Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC HIMACHAL PRADESH HP | ₹1.2 L Quoted ₹1.4 L | L1 | Accepted-AOC Award |
| 2 | L2₹1.5 LRejected-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | ₹1.5 L | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹1.6 LRejected-Finance HIMACHAL PRADESH HP | ₹1.6 L | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | GULZARI LAL L3 | Raj Kumar Prop R.K. Construction L1 | Rajesh Kumar L2 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge. | 39.99 | Cum | 500 ₹19,995 | 450 ₹17,995.50 | 475 ₹18,995.25 |
| 2.00 | Repair and maintenance of Rising Main by cutting and welding of GI pipe diameter mentioned below ie. By buttwelding and Gas welding two layers including cost of cutting of GI pipe and carriage of welding set and DG set by Machanical transport and head lead up & down complete job in all respect and to entire satsfection of Engineer -in-Charge in all leads and lifts. 80 mm dia. | 44 | Joints | 600 ₹26,400 | 540 ₹23,760 | 550 ₹24,200 |
| 2.01 | 65mm diameter | 35 | Joints | 550 ₹19,250 | 480 ₹16,800 | 500 ₹17,500 |
| 3.00 | Providing manufecturing laying and jointing of GI Bends of diameters mentioned below (Heavy duty) of required degree confirming to relevent IS specification with up to date amendments having wall thickness mentioned below. The joint shall be jointed with circumfrancial butt welding joints by electrical welding in requsite number of weld run so as to achive the minimum effective thorat thickness and strenth of weld confirming to IS-816-1969 spacification, by using welding electorods of 2.50 mm to 6.30 mm of advani oerlication (Ador) /CITOJET/Esab make , confirming to 814-1991 , at site of work complete job in respect and to the entire satisfaction of Engineer-in-Charge in all leads and lifts.80 mm dia | 11 | Bends | 2,400 ₹26,400 | 2,270 ₹24,970 | 2,350 ₹25,850 |
| 3.01 | 65mm diameter (HC) | 9 | Bends | 2,000 ₹18,000 | 1,845 ₹16,605 | 1,900 ₹17,100 |
| 4.00 | Providing and fixing Cast Iron Non Return Valve of BIR/ KARTAR/ PELICON make BIS No. 5312 with flange Table -17 with Gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect. The sluice valve conforming to IS- 780 having class PN- 1.00. The dia of valve as mentioned below complete in all leads and to the entire satisfaction of the Engineer-in-charge .80mm diameter | 2 | Nos | 11,900 ₹23,800 | 11,500 ₹23,000 | 11,600 ₹23,200 |
| 4.01 | 65mm diameter | 2 | Nos | 12,000 ₹24,000 | 9,000 ₹18,000 | 10,000 ₹20,000 |
Tender Value
₹1.6 L
EMD Value
₹3,300
Closing Date
24 Oct 2025, 5:00 pmClosed
Executive Engineer
EE JSV Mandi
Repair and Maintenance of Gravity main 80 and 65mm at various RDs by cutting welding and testing of old GI pipe and bend of old GI pipe and providing and fixing of cast iron sluice valve of 80mm and 65mm dia under Jal Shakti Section Talyahar
2025_HPIPH_117896_1
10829-928
Open Tender
Miscellaneous Works
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹3,300
18 May 2026
15 Oct 2025
25 Oct 2025
15 Oct 2025
24 Oct 2025
15 Oct 2025
Amount
Excavation in foundation and trenches etc. (including pipes and pits upto all depths) in all kinds of soil such as pick work, jumper work, blasting and chiselling soft or hard rock where blasting is prohibited in all leads and lifts including trimming and dressing of sides, levelling of bed to correct grade stacking the excavated soil clear from the edge of excavation and returning the excavated soil after laying, jointing and testing of GI pipes in trenches in 15cm layers including consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting and trimming dressing where ever required including restoration of un-metalled surface to its original condition including cost of diversion for traffic night signals fixing caution board, crossing over trenches for access to houses and fencing etc. complete in all respects with in all leads & lifts as per directions of Engineer-in-Charge.
Repair and maintenance of Rising Main by cutting and welding of GI pipe diameter mentioned below ie. By buttwelding and Gas welding two layers including cost of cutting of GI pipe and carriage of welding set and DG set by Machanical transport and head lead up & down complete job in all respect and to entire satsfection of Engineer -in-Charge in all leads and lifts. 80 mm dia.
65mm diameter
Providing manufecturing laying and jointing of GI Bends of diameters mentioned below (Heavy duty) of required degree confirming to relevent IS specification with up to date amendments having wall thickness mentioned below. The joint shall be jointed with circumfrancial butt welding joints by electrical welding in requsite number of weld run so as to achive the minimum effective thorat thickness and strenth of weld confirming to IS-816-1969 spacification, by using welding electorods of 2.50 mm to 6.30 mm of advani oerlication (Ador) /CITOJET/Esab make , confirming to 814-1991 , at site of work complete job in respect and to the entire satisfaction of Engineer-in-Charge in all leads and lifts.80 mm dia
65mm diameter (HC)
Providing and fixing Cast Iron Non Return Valve of BIR/ KARTAR/ PELICON make BIS No. 5312 with flange Table -17 with Gasket including complete process of opening of existing valve and fixing new valve by all means complete job in all respect. The sluice valve conforming to IS- 780 having class PN- 1.00. The dia of valve as mentioned below complete in all leads and to the entire satisfaction of the Engineer-in-charge .80mm diameter
65mm diameter
Rajesh Kumar (BID ID -573642)
GULZARI LAL (BID ID -573646)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
Form6.pdf
Tender Documents • 0.55 MB
Form8.pdf
Tender Documents • 1.05 MB
BOQ_172444.xls
BOQ • 0.49 MB
Download all tender documents and submit your bid