Providing Interior Work for mayor chamber inThoothukudi Corporation main office Campus

Amount

Removing of existing wall tiles in the toilet & disposal of debris and making the wall ready to receive new wall tiles including all Cost and conveyance and labour charges etc

Removal of the existing aluminium partiton wall with half glass and half novapan boards with one door. - stock the materials for reuse including all Cost and conveyance and labour charges etc

Removal of the existing wall panelling works and stocking the materials and reuse including all Cost and conveyance and labour charges etc

Removal of the existing false ceiling works and disposal of the materials as debris including all Cost and conveyance and labour charges etc

Removal of all existing flush doors and handing over to TMC office, main door, PA Door, Dressing Door and bathroom door including all Cost and conveyance and labour charges etc

Refixing the existing wall panel materials same at higher level for covering the fixed glass structure across all the places in Mayor room, dressing room, PA room and Waiting area - all old materials are reused and in additon new 25mm thermocoal boards are supplied and fixed to between the fixed glass and the partical board sheets including all Cost and conveyance and labour charges etc

Refixing of the Aluminimum partition in the temporary mayor room in second floor - all old materialsand new materials are used from existing room including all Cost and conveyance and labour charges etc

Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962 including all Cost and conveyance and labour charges etc

Supply and fixing of Wall panelling works with 50mm x 25mm aluminium hollow box section as vertical and horizontal frames and fixing the same over the masnory wall with aluniumium clamps for line & levels , fill the insulation of 25mm thick and fix 12mm thick water Proof plywood using self tapping screws and completing the works as per standard Industry practices. the works as per standard Industry practices including all Cost and conveyance and labour charges etc

Supplying and laying Glass Wool for insulation including necessary packing materials Using 25mm thick Glass Wool inside of Wall Pannelling including all Cost and conveyance and labour charges etc

Supplying and laying Gyspum Borad Over the wall Panelling including all Cost and conveyance and labour charges etc

Supply and fixing of Oranamental design tek Wood beadings and other areas including all Cost and conveyance and labour charges etc

Plain area Beading

Design Beading

Supply and fixing of window and Door Ornamenta larch decoration work using water wood plywood , OST Vineer design by ornamental tek wood beading including all Cost and conveyance and labour charges etc

Supply and fixing of main door external side Temple type arch decoration work using water wood plywood , OST Vineer design by ornamental tek wood beading including all Cost and conveyance and labour charges etc

Supply & Fixing of Suspended 12 mm thick Gypsum board false ceiling in position as per approved drawing design with properties of waterproof & fire resistance with proper GI suspension system & as per manufacturing specification ,including GI corner ,all other accessories. joint taping , finishing compound including all cut outs for light fittings ,air conditioning grills ,diffusers , trap doors etc. Complete. GI Framing will be as per Gypsum ceiling including all Cost and conveyance and labour charges etc

Plain area

Design area

Supply & Fixing Grid false ceiling 600x600 mm ceiling tiles of classic tile micro finish false ceiling with 44 mm high sithoutte black grooves main runner and cross tee with 3 mm reveal each with suspension hingers with spacing no larger than 400 mm and 15 mm width black groove channel and classic tile board Make Amstrong including all Cost and conveyance and labour charges etc

Supply & Fixing digital printing transperant glasss arrangement of size 600 x600 mm 6mm thickness including all Cost and conveyance and labour charges etc

Providing Cornice Work for Gyp Board False Ceiling and wall joining location and fixing the same with self tapping screws including all Cost and conveyance and labour charges etc

Supply & fixing of 12mm thick Plywood partition Covered by aluminium frameof size 65 x40mm including all accessories, door closer, lock, handle e.t.c.., and complete as per standard specifications including all Cost and conveyance and labour charges etc

Supply & fixing of glass Window 6mm thick Covered by wooden frames including all accessories and complete as per standard specifications including all Cost and conveyance and labour charges etc

Supply and delivery of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick, Labour wrought and put up in position Shutters for fully panelled doors internal five plywood panels including labour charges for fixing furniture fittings complying with standard drawings and standard specification and Labour charges for fixing doors alongwith frames in position etc., complete including all Cost and conveyance and labour charges etc

Supply and Fixing of Vertical Blinds including all Cost and conveyance and labour charges etc

Window Curtain Installation of the Window Curtains with coated aluminium tube of 38 mm diameter with provision curtains to fit in all with Sticker Flim at window complete as per drawing and instructions including all Cost and conveyance and labour charges etc

Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. (jaquar Brand) including all Cost and conveyance and labour charges etc

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications (jaquar Brand) including all Cost and conveyance and labour charges etc

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements including all Cost and conveyance and labour charges etc

Suppling and fixing in position shower arm bath fittings of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary (Make jaquar) including all Cost and conveyance and labour charges etc

Suppling and fixing in position Pillar tap bath fittings of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary (Make jaquar) including all Cost and conveyance and labour charges etc

Internal Water Supply - CPVC pipe ratio 11 Supplying laying and jointing CPVC pipe of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges including all cost conveyance and labour charges etc .

Paving the floor with design Antiskirt Vertified tiles (colour and shade as directed) of size 600mm x 600mm x 8 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement including all cost conveyance and labour charges etc

Dadooing walls with Glazed tiles of sizes 1200 X600 mm X 8mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed including all cost conveyance and labour charges etc .

providing and finishing of PU Polishing works over the wooden Surface including all cost conveyance and labour charges etc

providing and finishing of PU Polishing works over the wooden Surface including all cost conveyance and labour charges etc Beading polish

Painting the wall with Texture Finish Paint including labour charges over the Gyspum board including all cost conveyance and etc

Painting two coats with ready mixed Interior Plastic Emulsion Paint approved quality and colour with Primer for Plastic Emulsion Paint, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification including all cost conveyance and etc

Painting Two Coat with Ready Mixed Enamel Paint over the Old Iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and delivery and fixing of Wall Clock Colour wooden and silver material mirror Size 16 inc product including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of Touch Screen Mirror - Providing of a Frame less mirror 16"x24" rectangular in size and Silver colour including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of Name board for PA and waiting room including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of Embalam - Tuticorin corporation emabalam including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of glass arrangement for Oranamental Showcase - including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of floor Mat Size 210cmx120cm -including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of floor Bath room Mat including all Cost and conveyance and labur charges etc

Hydraulic Door Closer of various sizes of approved quality at Main Wooden door Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) 'GAZEL' (or) Equivalent (with ISI Monogram) including all Cost and conveyance and labur charges etc

Hydraulic Door Closer of various sizes of approved quality at VIP , PC Room using Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer with Double Speed Adjustment like HARDWYN (make) 'GAZEL' (or) Equivalent (with ISI Monogram) including all Cost and conveyance and labur charges etc

Supply and delivery and fixing of Dust bins - Supply of Perforated pedal waste bin-providing & placing in position at required location perforated pedal waste bin capacity 07 litres of approved make and finish.

Supply and delivery and fixing of ornamental desigh Wall Display of Size 1200x900mm with plywood ,Form, velvet Colth with Fabric Arrangement

Supplying and laying wooden flooring at site 8mm thick ofapproved make using click laminated floor with inbuilt 3mm sound bloc class of use 31 water resistant AC 3 grade impactresistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch ResistantSurface Second Generation) on top of moisture high density fibre board substrate specially developed copr of plank size1288 x 196 x 8mm having joints tongue and groove to secure long lasting joint. The tongue and groove having theedges duly pre impregnated with par affine including laying 0.20mm thick alkali resistant polyethylene sheet of density850 kg / m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading,unloading, transportation, etc., complete

smthomaiyar and son