Strengthening of Road (Resurfacing Work on 45.00M and 24.00M wide road from Gol chakkar to B-14, Grand Street Mall to Bijli ghar and ETT tower to B-19 and raising of drain, covering of drain and laying of tile in Sector-132) Noida

CAPABILITY STATEMENT

* It is compulsory for the bidder to fill this statement and the bidder must upload only those document that support this statement

Tender Reference No :- 06/DGM(C)/SM-WC-09/ET/2025-26 Select

Name of Work:- Strengthening of Road (Resurfacing Work on 45.00M & 24.00M wide road from Gol chakkar to B-14, Grand Street Mall to Bijli ghar & ETT tower to B-19 & Raising of drain, covering of drain and Laying of tile in Sector-132) Noida Provided

Name of Tenderer Not Provided

TOTAL NIT COST OF PROJECT (In Rs.) _-* #,##0.07_-;\-* #,##0.07_-;_-* "-"??_-;_-@_-

S. NO. ELIGIBILITY CRITERIA (Value To Be Filled By the Tenderer (In Indian Rs.) Status FINAL STATUS QUALIFIED

1 SOLVENCY (Issued within a period of minimum six months). 40% OF TOTAL ESTIMATED COST NOT QUALIFIED NOT QUALIFIED

2 EXPERIENCE (WITH GOVERNMENT/SEMI- GOVERNEMTN/ PSUs ONLY) completed works during the last 7 years ending last day of the month previous to the one in which applications are invited Three similar completed works each costing not less than the amount equal to 40% of estimated cost put to tender NOT QUALIFIED

Two similar completed works each costing not less than the amount equal to 60% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

One similar completed works costing not less than the amount equal to 80% of estimated cost put to tender NOT QUALIFIED NOT QUALIFIED

For Similar of works:- Experience of having successfully completed works of resurfacing and Mastic work. Experience of Other Road work will not be entertained. Hot mix plant should be on the name of the company.

RESULT OF EXPERIENCE NOT QUALIFIED

3 TURNOVER (During the immediate LAST 3 consecutive financial years) 30% OF TOTAL ESTIMATED COST

YEAR1 0 NOT QUALIFIED NOT QUALIFIED

Average annual financial turnover on construction works should be atleast 30% of the estimate cost during the immediate last 3 consecutive fiancial years. Affidavit should be submitted by the contractor/ firm with C.A. certificate.

4 Required Technical Staff Select

5 Required Machinary Select

6 Character Certificate of Indivisual /partners /directors issued by District Megistrate Select

7 Affidavit of not blacklisted Select

8 Address Proof/Id. Proof of indivisual /partners/directors. Select

9 Registration certificate of G.S.T.Department Select

10 Filled in form Capability Statement. Select

11 Certified Copies of relevant pages of following documents: Select

a) Memorandum and Article of Association showing objectives of the Company / firm and authority to sign the e-Bid/contract or delegate the power to others for signing the e-Bid/contract. Select

b) Place of registration. Select

c) The power-of-attorney authorizing the tenderer to sign the e-Bid/ contract. Select

d) PAN certificate of the company/firm. Select

e) G.S.T. registration certificate of the company/firm. Select

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: DGM (Civil), Sector-6, Noida

Name of Work :- Strengthening of Road (Resurfacing Work on 45.00M & 24.00M wide road from Gol chakkar to B-14, Grand Street Mall to Bijli ghar & ETT tower to B-19 & Raising of drain, covering of drain and Laying of tile in Sector-132) Noida

Contract No: 06/DGM(C)/SM-WC-09/ET/2025-26

GST:- GST shall be paid extra as per norms.

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means over areas ( exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out adn disposal of excavated earth. lead upto 50m and lift upto 1.5m, as directed by Engineer-in-charge. The contractor has detect Different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation only after getting permission of Engineer-in-charge All kinds of soil cum Excess(+) Full Conversion INR

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contractor has to detect diffrent utilities like sewar line ,Water supply line ,Electric cable,Telephone cable, Gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of engineer in charge All kinds of soil. cum Excess(+) Full Conversion INR

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 cement : 2 coarse sand (Zone-III) drived from natural sources : 4 graded stone aggregate 20 mm nominal size drived from natural sources) cum Excess(+) Full Conversion INR

Brick work with Common Brunt clay F.P.S( Non-modular) bricks of class designation 100 in foundation and plinth in:Cement mortar 1:4 (1 cement :4 coarse sand) cum Excess(+) Full Conversion INR

Centering and shuttering including strutting, ropping etc. and removal of form work for : Foundations, footings, bases for columns sqm Excess(+) Full Conversion INR

12 mm cement plaster of mix:1:4 (1 cement: 4 coarse sand) sqm Excess(+) Full Conversion INR

Neat cement punning sqm Excess(+) Full Conversion INR

Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways, neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick, 100 mm wide MS sheet duly painted over priming coat, reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. sqm Excess(+) Full Conversion INR

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. Sqm Excess(+) Full Conversion INR

Construction of granular sub-base by providing close graded material, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compaction with vibratory roller to achieve the desired density, complete as per clause 401 cum Excess(+) Full Conversion INR

Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. sqm Excess(+) Full Conversion INR

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rates of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. sqm Excess(+) Full Conversion INR

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled , vibratory and tandem rollers to achieve the dsired compaction as per MORTH specification clause No. 505 complete in all respects. cum Excess(+) Full Conversion INR

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level adn alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects cum Excess(+) Full Conversion INR

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (Zone-III) drived from natural sources : 8 graded stone aggregate 40 mm nominal size drived from natural sources). cum Excess(+) Full Conversion INR

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. cum Excess(+) Full Conversion INR

Providing Wall putty on new surface with approved qualit material of Berger/ J.K. / Birla or similar make 2 coats. sqm Excess(+) Full Conversion INR

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work sqm Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information