Construction of Inspection Hut at Gada Gussain in GP Thachadhar Tehsil Balichowki Distt Mandi HP.

Amount

Demolition above G.L. upto floor two level i/c disposal of unserviciable materials with in 20 metres lead and i/c cutting the necessary reinforcement and separating out from RCC works.

Demolition of Brick work above GL upto floor two level including stacking of serviciable materials and disposal of unserviceable materials with in all leads and lifts in cement mortor.

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-charge.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts.

Random rubble masonry/polygonal rubble masonry (uncoursed brought in to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggragate 20mm nominal size) at plinth level in cement mortar 1:6 (1cement : 6 sand).

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including racking out joints in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:-

Foundation footing bases of columns etc and mass concrete.

Columns, pillars, post and struts: - Square, rectangular or polygonal in plan.

Beam, cantilever, girders and lintels.: - Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like: - Floors etc. up to 200mm in thickness.

Edges of slab and breaks in floors and walls under 20 cm wide.

Stair cases with sloping or stepped soffits excluding landings.

Providing & Laying cement concrete work 1:11/2: 3 (1 cement : 11/2 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:-

Foundation, footings base of columns and the like mass concrete in all leads and lifts.

Colunms pillars posts and struts upto floor two level.

Lintels, beams girders bressumers and cantilevers upto floor two level.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and curing complete excluding the cost of form work and reinforcement in:-

Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level.

Stair cases (Except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.

Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level. Tor Steel

Supplying and fixing of cast iron manhole cover with frame 455 x 610 mm rectangular C.I. cover (light duty) single seal pattern the weight of cover 23 Kg. and weight of frame 15 Kg. The total weight of cover and frame to be not less than 38 Kg. compelete.

Steel work welded in built up sections, trusses and framed work including cutting hoisting Fixing in position and applying a priming coat of red lead paint :-In trusses and trussed purlings in buildings.

Providing & Fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coatig including Fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge.

Providing and Fixing 15 cm wide 45 cm over all semicircular with iron plain G.I. sheet gutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary connection with rain water pipe complete as per design. 0.80 mm thick sheet.

Brick work using common burunt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1 cement : 6 sand) (Ist class brick)

Half bricks masonry in common burnt clay building bricks in cement mortar 1:4 (1cement : 4 sand) (Ist class brick)

Providing wood work in frames of door, windows, clerestory windows and other frames wrought , framed and fixed in position (Ist class Saal Wood).

Boulder/stone Soiling under floor in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth. In all leads and lifts.

6mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand)

15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement: 6 sand) within all leads and lifts.

Rough side exterior cement plaster on wall upto a height of 10 metres above ground level with a mixture of sand & gravel or crushed stone graded from 6 mm to 12 mm nominal size dashed over and including fresh plaster in two coats, backing coat 10 mm cement plaster 1:3 (1cement : 3 sand) and finishing coat 10 mm cement plaster with cement mortor 1:3 (1cement : 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement including arrises, chamfers and/or rounded angles not exceeding 80 mm in girth.Natural cement finish using ordinary cement. In all leads and lifts.

Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortor 1:3 (1cement : 3sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete. 20 mm thick. In all leads and lifts.

Providing and laying Duro stone vetrified tiles 300x300x10mm in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortor 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and laying vetrified double charge tiles 600x1200x10mm in grey/coloured or of approved shade in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortor 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and Fixing antiskid water proof stain and impact resistent heavy duty vetrified tiles Nitco or equivelent (300 X 300 X 10 mm) manufactured of approved shade and colour treads of steps laid on a bed of 12 mm thick cement mortor 1:3 (1cement : 3 sand) finished with flush pointing in white cement mixed with pigment ofrequired shade to match the shade of tiles complete.

Coloured glazed tiles 6 mm thick (300x450 mm) in skirting risers of steps and dedo12 mm thick cement mortar 1:3 (1 cement : 3 sand) and jointed with cement slurry in all leads and lifts.

Providing and Fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. (Ist class saal wood) In all leads and lifts.

Providing and Fixing wire gauge shutters using galvenised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors, windows & clearstory windows i/c bright finished black iron enamelled hinges with necessary screws 40 mm thick (Ist class saal wood)

Providing & Fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws (ornamental grills).

Providing, Manufacturing, Supplying & Fixing of Fencing Panel of size. 1.20 m X 1.20 m of Jali (Expended metal) 25 X 25 mm mesh welded to M.S.black tube 32 mm dia of 14 gauge with M.S. flat cover 20 X 5 mm including cutting, welding, painting with red oxide paint followed by a cost of metal enamal paint to exterior glistering look and redring smooth complete in all respect and as per direction on Engineer-in-Charge.

Providing 40x3 mm iron hold fast 40 cm long including fixing to frame with 10 cm da bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size).

Manufacturing, Supplying and Fixing of Cup Board made with High Density High Moisture Resistance (Bhutan/Green Make). Hard Wood used for higher density of product Special Glue being used to make it Water Resistant Product as per Indian climate Water Resistance Characteristics as per ISI Standard Ideal Routable Substrate with Sharp Cut & Routed Edge Ready & Smooth Surface which absorbs less paint in painting process thus saves paint cost also Easy Workibility Cost Effective Paneling Solution HDHMR board 18 mm thick (BSL) and Sunmica board for shutters 1 mm thick including stainless steel piano hinges. with stainless steel screws, catches, stainless steel ventilating jali, nails, fevicol and tower bolts 100 mm complete with locking arrangement. All boards shall be of ISI make and work shall be done to the entire satisfaction of the Engineer-in-Charge in all leads and lifts.

Providing and fixing bright finished brass sliding door bolts with bolts and nuts screws etc. complete.

Providing and fixing bright finished brass tower bolts ( barel type) with screws etc. complete.

Providing and fixing bright finished brass handles with necessary screws etc. complete.

Providing and Fixing bright finishaed hard drawn Hooks and Eyes 250 mm .

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete .

Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete / masonry / plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface.

Applying one coat for wood preservetive on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter,sand papering and knotting.

Applying priming coat over new wood and wood based surfaces after and inciuding preparing the suface be thoroughly cleaning oil grease dirt and othr foreign sand papering and knotting Readymixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaningthe surface of dirt, dust and other foreign matters sand papering and stopping with enamel paint other than white.

Providing & Fixing Stainless Steel Railing of 304 grade (ISI) of approved brand complate in all respect in all leads and lifts.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20 mm nominal size.

Proving under layer for plinth protection of 75 mm thick (unconsolidated) bed dry brick/stoneAggregated 40 mm nominal size will rammed with rammed and consolidated and grouted with fine sand including preparation of ground.

Constructing course rubble hammer dessed "U" shape open surface drain with side wall 15x22 cm in cement mortor 1:6 (1cement : 6 sand) and inside plastering with cement plaster 1:3 (1cement : 3 sand) including earth work and laayng 10 cm cement concrete in 1:5:10 (1 cement :5 sand : 10 graded stone aggregate 40 mm nonminal size) and 7.5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25 mm thick average thickness of cement mortor 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing and polishing complete (Sub base concrete floor to be paid for 60 mm thick inter locking blocks).

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.(Group C).

Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in PVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.

2 x 1.5 Sq. mm.

2 x 4.00 Sq. mm.

2 x 6.00 Sq. mm.

Supplying & fixing wooden boxes of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required:-

102 mm.x 102 mm.x 60 mm. deep

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.

Telephone socket outlet, piano type.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required.

Single pole & neutral. Cat-B.

Supplying and fixing following rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.

63 Amps. Cat - A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-16 way

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required.

25 Liter capacity water heater (Cat-A)

10 Liter capacity water heater (Cat-A)

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:-

Ceiling Fan 1200 mm sweep, Category - A

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and Fixing of Syska make LED Tube Fixture 18 watt complete in all respect in all leads and lifts.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Fixed type wall bracket

Fixed type wall bracket 150 dia, single lamp.(Category-A)

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Mirror light

Mirror light 460 mm, single lamp.(Category-A)

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Bed side bracket, single swivel (Premium) with shade (Category-A)

Supplying and fixing of bulk head fitting of all sizes and shapes, containing one No. thread type CFL lamp holder (s), complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Bulk head fitting, CFL type (Category-A)

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Supplying and laying 8 SWG Copper wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Supplying and fixing of integral CFL Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Gate post top lantern - CFL 26 watt.

Providing and Fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.

75 mm dia high pressure

110 mm dia high pressure

Providing and Fixing PVC plain bend ISI marked including fixing with approved etc. complete.

75 mm dia PVC plain bend ISI marked

110 mm dia PVC plain bend ISI marked

Providing and Fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved etc. complete.

75 mm dia PVC door bend

110 mm dia PVC door bend

Providing and Fixing PVC collars ISI marked including fixing with approved etc. complete.

75 mm dia PVC collars

110 mm dia PVC collars

Providing and Fixing PVC singal equal branch plain ISI marked including fixing with approved etc. complete.

75 mm dia PVC singal equal branch

110 mm dia PVC singal equal branch

Providing and Fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved etc. complete.

75 mm dia PVC single equal branch

110 mm dia PVC single equal branch

Providing and Fixing PVC floor trap ISI marked of self cleaning design including fixing with approved, cost of cutting and making good the wall and floors etc. complete.

110 mm x 90 mm.

Providing and Fixing vitreous China wash, down water closet (EuropeanType WC pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 3 sand) ( seat and cover to be measured and paid for seperately) : Angle Indian (Universal Closet)

Single piece WC for other toilet CERA make CRUSE.

Providing and Fixing vitreous China wash, down water closet (EuropeanType WC pan) with integral "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 3 sand) ( seat and cover to be measured and paid for seperately) : Angle Indian (Universal Closet)

Providing and Fixing white solid type plastic sheet and cover for wash down water closet with CP brass hinges and rubber buffers.

Providing and Fixing 10.00 liters viterious China low level flushing cistern with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15 mm nominal size brass ball valve with polythene float, C.P. Brass handle, Unions and couplings for connections with inlet, outlet and couplings for connections with inlet, outlet and over flow pipes, 40 mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately).

Providing & Fixing viterious china wash basin with single hole for pillar tap with C.I. or M.S. bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white Flat back 630 mm x 450 mm.

Providing and fixing viterious china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (Viterious China in White Colour)

Providing and Fixing M.I. Union for wash basin or sink 32 mm dia.

Providing and Fixing C.P. brass waste and plug for glazed ware sinks, basins etc. with long screwed shank and fly nut and fixed to steel pipe including vulcanite plug, brass chain and stud 32 mm nominal bore.

Providing and Fixing 600 mm x 450 mm bevelled edge mirror of superior glass marked on 6mm thick AC sheet or plywood sheet and fixed to wooden plug with CP brass screws and washer.

Providing and Fixing CP Brass towel rail complete with CP Brass brackets fixed to wooden plug with CP Brass screws 600 mm x 20 mm.

Providing and Fixing 600 mm x 120 mm glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P. Brass screws.

Providing and Fixing Toilet paper holder C.P. brass.

Providing and Fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.

Providing and Fixing Tooth brush and Tumbler holder (Viterious China)

Providing and Fixing C.P. Brass Shower Rose with 15 mm to 20 mm inlet 100 mm dia. In all leads and lift

Providing and Fixing brass bib tap (Superior or heavy type) 15 mm dia long nose.

Providing and Fixing brass bib tap (Superior or heavy type) 15 mm dia short body.

Providing and Fixing C.P. brass angle valve 15 mm without Nuts and pipe.

Providing and Fixing C.P. concealed stop cock 15 mm without Nuts and pipe.

Providing and Fixing one hole basin mixing Faucet.

Providing and Fixing P.V.C. connection with brass unions 300 / 450 mm length 15 mm nominal bore.

Providing and Fixing 100 mm dia chromium plated grating of superior quality for floor, gully or Nahni trap.

Providing and Fixing PTMT Jet spray of approved quality and colour with one meter tube.

Providing and Fixing of C.P. Towel ring of superior quality.

Providing and Fixing of C.P. towel rack 600 mm x 250 mm of superior quality.

Providing and Fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M. S. brackets painted white including cutting holes and making good the same but excluding fitting 610 x 460 mm with bowl depth 200 mm.

Providing and Fixing to wall ceiling and floor galvenised mild steel tubes (light grade) tube fittings and clamps including making good the wall, ceiling and floor in all leads and lifts.

25 mm nominal bore

Providing and Fixing brass full way valve with wheel of 25 mm dia (Heavy Duty) complete in all respect in all leads and lifts.

Providing and Fixing to wall ceiling and floor KITEC Composite PR Pipes (as per IS 15450:2004) (The pipes are having inner layer in natural colour & outer layer in black colour) and clamps including making good the wall, ceiling and floor complete in all respect in all leads and lifts.

15 mm nominal bore

20 mm nominal bore

Providing and Fixing KITEC Coupler composite crimp fittings-internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

15 mm dia KITEC Coupler

20 mm dia KITEC Coupler

Providing and Fixing KITEC Elbow composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

15 mm dia KITEC Elbow

20 mm dia KITEC Elbow

Providing and Fixing KITEC Equal Tee Pcomposite crimp fiitings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

15 mm dia KITEC Equal Tee Pcomposite

20 mm dia KITEC Equal Tee Pcomposite

Providing and Fixing KITEC Reducing Tee composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

20x15 mm dia

Providing and Fixing KITEC Reducer composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

25x15 mm dia

Providing and Fixing KITEC female threaded connector composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

15 mm dia KITEC female threaded connector

20 mm dia KITEC female threaded connector

Providing and Fixing KITEC Male threaded connector composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

15 mm dia KITEC Male threaded connector

20 mm dia KITEC Male threaded connector

Providing and Fixing KITEC Female Elbow composite crimp fittings internal sealing of size mentioned below (Heavy Duty) complete in all respect in all leads and lifts.

15 mm dia KITEC Female Elbow

20 mm dia KITEC Female Elbow

Providing and fixing KITEC pipe Holding Clamps with brass plate of approved design with steel screws and rawal plugs etc. complete.

Providing and Fixing of PVC water storage tank sintex having of capacity 1000 liters with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.

Construction of manhole with RCC top slab in 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) in side plastering 15 mm thick with cement mortar 1:3 (1cement:3 sand) finished with a floating coat of neat cement and making channel in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20 mm nominal size) including curing complete.

In side size 800 mm x 800 mm x 500 mm deep excluding CI cover with frame (light duty single seal pattern - 1) 455 mm x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (Weight of cover 23 kg and weight of frame 15 kg)

With 200 mm thick walls of brick masonry using common burunt clay building bricks in cement mortor 1:3 (1cement : 3 sand)

Providing and Fixing stoneware gully trap grade "A" complete with C.I. grating, brick masonry chamber in cement mortor 1:5 and water tight C.I. cover with frame of 300 mm x 300 mm size (inside) the weight of cover to be not less than 4.53 kg and frame to be not less than 2.72 kg. (Sqaure Mouth traps 100 mm x 100 mm size P type)

Providing and Fixing set of 3 seater 1 No+2 seater, 2 Nos. sofa set made of Teak wood / powder coated matel base,4”thk 40 density cushions on seat & back, finished with Superior quality fabric,all as per standard norms (for Main drawing roo.) total 14 seats.

Providing and Fixing sofa set 3+1+1 (5 seats) For VIP drawing room, made of teak wood/steel Frame, 40 density sleep well cushion 4” thick cushions, using superior Quality fabric

Providing and Fixing centre table 3x3 feet size,made of teak wood/matel Frame duly finished with PU polish,10mm thick bevelled edge clear Glass on top complete Drawing room,VIP Drg room

Providing and Fixing side table/service table 18x18” Glass top,wooden Frame.Drawing room, VIP Drg room

Providing and Fixing 8 seater dining table made of teak wood/matel with Glass top, 8 nos dining chairs

Providing and Fixing Chairs for waiting lobby (G+F. Floor)

Providing and Fixing double bed suitable for 75” Long mattress with side tables 16x16x18” size Made of teak wood frame & teak ply ,without box , finished with PU wall nut shade Polish, with 4 feet high & 1.5” thick back, teak wood beading On all cut edges complete. VIP bed rooms

Providing and Fixing double bed suitable for 75” Long mattress with side tables 16x16x18” size Made of teak wood frame & teak ply ,without box , finished with PU wall nut shade Polish, with 4 feet high & 1.5” thick back, teak wood beading On all cut edges complete. For Guestroom 2 Nos.

Providing and Fixing cot 3x6 feet made of steel frame and 19mm board On top. ( for driver room+chowkidar)

Providing and Fixing centre table 4x2 feet size With teak wood frame P.U. polished, with 8mm thick Glass top.

Providing and Fixing teak wood easy room chair Finished with 40 density sleep well cushion, superior fabric & PU polish complete Guest rms=2x2=4nos

Providing and Fixing computer/study chair Revolving executive type (Godrej make) For VIP bed room

Providing and Fixing sleepwell/godrej mattresses 75x35x6” thick)

Providing and Fixing sleepwell /godrej mattresses (75x35x4 “ thick pair)

Providing pillows(686x432x100mm) Complete in all respect.

Providing bed sheets with pillow cover (double bed size) 3+3 stand by

Providing single bed sheet with pillow cover Complete in all respect.

Providing bed cover for VIP. Bed room Complete in all respect.

Providing white sheet cotton type.Complete in all respect.

Providing double bed quilts with cover Poly-fill type.for VIP Bed 1+1 as stand by. Complete in all respect.

Providing single bed quilts with cover Poly-fill type.for VIP Bed 1+1 as stand by

Providing blankets (single bed) Complete in all respect.

Providing and Fixing room curtains made of superior Polyster embroidered sheer fabric,av.length Of curtain 260 cms,withs.s. eyelet rings Complete in all respect.

Providing and Fixing 25 mm diaJindel( JARDOS)make Stainless steel curtain rod, stainless steel heavy brackets 100 mm Size with stainless steel side ends 50mm dia. Complete in all respect.

Providing room heater piller type 1500 watt. Each with heavy Reflector( Bajaj/Usha make) Complete in all respect.

Providing set of bathroom bucket(20 ltrs),mug, Patra,soap dish ,harpik toilet cleaner ,toilet Brush etc(milton make) Complete in all respect.

Providing hand towel 40x60cms Complete in all respect.

Providing bath towel 120x60 cms size Complete in all respect.

Providing PVC. Dust bin Padel type operation For Rooms and toilets. Complete in all respect.

Providing table coster Complete in all respect.

Providing small sized foot mat for rooms/toilet Complete in all respect.

Providing fine bon china Dinner set for VIP room 2 set Complete in all respect.

Providing fine bon china tea set for VIP rm Complete in all respect.

Providing glass water glasses Complete in all respect.

Providing portable PVC chairs( Cello make) Complete in all respect.

Providing Hangers for cup boards Complete in all respect.

Providing Usha make room heat Convector Complete in all respect.

Providing room carpet (cushion type) 180x120 size) hand made for VIP room Complete in all respect.

Providing 90x60 cms decorative room paintings Complete in all respect.

Providing and Fixing water cooler 40 ltrs capacity(ISI Blue star) Complete in all respect.

Providing and Fixing double door refrigrator (panasonic, LG, Godrej etc 350 ltrs Complete in all respect.

Providing and Fixing 40” LED TELEVISION reputed make (Drg.+ 3 rooms) Complete in all respect.

Providing and Fixing Water purifier Aqua guard/kenth( RO-UV) Complete in all respect.

Providing LPG connection (commercial) DBC Complete in all respect.

Providing LPG connection domestic (chowkidar) DBC Complete in all respect.

Providing LPG burner ( 4 burnered) Complete in all respect.

Providing LPG burner 2 burnered Complete in all respect.

Providing following kitchen items:

Pressure cooker 10 ltr Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Pressure cooker 5 ltr Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Pressure cooker 3 ltr Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Large aluminium pans large 50 ltrs(ALU.0) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Large aluminium pans Medium (SS) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Tea pans (SS) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Service tray 45x30xms (Alu) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Spoons Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Dinner set melmoware (Lapola) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Tea set Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Tea cups (Hotel series) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Water glasses 225 ML Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Service spoons (SS) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Water Jug (SS) 1.500 ltrs cap. Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Steel tumbler Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Karchhi (M-L-S) 2 each) as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Knives Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Full rice plates (melmoware) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Qtr plates Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Service bowls Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Chakla,Belna,Tava,Tea seave & Misc: small kitchen items Emty Plastic jars (iltr) Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

SS. Grain storage basket 20ltr Drum Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Stainless steel full plates Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Fry Pan Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

Karahi Complete in all respect as per the direction and to the entire satisfaction of the Engineer-in-Charge.

DEVENDER KUMAR GOVT CONTRACTOR