUTTON # START, PUSH BUTTON # STOP. PUSH BUTTON # RAISING PUSH BUTTON # LOWERING ALONG WITH OTHER REQUIRED ACCESSORIES, 3. COMBINED CONTROL PANEL FOR ABOVE BULK LOADING SPOUT SHALL BE PROVIDED HAVING IP-55 PROTECTION WILH WALL MOUNTING ARRANGEMENT AND FOLLOWING FEATURES: INDICATION LAMP FOR SUPPLY ON INDICATION LAMP FOR SYSTEM HEALTHY 4. DUST EXTRACTION INBUILT DUST COLLECTOR WITH FILTER BAG OF TOTAL 12 SQ. MT. TO HANDLE DIRTY AIR 1400M3/HR. AUTOMATIC PULSE CLEANNING DEVICE. 5. BLOWER FAN 1440M3/HR, 150 MM WC # ALONG WITH 2HP MOTOR 6. BASE MOUNTED ELECTRIC WIRE HOIST WINCH, 1.0 TON X 2.6 MTR. ALTERNATIVELY, 1.5 TON X 2.6 MTR., SPEED: 2.0 M/MIN, COMPLETE WITH GEAR BOX, MOTOR, BRAKE, CONTROL PANEL, LIMIT SWITCH, 2NOS.140 DIA. PULLEY ASSEMBLY WITH BRACKET AND 2 NOS. 8 MM. DIA WIRE ROPE WITH EYE BOLTS. 7. COMPLETE ORIFICE FEEDER – 01 NO. 8.REQUIERD ALL MS PLATES, ISMC, PIPES, NUTS, BOLTS, WASHERS, NIPPLES, FORGE STEEL GATE VALVES, UNION, SOCKETS & OTHERS WILL BE SUPPLIED BY VENDOR. 9. SUPPLY OF ALL OTHERS ELECTRICAL/C&I ACCESSORIES TO BE SUPPLIED BY THE VENDOR.