Providing LIS Panjanu Chhandiyara in GP Pangana Tehsil Karsog Distt mandi

Amount

Excavation in foundations trenches etc. in all kind of soil in all leads and lifts such as pick work, jumper work in saturated /un saturated soil including bailing out water, blasting work in hard/soft rock or chiseling in hard/soft rock where blasting is prohibited in all leads and lifts stacking the excavated earth more than 3mtr.clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and disposing of all surplus excavated earth as directed within all leads and lifts and handing over the usable materials available from excavation to department free of cost as per direction of Engineer-in-Charge with in all leads and lifts.

Providing and laying cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size) and curing complete excluding in cost of form work in:- i) Foundation and Plinth.within all leads and lifts.

(Providing and laying cement concrete 1:1½:3 ( 1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:- (i) Foundation and Plinth.within all leads and lifts.

(ii) Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. within all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring shuttering ,strutting and propping etc.with wooden battens and ballies,height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ reinforced concrete and plain concrete workin:- vertical wall (any thickness) partation and like i/c attached plaster butresses plinth & spring in all leads and lifts all respect as per direction and to entire satisfation of Engineer - in - charge .

Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. within all leads and lifts.

L/J HDPE pipe 110 mm dia with all lead and lift .

P/F C.I. Alfa Valve 140mm Dia within all leads and lifts.

Laying & Jointing and Testing of GI pipe (MG) tube fittings only earth work in trenches to be measured and paid for saperately 150mm dia with in all leads and lifts.

Laying , jointing and testing of HDPE pipe in trenches to a required grade as per (IS4984-1995 latest with upto date ammendmentsof following OD pipes, materials grade and class of pipe. The joints of pipe shall be done by the way of butt fusion welding as per relevant IS code & specifications including fittings & accessories e.g. coupling TEE's, bends, reducer, screwed adopters, flanges tail piece etc. as per direction of the Engineer-in-charge (LR)within all leads and lifts.90mm PE-80 PN-4

110mm PE-80 PN-4

NAND LAL GOVT CONT

MANMOHAN GUPTA GOVT CONTRECTOR

Jagdish Kumar

DAYAL SINGH GOVT CONT

MOHAMMAD SALMAN

Naresh kumar

devender kumar

PANKAJ SHARMA