supply of cutting tool

Amount

SUPPLY AND INSTALLATION OF CUTTING TOOL FOR THE UPGRADATION OF PRIORITY GITIS ACROSS UTTARAKHAND

Adjustable pipe die set BSP cover pipe size 1" or 3/4"

Centre drills 3 mm (Consumable)

Centre drills 4 mm (Consumable)

Centre drills 5 mm (Consumable)

Centre drills A 1 to 5

Centre drills No. 3, 4 & 5

Collapsible Tap with attachment

Coventry Die head

Coventry Type Die Head (Self-opening)

Die and Wrench Ø6,Ø8,Ø10,Ø12

Die for Threading Different sizes

Dies Set 3 mm to 10 mm

Drill H.S.S. taper shank (6 mm to 12 mm instep of 0.5 mm)

Drill S.S. Twist block 2 mm

Drill S.S. Twist block 5 mm

Drill S.S. Twist block 6 mm

Drill Twist (straight shank) 1.5 mm to 15 mm by 0.5mm

Drill Twist (straight shank) 1.5 mm to 8 mm by 0.5mm

Drill Twist (straight shank) 3 mm to 12 mm by 0.5 mm H.S.S.

Drill Twist (straight shank) 3 mm to 12 mm by 1 mm H.S.S.

Drill Twist (straight shank) 3 mm to 13 mm by 0.5 mm H.S.S.

Drill Twist (straight shank) 3mm

Drill Twist (straight shank) 3mm to 6mm

Drill Twist (straight shank) 4 mm to 12 mm in step of 0.5 mm H.S.S.

Drill Twist (straight shank) 4mm

Drill Twist (straight shank) 6mm

Drill Twist (Taper shank) 14 mm to 20mm by 1 mm

Drill Twist (Taper shank) 8 mm to 20 mm by 0.5 mm H.S.S.

Hand Chaser M-12 & M-16 (External)

Hand Chaser M-12 & M-16 (Internal)

Hand keyway breacher

Hand reamer 6 to 16mm in steps of 1 mm

Hand Reamer set (Taper pin straight flute) Nominal Dia. 6, 8, 10, 12, 16mm

Hand reamers adjustable 10.5 to 11.25 mm, 11.25 to 12.75mm, 12.75 to 14.25 mm and 14.25to 15.75 mm

Indexable boring bar with inserts

Involute Gear cutter Size 2,2.5,3 module 20° pressure angle

Lapping plate Dia 6"

Machine Chaser M-12 to M-21

Machine reamer 6 mm to 25 mm by 1 mm

Machine reamer 6 to 16mm in steps of 1 mm

Machine Reamer parallel (Helical flute) 12 - 16mm set of 5.

Milling Cutter -Concave Ø 63 x 6 radius x 27 mm Bore Diameter

Milling Cutter -Convex Ø 63 x 6 radius x 27 mm Bore Diameter

Milling Cutter -Cylindrical Cutter Ø 63 mm, 90 mm Length and 27 mm Bore Diameter

Milling Cutter -Cylindrical Cutter Ø 63 x 70 x Ø 27 mm

Milling Cutter -Cylindrical Cutter Ø 80 mm, 90 mm Length and 27 mm Bore Diameter

Milling Cutter -Double Angle Unequal Cutter 50 X 12 X 27mm bore dia 55˚

Milling Cutter -Double Angle Unequal Cutter 50 X 12 X 27mm bore dia 60˚

Milling Cutter -Double Angle Unequal Cutter 63 X 18 X 27mm bore dia 70˚

Milling Cutter -Double AngleUnequal Cutter 63 X 18 X 27mm bore dia 75˚

Milling Cutter -Equal Angle Cutter 45˚/100 mm x 27mm bore dia

Milling Cutter -Equal Angle Cutter 60˚/100 mm x 27mm bore dia

Milling Cutter -Equal Angle Cutter 90˚/100 mm 27 mmbore dia

Milling Cutter -Parallel Shank endmills Ø 6, Ø 10 and Ø 16are (double fluted), Ø 20 mm & Ø 25mm(four fluted)

Milling Cutter -Shell End Mill Ø 50 x 36 x 27 mm, Preferably InsertedTip Type

Milling Cutter -Shell End Mill Ø 75 mm x 50 x 27 mm, PreferablyInserted Tip Type

Milling Cutter -Side and face cutter dia 100 X 10 X 27mm

Milling Cutter -Side and face cutter dia 160 X 16 X 27mm

Milling Cutter -Side and face cutter dia 200 X 20 X 27mm

Milling Cutter -Side and face cutter dia 80 X 8 X 27 mm

Milling Cutter -Side and face cutter Ø 80 x 10 X Ø 27 mm

Milling Cutter -Single Angle Cutter 63 x 18 x 45˚RH 27 mm bore dia

Milling Cutter -Single Angle Cutter 63 x 18 x 60˚LH 27 mm bore dia

Milling Cutter -Single Angle Cutter 63 x 18 x45˚LH 27 mm bore dia

Milling Cutter -Single Angle Cutter 63 x 18 x60˚RH 27 mm boredia

Milling Cutter -Slitting Saw Cutter Ø 100 x 6 X Ø 27mm

Milling Cutter -Slitting Saw Cutter Ø 75 x 3 X Ø 27 mm

Milling Cutter -T Slot Cutter with Parallel Shank Ø 17.5 x 8 mm Width x Diameter ofshank 8 mm

Milling Cutter-Side and face cutter dia 100 X 12 X 27mm

Milling Cutter-Side and face cutter dia Side and face cutter dia 160 X 10 X 27mm

Number drills H.S.S. (parallel shank)

Parallel shank end mills Ø10 mm

Parallel shank end mills Ø12 mm

Parallel shank end mills Ø5 mm

Parallel shank end mills Ø6 mm

Parallel shank end mills Ø8 mm

Parting Tool Holder with H.S.S. blade

Pipe stock and dies complete with stocks,bushing, bushing holders, Taps and wrenches sizes covered, to suit pipes bore dia 6, 8, 10, 20, 25, 32,40 & 50 mm

Pipe threading die with handle Ratchet type Die head of 1/2”, 3/4" and 1"

Rachet pipe die 15 mm to 32 mm

Reamer Adjustable 10 mm to 15 mm

Reamer Adjustable 10 mm to 20 mm

Set of stock and dies - Metric

Shaper indexing center

Shaper indexing centre

Shaper tool holder turret type

T slot cutter with parallel shank Ø 17.5 x 8 mm width x dia. of shank 8 mm

Tap set Different size

Tap set with matching drills 1/8” to 5/8”

Tap set with matching drills 3 mm to 16mm

Tap Wrench (adjustable) M6,M8,M10,M12

Taps and dies B.A. No. 0 to 10 in a box

Taps and dies B.S.F. up to 1 inch

Taps and dies B.S.W. up to 1 inch

Taps and dies metric 3 mm to 24 mm complete set in a box

Taps and dies metric 5 mm to 12 mm complete set in a box

Taps and wrenches Metric 5 mm to 12 mm

Taps set 3mm to 10mm

Tool Bits 12 X 150 mm sq

Trepanning tool 70mm

Woodruff key seating cutters A 13.5x3

Woodruff key seating cutters A 16x4

PURI SCIENTIFIC WORKS

Universal Engineering Equipments Corp