FDR/Mtc. of road from Srinagar to Manughat Via Amlighat during the year 2026-27/ SH - Laying of Paver Block, GSB etc, Ch (8.00 to 10.00 km)

Granular Sub-base with Well Graded Material (Table 400.1) using Jhama Brick Aggregate (A) By Mix in Place Method Construction of granular sub-base by providing well graded material (Jhama Brick Aggregate, Grading-I, as per Table 400.1, spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per MoRD Technical Specification Clause 401.

80 mm thick factory made c.c. interlocking paver block of M-35 Grade Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge: (a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern

Providing concrete for plain concrete (using jhama brick aggregate) in open foundations complete including form work as per drawing & MoRD technical specifications Clauses 802,803, 900,1202 & 1203. (including centring, shuttering, staging etc. but excluding reinforcement). I. PCC grade M10 (using jhama brick aggregate) (i) Nominal mix 1:3.6

Manufacturing & supplying of machine made 4 mm G.I. wire crates chain link type size of cage 1500 mm. X 600 mm. X 450 mm. having square mesh of 80mm. X 80mm. including carrying to the work site as per direction of the Engineer-in charge (Weight of each cage shall not be less than 7.80 kg)

Supplying and stacking mixed class brick bats (50% first class & 50% un-class) including carriage loading & unloading at the site of work complete as per direction of the Engineer-in-charge

Labour charge for filling/packing of mixed class brick bats in S.W.G PVC wire crates of size of 1500 mm. X 600 mm. X 450 mm. fastening with SWG GI wire and placing in river bed/slope properly as per direction of the Engg-in-Charge.

Providing and placing gunny/polythene(of minimum wall thickness of 500 mm micron) bags filled with sand (of minimum qty of 0.034cum ) and properly manually stitched to avoid any leakage of sand as per spcification.

Road side Pucca Drains Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregate) to specified lines, grades, levels and dimensions as per approved design and MoRD Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. (including centering, shuttering, etc. but excluding reinforcement) B.Trapezoidal drain (top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mm)I. In Ordinary Soil

Construction of embankment with Materials Obtained from Borrow Pits. Construction of Embankment with approved material obtained from borrows pits with a lift up to 1.50m,transperting to site,spreading,grading to required slope and compathing to meet requirement of Table 300.1 and 300.2 with a lead up to 1000m as per MoRD Technical specification clause 301.5.